Search

The meniscus serves important load-bearing functions and protects the underlying articular cartilage. Unfortunately, meniscus tears are common and impair the ability of the meniscus to distribute loads, increasing the risk of developing osteoarthritis. Therefore, surgical repair of the meniscus is a frequently performed procedure; however, repair does not always prevent osteoarthritis. This is hypothesized to be due to altered joint loading post-injury and repair, where the functional deficit of the meniscus prevents it from performing its role of distributing forces. The objective of this study was to quantify joint kinematics in an intact joint, after a meniscus root tear, and after suture repair in cadaveric porcine knees, a frequently used in vivo model. We utilized an magnetic resonance images-compatible loading device and novel use of a T1 vibe sequence to measure meniscus and femur displacements under physiological axial loads. We found that anterior root tear led to large meniscus displacements under physiological axial loading and that suture anchor repair reduced these displacements but did not fully restore intact joint kinematics. After tear and repair, the anterior region of the meniscus moved posteriorly and medially as it was forced out of the joint space under loading, while the posterior region had small displacements as the posterior attachment acted as a hinge about which the meniscus pivoted in the axial plane. Methods from this study can be applied to assess altered joint kinematics following human knee injuries and evaluate repair strategies aimed to restore joint kinematics.

Intervertebral disc degeneration is a leading cause of chronic low back pain. Cell-based strategies that seek to treat disc degeneration by regenerating the central nucleus pulposus hold significant promise, but key challenges remain. One of these is the inability of therapeutic cells to effectively mimic the performance of native nucleus pulposus cells, which are unique amongst skeletal cell types in that they arise from the embryonic notochord. In this study we use single cell RNA sequencing to demonstrate emergent heterogeneity amongst notochord-derived nucleus pulposus cells in the postnatal mouse disc. Specifically, we established the existence of early and late stage nucleus pulposus cells, corresponding to notochordal progenitor and mature cells, respectively. Late stage cells exhibited significantly higher expression levels of extracellular matrix genes including aggrecan, and collagens II and VI, along with elevated TGF-β and PI3K-Akt signaling. Additionally, we identified Cd9 as a novel surface marker of late stage nucleus pulposus cells, and demonstrated that these cells were localized to the nucleus pulposus periphery, increased in numbers with increasing postnatal age, and co-localized with emerging glycosaminoglycan-rich matrix. Finally, we used a goat model to show the Cd9+ nucleus pulposus cell numbers decrease with moderate severity disc degeneration, suggesting that these cells are associated with maintenance of the healthy nucleus pulposus extracellular matrix. Improved understanding of the developmental mechanisms underlying regulation of ECM deposition in the postnatal NP may inform improved regenerative strategies for disc degeneration and associated low back pain.

The meniscus serves important load-bearing functions and protects the underlying articular cartilage. Unfortunately, meniscus tears are common and impair the ability of the meniscus to distribute loads, greatly increasing the risk for developing osteoarthritis. Therefore, surgical repair of the meniscus is a frequently performed procedure; however, this repair does not always prevent osteoarthritis. This is hypothesized to be due to altered joint loading post injury and repair, where the functional deficit of the meniscus prevents it from performing its role of distributing forces. However, many studies of meniscus function required opening the joint, which alters kinematics. The objective of this study was to use novel MRI methods to image the intact joint under axial load and measure the acute meniscus and femur displacements in an intact joint, after a meniscus root tear, and after suture repair in the porcine knee, a frequently used in vivo model. We found that anterior root tear led to large meniscus and femur displacements under physiological axial loading, and that suture anchor repair reduced these displacements, but did not fully restore intact joint kinematics. After tear and repair, the anterior region of the meniscus moved posteriorly and medially as it was forced out of the joint space under loading, while the posterior region had small displacements as the posterior attachment acted as a hinge about which the meniscus rotated in the axial plane. This technique can be applied to evaluate the effect of knee injuries and to develop improved repair strategies to restore joint kinematics.

Conventional treatment for intervertebral disc herniation alleviates pain but does not repair the annulus fibrosus (AF), resulting in a high incidence of recurrent herniation and persistent disfunction. The lack of repair and the acute inflammation that arise after injury further compromises the disc and can result in disc-wide degeneration in the long term. To address this clinical need, we developed tension-activated repair patches (TARPs) for annular repair and the local delivery of bioactive anti-inflammatory factors. TARPs transmit physiologic strains to mechanically-activated microcapsules (MAMCs) embedded within, which activate and release encapsulated biomolecules in response to physiologic loading. Here, we demonstrate that the TARP design modulates implant biomechanical properties and regulates MAMC mechano-activation. Next, the FDA-approved anti-inflammatory molecule, interleukin 1 receptor antagonist, Anakinra, was loaded in TARPs and the effects of TARP-mediated annular repair and Anakinra delivery was evaluated in a model of annular injury in the goat cervical spine. TARPs showed robust integration with the native tissue and provided structural reinforcement at the injury site that prevented disc-wide aberrant remodeling resulting from AF detensioning. The delivery of Anakinra via TARP implantation improved the retention of disc biochemical composition through increased matrix deposition and retention at the site of annular injury. Anakinra delivery additionally attenuated the inflammatory response associated by scaffold implantation, decreasing osteolysis in adjacent vertebrae and preserving disc cellularity and matrix organization throughout the AF. These results demonstrate the translational and therapeutic potential of this novel TARP system for the treatment of intervertebral disc herniations.One Sentence SummaryTension-activated repair patches delivering bioactive anti-inflammatory factors improve healing in an in vivo goat cervical disc injury model.

