Search

Capture of trace benzene is an important and challenging task. Metal-organic framework materials are promising sorbents for a variety of gases, but their limited capacity towards benzene at low concentration remains unresolved. Here we report the adsorption of trace benzene by decorating a structural defect in MIL-125-defect with single-atom metal centres to afford MIL-125-X (X = Mn, Fe, Co, Ni, Cu, Zn; MIL-125, Ti 8 O 8 (OH) 4 (BDC) 6 where H 2 BDC is 1,4-benzenedicarboxylic acid). At 298 K, MIL-125-Zn exhibits a benzene uptake of 7.63 mmol g -1 at 1.2 mbar and 5.33 mmol g -1 at 0.12 mbar, and breakthrough experiments confirm the removal of trace benzene (from 5 to <0.5 ppm) from air (up to 111,000 min g -1 of metal-organic framework), even after exposure to moisture. The binding of benzene to the defect and open Zn(II) sites at low pressure has been visualized by diffraction, scattering and spectroscopy. This work highlights the importance of fine-tuning pore chemistry for designing adsorbents for the removal of air pollutants., (© 2024. The Author(s).)

The functionalization of metal-organic frameworks (MOFs) to enhance the adsorption of benzene at trace levels remains a significant challenge. Here, we report the exceptional adsorption of trace benzene in a series of zirconium-based MOFs functionalized with chloro groups. Notably, MFM-68-Cl 2 , constructed from an anthracene linker incorporating chloro groups, exhibits a remarkable benzene uptake of 4.62 mmol g -1 at 298 K and 0.12 mbar, superior to benchmark materials. In situ synchrotron X-ray diffraction, Fourier transform infrared microspectroscopy, and inelastic neutron scattering, coupled with density functional theory modeling, reveal the mechanism of binding of benzene in these materials. Overall, the excellent adsorption performance is promoted by an unprecedented cooperation between chloro-groups, the optimized pore size, aromatic functionality, and the flexibility of the linkers in response to benzene uptake in MFM-68-Cl 2 . This study represents the first example of enhanced adsorption of trace benzene promoted by -C H ···Cl and Cl···π interactions in porous materials.

The development of sustainable routes to organic building blocks is a critical endeavor for reducing the environmental impact of chemical synthesis. Biocatalysts are poised to play an important role in sustainable synthesis, as they perform highly selective reactions under mild conditions. The application of enzymes to organic synthesis requires an approach which is operationally simple, inexpensive to prepare, and reasonably scalable. In this work, we demonstrated the utility of a Type I ring-cleaving dioxygenase CatA ( P. putida KT2440) for preparative-scale synthesis of muconic acid derivatives. Muconic acids are important precursors in the synthesis of polymers and commodity chemicals. In this work, we optimized the performance of CatA under millimolar substrate concentrations and characterized the activity of the enzyme with an array of catechol substrates. Furthermore, we developed a scalable platform using cellular lysates to produce diverse muconic acids, generating up to a gram of the desired product. A simple trituration procedure was utilized for the purification of these muconic acids that obviated the need for chromatographic purification and reduced overall solvent waste.

This work reports the thermal and electron beam stabilities of a series of isostructural metal-organic frameworks (MOFs) of type MFM-300(M) (M = Al, Ga, In, Cr). MFM-300(Cr) was most stable under the electron beam, having an unusually high critical electron fluence of 1111 e - Å -2 while the Group 13 element MOFs were found to be less stable. Within Group 13, MFM-300(Al) had the highest critical electron fluence of 330 e - Å -2 , compared to 189 e - Å -2 and 147 e - Å -2 for the Ga and In MOFs, respectively. For all four MOFs, electron beam-induced structural degradation was independent of crystal size and was highly anisotropic, although both the length and width of the channels decreased during electron beam irradiation. Notably, MFM-300(Cr) was found to retain crystallinity while shrinking up to 10%. Thermal stability was studied using in situ synchrotron X-ray diffraction at elevated temperature, which revealed critical temperatures for crystal degradation to be 605, 570, 490 and 480 °C for Al, Cr, Ga, and In, respectively. The pore channel diameters contracted by ≈0.5% on desorption of solvent species, but thermal degradation at higher temperatures was isotropic. The observed electron stabilities were found to scale with the relative inertness of the cations and correlate well to the measured lifetime of the materials when used as photocatalysts., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The functionalisation of organic linkers in metal-organic frameworks (MOFs) to improve gas uptake is well-documented. Although the positive role of free carboxylic acid sites in MOFs for binding gas molecules has been proposed in computational studies, relatively little experimental evidence has been reported in support of this. Primarily this is because of the inherent synthetic difficulty to prepare MOF materials bearing free, accessible -COOH moieties which would normally bind to metal ions within the framework structure. Here, we describe the direct binding of CO 2 and C 2 H 2 molecules to the free -COOH sites within the pores of MFM-303(Al). MFM-303(Al) exhibits highly selective adsorption of CO 2 and C 2 H 2 with a high selectivity for C 2 H 2 over C 2 H 4 . In situ synchrotron X-ray diffraction and inelastic neutron scattering, coupled with modelling, highlight the cooperative interactions of adsorbed CO 2 and C 2 H 2 molecules with free -COOH and -OH sites within MFM-303(Al), thus rationalising the observed high selectivity for gas separation., Competing Interests: The authors declare no competing interest., (This journal is © The Royal Society of Chemistry.)

