Search

International audience; Hydroxyapatite (HA) has received much interest for being used as bone substitutes because of its similarity with bioapatites. In form of nanowires or nanotubes, HA would offer more advantages such as better biological and mechanical properties than conventional particles (spherical). To date, no study had allowed the isolated nanowires production with simultaneously well-controlled morphology and size, narrow size distribution and high aspect ratio (length on diameter ratio). So, it is impossible to determine exactly the real impact of particles' size and aspect ratio on healing responses of bone substitutes and characteristics of these ones; their biological and mechanical effects can never be reproducible. By the template-assisted pulsed electrodeposition method, we have for the first time succeeded to obtain such calcium-deficient hydroxyapatite (CDHA) particles in aqueous baths with hydrogen peroxide by both applying pulsed current density and pulsed potential in cathodic electrodeposition. After determining the best conditions for CDHA synthesis on gold substrate in thin films by X-ray diffraction (XRD) and Energy dispersive X-ray spectroscopy (EDX), we have transferred those conditions to the nanowires and nanotubes synthesis with high aspect ratio going until 71 and 25 respectively. Polycrystalline CDHA nanowires and nanotubes were characterized by Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). At the same time, this study enabled to understand the mechanism of nanopores filling in gold covered polycarbonate membrane: here a preferential nucleation on gold in membranes with 100 and 200 nm nanopores diameters forming nanowires whereas a preferential and randomly nucleation on nanopores walls in membranes with 400 nm nanopores diameter forming nanotubes.

International audience; Articular cartilage is a connective tissue which does not spontaneously heal. To address this issue, biomaterial-assisted cell therapy has been researched with promising advances. The lack of strong mechanical properties is still a concern despite significant progress in three-dimensional scaffolds. This article's objective was to develop a composite hydrogel using a small amount of nano-reinforcement clay known as laponites. These laponites were capable of self-setting within the gel structure of the silated hydroxypropylmethyl cellulose (Si-HPMC) hydrogel. Laponites (XLG) were mixed with Si-HPMC to prepare composite hydrogels leading to the development of a hybrid interpenetrating network. This interpenetrating network increases the mechanical properties of the hydrogel. The in vitro investigations showed no side effects from the XLG regarding cytocompatibility or oxygen diffusion within the composite after cross-linking. The ability of the hybrid scaffold containing the composite hydrogel and chondrogenic cells to form a cartilaginous tissue in vivo was investigated during a 6-week implantation in subcutaneous pockets of nude mice. Histological analysis of the composite constructs revealed the formation of a cartilage-like tissue with an extracellular matrix containing glycosaminoglycans and collagens. Overall, this new hybrid construct demonstrates an interpenetrating network which enhances the hydrogel mechanical properties without interfering with its cytocompatibility, oxygen diffusion, or the ability of chondrogenic cells to self-organize in the cluster and produce extracellular matrix components. This composite hydrogel may be of relevance for the treatment of cartilage defects in a large animal model of articular cartilage defects.Statement of significance: Articular cartilage is a tissue that fails to heal spontaneously. To address this clinically relevant issue, biomaterial-assisted cell therapy is considered promising but often lacks adequate mechanical properties. Our objective was to develop a composite hydrogel using a small amount of nano reinforcement (laponite) capable of gelling within polysaccharide based self-crosslinking hydrogel. This new hybrid construct demonstrates an interpenetrating network (IPN) which enhances the hydrogel mechanical properties without interfering with its cytocompatibility, O2 diffusion and the ability of chondrogenic cells to self-organize in cluster and produce extracellular matrix components. This composite hydrogel may be of relevance for the treatment of cartilage defects and will now be considered in a large animal model of articular cartilage defects.

Solid-state transformation of CDA at high temperature has been investigated using TEM microscopy and diffraction from sintered biphasic calcium phosphate (hydroxyapatite-HA, and beta-tricalcium phosphate-TCP). Microcrystals, between 200nm and 800nm approximately, separated by grain boundaries were found to be either HA-HA or TCP-TCP, but not HA-TCP, suggesting that heteroepitaxial growth is very unlikely between these two orthophosphates. TEM-correlated EDX elemental analysis also demonstrated a higher ionic substitution (Na, Mg) of TCP phase.

