Search

The ceramics industry dedicated to the manufacture of building materials is a very significant cause of environmental pollution, and various research projects are being carried out to reduce the associated environmental impact. One of the most important research lines is the generation and development of new materials, from waste, through more sustainable production processes. All of this is framed in circular mining. In this research study, geopolymers were developed with biomass bottom ashes and brick dust in order to replace the traditional ceramics used to construct bricks. For this, different families of test tubes were formed with different percentages of both residues, and their physical and mechanical properties were studied. In this way, the properties of geopolymers could be compared with traditional ceramics. In addition, in order to determine the cause–effect relationships between physical properties and compressive strength, data were processed using fuzzy logic and data mining techniques. The results showed the feasibility of geopolymers generation with biomass bottom ashes and brick dust with acceptable properties to replace conventional ceramics. In addition, the fuzzy logic analysis allowed for establishing clear and objective relationships between the physical properties and the compressive strength of the geopolymers, with the aim of developing the highest quality geopolymer. [ABSTRACT FROM AUTHOR]

Mining activities are essential for a population's development; however, they also produce negative effects such as the production of waste, an impact on flora and water pollution. On the other hand, construction is one of the sectors which is most demanding of raw materials, with one of the main such materials being water. For this reason, this research evaluates the feasibility of incorporating water contaminated by mining waste into ceramic materials for bricks. In this way, the use of water is reduced and, on the other hand, the contaminating elements of the mining water are encapsulated in the ceramic matrix. To achieve this, the clay used and the contaminated water were first analysed, then different families of samples were conformed with different percentages of contaminated water. These samples were tested to determine their physical and mechanical properties. At the same time, leachate tests were carried out to determine that the ceramic material created did not cause environmental problems. The test results showed that the physical and mechanical properties of the ceramics were not influenced by the addition of contaminated water. On the other hand, the leachate tests showed that encapsulation of most of the potentially toxic elements occurred. However, the use of contaminated water as mixing water for ceramics could only be performed up to 60%, as higher percentages would leach impermissible arsenic concentrations. Accordingly, a new way of reusing water contaminated by mining activities is developed in this study, taking advantage of resources, avoiding environmental pollution and creating economic and environmentally friendly end products. [ABSTRACT FROM AUTHOR]

The construction sector is one of the most demanding sectors of raw materials in existence today. As a consequence, the extraction of these materials has a significant impact on the environment. At the same time, mining activities produce a series of wastes, in some cases with polluting elements, which must be treated to avoid pollution. Therefore, the use of mining waste for the conformation of new construction materials is an important environmental advantage, even more so when such waste is prevented from producing polluting leachates. Therefore, in this research, geopolymers are developed with mine tailings from the Linares lead mines, chemically activated with potassium hydroxide. For this purpose, different percentages of the alkaline activator were tested and the physical and mechanical properties of the conformed materials were evaluated. The analysis of the different conformed geopolymers determined the optimum percentage of potassium hydroxide for conforming the geopolymer with the best mechanical and physical properties. In addition, the concentration in the leachate of potentially contaminating chemical elements in the mining waste was estimated to be lower than those regulated by the regulations. Consequently, this research shows the development of a sustainable material for construction with mining waste and reduction of the environmental impact of traditional products. [ABSTRACT FROM AUTHOR]

Road construction is an activity that demands a significant amount of aggregates for bituminous mixtures. In addition, these aggregates must be of a suitable quality for use, even more so on high traffic roads. In response to this problem, and in order to avoid the extraction of new raw materials, research is being carried out using industrial waste as a substitute for conventional aggregates. In this way, the extraction of raw materials is reduced and landfilling of waste is avoided. However, these wastes must have certain properties and environmental advantages over natural aggregates. Otherwise, the use of waste would not be environmentally beneficial but would be more damaging to the environment. For this reason, this research evaluates the viability of using electric arc furnace slag as aggregates for bituminous mixtures, the main objectives being the determination of the characteristics of the by-product, the particularities and the critical points to be taken into account for its subsequent use in mixtures. At the same time, the environmental advantages of treating this waste to obtain a usable aggregate are evaluated in comparison with the processing of a natural aggregate. The results showed that electric arc furnace slags have a suitable chemical composition and excellent physical and mechanical properties for use in bituminous mixtures, even on high traffic roads. At the same time, it was determined that their use produces a considerable reduction in environmental afflictions. Therefore, it could be affirmed that the use of electric arc furnace slags in bituminous mixtures is recommendable as a way to develop more sustainable materials for construction. [ABSTRACT FROM AUTHOR]