The development of cost-effective sorbents for direct capture of trace CO 2 (<1 %) from the atmosphere is an important and challenging task. Natural or commercial zeolites are promising sorbents, but their performance in adsorption of trace CO 2 has been poorly explored to date. A systematic study on capture of trace CO 2 by commercial faujasite zeolites reveals that the extra-framework cations play a key role on their performance. Under dry conditions, Ba-X displays high dynamic uptake of 1.79 and 0.69 mmol g -1 at CO 2 concentrations of 10000 and 1000 ppm, respectively, and shows excellent recyclability in the temperature-swing adsorption processes. K-X exhibits perfect moisture resistance, and >95 % dry CO 2 uptake can be preserved under relative humidity of 74 %. In situ solid-state NMR spectroscopy, synchrotron X-ray diffraction and neutron diffraction reveal two binding sites for CO 2 in these zeolites, namely the basic framework oxygen atoms and the divalent alkaline earth metal ions. This study unlocks the potential of low-cost natural zeolites for applications in direct air capture., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

We report reversible high capacity adsorption of SO 2 in robust Zr-based metal-organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host-guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The precipitation of hydrated phases from a chondrite-like Na-Mg-Ca-SO 4 -Cl solution is studied using in situ synchrotron X-ray powder diffraction, under rapid- (360 K h -1 , T = 250-80 K, t = 3 h) and ultra-slow-freezing (0.3 K day -1 , T  = 273-245 K, t = 242 days) conditions. The precipitation sequence under slow cooling initially follows the predictions of equilibrium thermodynamics models. However, after ∼50 days at 245 K, the formation of the highly hydrated sulfate phase Na 2 Mg(SO 4 ) 2 ·16H 2 O, a relatively recent discovery in the Na 2 Mg(SO 4 ) 2 -H 2 O system, was observed. Rapid freezing, on the other hand, produced an assemblage of multiple phases which formed within a very short timescale (≤4 min, Δ T = 2 K) and, although remaining present throughout, varied in their relative proportions with decreasing temperature. Mirabilite and meridianiite were the major phases, with pentahydrite, epsomite, hydrohalite, gypsum, blödite, konyaite and loweite also observed. Na 2 Mg(SO 4 ) 2 ·16H 2 O was again found to be present and increased in proportion relative to other phases as the temperature decreased. The results are discussed in relation to possible implications for life on Europa and application to other icy ocean worlds., (© Stephen P. Thompson et al. 2021.)

We report the reversible adsorption of ammonia (NH 3 ) up to 9.9 mmol g -1 in a robust Al-based metal-organic framework, MFM-303(Al), which is functionalized with free carboxylic acid and hydroxyl groups. The unique pore environment decorated with these acidic sites results in an exceptional packing density of NH 3 at 293 K (0.801 g cm -3 ) comparable to that of solid NH 3 at 193 K (0.817 g cm -3 ). In situ synchrotron X-ray diffraction and inelastic neutron scattering reveal the critical role of free -COOH and -OH groups in immobilizing NH 3 molecules. Breakthrough experiments confirm the excellent performance of MFM-303(Al) for the capture of NH 3 at low concentrations under both dry and wet conditions.

The metal-organic framework (Me 2 NH 2 ) 2 [Cd(NO 2 BDC) 2 ] (SHF-81) comprises flattened tetrahedral Cd(O 2 CR) 4 2- nodes, in which Cd(ii) centres are linked via NO 2 BDC 2- ligands (2-nitrobenzene-1,4-dicarboxylate) to give a doubly interpenetrated anionic network, with charge balanced by two Me 2 NH 2 + cations per Cd centre resident in the pores. The study establishes that this is a twinned α-quartz-type structure (trigonal, space group P3 x 21, x = 1 or 2), although very close to the higher symmetry β-quartz arrangement (hexagonal, P6 x 22, x = 2 or 4) in its as-synthesised solvated form [Cd(NO 2 BDC) 2 ]·2DMF·0.5H 2 O (SHF-81-DMF). The activated MOF exhibits very little N 2 uptake at 77 K, but shows significant CO 2 uptake at 273-298 K with an isosteric enthalpy of adsorption (ΔH ads ) at zero coverage of -27.4 kJ mol -1 determined for the MOF directly activated from SHF-81-DMF. A series of in situ diffraction experiments, both single-crystal X-ray diffraction (SCXRD) and powder X-ray diffraction (PXRD), reveal that the MOF is flexible and exhibits breathing behaviour with observed changes as large as 12% in the a- and b-axes (|Δa|, |Δb| < 1.8 Å) and 5.5% in the c-axis (|Δc| < 0.7 Å). Both the solvated SHF-81-DMF and activated/desolvated SHF-81 forms of the MOF exhibit linear negative thermal expansion (NTE), in which pores that run parallel to the c-axis expand in diameter (a- and b-axis) while contracting in length (c-axis) upon increasing temperature. Adsorption of CO 2 gas at 298 K also results in linear negative expansion (Δa, Δb > 0; Δc < 0; ΔV > 0). The largest change in dimensions is observed during activation/desolvation from SHF-81-DMF to SHF-81 (Δa, Δb < 0; Δc > 0; ΔV < 0). Collectively the nine in situ diffraction experiments conducted suggest the breathing behaviour is continuous, although individual desolvation and adsorption experiments do not rule out the possibility of a gating or step at intermediate geometries that is coupled with continuous dynamic behaviour towards the extremities of the breathing amplitude.