Introduction Poly-ether-ether-ketone (PEEK) is a radiolucent substitute for titanium commonly used in spinal surgery. Its applications to oral surgery are promising but the osseointegration of PEEK-derived dental implants and the potential complications of their placement are not well studied. Case report We report three cases of patients presenting with severe infectious complications after being implanted with intra-osseous PEEK-derived biocompatible materials. We underline the difficulties in managing those infections due to the limited knowledge on the properties of PEEK in implantology. Conclusion Although many PEEK-derived implants are currently being evaluated in vitro and in vivo , definitive clinical results on their safety are not available. We report 3 cases of PEEK-derived implant placement where poor osseointegration led to severe infections and implant loss. Further clinical trials are thus needed to evaluate the applicability of biocompatible PEEK-based material in implantology.

OBJECTIVE: Results of endovascular repair vary according to the arterial bed. We hypothesized that these differences may be related to the plaque features. To explore this hypothesis, we designed a prospective study that compared carotid and femoral atheroma. METHODS AND RESULTS: Patients that underwent femoral or carotid endarterectomy were included in our study. Demographic data and blood sampling were obtained prior to surgery. Plaques were evaluated for AHA grading, calcification and lipid content. Eighty-eight plaques were harvested during this study (45 carotid specimens and 43 femoral specimens). No differences were noted between carotid and femoral groups regarding demographic and biological data. Histological data more frequently showed fibrous cap atheroma in carotid arteries (75%) and fibrocalcific plaques in femoral arteries (93%), p

The reaction of aqueous Zoledronate solutions with β-tricalcium phosphate resulted in the precipitation of a crystalline Zoledronate complex on the surface of the calcium phosphate. This complex (C...

Precipitation of calcium phosphates occurs in dairy products and depending on pH and ionic environment, several salts with different crystallinity can form. The present study aimed to investigate the effects of NaCl and citrate on the characteristics of precipitates obtained from model solutions of calcium phosphate at pH 6·70 maintained constant or left to drift. The ion speciation calculations showed that all the starting solutions were supersaturated with respect to dicalcium phosphate dihydrate (DCPD), octacalcium phosphate (OCP) and hydroxyapatite (HAP) in the order HAP>OCP>DCPD. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analyses of the precipitates showed that DCPD was formed at drifting pH (acidic final pH) whereas poor crystallised calcium deficient apatite was mainly formed at constant pH (6·70). Laser light scattering measurements and electron microscopy observations showed that citrate had a pronounced inhibitory effect on the crystallisation of calcium phosphates both at drifting and constant pH. This resulted in the decrease of the particle sizes and the modification of the morphology and the microstructure of the precipitates. The inhibitory effect of citrate mainly acted by the adsorption of the citrate molecules onto the surfaces of newly formed nuclei of calcium phosphate, thereby changing the morphology of the growing particles. These findings are relevant for the understanding of calcium phosphate precipitation from dairy byproducts that contain large amounts of NaCl and citrate.

An injectable composite silanized hydroxypropyl methyl cellulose/biphasic calcium phosphate (Si-HPMC/BCP) has been investigated in humans with promising results. The aim of this study was to evaluate his efficacy for treating periodontal defects (canine fenestration and premolar furcation) in dog models. At 3 months, we observed that bone formation around BCP particles in furcation model is more discernible but not statistically significant in defects filled with Si-HPMC/BCP compared to healing in control. We suggest that BCP particles sustain the bone healing process by osteoconduction, while the Si-HPMC hydrogel enhances intergranular cohesion and acts as an exclusion barrier. Furthermore, bone ingrowth is not so distinctive in superficial defects where the biomaterial appears unstable. These results with Si-HPMC/BCP are encouraging. In addition, this biomaterial is easy to use and simplifies the process of filling periodontal lesions. However, more researches are needed to improve the viscosity and hardness to adjust the material to the specificities of periodontal defects.

