Search

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a high performance tool for molecular depth profiling of polymer films, in particular when they are structured in microphases. However, a major issue is the degradation of polymer materials under ion irradiation in reactions such as cross-linking, chain breaking, or reorganization processes of polymers which have been demonstrated for materials such as polystyrene (PS) and poly(methyl methacrylate) (PMMA). This work aims at comparing ToF-SIMS molecular depth profiling of structured polymers (polystyrene (PS)-b-polymethyl methacrylate (PMMA) block copolymers (BCP)) using either ultralow energy cesium or the more recently introduced C60 ++ (under NO dosing and with sample cooling) and argon cluster ion beams (using Ar1500 + ions at 5 keV). The latter improved the quality of the depth profiles, especially the argon cluster ion beam, as it is characterized by a greater homogeneity for the sputter yields of PS and PMMA. No significant artifacts were observed, and this was confirmed by the comparison of depth profiles obtained from films with variable thickness, annealing time, and morphology (cylindrical blocks vs spherical blocks). Comparison to a theoretical model (hexagonal centered pattern) ensured that the ToF-SIMS depth profiles described the real morphology and may thus be a relevant characterization tool to verify the morphology of the films as a function of the deposition parameters. [ABSTRACT FROM AUTHOR]

Directed self-assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in-depth distributions of the blocks should be well characterized; for the latter, time-of-flight (ToF) SIMS is a particularly well-adapted technique. Here, we use an ION-TOF ToF-SIMS V in negative mode to provide qualitative information on the in-depth organization of polystyrene- b-polymethylmethacrylate (PS- b-PMMA) BCP thin films. Using low-energy Cs+ sputtering and Bi3+ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS- b-PMMA BCPs are then characterized showing that self-assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF-SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF-SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Efficient lithium recovery from geothermal brines is crucial for the battery industry. Current electrochemical separation methods struggle with the simultaneous presence of Na + , K + , Mg 2+ , and Ca 2+ because these cations are similar to Li + , making it challenging to separate effectively. We address these challenges with a three-chamber reactor featuring a polymer porous solid electrolyte in the middle layer. This design improves the transference number of Li + (t Li + ) by 2.1 times compared to the two-chamber reactor and also reduces the chlorine evolution reaction, a common side reaction in electrochemical lithium extraction, to only 6.4% in Faradaic Efficiency. Employing a lithium-ion conductive glass ceramic (LICGC) membrane, the reactor achieved high t Li + of 97.5% in LiOH production from simulated brine, while the concentrations of Na + K + , Mg 2+ , and Ca 2+ are below the detection limit. Electrochemical experiments and surface analysis elucidated the cation transport mechanism, highlighting the impact of Na + on Li + migration at the LICGC interface., Competing Interests: Competing interests statement:Y.F., Z.F., H.W., and S.L.B. are inventors on a provisional United States patent application titled “Electrochemical Manufacturing of Lithium Hydroxide from Geothermal Brines in a Three-chamber Solid Electrolyte Reactor using a LICGC membrane” for the technology related to this work.

Cotton ovule in vitro cultures are a promising platform for exploring biofabrication of fibers with tailored properties. When the ovules' growth medium is supplemented with chemically synthesized cellulose precursors, it results in their integration into the developing fibers, thereby tailoring their end properties. Here, we report the feeding of synthetic glucosyl phosphate derivative, 6-deoxy-6-fluoro-glucose-1-phosphate (6F-Glc-1P) to cotton ovules growing in vitro , demonstrating the metabolic incorporation of 6F-Glc into the fibers with enhanced mechanical properties and moisture-retention capacity while emphasizing the role of molecular hierarchical architecture in defining functional characteristics and mechanical properties. This incorporation strategy bypasses the early steps of conventional metabolic pathways while broadening the range of functionalities that can be employed to customize fiber end properties. Our approach combines materials science, chemistry, and plant sciences to illustrate the innovation required to find alternative solutions for sustainable production of functional cotton fibers with enhanced and emergent properties., Competing Interests: The authors declare no competing interests., (© 2024 The Author(s).)