Coastal plain streams in the southeastern United States supply carbon that supports important coastal ecosystems, but the effects of urbanization on carbon export from these streams have not been extensively studied. This study aimed to determine how urbanization changes coastal plain stream organic matter quality, rates of carbon export, and dissolved oxygen dynamics that have implications for stream ecosystem function. Organic matter quality, organic carbon export, and dissolved oxygen concentrations were measured for multiple years (2009 & 2013-2015) in North Carolina coastal plain streams that spanned a gradient of urbanization. Based on spectral characteristics, dissolved organic matter (DOM) quality appeared to shift from characteristic blackwater in minimally impacted streams to clear streamwater in urban streams due to large reductions in chromophoric DOM concentrations, aromaticity, and molecular weight. Differences in spectral indices and characteristics of dissolved organic carbon export suggest that urbanization reduced natural sources of DOM and provided various urban sources of DOM that were likely more bioavailable. Particulate organic matter in the urban streams was indicative of more labile autochthonous sources than that of the less impacted streams, and rates of particulate carbon export increased and shifted to higher flows with watershed impervious surface cover. Diel variation of dissolved oxygen increased with watershed impervious surface cover, indicating that urbanization and associated changes in carbon and nutrient cycling altered stream function. While the effects of urbanization on carbon export were similar to previous studies in other regions, the unique blackwater state of natural streams and receiving waters in the study area make them especially susceptible to negative ecological impacts from altered carbon and nutrient export. Management actions that conserve or restore natural carbon sources to the stream may help mitigate multiple negative effects of urbanization in southeastern US coastal plain streams., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Temperature- or pressure-swing sorption in porous metal-organic framework (MOF) materials has been proposed for new gas separation technologies. The high tunability of MOFs toward particular adsorbates and the relatively low energy penalty for system regeneration indicate that reversible physisorption in MOFs has the potential to create economic and environmental benefits compared with state-of-the-art chemisorption systems. However, for MOF-based sorbents to be commercialized, they have to show long-term stability under the conditions imposed by the application. Here, we demonstrate the structural stability of MFM-300(Al) in the presence of a series of industrially relevant toxic and corrosive gases, including SO 2 , NO 2 , and NH 3 , over 4 years using long-duration synchrotron X-ray powder diffraction. Full structural analysis of gas-loaded MFM-300(Al) confirms the retention of these toxic gas molecules within the porous framework for up to 200 weeks, and cycling adsorption experiments verified the reusability of MFM-300(Al) for the capture of these toxic air pollutants.

Stormwater control measures (SCMs) have the potential to mitigate negative effects of watershed development on hydrology and water quality. Stormwater regulations and scientific literature have assumed that SCMs are important sites for denitrification, the permanent removal of nitrogen, but this assumption has been informed mainly by short-term loading studies and measurements of potential rates of nitrogen cycling. Recent research concluded that SCM nitrogen removal can be dominated by plant and soil assimilation rather than by denitrification, and rates of nitrogen fixation can exceed rates of denitrification in SCM sediments, resulting in a net addition of nitrogen. Nitrogen cycling measurements from other human-impacted aquatic habitats have presented similar results, additionally suggesting that dissimilatory nitrate reduction to ammonium (DNRA) and algal uptake could be important processes for recycling nitrogen in SCMs. Future research should directly measure a suite of nitrogen cycling processes in SCMs and reveal controlling mechanisms of individual rate processes. There is ample opportunity for research on SCM nitrogen cycling, including investigations of seasonal variation, differences between climatic regions, and trade-offs between nitrogen removal and phosphorus removal. Understanding nitrogen dynamics within SCMs will inform more efficient SCM design and management that promotes denitrification to help mitigate negative effects of urban stormwater on downstream ecosystems., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Liquid oceans and ice caps, along with ice crusts, have long been considered defining features of the Earth, but space missions and observations have shown that they are in fact common features among many of the solar system's outer planets and their satellites. Interactions with rock-forming materials have produced saline oceans not dissimilar in many respects to those on Earth, where mineral precipitation within frozen seawater plays a significant role in both determining global properties and regulating the environment in which a complex ecosystem of extremophiles exists. Since water is considered an essential ingredient for life, the presence of oceans and ice on other solar system bodies is of great astrobiological interest. However, the details surrounding mineral precipitation in freezing environments are still poorly constrained, owing to the difficulties of sampling and ex situ preservation for laboratory analysis, meaning that predictive models have limited empirical underpinnings. To address this, the design and performance characterization of a transmission-geometry sample cell for use in long-duration synchrotron X-ray powder diffraction studies of in situ mineral precipitation from aqueous ice-brine systems are presented. The cell is capable of very slow cooling rates ( e.g. 0.3°C per day or less), and its performance is demonstrated with the results from a year-long study of the precipitation of the hydrated magnesium sulfate phase meridianiite (MgSO 4 ·11H 2 O) from the MgSO 4 -H 2 O system. Evidence from the Mars Rover mission suggests that this hydrated phase is widespread on the present-day surface of Mars. However, as well as the predicted hexagonal ice and meridianiite phases, an additional hydrated sulfate phase and a disordered phase are observed.