Given its complex shape and relatively small size, the trapezium surface at the trapeziometacarpal (TMC) joint is a particularly attractive target for anatomic biologic joint resurfacing, especially given its propensity to develop osteoarthritis, and the limited and sub-optimal treatment options available. For this to advance to clinical translation, however, an appropriate large animal model is required. In this study, we explored the porcine accessory carpal bone (ACB) as a model for the human trapezium. We characterized ACB anatomy, geometry, joint and tissue-scale mechanics, and composition across multiple donors. We showed that the ACB is similar both in size, and in the saddle shape of the main articulating surface to the human trapezium, and that loads experienced across each joint are similar. Using this information, we then devised a fabrication method and workflow to produce patient-specific tissue-engineered replicas based on CT scans, and showed that when such replicas are implanted orthotopically in an ex vivo model, normal loading is restored. Data from this study establish the porcine ACB as a model system in which to evaluate function of engineered living joint resurfacing strategies. STATEMENT OF SIGNIFICANCE: Biologic joint resurfacing, or the replacement of a joint with living tissue as opposed to metal and plastic, is the holy grail of orthopaedic tissue engineering. However, despite marked advances in engineering native-like osteochondral tissues and in matching patient-specific anatomy, these technologies have not yet reached clinical translation. Given its propensity for developing osteoarthritis, as well as its small size and complex shape, the trapezial surface of the trapeziometacarpal joint at the base of the thumb presents a unique opportunity for pursuing a biologic joint resurfacing strategy. This work establishes the porcine accessory carpal bone as an animal model for the human trapezium and presents a viable test-bed for evaluating the function of engineered living joint resurfacing strategies.

Spectral CT has been increasingly implemented clinically for its better characterization and quantification of materials through its multi-energy results. It also facilitates calculation of physical density utilizing the Alvarez-Macovski model without approximations. These spectral physical density quantifications allow for non-invasive mass measurements and temperature evaluations by manipulating the definition of physical density and thermal volumetric expansion, respectively. To develop the model, original and parametrized versions of the Alvarez-Macovski model and electron density-physical density model were validated with a phantom. The best physical density model was then implemented on clinical spectral CT scans of ex vivo bovine muscle to determine the accuracy and effect of acquisition parameters on mass measurements. In addition, the relationship between physical density and changes in temperature was evaluated by scanning and subjecting the tissue to a range of temperatures. A linear fit utilizing the thermal volumetric expansion was performed to assess the correlation. The parametrized Alvarez-Macovski model performed best in both model development and validation with errors within ±0.02 g/mL. As observed with muscle, physical density was not significantly affected by dose and acquisition mode but was slightly affected by collimation. These effects were also reflected in mass measurements, which demonstrated accuracy with a maximum percent error of 0.34%, further validating the physical density model. Furthermore, physical density was strongly correlated (R of 0.9781) to temperature changes through thermal volumetric expansion. Accurate and precise spectral physical density quantifications enable non-invasive mass measurements for pathological detection and temperature evaluation for thermal therapy monitoring in interventional oncology.

Background: General anesthesia in rabbits is associated with higher morbidity and mortality relative to other mammalian species commonly anesthetized. Unique challenges related to endotracheal intubation (ETI) in rabbits contribute to this risk.Objective: To improve the safety of ETI in rabbits, we developed two new ETI methods using a supraglottic airway device (v-gel®) to facilitate ETI and compared them to traditional “blind” technique. We hypothesized that relative to blind ETI, v-gel® guided ETI provides more successful placement of the endotracheal tube (ETT) in a shorter time. Outcomes included number of intubation attempts, time for achievement of ETI, endoscopic findings, and serial arterial blood gas (ABG) analysis.Study Design: Prospective, randomized, and crossover study.Methods: Ten female, New Zealand White rabbits aged 1–2 years old, weighing 4.3 ± 0.4 kg, were anesthetized four times. Each time, ETI was performed with one of the following techniques: Method 1: v-gel® guided, polypropylene catheter facilitated, intubation using a cuffed ETT; Method 2: v-gel® guided intubation using an uncuffed ETT directly inserted through the device airway channel; Method 3 and 4: Blind intubation with uncuffed or cuffed ETT. Upper airway endoscopy was performed before intubation attempts and after extubation. Serial ABG analysis was performed during the peri-intubation process.Results: V-gel® guided techniques allowed successful ETI on the initial attempt for 9/10 subjects using Method 1 and 10/10 using Method 2. Relative to the v-gel® guided techniques, the blind techniques required more intubation attempts. A median of 2 attempts (range 1–4, p < 0.007) were required for the uncuffed ETT, and a median of 4 (range 1–4, p < 0.001) attempts were performed for the cuffed ETT. The time to perform successful ETI was positively correlated with the number of attempts (ρ = 0.82), while successful ETI was negatively correlated with number of attempts (ρ = −0.82). Endoscopic findings showed mild to moderate laryngeal trauma. In the absence of oxygen supplementation, ABG analysis demonstrated low PaO2, while PaCO2 remained consistent.Conclusions: Facilitated ETI using the v-gel® guided techniques allows for the rapid establishment of a secure airway to provide ventilatory support for rabbits undergoing general anesthesia.

Objective The aim of this study was to describe the signalment, clinical presentation, diagnostic findings, medical and surgical treatment and outcome of 22 farm animals diagnosed with a vertebral fracture or luxation. Study design Medical records of 22 farm animals (7 goats, 6 alpacas, 5 cattle, 3 sheep and 1 deer) were reviewed for signalment, history, presenting clinical signs and neurological examination findings, clinicopathological results, diagnostic imaging, final diagnosis, medical and surgical management, clinical progression and outcome. Results Animals' age ranged from 1 day to 15 years. Neurological examination findings included decreased motor function (20/22), recumbency (14/22), altered mentation (13/22), cranial nerve deficits (4/22) and lack of nociception (3/22). Lesions were localized to the atlanto-occipital region (2/22), C1 to C5 (7/22), C6 to T2 (4/22), T3 to L3 (3/22), and L4 to S1 (6/22). Diagnoses included vertebral fracture only (4/22), luxation only (5/22) or both vertebral fracture and luxation (13/22). In five cases, no therapy was attempted, while 12 cases were treated medically and five cases were treated surgically. Surgical interventions included manual reduction (n = 1); arthrodesis (n = 2); laminectomy (n = 1); and laminectomy with pin fixation, cerclage wire and polymethylmethacrylate bridging (n = 1). Five of the 22 cases survived to hospital discharge; two of these were treated surgically. Conclusion The cervical region was most commonly affected. Prognosis for these injuries in farm animals is guarded.