International audience; Combination of a bisphosphonate (BP) anti-osteoporotic drug, alendronate, with an apatitic calcium phosphate cement does not significantly affect the main properties of the biomaterial, in terms of injectability and setting time, provided that the BP is introduced chemisorbed onto calcium-deficient apatite, one of the components of the cement. In contrast to other modes of introducing the BP into the cement formulation, this mode allows to minimize alendronate release in the cement paste, thus limiting the setting retardant effect of the BP. An original approach based on high frequency impedance measurements is found to be a convenient method for in situ monitoring of the cement setting reaction. The release profile of the drug from a cement block under continuous flow conditions can be well described using a coupled chemistry/transport model, under simulated in vivo conditions. The results show that the released alendronate concentration is expected to be much lower than the cytotoxic concentration.

Sodium-dependent phosphate cotransporters are key regulators of phosphate homeostasis and play a major role in mineralized tissues remodelling. However, factors influencing their expression remain under consideration. In our study, modulation of type III sodium-dependent phosphate cotransporters expression by inorganic phosphate (Pi) was investigated in the murine odontoblast-like cell line MO6-G3. Experiments were designed to determine the effects of phosphate release on dental cells during tooth decay. By real-time RT-PCR we demonstrated that Glvr-1 and -2 expressions are up-regulated by Pi. The increase in Glvr-1 and -2 expressions was correlated with ERK1/2 phosphorylation and calcium/phosphate crystals formation in cultured wells. Using calcium-free culture conditions or the specific inhibitor of ERK phosphorylation (UO126), we demonstrated that Pi effects on Glvr-1 and -2 up-regulation require the presence of calcium and involve ERK signalling pathways. This study contributes to give new insights in the control of Pi transport during carious diseases.

International audience; In this work, calcium-deficient apatites (CDA) were synthesized by ammonia hydrolysis reaction of dicalcium phosphate dihydrate (DCPD; CaHPO4 x 2 H2O) to obtain biphasic calcium phosphates (BCP) without any extraionic substitution. The influence of three parameters was studied: temperature of the reaction (70 and 100 degrees C), time of the reaction (4 and 18 h), and the pressure (open and closed system). Experiments were made according to a factorial design method (FDM) allowing optimization of the number of samples as well as statistical analysis of results. Moreover, the influence of temperature (until 200 degrees C) was investigated. The crystal size of CDA was determined according to the Scherrer's formula and from Rietveld refinements taking the CDA anisotropy into account. The last method seems to be a reliable method to determine crystallite sizes of CDA, since crystallite sizes of CDA along and directions were accessible. The results describe the hydroxyapatite % (HA%) in BCP by a first-order polynomial equation in the experimental area studied and the HA content was found to increase by raising time and temperature of the reaction. Moreover, the type of reaction system (open/closed vessel) appeared to have little influence on HA%.

International audience; A new injectable and self-crosslinkable bone substitute (IBS2) was developed for filling bone defects. The IBS2 consisted of a chemically modified polymer solution mixed with biphasic calcium phosphate (BCP) ceramic particles. The polymer hydroxypropylmethyl cellulose was functionalized with silanol groups (Si-HPMC) and formed a viscous solution (3 wt %) in alkaline medium. With a decrease in pH, self-hardening occurred due to the formation of intermolecular -Si-O- bonds. During setting, BCP particles, 40 to 80 microm in diameter, were added to the polymer solution at a weight ratio of 50/50. The resulting injectable material was bilaterally implanted into critically sized bone defects at the distal femoral epiphyses of nine New Zealand White rabbits. The IBS2 filled the bone defects entirely and remained in place. After 8 weeks, bone had grown centripetally and progressed towards the center of the defects. Newly formed bone, ceramic, and nonmineralized tissue ratios were 24.6% +/- 5.6%, 21.6% +/- 5.8%, and 53.7% +/- 0.1%, respectively. Mineralized and mature bone was observed between and in contact with the BCP particles. The bone/ceramic apposition was 73.4% +/- 10.6%. The yield strength for the IBS2-filled defects was 16.4 +/- 7.2 MPa, significantly higher than for the host trabecular bone tissue (2.7 +/- 0.4 MPa). This study showed that BCP particles supported the bone healing process by osteoconduction while the Si-HPMC hydrogel created intergranular space for bone ingrowth. This new injectable and self-crosslinkable bone substitute could be used conveniently in orthopedic surgery for filling critical-size bone defects.