Wet ponds are a common type of stormwater control measure (SCM) in coastal areas of the southeastern US, but their internal nitrogen dynamics have not been extensively studied. Using flow-through intact sediment core incubations, net sediment N 2 fluxes before and after a nitrate addition from five wet ponds spanning a range of ages (3.25-10years old) were quantified through membrane inlet mass spectrometry during early summer. Multiple locations within a single wet pond (6.16years old) were also sampled during ambient conditions in late summer to determine the combined effects of depth, vegetation, and flow path position on net N 2 fluxes at the sediment-water interface. All pond sediments had considerable rates of net nitrogen fixation during ambient conditions, and net N 2 fluxes during nitrate-enriched conditions were significantly correlated with pond age. Following a nitrate addition to simulate storm conditions, younger pond sediments shifted towards net denitrification, but older ponds exhibited even higher rates of net nitrogen fixation. The pond forebay had significantly higher rates of net nitrogen fixation compared to the main basin, and rates throughout the pond were an order of magnitude higher than the early summer experiment. These results identify less than optimal nitrogen processing in this common SCM, however, data presented here suggest that water column mixing and pond sediment excavation could improve the capacity of wet ponds to enhance water quality by permanently removing nitrogen., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Understanding the behaviour of flexible metal-organic frameworks (MOFs)-porous crystalline materials that undergo a structural change upon exposure to an external stimulus-underpins their design as responsive materials for specific applications, such as gas separation, molecular sensing, catalysis and drug delivery. Reversible transformations of a MOF between open- and closed-pore forms-a behaviour known as 'breathing'-typically occur through well-defined crystallographic transitions. By contrast, continuous breathing is rare, and detailed characterization has remained very limited. Here we report a continuous-breathing mechanism that was studied by single-crystal diffraction in a MOF with a diamondoid network, (Me 2 NH 2 )[In(ABDC) 2 ] (ABDC, 2-aminobenzene-1,4-dicarboxylate). Desolvation of the MOF in two different solvents leads to two polymorphic activated forms with very different pore openings, markedly different gas-adsorption capacities and different CO 2 versus CH 4 selectivities. Partial desolvation introduces a gating pressure associated with CO 2 adsorption, which shows that the framework can also undergo a combination of stepped and continuous breathing.

A new synchrotron X-ray powder diffraction instrument has been built and commissioned for long-duration experiments on beamline I11 at Diamond Light Source. The concept is unique, with design features to house multiple experiments running in parallel, in particular with specific stages for sample environments to study slow kinetic systems or processes. The instrument benefits from a high-brightness X-ray beam and a large area detector. Diffraction data from the commissioning work have shown that the objectives and criteria are met. Supported by two case studies, the results from months of measurements have demonstrated the viability of this large-scale instrument, which is the world's first dedicated facility for long-term studies (weeks to years) using synchrotron radiation.

The coordination polymers [Ag4 (O2 CCF3 )4 (phen)3 ]⋅ phen⋅arene (1⋅phen⋅arene) (phen=phenazine; arene=toluene, p-xylene or benzene) have been synthesised from the solution phase in a series of arene solvents and crystallographically characterised. By contrast, analogous syntheses from o-xylene and m-xylene as the solvent yield the solvent-free coordination polymer [Ag4 (O2 CCF3 )4 (phen)2 ] (2). Toluene, p-xylene and benzene have been successfully used in mixed-arene syntheses to template the formation of coordination polymers 1⋅phen⋅arene, which incorporate o- or m-xylene. The selectivity of 1⋅phen⋅arene for the arene guests was determined, through pairwise competition experiments, to be p-xylene>toluene≈benzene>o-xylene>m-xylene. The largest selectivity coefficient was determined as 14.2 for p-xylene:m-xylene and the smallest was 1.0 for toluene:benzene., (© 2016 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

The reactions between metal borohydrides and elemental sulfur are investigated in situ during thermal treatment and are found to be highly exothermic (up to 700 J g(-1)). These reactions are exceptionally rapid, occurring below 200 °C, also resulting in the sudden release of substantial quantities of hydrogen gas. For NaBH4 this hydrogen release is pure, with no detectable levels of H2S or B2H6. The reaction results in the formation of an array of metal-boron-sulfur compounds. These MBH4-S compounds are interesting for possible uses in high energy applications (fuels or explosives), hydrogen generation, and metal-boron-sulfur precursors.