Orthopedic device-related infection (ODRI), including both fracture-related infection (FRI) and periprosthetic joint infection (PJI), remain among the most challenging complications in orthopedic and musculoskeletal trauma surgery. ODRI has been convincingly shown to delay healing, worsen functional outcome and incur significant socio-economic costs. To address this clinical problem, ever more sophisticated technologies targeting the prevention and/or treatment of ODRI are being developed and tested in vitro and in vivo. Among the most commonly described innovations are antimicrobial-coated orthopedic devices, antimicrobial-loaded bone cements and void fillers, and dual osteo-inductive/antimicrobial biomaterials. Unfortunately, translation of these technologies to the clinic has been limited, at least partially due to the challenging and still evolving regulatory environment for antimicrobial drug-device combination products, and a lack of clarity in the burden of proof required in preclinical studies. Preclinical in vivo testing (i.e. animal studies) represents a critical phase of the multidisciplinary effort to design, produce and reliably test both safety and efficacy of any new antimicrobial device. Nonetheless, current in vivo testing protocols, procedures, models, and assessments are highly disparate, irregularly conducted and reported, and without standardization and validation. The purpose of the present opinion piece is to discuss best practices in preclinical in vivo testing of antimicrobial interventions targeting ODRI. By sharing these experience-driven views, we aim to aid others in conducting such studies both for fundamental biomedical research, but also for regulatory and clinical evaluation. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:271-287, 2019.

Biofilms are typically studied in bacterial media that allow the study of important properties such as bacterial growth. However, the results obtained in such media cannot take into account the bacterial localization/clustering caused by bacteria–protein interactions in vivo and the accompanying alterations in phenotype, virulence factor production, and ultimately antibiotic tolerance. We and others have reported that methicillin-resistant or methicillin-susceptible Staphylococcus aureus (MRSA or MSSA, respectively) and other pathogens assemble a proteinaceous matrix in synovial fluid. This proteinaceous bacterial aggregate is coated by a polysaccharide matrix as is characteristic of biofilms. In this study, we identify proteins important for this aggregation and determine the concentration ranges of these proteins that can reproduce bacterial aggregation. We then test this protein combination for its ability to cause marked aggregation, antibacterial tolerance, preservation of morphology, and expression of the phenol-soluble modulin (PSM) virulence factors. In the process, we create a viscous fluid that models bacterial behavior in synovial fluid. We suggest that our findings and, by extension, use of this fluid can help to better model bacterial behavior of new antimicrobial therapies, as well as serve as a starting point to study host protein–bacteria interactions characteristic of physiological fluids.

Background: General anesthesia in rabbits is associated with higher morbidity and mortality relative to other mammalian species commonly anesthetized. Unique challenges related to endotracheal intubation (ETI) in rabbits contribute to this risk. Objective: To improve the safety of ETI in rabbits, we developed two new ETI methods using a supraglottic airway device (v-gel®) to facilitate ETI and compared them to traditional “blind” technique. We hypothesized that relative to blind ETI, v-gel® guided ETI provides more successful placement of the endotracheal tube (ETT) in a shorter time. Outcomes included number of intubation attempts, time for achievement of ETI, endoscopic findings, and serial arterial blood gas (ABG) analysis. Study Design: Prospective, randomized, and crossover study. Methods: Ten female, New Zealand White rabbits aged 1–2 years old, weighing 4.3 ± 0.4 kg, were anesthetized four times. Each time, ETI was performed with one of the following techniques: Method 1: v-gel® guided, polypropylene catheter facilitated, intubation using a cuffed ETT; Method 2: v-gel® guided intubation using an uncuffed ETT directly inserted through the device airway channel; Method 3 and 4: Blind intubation with uncuffed or cuffed ETT. Upper airway endoscopy was performed before intubation attempts and after extubation. Serial ABG analysis was performed during the peri-intubation process. Results: V-gel® guided techniques allowed successful ETI on the initial attempt for 9/10 subjects using Method 1 and 10/10 using Method 2. Relative to the v-gel® guided techniques, the blind techniques required more intubation attempts. A median of 2 attempts (range 1–4, p < 0.007) were required for the uncuffed ETT, and a median of 4 (range 1–4, p < 0.001) attempts were performed for the cuffed ETT. The time to perform successful ETI was positively correlated with the number of attempts (ρ = 0.82), while successful ETI was negatively correlated with number of attempts (ρ = −0.82). Endoscopic findings showed mild to moderate laryngeal trauma. In the absence of oxygen supplementation, ABG analysis demonstrated low PaO2, while PaCO2 remained consistent. Conclusions: Facilitated ETI using the v-gel® guided techniques allows for the rapid establishment of a secure airway to provide ventilatory support for rabbits undergoing general anesthesia.