Spin in semiconductors facilitates magnetically controlled optoelectronic and spintronic devices. In metal halide perovskites (MHPs), doping magnetic ions is proven to be a simple and efficient approach to introducing a spin magnetic momentum. In this work, we present a facile metal ion doping protocol through the vapor-phase metal halide insertion reaction to the chemical vapor deposition (CVD)-grown ultrathin Cs 3 BiBr 6 perovskites. The Fe-doped bismuth halide (Fe:CBBr) perovskites demonstrate that the iron spins are successfully incorporated into the lattice, as revealed by the spin-phonon coupling below the critical temperature T c around 50 K observed through temperature-dependent Raman spectroscopy. Furthermore, the phonons exhibit significant softening under an applied magnetic field, possibly originating from magnetostriction and spin exchange interaction. The spin-phonon coupling in Fe:CBBr potentially provides an efficient way to tune the spin and lattice parameters for halide perovskite-based spintronics.

Evaluating the heterogeneity of extracellular vesicles (EVs) is crucial for unraveling their complex actions and biodistribution. Here, we identify consistent architectural heterogeneity of EVs using cryogenic transmission electron microscopy (cryo-TEM), which has an inherent ability to image biological samples without harsh labeling methods while preserving their native conformation. Imaging EVs isolated using different methodologies from distinct sources, such as cancer cells, normal cells, immortalized cells, and body fluids, we identify a structural atlas of their dominantly consistent shapes. We identify EV architectural attributes by utilizing a segmentation neural network model. In total, 7,576 individual EVs were imaged and quantified by our computational pipeline. Across all 7,576 independent EVs, the average eccentricity was 0.5366 ± 0.2, and the average equivalent diameter was 132.43 ± 67 nm. The architectural heterogeneity was consistent across all sources of EVs, independent of purification techniques, and compromised of single spherical, rod-like or tubular, and double shapes. This study will serve as a reference foundation for high-resolution images of EVs and offer insights into their potential biological impact.

Bismuth halide perovskites are widely regarded as nontoxic alternatives to lead halide perovskites for optoelectronics and solar energy harvesting applications. With a tailorable composition and intriguing optical properties, bismuth halide perovskites are also promising candidates for tunable photonic devices. However, robust control of the anion composition in bismuth halide perovskites remains elusive. Here, we established chemical vapor deposition and anion exchange protocols to synthesize bismuth halide perovskite nanoflakes with controlled dimensions and variable compositions. In particular, we demonstrated the gradient bromide distribution by controlling the anion exchange and diffusion processes, which is spatially resolved by time-of-flight secondary ion mass spectrometry. Moreover, the optical waveguiding properties of bismuth halide perovskites can be modulated by flake thicknesses and anion compositions. With a unique gradient anion distribution and controllable optical properties, bismuth halide perovskites provide new possibilities for applications in optoelectronic devices and integrated photonics.

Reversible proton-conducting solid oxide cells (R-PSOCs) have the potential to be the most efficient and cost-effective electrochemical device for energy storage and conversion. A breakthrough in air electrode material development is vital to minimizing the energy loss and degradation of R-PSOCs. Here we report a class of triple-conducting air electrode materials by judiciously doping transition- and rare-earth metal ions into a proton-conducting electrolyte material, which demonstrate outstanding activity and durability for R-PSOC applications. The optimized composition Ba 0.9 Pr 0.1 Hf 0.1 Y 0.1 Co 0.8 O 3-δ (BPHYC) consists of three phases, which have a synergistic effect on enhancing the performance, as revealed from electrochemical analysis and theoretical calculations. When applied to R-PSOCs operated at 600 °C, a peak power density of 1.37 W cm -2 is demonstrated in the fuel cell mode, and a current density of 2.40 A cm -2 is achieved at a cell voltage of 1.3 V in the water electrolysis mode under stable operation for hundreds of hours., Competing Interests: The authors declare the following competing financial interest(s): A U.S. Patent with a number of 17/476,032 has been filed., (© 2023 The Authors. Published by American Chemical Society.)