Despite an absence of conventional porosity, the 1D coordination polymer [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 ] (1; TMP=tetramethylpyrazine) can absorb small alcohols from the vapour phase, which insert into AgO bonds to yield coordination polymers [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 (ROH)2 ] (1-ROH; R=Me, Et, iPr). The reactions are reversible single-crystal-to-single-crystal transformations. Vapour-solid equilibria have been examined by gas-phase IR spectroscopy (K=5.68(9)×10(-5) (MeOH), 9.5(3)×10(-6) (EtOH), 6.14(5)×10(-5) (iPrOH) at 295 K, 1 bar). Thermal analyses (TGA, DSC) have enabled quantitative comparison of two-step reactions 1-ROH→1→2, in which 2 is the 2D coordination polymer [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)2 ] formed by loss of TMP ligands exclusively from singly-bridging sites. Four polymorphic forms of 1 (1-A(LT) , 1-A(HT) , 1-B(LT) and 1-B(HT) ; HT=high temperature, LT=low temperature) have been identified crystallographically. In situ powder X-ray diffraction (PXRD) studies of the 1-ROH→1→2 transformations indicate the role of the HT polymorphs in these reactions. The structural relationship between polymorphs, involving changes in conformation of perfluoroalkyl chains and a change in orientation of entire polymers (A versus B forms), suggests a mechanism for the observed reactions and a pathway for guest transport within the fluorous layers. Consistent with this pathway, optical microscopy and AFM studies on single crystals of 1-MeOH/1-A(HT) show that cracks parallel to the layers of interdigitated perfluoroalkyl chains develop during the MeOH release/uptake process., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Desolvated zeolitic imidazolate framework ZIF-4(Zn) undergoes a discontinuous porous to dense phase transition on cooling through 140 K, with a 23 % contraction in unit cell volume. The structure of the non-porous, low temperature phase was determined from synchrotron X-ray powder diffraction data and its density was found to be slightly less than that of the densest ZIF phase, ZIF-zni. The mechanism of the phase transition involves a cooperative rotation of imidazolate linkers resulting in isotropic framework contraction and pore space minimization. DFT calculations established the energy of the new structure relative to those of the room temperature phase and ZIF-zni, while DSC measurements indicate the entropic stabilization of the porous room temperature phase at temperatures above 140 K., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A family of one-dimensional coordination polymers, [Ag4(O2C(CF2)2CF3)4(phenazine)2(arene) n ]·m(arene), 1 (arene = toluene or xylene), have been synthesized and crystallographically characterized. Arene guest loss invokes structural transformations to yield a pair of polymorphic coordination polymers [Ag4(O2C(CF2)2CF3)4(phenazine)2], 2a and/or 2b , with one- and two-dimensional architectures, respectively. The role of pre-organization of the polymer chains of 1 in the selectivity for formation of either polymorph is explored, and the templating effect of toluene and p-xylene over o-xylene or m-xylene in the formation of arene-containing architecture 1 is also demonstrated. The formation of arene-free phase 2b , not accessible in a phase-pure form through other means, is shown to be the sole product of loss of toluene from 1-tol·tol [Ag4(O2C(CF2)2CF3)4(phenazine)2(toluene)]·2(toluene), a phase containing toluene coordinated to Ag(I) in an unusual μ:η(1),η(1) manner. Solvent-vapour-assisted conversion between the polymorphic coordination polymers and solvent-vapour influence on the conversion of coordination polymers 1 to 2a and 2b is also explored. The transformations have been examined and confirmed by X-ray diffraction, NMR spectroscopy and thermal analyses, including in situ diffraction studies of some transformations.

Rationale: Imaging mass spectrometry is a powerful analytical technique capable of accessing a large volume of spatially resolved, chemical data from two-dimensional samples. Probing the entire surface of a sample simultaneously requires a detector with high spatial and temporal resolutions, and the ability to observe events relating to different mass-to-charge ratios., Methods: A commercially available time-of-flight mass spectrometer, designed for matrix-assisted laser desorption/ionization (MALDI) analysis, was combined with the novel pixel imaging mass spectrometry (PImMS) camera in order to perform multi-mass, microscope-mode imaging experiments. A number of minor modifications were made to the spectrometer hardware and ion optics so that spatial imaging was achieved for a number of small molecules., Results: It was shown that a peak width of Δm50 %  <  1  m/z unit across the range 200 ≤ m/z  ≤  800 can be obtained while also achieving an optimum spatial resolution of 25 µm. It was further shown that these data were obtained simultaneously for all analytes present without the need to scan the experimental parameters., Conclusions: This work demonstrates the capability of multi-mass, microscope-mode imaging to reduce the acquisition time of spatially distributed analytes such as multi-arrays or biological tissue sections. It also shows that such an instrument can be commissioned by effecting relatively minor modifications to a conventional commercial machine., (Copyright © 2014 John Wiley & Sons, Ltd.)

Ab initio molecular dynamics (AIMD) simulations have been used to predict structural transitions of the breathing metal-organic framework (MOF) MIL-53(Sc) in response to changes in temperature over the range 100-623 K and adsorption of CO2 at 0-0.9 bar at 196 K. The method has for the first time been shown to predict successfully both temperature-dependent structural changes and the structural response to variable sorbate uptake of a flexible MOF. AIMD employing dispersion-corrected density functional theory accurately simulated the experimentally observed closure of MIL-53(Sc) upon solvent removal and the transition of the empty MOF from the closed-pore phase to the very-narrow-pore phase (symmetry change from P2(1)/c to C2/c) with increasing temperature, indicating that it can directly take into account entropic as well as enthalpic effects. We also used AIMD simulations to mimic the CO2 adsorption of MIL-53(Sc) in silico by allowing the MIL-53(Sc) framework to evolve freely in response to CO2 loadings corresponding to the two steps in the experimental adsorption isotherm. The resulting structures enabled the structure determination of the two CO2-containing intermediate and large-pore phases observed by experimental synchrotron X-ray diffraction studies with increasing CO2 pressure; this would not have been possible for the intermediate structure via conventional methods because of diffraction peak broadening. Furthermore, the strong and anisotropic peak broadening observed for the intermediate structure could be explained in terms of fluctuations of the framework predicted by the AIMD simulations. Fundamental insights from the molecular-level interactions further revealed the origin of the breathing of MIL-53(Sc) upon temperature variation and CO2 adsorption. These simulations illustrate the power of the AIMD method for the prediction and understanding of the behavior of flexible microporous solids.