Macro-scale changes in longitudinal bone growth resulting from mechanical loading were shown in Part 1 of this review to depend on load magnitude, anatomical location, and species. While no significant effect on longitudinal growth was observed by varying frequency and amplitude of cyclic loading, such variations, in addition to loading duration and species, were shown to affect the morphology, viability, and gene and protein expression within the growth plate. Intermittent compression regimens were shown to preserve or increase growth plate height while stimulating increased chondrocyte presence in the hypertrophic zone relative to persistent and static loading regimens. Gene and protein expressions related to matrix synthesis and degradation, as well as regulation of chondrocyte apoptosis were shown to exhibit magnitude-, frequency-, and duration-dependent responses to loading regimen. Chondrocyte viability was shown to be largely preserved within physiological bounds of magnitude, frequency, amplitude, and duration. Persistent static loading was shown to be associated with overall growth plate height in tension only, reducing it in compression, while affecting growth plate zone heights differently across species and encouraging mineralization relative to intermittent cyclic loading. Lateral loading of the growth plate, as well as microfluidic approaches are relatively understudied, and age, anatomical location, and species effects within these approaches are undefined. Understanding the micro-scale effects of varied loading regimes can assist in the development of growth modulation methods and device designs optimized for growth plate viability preservation or mineralization stimulation based on patient age and anatomical location.

This study investigated the combination of antibiotics and ultrasound triggered microbubble destruction (UTMD) to disrupt free-floating bacterial biofilms in synovial fluid (SynF) of infected joints. In vitro , 1x107 colony forming units (CFU) of S. aureus aggregated in human SynF had $100\ \mu\mathrm{L}$ of Definity® (Lantheus Medical Imaging, N Billerica, MA, USA), and $30\ \mu\mathrm{g}/\text{mL}$ of amikacin added. Samples were insonated either at a high MI of 1.06 for 10 min or a low MI of 0.04 for 6 min. In vivo , 6 pigs (mean weight 35 kg) had their left femorotibial joint inoculated with 1x106 CFU of S. aureus . A SynF sample was collected from all animals 24 hrs post-inoculation. Control animals (2) received amikacin (250 mg) into the joint, while the remaining animals received $100\ \mu\mathrm{L}$ of Definity and 1 mL of amikacin. UTMD was performed using an S9 Pro scanner with a curvilinear probe (SonoScape, Shenzhen, China) and a flash replenishment sequence ( $\text{MI} ) with 4 $s$ destructive pulses ( $\text{MI} > 0.6$ ) for the duration of contrast visualization. SynF samples were collected from all animals after the therapeutic intervention for cytological analysis and quantitative bacteriology. UTMD and antibiotics resulted in large decreases in bacterial numbers (>2-4 logs) in vitro compared to antibiotic alone. In vivo the infection protocol consistently caused clinical septic arthritis by 24 hrs post-inoculation. Nucleated cell counts and cytology parameters were all consistent with septic arthritis. Floating bacterial aggregates were occasionally observed in the joint aspirates obtained prior to UTMD. No biofloats were detected on joint aspirates obtained following intra-articular therapy and no bacterial growth was noted in any dilutions in the post-treatment SynF samples, while pre-treatment samples and amikacin only animals presented with bacterial counts of greater than 2000 CFU/mL. In conclusion, UTMD demonstrates synergism with antimicrobials against SynF biofilm aggregates.

Intervertebral disc degeneration is a cascade of cellular, structural, and biomechanical changes that is strongly implicated as a cause of low-back pain. Current treatment strategies have poor long-term efficacy as they seek only to alleviate symptoms without preserving or restoring native tissue structure and function. The objective of this study was to evaluate the efficacy of a combined triple interpenetrating network hydrogel (comprising dextran, chitosan, and teleostean) and mesenchymal stem cell (MSC) therapy targeting moderate-severity disc degeneration in a clinically relevant goat model. Degeneration was induced in lumbar discs of 10 large frame goats by injection of chondroitinase ABC. After 12 weeks, degenerate discs were treated by injection of either hydrogel alone or hydrogel seeded with allogeneic, bone marrow-derived MSCs. Untreated healthy and degenerate discs served as controls, and animals were euthanized 2 weeks after treatment. Discs exhibited a significant loss of disc height 12 weeks after degeneration was induced. Two weeks after treatment, discs that received the combined hydrogel and MSC injection exhibited a significant, 10% improvement in disc height index, as well as improvements in histological condition. Discs that were treated with hydrogel alone exhibited reduced tumor necrosis factor-α expression in the nucleus pulposus (NP). Microcomputed tomography imaging revealed that the hydrogel remained localized to the central NP region of all treated discs after 2 weeks of unrestricted activity. These encouraging findings motivate further, longer term studies of therapeutic efficacy of hydrogel and MSC injections in this large animal model. IMPACT STATEMENT: Low-back pain is the leading cause of disability worldwide, and degeneration of the intervertebral discs is considered to be one of the most common reasons for low-back pain. Current treatment strategies focus solely on alleviation of symptoms, and there is a critical need for new treatments that also restore disc structure and function. In this study, using a clinically relevant goat model of moderate-severity disc degeneration, we demonstrate that a combined interpenetrating network hydrogel and mesenchymal stem cell therapy provides acute improvements in disc height, histological condition, and local inflammation.

Bacterial colonization of synovial structures can cause infections that are difficult to treat. Systemic and local antimicrobials and repeated joint lavages are the mainstays of therapy. However, despite aggressive treatments, infection may persist, leading to significant tissue damage or death of the patient. In order to investigate the impact of bacterial culture and antimicrobial resistance on survival to discharge, we reviewed medical records of horses admitted to the University of Pennsylvania's large animal teaching hospital from 2010-2015. Two-hundred and six cases with a definitive diagnosis of septic synovitis and a synovial fluid sample submitted for microbiological culture were included in the study. Of these horses, 48% were culture negative and 52% were positive for any bacterial growth, of which 66% were gram-positive and 28% were gram-negative aerobic organisms with 4% anaerobic and 2% fungal organisms. Overall survival to discharge from hospital was 86%. Horses that had negative growth on culture were more likely to survive until discharge (p < 0.02). Multivariable analyses revealed that the likelihood of euthanasia was significantly associated with identification of coagulase positive Staphylococcus spp. (OR 7.66, 5.46-10.74, p < 0.0001), β-hemolytic Streptococcus spp. (OR 5.18, 3.56-7.55, p < 0.0001), Enterococcus spp. (OR 18.38, 11.45-29.52, p = 0.002), Enterobacteriaceae (OR 31.37, 22.28-44.17, p < 0.0001), Pseudomonas aeruginosa (OR 9.31, 5.30-16.34, p = 0.0004) or other gram-negative species (OR 3.51, 2.07-5.94, p = 0.001). Multi-drug resistance and gram-negative bacteria species were associated with significantly decreased survival rates (OR 119.24, 70.57-201.46, p < 0.0001). In conclusion, prognosis for survival to discharge was poor for horses that were infected with gram-negative organisms, particularly those with MDR phenotypes.