Diamond surface functionalization has received significant research interest recently. Specifically, H-termination has been widely adopted because it endows the diamond surface with negative electron affinity and the hole carrier is injected in the presence of surface transfer dopants. Exploring different functional groups' attachment on diamond surfaces and their impact on the electronic structure, using wet and dry chemical approaches, would hence be of interest in engineering diamond as a semiconductor. Here, we report the functionalization of the H-terminated diamond surface with nitrogen and sulfur heteroatoms. Surface characterization of functionalized diamond surfaces shows that these groups are well-distributed and covalently bonded to diamonds. Four chemical functional groups (-SH, -S-S-, -S-O, and -S=O) were found on the sulfurized diamond surface, and two groups (-NH 2 and =NH) upon amination. We also report co-functionalization of surface with N and S (N-S), where sulfurization promotes sequential amination efficiency with reduced exposure time. Electrical measurement shows that heteroatom-modified diamond surfaces possess higher conductivity than H-terminated diamonds. Density functional theory (DFT) shows that upon functionalization with various N/S ratios, the conduction band minimum and valence band maximum downshift, which lowers the bandgap in comparison to an H-terminated diamond. These observations suggest the possibility of heteroatom functionalizations with enhanced surface electrical conductivity on the diamond that are useful for various electronic applications.

Screening implantable biomaterials for antifibrotic properties is constrained by the need for in vivo testing. Here we show that the throughput of in vivo screening can be increased by cellularly barcoding a chemically modified combinatorial library of hydrogel formulations. The method involves the implantation of a mixture of alginate formulations, each barcoded with human umbilical vein endothelial cells from different donors, and the association of the identity and performance of each formulation by genotyping single nucleotide polymorphisms of the cells via next-generation sequencing. We used the method to screen 20 alginate formulations in a single mouse and 100 alginate formulations in a single non-human primate, and identified three lead hydrogel formulations with antifibrotic properties. Encapsulating human islets with one of the formulations led to long-term glycaemic control in a mouse model of diabetes, and coating medical-grade catheters with the other two formulations prevented fibrotic overgrowth. High-throughput screening of barcoded biomaterials in vivo may help identify formulations that enhance the long-term performance of medical devices and of biomaterial-encapsulated therapeutic cells., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

The most effective antifouling coatings are designed to slowly release biocides that target a broad spectrum of marine organisms. However, as biocides have a deleterious effect on marine life, there is demand for environmentally friendly coatings that resist fouling through physical interactions. We propose a simple platform for the development of such coatings based on bottlebrush-modified elastomers. The bottlebrush additives were synthesized to have side chain chemistries that are known to be fouling-resistant, and these were incorporated in a commercial elastomer through blending and/or covalent attachment. The fouling performance of these coatings was highly variable, with area coverages of hard and soft foulants ranging from 1.4% to 7.2% and 29.1% to 64.0%, respectively, across a set of eight materials. The origin of these differences was explained by examining the structure of the coating surface through chemical imaging by time-of-flight secondary ion mass spectrometry (TOF-SIMS) and topographic imaging by atomic force microscopy (AFM). We found that fouling by certain soft and hard fouling organisms was primarily influenced by surface composition, which was controlled by both the chemistry and loading level of the bottlebrush additive, and was independent of the inherent surface roughness. While no type of coating could resist all soft and hard foulants, a formulation based on a bottlebrush copolymer additive with both siloxane and fluorinated monomers was effective against nearly all organisms encountered in the study.

We developed "reactive" bottlebrush polymers based on styrene (S) and t -butyl acrylate (tBA) as additives for polystyrene (PS) coatings. The bottlebrush polymers spontaneously bloom to both the air and substrate interfaces during solution casting. While neat PS films are hydrophobic and poorly adhere to the native oxide on clean silicon wafers, the hydrophilicity and substrate adherence of bottlebrush-incorporating PS films can be tailored through the thermally activated deprotection of tBA to produce acrylic acid (AA) and acrylic anhydride (AH). A critical design parameter is the manner by which tBA is incorporated into the bottlebrush: When the bottlebrush side chains are copolymers of S and tBA, the extent of deprotection is extremely low, even after prolonged thermal annealing at elevated temperature. However, when the bottlebrush contains a mixture of poly( t -butyl acrylate) (PtBA) and PS side chains, nearly all tBA is converted to AA and AH. Consequently, using the "mixed-chain" bottlebrush design with thermal processing and appropriate conditioning, the water contact angle is reduced from over 90° on unmodified PS down to 75° on bottlebrush-incorporating PS films, and the substrate adherence is improved in proportion to the extent of tBA deprotection.