A series of univalent cation forms of zeolite Rho (M(9.8)Al(9.8)Si(38.2)O(96), M = H, Li, Na, K, NH(4), Cs) and ultrastabilized zeolite Rho (US-Rho) have been prepared. Their CO(2) adsorption behavior has been measured at 298 K and up to 1 bar and related to the structures of the dehydrated forms determined by Rietveld refinement and, for H-Rho and US-Rho, by solid state NMR. Additionally, CO(2) adsorption properties of the H-form of the silicoalumino-phosphate with the RHO topology and univalent cation forms of the zeolite ZK-5 were measured for comparison. The highest uptakes at 0.1 bar, 298 K for both Rho and ZK-5 were obtained on the Li-forms (Li-Rho, 3.4 mmol g(-1); Li-ZK-5, 4.7 mmol g(-1)). H- and US-Rho had relatively low uptakes under these conditions: extra-framework Al species do not interact strongly with CO(2). Forms of zeolite Rho in which cations occupy window sites between α-cages show hysteresis in their CO(2) isotherms, the magnitude of which (Na(+),NH(4)(+) < K(+) < Cs(+)) correlates with the tendency for cations to occupy double eight-membered ring sites rather than single eight-membered ring sites. Hysteresis is not observed for zeolites where cations do not occupy the intercage windows. In situ synchrotron X-ray diffraction of the CO(2) adsorption on Na-Rho at 298 K identifies the adsorption sites. The framework structure of Na-Rho "breathes" as CO(2) is adsorbed and desorbed and its desorption kinetics from Na-Rho at 308 K have been quantified by the Zero Length Column chromatographic technique. Na-Rho shows much higher CO(2)/C(2)H(6) selectivity than Na-ZK-5, as determined by single component adsorption, indicating that whereas CO(2) can diffuse readily through windows containing Na(+) cations, ethane cannot.

The crystal structure of NaNbO(3) has been studied in detail in the temperature regime 360 < T < 520 °C using a combination of high-resolution neutron and synchrotron X-ray powder diffraction, supported by first-principles calculations. A systematic symmetry-mode analysis is used to determine the presence of the key active distortion modes that, in turn, provides a small and an unambiguous set of trial structural models. A unique model for Phase S (480 < T < 510 °C) is elucidated, having a 2 × 2 × 4 superlattice of the aristotype perovskite structure, space group Pmmn. This unusual and unique structure features a novel example of a compound octahedral tilt system in a perovskite. Two possible structural models for Phase R (370 < T < 470 °C) are determined, each having a 2 × 2 × 6 superlattice and differing only in the nature of the complex tilt system along the 'long' axis. It is impossible to identify a definitive model from the present study, although reasons for preferring one over the other are discussed. Some of the possible pitfalls in determining such complex, pseudosymmetric crystal structures from powder diffraction data are also highlighted.

The scandium analogue of the flexible terephthalate MIL-53 yields a novel closed pore structure upon removal of guest molecules which has unusual thermal behaviour and stepwise opening during CO(2) adsorption. By contrast, the nitro-functionalised MIL-53(Sc) cannot fully close and the structure possesses permanent porosity for CO(2).

The crystal structure of the small pore scandium terephthalate Sc(2)(O(2)CC(6)H(4)CO(2))(3) (hereafter Sc(2)BDC(3), BDC = 1,4-benzenedicarboxylate) has been investigated as a function of temperature and of functionalization, and its performance as an adsorbent for CO(2) has been examined. The structure of Sc(2)BDC(3) has been followed in vacuo over the temperature range 140 to 523 K by high resolution synchrotron X-ray powder diffraction, revealing a phase change at 225 K from monoclinic C2/c (low temperature) to Fddd (high temperature). The orthorhombic form shows negative thermal expansivity of 2.4 × 10(-5) K(-1): Rietveld analysis shows that this results largely from a decrease in the c axis, which is caused by carboxylate group rotation. (2)H wide-line and MAS NMR of deuterated Sc(2)BDC(3) indicates reorientation of phenyl groups via π flips at temperatures above 298 K. The same framework solid has also been prepared using monofunctionalized terephthalate linkers containing -NH(2) and -NO(2) groups. The structure of Sc(2)(NH(2)-BDC)(3) has been determined by Rietveld analysis of synchrotron powder diffraction at 100 and 298 K and found to be orthorhombic at both temperatures, whereas the structure of Sc(2)(NO(2)-BDC)(3) has been determined by single crystal diffraction at 298 K and Rietveld analysis of synchrotron powder diffraction at 100, 298, 373, and 473 K and is found to be monoclinic at all temperatures. Partial ordering of functional groups is observed in each structure. CO(2) adsorption at 196 and 273 K indicates that whereas Sc(2)BDC(3) has the largest capacity, Sc(2)(NH(2)-BDC)(3) shows the highest uptake at low partial pressure because of strong -NH(2)···CO(2) interactions. Remarkably, Sc(2)(NO(2)-BDC)(3) adsorbs 2.6 mmol CO(2) g(-1) at 196 K (P/P(0) = 0.5), suggesting that the -NO(2) groups are able to rotate to allow CO(2) molecules to diffuse along the narrow channels., (© 2011 American Chemical Society)

The commissioning and performance characterization of a position-sensitive detector designed for fast X-ray powder diffraction experiments on beamline I11 at Diamond Light Source are described. The detecting elements comprise 18 detector-readout modules of MYTHEN-II silicon strip technology tiled to provide 90° coverage in 2θ. The modules are located in a rigid housing custom designed at Diamond with control of the device fully integrated into the beamline data acquisition environment. The detector is mounted on the I11 three-circle powder diffractometer to provide an intrinsic resolution of Δ2θ approximately equal to 0.004°. The results of commissioning and performance measurements using reference samples (Si and AgI) are presented, along with new results from scientific experiments selected to demonstrate the suitability of this facility for powder diffraction experiments where conventional angle scanning is too slow to capture rapid structural changes. The real-time dehydrogenation of MgH(2), a potential hydrogen storage compound, is investigated along with ultrafast high-throughput measurements to determine the crystallite quality of different samples of the metastable carbonate phase vaterite (CaCO(3)) precipitated and stabilized in the presence of amino acid molecules in a biomimetic synthesis process.