The greater environmental awareness, new environmental regulations and the optimization of resources make possible the development of sustainable materials as substitutes for the traditional materials used in construction. In this work, geopolymers were developed as substitutes to traditional ceramics for brick manufacture, using as raw materials: chamotte, as a source of aluminosilicate, and biomass bottom ashes from the combustion of almond shell and alpeorujo (by-product produced in the extraction of olive oil composed of solid parts of the olive and vegetable fats), as the alkaline activator. For the feasibility study, samples were made of all possible combinations of both residues from 100% chamotte to 100% biomass bottom ash. The tests carried out on these sample families were the usual physical tests for ceramic materials, notably the compression strength test, as well as colorimetric tests. The freezing test was also carried out to study the in-service behavior of the different sample groups. The families with acceptable results were subjected to Fourier transform infrared (FTIR) analysis. The results of the previous tests showed that the geopolymer was indeed created for the final families and that acceptable mechanical and aging properties were obtained according to European standards. Therefore, the possibility of creating geopolymers with chamotte and biomass bottom ashes as substitutes for conventional ceramics was confirmed, developing an economical, sustainable material, without major changes in equipment and of similar quality to those traditionally used for bricks. [ABSTRACT FROM AUTHOR]

Cold in-place recycling with bitumen emulsion is a good environmental option for road conservation. The technique produces lower CO2 emissions because the product is manufactured and spread in the same location as the previous infrastructure, and its mixing with bitumen emulsion occurs at room temperature. Adding materials with cementitious characteristics gives the final mixture greater resistance and durability, and incorporating an industrial by-product such as ladle furnace slag (of which cementitious characteristics have been corroborated by various authors) enables the creation of sustainable, resistant pavement. This paper describes the incorporation of ladle furnace slag in reclaimed asphalt pavements (RAP) to execute in-place asphalt pavement recycling with bitumen emulsion. Various test groups of samples with increasing percentages of emulsion were created to study both the density of the mixtures obtained, and their dry and post-immersion compressive strength. To determine these characteristics, the physical and chemical properties of the ladle furnace slag and the reclaimed asphalt pavements were analyzed, as well as compatibility with the bitumen emulsion. The aforementioned tests define an optimal combination of RAP (90%), ladle furnace slag (10%), water (2.6%), and emulsion (3.3%), which demonstrated maximum values for compressive strength of the dry and post-immersion bituminous mixture. These tests therefore demonstrate the suitability of ladle furnace slag for cold in-place recycling with bitumen emulsion. [ABSTRACT FROM AUTHOR]

Pavement maintenance is an essential activity for maintaining the quality of the pavements. It is common for the ageing pavement to present problems of friction, so a proper solution must be provided. In this work, electric arc furnace slags are incorporated in slurry surfacing to provide adequate friction with this technique. The electric arc furnace slag was studied with physical, chemical, and mechanical tests to evaluate its suitability in the formation of the bituminous mixture. At the same time, different groups of samples were made with increasing percentages of bitumen emulsion and slag as coarse aggregate, determining the wear of the different families and the cohesion. The results reflected the excellent characteristics of the electric arc furnace slags, and an optimal combination of materials (slag, aggregate, water, and bitumen emulsion) could be obtained to develop slurry surfacing applicable to important traffic roads. This provided a use for the electric arc furnace slag in which its mechanical properties were used and a sustainable bituminous mixture with excellent characteristics and respectful of the environment was developed. [ABSTRACT FROM AUTHOR]

The construction of road infrastructure is one of the most polluting activities that exists today. Therefore, the use of waste from other industries is an excellent solution, since it reduces the consumption of raw materials, reduces CO2 emissions and avoids the disposal of waste in a landfill. In this study, electric arc furnace slag, cellulose fibers from the papermaking industry and bitumen emulsion were used for the conformation of sustainable and porous bituminous mixtures. Electric arc furnace slag was used as a high-resistance aggregate with a capacity sufficient to support traffic loads. Cellulose fibers were added to increase the percentage of binder in the mixture without bleeding problems, thereby achieving greater tensile strength. To do this, first the waste was physically and chemically characterized, then different mixtures were conformed and finally the mixtures were studied by means of the loss by wear and Marshall tests. The results reflected an optimal combination of materials that provided the best results in the mechanical tests, obtaining much better results than the mixtures with discontinuous grading and traditional bitumen emulsion. Therefore, a sustainable, porous and economical mixture for road use is obtained in this research. [ABSTRACT FROM AUTHOR]