Fibrosis remains a significant cause of failure in implanted biomedical devices and early absorption of proteins on implant surfaces has been shown to be a key instigating factor. However, lipids can also regulate immune activity and their presence may also contribute to biomaterial-induced foreign body responses (FBR) and fibrosis. Here it is demonstrated that the surface presentation of lipids on implant affects FBR by influencing reactions of immune cells to materials as well as their resultant inflammatory/suppressive polarization. Time-of-flight secondary ion mass spectroscopy (ToF-SIMS) is employed to characterize lipid deposition on implants that are surface-modified chemically with immunomodulatory small molecules. Multiple immunosuppressive phospholipids (phosphatidylcholine, phosphatidylinositol, phosphatidylethanolamine, and sphingomyelin) are all found to deposit preferentially on implants with anti-FBR surface modifications in mice. Significantly, a set of 11 fatty acids is enriched on unmodified implanted devices that failed in both mice and humans, highlighting relevance across species. Phospholipid deposition is also found to upregulate the transcription of anti-inflammatory genes in murine macrophages, while fatty acid deposition stimulated the expression of pro-inflammatory genes. These results provide further insights into how to improve the design of biomaterials and medical devices to mitigate biomaterial material-induced FBR and fibrosis., (© 2023 Wiley-VCH GmbH.)

Electroluminescence efficiencies and stabilities of quasi-two-dimensional halide perovskites are restricted by the formation of multiple-quantum-well structures with broad and uncontrollable phase distributions. Here, we report a ligand design strategy to substantially suppress diffusion-limited phase disproportionation, thereby enabling better phase control. We demonstrate that extending the π-conjugation length and increasing the cross-sectional area of the ligand enables perovskite thin films with dramatically suppressed ion transport, narrowed phase distributions, reduced defect densities, and enhanced radiative recombination efficiencies. Consequently, we achieved efficient and stable deep-red light-emitting diodes with a peak external quantum efficiency of 26.3% (average 22.9% among 70 devices and cross-checked) and a half-life of ~220 and 2.8 h under a constant current density of 0.1 and 12 mA/cm 2 , respectively. Our devices also exhibit wide wavelength tunability and improved spectral and phase stability compared with existing perovskite light-emitting diodes. These discoveries provide critical insights into the molecular design and crystallization kinetics of low-dimensional perovskite semiconductors for light-emitting devices., (© 2023. The Author(s).)

Objectives: To evaluate intermediate treatments between sodium hypochlorite and chlorhexidine gluconate irrigations for the prevention of a toxic brown precipitate in root canal therapy., Materials and Methods: Thirty-nine premolars were irrigated with 6% sodium hypochlorite and divided into either: No intermediate treatment; Dry paper points; three different irrigations with 17% ethylenediaminetetraacetic acid, deionized water, or 5% sodium thiosulfate. 2% chlorhexidine gluconate was the final irrigant in all groups. Sectioned teeth were analyzed for brown precipitate intensity and area using stereomicroscopy and components related to para-chloroaniline using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS)., Results: Stereomicroscopy showed that 5% STS significantly reduced brown precipitate intensity and area as compared with no intermediate irrigation (p < .05, Chi-square, generalized linear model, and Tukey's multiple comparison tests). Utilizing ToF-SIMS, 5% sodium thiosulfate was most effective in reducing the components representing para-chloroaniline and chlorhexidine gluconate., Conclusion: The 5% sodium thiosulfate was most effective among other intermediate treatments, assessed by stereomicroscopy and ToF-SIMS., (© 2022 The Authors. Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)

We report a method to prepare core-shell zeolite beta (*BEA) with an aluminous core and an epitaxial Si-rich shell. This method capitalizes on the inherent defects in *BEA crystals to simultaneously passivate acid sites on external surfaces and increase intracrystalline mesoporosity through facile post-hydrothermal synthesis modification in alkaline media. This process creates more hydrophobic materials by reducing silanol defects and enriching the shell in silica via a combination of dealumination and the relocation of silica from the core to the shell during intracrystalline mesopore formation. The catalytic consequences of *BEA core-shells relative to conventional analogues were tested using the biomass conversion of levulinic acid and n-butanol to n-butyl levulinate as a benchmark reaction. Our findings reveal that siliceous shells and intracrystalline mesopores synergistically enhance the performance of *BEA catalysts., (© 2022 Wiley-VCH GmbH.)