Crystalline microporous cobalt and nickel bisphosphonates with a hexagonal array of one-dimensional channels 1.8 nm in diameter have been prepared hydrothermally and provide the first example of the use of isoreticular chemistry in the synthesis of phosphonate metal-organic frameworks. The materials contain both physisorbed and coordinating water molecules in the as-prepared form, but these can be removed to give permanent extra-large microporosity, with pore volumes of up to 0.68 cm(3) g(-1), and coordinatively unsaturated sites, with concentrations up to 4.25 mmol g(-1).

A Time of flight (ToF) mass spectrometer suitable in terms of sensitivity, detector response and time resolution, for application in fast transient Temporal Analysis of Products (TAP) kinetic catalyst characterization is reported. Technical difficulties associated with such application as well as the solutions implemented in terms of adaptations of the ToF apparatus are discussed. The performance of the ToF was validated and the full linearity of the specific detector over the full dynamic range was explored in order to ensure its applicability for the TAP application. The reported TAP-ToF setup is the first system that achieves the high level of sensitivity allowing monitoring of the full 0-200 AMU range simultaneously with sub-millisecond time resolution. In this new setup, the high sensitivity allows the use of low intensity pulses ensuring that transport through the reactor occurs in the Knudsen diffusion regime and that the data can, therefore, be fully analysed using the reported theoretical TAP models and data processing.

A number of commercially available waxes in the form of thin disc samples have been investigated as possible diffraction intensity standards for macromolecular crystallography synchrotron beamlines. Synchrotron X-ray powder diffraction measurements show that beeswax offers the best performance of these waxes owing to its polycrystallinity. Crystallographic lattice parameters and diffraction intensities were examined between 281 and 309 K, and show stable and predictable thermal behaviour. Using an X-ray beam of known incident flux at lambda = 1 A, the diffraction power of two strong Bragg reflections for beeswax were quantified as a function of sample thickness and normalized to 10(10) photons s(-1). To demonstrate its feasibility as a diffraction intensity standard, test measurements were then performed on a new third-generation macromolecular crystallography synchrotron beamline.

Assimilation of inorganic N by photoautotrophs has positive impacts on nutrient retention; however this retention is only temporary. As the biomass senesces, organic and inorganic forms of N are released back to the stream where they can be further transformed (i.e., nitrification, denitrification) or exported downstream. The purpose of this study was to assess the fate of the remineralized N, particularly the potential for removal by denitrification. Experiments were conducted on intact sediment cores from streams in an agricultural watershed. Cores were amended with varying ages of algal leachate and denitrification rates were measured with a membrane inlet mass spectrometer. Results of this study demonstrated that senescing algal biomass stimulated denitrification rates and provided a source of N and labile C to denitrifiers. Regardless of leachate age, addition of leachate to intact cores revealed a net loss of dissolved inorganic N from the water column. Denitrification rates were most strongly related to concentrations of dissolved and particulate C in the overlying water and secondarily to C quality (molar C to N ratio of total dissolved C and N) and NO(3)(-) flux. Using a mass balance approach, the proportion of N from senescing algal biomass that was denitrified accounted for as much as 10% of the total dissolved nitrogen (TDN) and up to 100% of the NO(3)(-) during a 3-h experiment. These results suggest an important link between instream algal uptake and eventual denitrification thereby providing a pathway for permanent removal of watershed-derived N from the stream ecosystem.

A novel High-Throughput Continuous Hydrothermal (HiTCH) flow synthesis reactor was used to make directly and rapidly a 66-sample nanoparticle library (entire phase diagram) of nanocrystalline Ce(x)Zr(y)Y(z)O(2-delta) in less than 12 h. High resolution PXRD data were obtained for the entire heat-treated library (at 1000 degrees C/1 h) in less than a day using the new robotic beamline I11, located at Diamond Light Source (DLS). This allowed Rietveld-quality powder X-ray diffraction (PXRD) data collection of the entire 66-sample library in <1 day. Consequently, the authors rapidly mapped out phase behavior and sintering behaviors for the entire library. Out of the entire 66-sample heat-treated library, the PXRD data suggests that 43 possess the fluorite structure, of which 30 (out of 36) are ternary compositions. The speed, quantity and quality of data obtained by our new approach, offers an exciting new development which will allow structure-property relationships to be accessed for nanoceramics in much shorter time periods.

The performance characteristics of a new synchrotron x-ray powder diffraction beamline (I11) at the Diamond Light Source are presented. Using an in-vacuum undulator for photon production and deploying simple x-ray optics centered around a double-crystal monochromator and a pair of harmonic rejection mirrors, a high brightness and low bandpass x-ray beam is delivered at the sample. To provide fast data collection, 45 Si(111) analyzing crystals and detectors are installed onto a large and high precision diffractometer. High resolution powder diffraction data from standard reference materials of Si, alpha-quartz, and LaB6 are used to characterize instrumental performance.