BACKGROUND CONTEXT Intervertebral disc (IVD) degeneration (IVDD) is implicated as a cause of low back pain. The earliest degenerative changes typically occur in the central nucleus pulposus (NP), where progressive loss of proteoglycans and associated hydration compromise tissue mechanical function. PURPOSE We developed a noncrosslinked injectable hydrogel for NP replacement and augmentation together with its percutaneous delivery method and instrument assembly. We then evaluated the short- and long-term performance of this hydrogel in a goat model of moderate IVDD. Methods Six goats underwent two percutaneous procedures: one to induce degeneration in 3 lumbar IVDs via injection of 1U C-ABC and, 2 weeks later, a second procedure for the delivery of hydrogel at 2 levels with the third remaining untreated. Animals were euthanized at 6 weeks (n=2) and 12 weeks (n=1); three animals are currently enrolled for long-term survival. Disc height index (DHI) was measured from monthly lateral radiographs in the standing animal. Postmortem, motion segments were imaged using microcomputed tomography (µCT) to assess hydrogel distribution and bone volume fraction values (BV/TV) for cranial and caudal endplates. Volumetric analysis and compression testing were performed on explanted gels. Samples were dried to determine polymer and water content. Explant characteristics were compared to nonimplanted gels. Histology was performed to assess glycosaminoglycans and collagen content, cellularity, and disc morphology. Significant changes in DHI were established using Wilcoxon matched-pairs signed ranks tests and differences in histological grades were established using Kruskal-Wallis test with post-hoc Dunn's tests (p Results Animals recovered uneventfully from surgical procedures. Extrusion of hydrogel into the spinal canal during delivery occurred in two animals without major clinical repercussions. At 2 weeks after C-ABC injection, DHI was ∼80% of pre-C-ABC levels. For IVDs treated with hydrogel, DHI improved while untreated IVDs continued to degenerate. The hydrogel presents radiographically unremarkable for up to 2 years post nucleoplasty. µCT imaging demonstrated that the majority of hydrogel was localized to the central NP. BV/TV ratio of treated levels at 6-week and 12-week endpoint were similar to controls. Explant analyses showed higher elastic moduli and polymer content compared to nonimplanted gels. Treated IVDs exhibited an overall improved histological grade compared to positive controls. Conclusions The results of this work illustrate the practical utility of an injectable hydrogel being effective in normalizing the mechanical function of the degenerating IVD in a clinically relevant animal model. The implant showed successful retention without extrusion following delivery. A critical benchmark for the success of any injectable implant to treat IVDD is the normalization of mechanical properties. We demonstrate through long-term in vivo follow up studies that hydrogel injected into degenerating goat discs can preserve the spine motion segment. There is a critical need for new therapies for patients with symptomatic disc degeneration that preserve joint mobility. A minimally invasive injectable therapy mitigates anulus fibrosus trauma during nucleoplasty and may restore the biomechanics of the motion segment. Moreover, successful biomechanical restoration of the affected motion segment may slow or prevent further IVDD. Motion preservation therapies may also help mitigate adjacent level IVDD in these patient cohorts. FDA DEVICE/DRUG STATUS This abstract does not discuss or include any applicable devices or drugs.

Objective Evaluate the analgesic properties and pharmacokinetics of transdermal fentanyl patches (TFPs) in goats. Design Prospective, randomized study. Setting Preclinical Testing Facility at a University Teaching Hospital. Animals Thirty-four adult female Boer-cross goats. Interventions Goats underwent surgery as part of a concurrent orthopedic research study. Twelve hours prior to surgery, each goat received a TFP (target dosage of 2.5 μg/kg/h), or a placebo patch with analgesia provided by buprenorphine (0.01 mg/kg, IM, q 6 h). Patches were removed after 72 hours. Blood was sampled at specified intervals, up to 84 hours following TFP placement. Plasma concentrations of fentanyl (FEN) were determined using liquid chromatography–mass spectrometry. Postoperative pain assessments were performed by two independent blinded observers. Measurements and Main Results TFPs were applied at a mean (± standard deviation, SD) dose of 2.54 ± 0.36 μg/kg/h. No adverse events occurred. Pain scores between TFP and BUP groups were not significantly different at any time point. Mean plasma FEN concentration (± SD) 2 hours following patch application was 1.06 ± 0.85 ng/mL, and remained above 0.5 ng/mL for 40 hours. Maximum mean plasma FEN concentration (Cmax) was 1.84 (ranging from 0.81 to 3.35) ng/mL with average time to maximum concentration (Tmax) of 12 hours after patch application. Conclusions TFP resulted in consistent FEN absorption and plasma concentrations within the human and ovine therapeutic ranges. Pain scores for goats administered TFP were not different than those administered buprenorphine. Ease of administration, duration of analgesia, and decreased dosing frequency make TFPs an attractive option for pain management in goats.