Mining activity produces a series of wastes that must be treated to avoid environmental pollution. In addition, some of these mining wastes still contain metallic elements that are interesting for their extraction with new less expensive techniques and that can work with low mineral grades, such as hydrometallurgy. This study evaluates the suitability of Copper recovery in mining wastes, coming from waste dump, with a high percentage of metal oxides and granite. This recovery is carried out through leaching in 0.05, 0.10, 0.15 and 0.20 molar Sulphuric Acid solutions, at ambient temperature and atmospheric pressure. The exposure of the waste to the solution was made for 96 h, taking measurements of the leaching and evaluating the increase in Copper concentration every 24 h. The results reflected a good Copper recovery rate with concentrations up to 1.9 g/L. The best results were obtained for the 0.20 molar Sulphuric Acid solutions, producing a stability in the Copper concentration after 72 h. Other elements in smaller proportion as the Zinc were also recovered. Therefore, a process of recovery of Copper was obtained with a robust, versatile and economic technique in mining residues that currently represent an environmental pollution. [ABSTRACT FROM AUTHOR]

The manufacture of bricks for building purposes consumes large quantities of virgin materials, such as clay. On the other hand, the ornamental stone processing industry produces a huge amount of stone cutting sludge in its process. Therefore, this study presents the development of ceramic materials for the manufacture of bricks with stone cutting sludges, more specifically from granite. For this purpose, the physical properties of the stone cutting sludge and the chemical composition were mainly analyzed. Subsequently, different groups of ceramic samples were conformed and sintered with various combinations of clay and of stone cutting sludges. The conformed samples were evaluated with different physical tests and with the compressive strength test. The addition of stone cutting sludges to the ceramics reflected the creation of a material with lower density and higher porosity. The compressive strength of the different groups reflected a maximum allowable percentage of stone cutting sludges incorporation of 70%. Therefore, ceramic materials were developed with stone cutting sludges, developing a sustainable, lighter material with acceptable mechanical and physical characteristics. Avoiding the deposition of a polluting waste in a landfill and at the same time avoiding the extraction of new virgin materials. [ABSTRACT FROM AUTHOR]

Additive manufacturing, framed within the Industry 4.0. concept, is one of the processes that has witnessed greater development in the last years. Within this subject fused deposition modelling (FDM) printing technology is mainly dedicated to polymers and capable of providing components or elements of sufficient quality for different sectors. However, due to the process there can be a series of surface irregularities, which although they do not affect the required dimensional tolerances, they can cause problems in the useful life of the printed object in its interactions with the environment, as well as poor aesthetic qualities. Based on the above, this paper presents a series of chemical surface treatments capable of providing a surface that avoids undesired printing lines. For this purpose, fast, economical and environmentally sustainable treatments are used that obviously do not deteriorate the structure of the component or degrade the material surface. A complete study is therefore presented in which the different variables of the process are evaluated, as well as those of the printing technology, such as the layer height, coating, infill density, etc. The development of this project achieves a field of application of the detailed chemical treatment to obtain smooth surfaces, without degradation of the final part and with the appropriate dimensional tolerances. [ABSTRACT FROM AUTHOR]

Mining activity is essential for the social welfare of the population. However, this activity produces a series of mining waste. These mining wastes, if not properly treated, can produce significant environmental pollution. This study develops the incorporation of tailings from washing plants in ceramic materials for bricks in order to retain the contaminating elements in the ceramic matrix. To this end, firstly, a physical and chemical characterisation of the mining waste is carried out and different groups of samples are conformed with clay and mining waste. These conformed samples with mining waste are evaluated through different physical and mechanical tests typical in the ceramic industry, studying the variation of properties by the incorporation of the waste. In turn, the leachates from the groups of conformed samples are analyzed, confirming the retention of the contaminating elements of the mining waste in the ceramic matrix. The results of these tests showed that ceramics can be made for bricks with up to 90% mining waste, obtaining physical and mechanical properties acceptable regarding the regulations and retaining the contaminating elements in the ceramic matrix, as confirmed by the leachate tests. [ABSTRACT FROM AUTHOR]

Scarcity of raw materials, reduction of greenhouse gas emissions and reduction of waste disposal in landfills are leading to the development of more sustainable building materials. Based on these lines, this work studies the incorporation of biomass bottom ashes into ceramic materials for brick manufacture, in order to reuse this currently unused waste and reduce clay extraction operations. To this end, different groups of samples were made with different combinations of clay and biomass bottom ashes, from 100% clay to 100% biomass bottom ashes. These samples were shaped, sintered and subjected to the usual physical tests in ceramics. In turn, the mechanical resistance, color and leaching of the contaminating elements present were studied. The physical and mechanical tests showed that the results of all the families were adequate, achieving compressive strengths of over 20 MPa and leaching of the contaminating elements acceptable by the regulations. Therefore, a sustainable range of ceramics was developed, with specific properties (porosity, density, resistance and color), with a waste that is currently unused and sustainable with the environment. [ABSTRACT FROM AUTHOR]