For the preparation of beta-TCP and biphasic calcium phosphates (BCPs, mixtures of hydroxyapatite and beta-TCP), the presence of sodium in the reaction medium results in the incorporation of sodium in the beta-TCP network, by substitution of some calcium sites. Accordingly, a decrease of the unit cell volume of -TCP was observed with increasing sodium substitution. The distribution of sodium in the beta-TCP structure, as a function of the amount incorporated, was probed using 31P and 23Na MAS NMR and 31P{23Na} REDOR experiments. It was shown that an estimation of the sodium content in beta-TCPs could be obtained from the modeling of their 31P MAS NMR spectra. Moreover, the incorporation of sodium in beta-TCPs results in improved mechanical properties, without affecting the biocompatibility of the ceramics.

International audience; Calcium phosphate ceramics are currently used as bone graft substitutes in various types of clinical applications. Fibrin glue is also used in surgery due to its haemostatic, chemotactic and mitogenic properties. By combining these two biomaterials, new composite scaffolds were prepared. In this study, we attempt to analyse whether thrombin concentration in the fibrin glue could influence the properties of the composite. The association between fibrin glue and calcium phosphate ceramic granules was characterized at the ultra structural level. Micro and macroporous biphasic calcium phosphate ceramic granules with a diameter of 1-2mm composed of hydroxyapatite and beta-tricalcium phosphate (60/40) were associated to fibrin glue. The composites were observed by scanning and transmission electron microscopy and microcomputed tomography. Fibre thickness, porosity and homogeneity of the fibrin clot were modified by increased the thrombin concentration. Mixing fibrin glue with calcium phosphate granules (1:2) did not modify the microstructure of the fibrin clot in the composite. Nevertheless, thrombin interacted with the bioceramic by inducing the nucleation of crystalline precipitate at the ceramic/fibrin glue interface. Combining fibrin sealant and calcium phosphate ceramics could lead to new scaffolds for bone tissue engineering with the synergy of the properties of the two biomaterials.

International audience; Involvement of Pi and Ca in chondrocyte maturation was studied because their levels increase in cartilage growth plate. In vitro results showed that Pi increases type X collagen expression, and together with Ca, induces apoptosis-associated mineralization, which is similar to that analyzed in vivo, thus suggesting a role for both ions and apoptosis during endochondral ossification. INTRODUCTION: During endochondral ossification, regulation of chondrocyte maturation governs the growth of the cartilage plate. The role of inorganic phosphate (Pi), whose levels strongly increase in the hypertrophic zone of the growth plate both in intra- and extracellular compartments, on chondrocyte maturation and mineralization of the extracellular matrix has not yet been deciphered. MATERIALS AND METHODS: The murine chondrogenic cell line ATDC5 was used. Various Pi and calcium concentrations were obtained by adding NaH2PO4/Na2HPO4 and CaCl2, respectively. Mineralization was investigated by measuring calcium content in cell layer by atomic absorption spectroscopy and by analyzing crystals with transmission electron microscopy and Fourier transform infrared microspectroscopy. Cell differentiation was investigated at the mRNA level (reverse transcriptase-polymerase chain reaction [RT-PCR] analysis). Cell viability was assessed by methyl tetrazolium salt (MTS) assay and staining with cell tracker green (CTG) and ethidium homodimer-(EthD-1). Apoptosis was evidenced by DNA fragmentation and caspase activation observed in confocal microscopy, as well as Bcl-2/Bax mRNA ratio (RT-PCR analysis). RESULTS: We showed that Pi increases expression of the hypertrophic marker, type X collagen. When calcium concentration is slightly increased (like in cartilage growth plate), Pi also induces matrix mineralization that seems identical to that observed in murine growth plate cartilage and stimulates apoptosis of differentiated ATDC5 cells, with a decrease in Bcl-2/Bax mRNA ratio, DNA fragmentation, characteristic morphological features, and caspase-3 activation. In addition, the use of a competitive inhibitor of phosphate transport showed that these effects are likely dependent on Pi entry into cells through phosphate transporters. Finally, inhibition of apoptosis with ZVAD-fmk reduces pi-induced mineralization. CONCLUSIONS: These findings suggest that Pi regulates chondrocyte maturation and apoptosis-associated mineralization, highlighting a possible role for Pi in the control of skeletal development.