Degeneration of the intervertebral discs is a progressive cascade of cellular, compositional and structural changes that is frequently associated with low back pain. As the first signs of disc degeneration typically arise in the disc’s central nucleus pulposus (NP), augmentation of the NP via hydrogel injection represents a promising strategy to treat early to mid-stage degeneration. The purpose of this study was to establish the translational feasibility of a triple interpenetrating network hydrogel composed of dextran, chitosan, and teleostean (DCT) for augmentation of the degenerative NP in a preclinical goat model. Ex vivo injection of the DCT hydrogel into degenerated goat lumbar motion segments restored range of motion and neutral zone modulus towards physiologic values. To facilitate non-invasive assessment of hydrogel delivery and distribution, zirconia nanoparticles were added to make the hydrogel radiopaque. Importantly, the addition of zirconia did not negatively impact viability or matrix producing capacity of goat mesenchymal stem cells or NP cells seeded within the hydrogel in vitro. In vivo studies demonstrated that the radiopaque DCT hydrogel was successfully delivered to degenerated goat lumbar intervertebral discs, where it was distributed throughout both the NP and annulus fibrosus, and that the hydrogel remained contained within the disc space for two weeks without evidence of extrusion. These results demonstrate the translational potential of this hydrogel for functional regeneration of degenerate intervertebral discs. Statement of Significance The results of this work demonstrate that a radiopaque hydrogel is capable of normalizing the mechanical function of the degenerative disc, is supportive of disc cell and mesenchymal stem cell viability and matrix production, and can be maintained in the disc space without extrusion following intradiscal delivery in a preclinical large animal model. These results support evaluation of this hydrogel as a minimally invasive disc therapeutic in long-term preclinical studies as a precursor to future clinical application in patients with disc degeneration and low back pain.

Intervertebral disc degeneration is implicated as a leading cause of low back pain. Persistent, local inflammation within the disc nucleus pulposus (NP) and annulus fibrosus (AF) is an important mediator of disc degeneration and negatively impacts the performance of therapeutic stem cells. There is a lack of validated large animal models of disc degeneration that recapitulate clinically relevant local inflammation. We recently described a goat model of disc degeneration in which increasing doses of chondroitinase ABC (ChABC) were used to reproducibly induce a spectrum of degenerative changes. The objective of this study was to extend the clinical relevance of this model by establishing whether these degenerative changes are associated with the local expression of inflammatory cytokines and catabolic enzymes. Degeneration was induced in goat lumbar discs using ChABC at different doses. After 12 weeks, degeneration severity was determined histologically and using quantitative magnetic resonance imaging (MRI). Expression levels of inflammatory cytokines (tumor necrosis factor-α [TNF-α], interleukin-1β [IL-1β], and IL-6) and catabolic enzymes (matrix metalloproteinases-1 [MMPs-1] and 13, and a disintegrin and metalloproteinase with thrombospondin type-1 motifs-4 [ADAMTS-4]) were assessed as the percentage of immunopositive cells in the NP and AF. With the exception of MMP-1, cytokine, and enzyme expression levels were significantly elevated in ChABC-treated discs in the NP and AF. Expression levels of TNF-α, IL1-β, and ADAMTS-4 were positively correlated with histological grade, while all cytokines and ADAMTS-4 were negatively correlated with MRI T2 and T1ρ scores. These results demonstrate that degenerate goat discs exhibit elevated expression of clinically relevant inflammatory mediators, and further validate this animal model as a platform for evaluating new therapeutic approaches for disc degeneration.

Infectious arthritis is difficult to treat in both human and veterinary clinical practice. Recent literature reports Staphylococcus aureus as well as other gram-positive and gram-negative isolates forming free-floating biofilms in both human and equine synovial fluid that are tolerant to traditional antimicrobial therapy. Using an in vitro equine model, we investigated the ability of platelet-rich plasma (PRP) formulations to combat synovial fluid biofilm aggregates. Synovial fluid was infected, and biofilm aggregates allowed to form over a 2-hour period. PRP was collected and processed into different formulations by platelet concentration, leukocyte presence, and activation or lysis. Infected synovial fluid was treated with different PRP formulations with or without aminoglycoside cotreatment. Bacterial load (colony-forming unit/mL) was determined by serial dilutions and plate counting at 8 hours posttreatment. All PRP formulations displayed antimicrobial properties; however, formulations containing higher concentrations of platelets without leukocytes had increased antimicrobial activity. Lysis of PRP and pooling of the PRP lysate (PRP-L) from multiple horses as compared to individual horses further increased antimicrobial activity. This activity was lost with the removal of the plasma component or inhibition of the proteolytic activity within the plasma. Fractionation of pooled PRP-L identified the bioactive components to be cationic and low-molecular weight (

Bacterial invasion of synovial joints, as in infectious or septic arthritis, can be difficult to treat in both veterinary and human clinical practice. Biofilms, in the form of free-floating clumps or aggregates, are involved with the pathogenesis of infectious arthritis and periprosthetic joint infection (PJI). Infection of a joint containing an orthopedic implant can additionally complicate these infections due to the presence of adherent biofilms. Because of these biofilm phenotypes, bacteria within these infected joints show increased antimicrobial tolerance even at high antibiotic concentrations. To date, animal models of PJI or infectious arthritis have been limited to small animals such as rodents or rabbits. Small animal models, however, yield limited quantities of synovial fluid making them impractical for in vitro research. Herein, we describe the use of ex vivo equine and porcine models for the study of synovial fluid induced biofilm aggregate formation and antimicrobial tolerance. We observed Staphylococcus aureus and other bacterial pathogens adapt the same biofilm aggregate phenotype with significant antimicrobial tolerance in both equine and porcine synovial fluid, analogous to human synovial fluid. We also demonstrate that enzymatic dispersal of synovial fluid aggregates restores the activity of antimicrobials. Future studies investigating the interaction of bacterial cell surface proteins with host synovial fluid proteins can be readily carried out in equine or porcine ex vivo models to identify novel drug targets for treatment of prevention of these difficult to treat infectious diseases.