Realizing solution-processed heterostructures is a long-enduring challenge in halide perovskites because of solvent incompatibilities that disrupt the underlying layer. By leveraging the solvent dielectric constant and Gutmann donor number, we could grow phase-pure two-dimensional (2D) halide perovskite stacks of the desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. Characterization reveals a 3D-2D transition region of 20 nanometers mainly determined by the roughness of the bottom 3D layer. Thickness dependence of the 2D perovskite layer reveals the anticipated trends for n-i-p and p-i-n architectures, which is consistent with band alignment and carrier transport limits for 2D perovskites. We measured a photovoltaic efficiency of 24.5%, with exceptional stability of T 99 (time required to preserve 99% of initial photovoltaic efficiency) of >2000 hours, implying that the 3D/2D bilayer inherits the intrinsic durability of 2D perovskite without compromising efficiency.

All-solid-state sodium batteries (ASSSBs) are promising candidates for grid-scale energy storage. However, there are no commercialized ASSSBs yet, in part due to the lack of a low-cost, simple-to-fabricate solid electrolyte (SE) with electrochemical stability towards Na metal. In this work, we report a family of oxysulfide glass SEs (Na 3 PS 4-x O x , where 0 < x ≤ 0.60) that not only exhibit the highest critical current density among all Na-ion conducting sulfide-based SEs, but also enable high-performance ambient-temperature sodium-sulfur batteries. By forming bridging oxygen units, the Na 3 PS 4-x O x SEs undergo pressure-induced sintering at room temperature, resulting in a fully homogeneous glass structure with robust mechanical properties. Furthermore, the self-passivating solid electrolyte interphase at the Na|SE interface is critical for interface stabilization and reversible Na plating and stripping. The new structural and compositional design strategies presented here provide a new paradigm in the development of safe, low-cost, energy-dense, and long-lifetime ASSSBs., (© 2022. The Author(s).)

Microbial bioelectronic devices integrate naturally occurring or synthetically engineered electroactive microbes with microelectronics. These devices have a broad range of potential applications, but engineering the biotic-abiotic interface for biocompatibility, adhesion, electron transfer, and maximum surface area remains a challenge. Prior approaches to interface modification lack simple processability, the ability to pattern the materials, and/or a significant enhancement in currents. Here, a novel conductive polymer coating that significantly enhances current densities relative to unmodified electrodes in microbial bioelectronics is reported. The coating is based on a blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) crosslinked with poly(2-hydroxyethylacrylate) (PHEA) along with a thin polydopamine (PDA) layer for adhesion to an underlying indium tin oxide (ITO) electrode. When used as an interface layer with the current-producing bacterium Shewanella oneidensis MR-1, this material produces a 178-fold increase in the current density compared to unmodified electrodes, a current gain that is higher than previously reported thin-film 2D coatings and 3D conductive polymer coatings. The chemistry, morphology, and electronic properties of the coatings are characterized and the implementation of these coated electrodes for use in microbial fuel cells, multiplexed bioelectronic devices, and organic electrochemical transistor based microbial sensors are demonstrated. It is envisioned that this simple coating will advance the development of microbial bioelectronic devices., (© 2022 Wiley-VCH GmbH.)

The template-free unidirectional alignment of lamellar block copolymers ( l -BCPs) for sub-10 nm high-resolution patterning and hybrid multicomponent nanostructures is important for technological applications. We demonstrate a modified soft-shear-directed self-assembly (SDSA) approach for aligning pristine l -BCPs and l -BCPs with incorporated polymer-grafted nanoparticles (PGNPs), as well as the l -BCP conversion to aligned gold nanowires, and hybrid of metallic gold nanowire and dielectric silica nanoparticle in the form of line-dot nanostructures. The smallest patterns have a half-pitch as small as 9.8 nm. In all cases, soft-shear is achieved using a high-molecular-mass polymer topcoat layer, with support on a neutral bottom layer. We also show that the hybrid line-dot nanostructures have a red-shifted plasmonic response in comparison to neat gold nanowires. These template-free aligned BCPs and nanowires have potential use in nanopatterning applications, and the line-dot nanostructures should be useful in the sensing of biomolecules and other molecular species based on the plasmonic response of the nanowires.