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) has unique capabilities in the area of high-resolution mass spectrometric imaging of biological samples. The technique offers parallel detection of native and non-native molecules at physiological concentrations with potentially submicrometer spatial resolution. Recent advances in SIMS technology have been focused on generating new ion sources that can in turn be used to eject more intact molecular and biological characteristic species from a sample. The introduction of polyatomic ion beams, particularly C60, for TOF-SIMS analysis has created a whole new application of molecular depth profiling and 3D molecular imaging. However, such analyses, particularly at high lateral resolution, are severely hampered by the accompanying mass spectrometry associated with current TOF-SIMS instruments. Hence, we have developed an instrument that overcomes many of the drawbacks of current TOF-SIMS spectrometers by removing the need to pulse the primary ion beam. The instrument samples the secondary ions using a buncher that feeds into a specially designed time-of-flight analyzer. We have validated this new instrumental concept by analyzing a number of biological samples generating 2D and 3D images showing molecular localization on a subcellular scale, over a practical time frame, while maintaining high mass resolution. We also demonstrate large area mapping and the MS/MS capability of the instrument.

The design and performance characterization of a new light-weight and compact X-ray scintillation detector is presented. The detectors are intended for use on the new I11 powder diffraction beamline at the third-generation Diamond synchrotron facility where X-ray beams of high photon brightness are generated by insertion devices. The performance characteristics of these detection units were measured first using a radioactive source (efficiency of detection and background count rate) and then synchrotron X-rays (peak stability, light yield linearity and response consistency). Here, the results obtained from these tests are reported, and the suitability of the design for the Diamond powder beamline is demonstrated by presenting diffraction data obtained from a silicon powder standard using a prototype multicrystal analyser stage.

Four experiments examined the development of property induction on the basis of causal relations. In the first 2 studies, 5-year-olds, 8-year-olds, and adults were presented with triads in which a target instance was equally similar to 2 inductive bases but shared a causal antecedent feature with 1 of them. All 3 age groups used causal relations as a basis for property induction, although the proportion of causal inferences increased with age. Subsequent experiments pitted causal relations against featural similarity in induction. It was found that adults and 8-year-olds, but not 5-year-olds, preferred shared causal relations over strong featural similarity as a basis for induction. The implications for models of inductive reasoning and development are discussed.

A detailed NMR study of the thiopeptide amythiamicin D establishes its solution conformation and the presence of a single intramolecular hydrogen bond involving NH13 and O28, and also provides the first evidence for self-association of thiopeptides in solution.

Streams alter the concentration of nutrients they transport and thereby influence nutrient loading to estuaries downstream; however, the relationship between in-stream uptake, discharge variability, and subsequent nutrient export is poorly understood. In this study, in-stream N and P uptake were examined in the stream network draining a row-crop agricultural operation in coastal North Carolina. The effect of in-stream nutrient uptake on estuarine loading was examined using continuous measurements of watershed nutrient export. From August to December 2003, 52 and 83% of the NH4+ and PO4(3-) loads were exported during storms while concurrent storm flow volume was 34% of the total. Whole-ecosystem mass transfer velocities (Vf) of NH4+ and PO4(3-), measured using short-term additions of inorganic nutrients, ranged from 0.1 to 25 mm min(-1). Using a mass balance approach, this in-stream uptake was found to attenuate 65 to 98% of the NH4+ flux and 78 to 98% of the PO4(3-) flux in small, first-order drainage ditches. For the larger channel downstream, an empirical model based on Vf and discharge was developed to estimate the percentage of the nutrient load retained in-stream. The model predicted that all of the upstream NH4+ and PO4(3-) load was retained during base flow, while 65 and 37% of the NH4+ and PO4(3-) load was retained during storms. Remineralization from the streambed (vs. terrestrial sources) was the apparent source of NH4+ and PO4(3-) to the estuary during base flow. In-stream uptake reduced the dissolved inorganic N to dissolved inorganic P ratio of water exported to the N-limited estuary, thus limiting the potential for estuarine phytoplankton growth.

The thiopeptide (or thiostrepton) antibiotics are a class of sulfur containing highly modified cyclic peptides with interesting biological properties, including reported activity against MRSA and malaria. Described herein is the total synthesis of the thiopeptide natural product amythiamicin D, which utilizes a biosynthesis-inspired hetero-Diels-Alder route to the pyridine core of the antibiotic as a key step. Preliminary studies using a range of serine-derived 1-ethoxy-2-azadienes established that hetero-Diels-Alder reaction with N-acetylenamines proceeded efficiently under microwave irradiation to give 2,3,6-trisubstituted pyridines. The thiazole building blocks of the antibiotic were obtained by either classical Hantzsch reactions or by dirhodium(II)-catalyzed chemoselective carbene N-H insertion followed by thionation, and were combined to give the bis-thiazole that forms the left-hand fragment of the antibiotic. The key Diels-Alder reaction of a tris-thiazolyl azadiene with benzyl 2-(1-acetylaminoethenyl)thiazole-4-carboxylate gave the core tetrathiazolyl pyridine, which was elaborated into the natural product by successive incorporation of glycine and bis-thiazole fragments followed by macrocyclization.

[reaction: see text] The treatment of chiral trans-disubstituted and trisubstituted 2,3-epoxy-1-bromides with an excess of dimethylsulfonium methylide 1 affords the corresponding 1,3-butadien-2-ylmethanols in good to excellent yields via a double one-carbon homologation.