Tissue engineering holds great promise for the treatment of advanced intervertebral disc degeneration. However, assessment of in vivo integration and mechanical function of tissue engineered disc replacements over the long term, in large animal models, will be necessary to advance clinical translation. To that end, we developed tissue engineered, endplate-modified, disc-like angle ply structures (eDAPS) sized for the rat caudal and goat cervical spines that recapitulate the hierarchical structure of the native disc. Here, we demonstrate functional maturation and integration of these eDAPS in a rat caudal disc replacement model, with compressive mechanical properties reaching native values after 20 weeks in vivo and evidence of functional integration under physiologic loads. To further this therapy towards clinical translation, we implanted eDAPS sized for the human cervical disc space in a goat cervical disc replacement model. Our results demonstrate maintenance of eDAPS composition and structure up to 8 weeks in vivo in the goat cervical disc space, and maturation of compressive mechanical properties to match native levels. These results demonstrate the translational feasibility of disc replacement with a tissue engineered construct for the treatment of advanced disc degeneration.

Biofilm-associated implant-related bone and joint infections are clinically important due to the extensive morbidity, cost of care and socioeconomic burden that they cause. Research in the field of biofilms has expanded in the past two decades, however, there is still an immense knowledge gap related to many clinical challenges of these biofilm-associated infections. This subject was assigned to the Biofilm Workgroup during the second International Consensus Meeting on Musculoskeletal Infection held in Philadelphia USA (ICM 2018) (https://icmphilly.com). The main objective of the Biofilm Workgroup was to prepare a consensus document based on a review of the literature, prepared responses, discussion, and vote on thirteen biofilm related questions. The Workgroup commenced discussing and refining responses prepared before the meeting on day one using Delphi methodology, followed by a tally of responses using an anonymized voting system on the second day of ICM 2018. The Working group derived consensus on information about biofilms deemed relevant to clinical practice, pertaining to: (1) surface modifications to prevent/inhibit biofilm formation; (2) therapies to prevent and treat biofilm infections; (3) polymicrobial biofilms; (4) diagnostics to detect active and dormant biofilm in patients; (5) methods to establish minimal biofilm eradication concentration for biofilm bacteria; and (6) novel anti-infectives that are effective against biofilm bacteria. It was also noted that biomedical research funding agencies and the pharmaceutical industry should recognize these areas as priorities. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Orthopedic device-related infection (ODRI), including both fracture-related infection (FRI) and periprosthetic joint infection (PJI), remain among the most challenging complications in orthopedic and musculoskeletal trauma surgery. ODRI has been convincingly shown to delay healing, worsen functional outcome and incur significant socio-economic costs. To address this clinical problem, ever more sophisticated technologies targeting the prevention and/or treatment of ODRI are being developed and tested in vitro and in vivo. Among the most commonly described innovations are antimicrobial-coated orthopedic devices, antimicrobial-loaded bone cements and void fillers, and dual osteo-inductive/antimicrobial biomaterials. Unfortunately, translation of these technologies to the clinic has been limited, at least partially due to the challenging and still evolving regulatory environment for antimicrobial drug-device combination products, and a lack of clarity in the burden of proof required in preclinical studies. Preclinical in vivo testing (i.e. animal studies) represents a critical phase of the multidisciplinary effort to design, produce and reliably test both safety and efficacy of any new antimicrobial device. Nonetheless, current in vivo testing protocols, procedures, models, and assessments are highly disparate, irregularly conducted and reported, and without standardization and validation. The purpose of the present opinion piece is to discuss best practices in preclinical in vivo testing of antimicrobial interventions targeting ODRI. By sharing these experience-driven views, we aim to aid others in conducting such studies both for fundamental biomedical research, but also for regulatory and clinical evaluation. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:271–287, 2019.

Objective We have recently shown that mesenchymal stem cells (MSCs) embedded in a hyaluronic acid (HA) hydrogel and exposed to chondrogenic factors (transforming growth factor–β3 [TGF-β3]) produce a cartilage-like tissue in vitro. The current objective was to determine if these same factors could be combined immediately prior to implantation to induce a superior healing response in vivo relative to the hydrogel alone. Design Trochlear chondral defects were created in Yucatan mini-pigs (6 months old). Treatment groups included an HA hydrogel alone and hydrogels containing allogeneic MSCs, TGF-β3, or both. Six weeks after surgery, micro-computed tomography was used to quantitatively assess defect fill and subchondral bone remodeling. The quality of cartilage repair was assessed using the ICRS-II histological scoring system and immunohistochemistry for type II collagen. Results Treatment with TGF-β3 led to a marked increase in positive staining for collagen type II within defects ( P < 0.05), while delivery of MSCs did not ( P > 0.05). Neither condition had an impact on other histological semiquantitative scores ( P > 0.05), and inclusion of MSCs led to significantly less defect fill ( P < 0.05). For all measurements, no synergistic interaction was found between TGF-β3 and MSC treatment when they were delivered together ( P > 0.05). Conclusions At this early healing time point, treatment with TGF-β3 promoted the formation of collagen type II within the defect, while allogeneic MSCs had little benefit. Combination of TGF-β3 and MSCs at the time of surgery did not produce a synergistic effect. An in vitro precultured construct made of these components may be required to enhance in vivo repair in this model system.

Objective To determine (1) survival to discharge of horses with radial fractures (excluding osteochondral fragmentation of the distal aspect of the radius and stress fractures); and (2) risk factors affecting survival to hospital discharge in conservative and surgically managed fractures. Study Design Case series. Animals Horses (n = 54). Methods Medical records (1990–June 2012) and radiographs of horses admitted with radial fracture were reviewed. Horses with osteochondral fragmentation of the distal aspect of the radius or stress fractures were excluded. Evaluated risk factors were age, fracture configuration, surgical repair method, surgical duration, hospitalization time, implant failure rate, and surgical site infection (SSI) rate. Results Of 54 horses, overall survival to discharge was 50%. Thirteen (24%) were euthanatized on admission because of (1) fracture severity; (2) presence of an open fracture; or (3) financial constraints. Fourteen (26%) horses with minimally displaced incomplete fractures were conservatively managed and 12 (86%) survived to discharge. Twenty-seven (50%) horses had surgical treatment by open reduction and internal fixation (ORIF) and 15 (56%) survived to hospital discharge. Open fractures were significantly more likely to develop SSI (P = .008), which also resulted in a 17-fold increase in implant failure (P 168 minutes (P

Preclinical large animal models are essential for evaluating new tissue engineering (TE) technologies and refining surgical approaches for cartilage repair. Some preclinical animal studies, including the commonly used minipig model, have noted marked remodeling of the subchondral bone. However, the mechanisms underlying this response have not been well characterized. Thus, our objective was to compare in-vivo outcomes of chondral defects with varied injury depths and treatments.Trochlear chondral defects were created in 11 Yucatan minipigs (6 months old). Groups included an untreated partial-thickness defect (PTD), an untreated full-thickness defect (FTD), and FTDs treated with microfracture, autologous cartilage transfer (FTD-ACT), or an acellular hyaluronic acid hydrogel. Six weeks after surgery, micro-computed tomography (μCT) was used to quantitatively assess defect fill and subchondral bone remodeling. The quality of cartilage repair was assessed using the ICRS-II histological scoring system and immunohistochemistry for type II collagen. A finite element model (FEM) was developed to assess load transmission.Using μCT, substantial bone remodeling was observed for all FTDs, but not for the PTD group. The best overall histological scores and greatest type II collagen staining was found for the FTD-ACT and PTD groups. The FEM confirmed that only the FTD-ACT group could initially restore appropriate transfer of compressive loads to the underlying bone.The bony remodeling observed in this model system appears to be a biological phenomena and not a result of altered mechanical loading, with the depth of the focal chondral defect (partial vs. full thickness) dictating the bony remodeling response. The type of cartilage injury should be carefully controlled in studies utilizing this model to evaluate TE approaches for cartilage repair.

Dense fibrous connective tissues play critical load-bearing roles in the musculoskeletal system and represent a significant medical problem when their function is interrupted by progressive degeneration or acute injury. The intent of this chapter is to outline the functional aspects of two such tissues, the fibrocartilaginous knee meniscus and the annulus fibrosus of the intervertebral disc of the spine. In this chapter, we discuss the hallmark mechanical and biochemical features of each of these tissues, the incidence and most common means through which these tissues are damaged or degenerated, and the current clinical practices for their repair or replacement. Given the prevalence of damage to these tissues, numerous commercial products are, or will soon be, available in the marketplace; these products are discussed in the context of native tissue structure and function and the engineering principles and biomaterial components governing their design. Next, new products, based on tissue engineering strategies, are introduced, and their current status is explored with reference to clinical translation. Functional benchmarks, preclinical models, and evaluation tools, as well as future directions in this burgeoning field, are discussed.

The aim of this study was to develop and characterize an injectable bone void filler by incorporating baghdadite (Ca3 ZrSi2 O9 ) particles (average size of 1.7 µm) into polycaprolactone (PCL). A series of PCL composites containing different volume percentages of baghdadite [1 (PCL-1%Bag), 5 (PCL-5%Bag), 10 (PCL-10%Bag), 20 (PCL-20%Bag), and 30 (PCL-30%Bag)] were prepared, and their injectability, setting time, mechanical properties, radiopacity, degradation, and cytocompatibility were investigated. PCL, PCL-1%Bag, PCL-5%Bag, and PCL-10%Bag were able to be injected through a stainless steel syringe (Length: 9.0 mm, nozzle diameter: 2.2 mm) at 75°C at injection forces of below 1.5 kN. The core temperature of the injected material at the nozzle exit ranged between 55 and 60°C and was shown to set after 2.5-3.5 min postinjection in a 37°C environment. Injection force, melt viscosity, and radiopacity of the composites increased with increasing baghdadite content. Incorporation of 10-30 vol % baghdadite into PCL increased the compressive strength of the composites from 36 to 47.1 MPa, compared with that for pure PCL (31.4 MPa). Similar trend was found for the compressive modulus of the composites, which increased from 203.8 to 741 MPa, compared with that for pure PCL (205 MPa). Flexural strain of PCL, PCL-5%Bag, and PCL-10%Bag exceeded 30%, and PCL-10%Bag showed the highest flexural strength (29.8 MPa). Primary human osteoblasts cultured on PCL-10%Bag showed a significant upregulation of osteogenic genes compared with pure PCL. In summary, our results demonstrated that PCL-10%Bag could be a promising injectable material for orthopedic and trauma application.

Orthopedic injuries constitute the majority of wounds sustained by U.S. soldiers in recent conflicts. The risk of infection is considerable with fracture fixation devices. In this pilot study, we examined the use of unique bactericidal micron-thin sol-gel films on fracture fixation devices and their ability to prevent and eradicate infections. External fixation was studied with micron-thin sol-gel coated percutaneous pins releasing triclosan and inserted medially into rabbit tibiae. A total of 11 rabbits received percutaneous pins that were either uncoated or sol-gel/triclosan coated. Internal fracture fixation was also studied using sol-gel coated intramedullary (IM) nails releasing vancomycin in the intramedullary tibiae. Six sheep received IM nails that were coated with a sol-gel film that either contained vancomycin or did not contain vancomycin. All animals were challenged with Staphylococcus aureus around the implant. Animals were euthanized at 1 month postoperative. Rabbits receiving triclosan/sol-gel coated percutaneous pins did not show signs of infection. Uncoated percutaneous pins had a significantly higher infection rate. In the sheep study, there were no radiographic signs of osteomyelitis with vancomycin/sol-gel coated IM nails, in contrast to the observations in the control cohort. Hence, the nanostructured sol-gel controlled release technology offers the promise of a reliable and continuous delivery system of bactericidals from orthopedic devices to prevent and treat infection.