Surface morphology, in addition to hydrophobic and electrostatic effects, can alter how proteins interact with solid surfaces. Understanding the heterogeneous dynamics of protein adsorption on surfaces with varying roughness is experimentally challenging. In this work, we use single-molecule fluorescence microscopy to study the adsorption of α-lactalbumin protein on the glass substrate covered with a self-assembled monolayer (SAM) with varying surface concentrations. Two distinct interaction mechanisms are observed: localized adsorption/desorption and continuous-time random walk (CTRW). We investigate the origin of these two populations by simultaneous single-molecule imaging of substrates with both bare glass and SAM-covered regions. SAM-covered areas of substrates are found to promote CTRW, whereas glass surfaces promote localized motion. Contact angle measurements and atomic force microscopy imaging show that increasing SAM concentration results in both increasing hydrophobicity and surface roughness. These properties lead to two opposing effects: increasing hydrophobicity promotes longer protein flights, but increasing surface roughness suppresses protein dynamics resulting in shorter residence times. Our studies suggest that controlling hydrophobicity and roughness, in addition to electrostatics, as independent parameters could provide a means to tune desirable or undesirable protein interactions with surfaces.

Bottlebrush polymers are complex macromolecules with tunable physical properties dependent on the chemistry and architecture of both the side chains and the backbone. Prior work has demonstrated that bottlebrush polymer additives can be used to control the interfacial properties of blends with linear polymers but has not specifically addressed the effects of bottlebrush side chain microstructures. Here, using a combination of experiments and self-consistent field theory (SCFT) simulations, we investigated the effects of side chain microstructures by comparing the segregation of bottlebrush additives having random copolymer side chains with bottlebrush additives having a mixture of two different homopolymer side chain chemistries. Specifically, we synthesized bottlebrush polymers with either poly(styrene- ran -methyl methacrylate) side chains or with a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA) side chains. The bottlebrush additives were matched in terms of PS and PMMA compositions, and they were blended with linear PS or PMMA chains that ranged in length from shorter to longer than the bottlebrush side chains. Experiments revealed similar behaviors of the two types of bottlebrushes, with a slight preference for mixed side-chain bottlebrushes at the film surface. SCFT simulations were qualitatively consistent with experimental observations, predicting only slight differences in the segregation of bottlebrush additives driven by side chain microstructures. Specifically, these slight differences were driven by the chemistries of the bottlebrush polymer joints and side chain end-groups, which were entropically repelled and attracted to interfaces, respectively. Using SCFT, we also demonstrated that the interfacial behaviors were dominated by entropic effects with high molecular weight linear polymers, leading to enrichment of bottlebrush near interfaces. Surprisingly, the SCFT simulations showed that the chemistry of the joints connecting the bottlebrush backbones and side chains played a more significant role compared with the side chain end groups in affecting differences in surface excess of bottlebrushes with random and mixed side chains. This work provides new insights into the effects of side chain microstructure on segregation of bottlebrush polymer additives.

Aim: To investigate (1) the cytotoxic potential of the brown precipitate (BP) formed with sodium hypochlorite (NaOCl) and chlorhexidine gluconate (CHX), using both a small animal model of Caenorhabditis elegans (C. elegans) and cultured human gingival fibroblasts; and (2) the chemical composition of BP using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS)., Methodology: Brown precipitate was obtained by mixing equal volumes of 6% NaOCl and 2% CHX and separating the BP from clear supernatant by centrifugation. The brown precipitate was weighed and solubilized in dimethyl sulfoxide for cytotoxicity experiments. The cytotoxic effect of BP was assessed using C. elegans larvae and primary immortalized human gingival fibroblasts-hTERT (hTERT-hNOF) cells. Various dilutions of BP (25 ng/µL-150 ng/µL), supernatant (0.15% v/v), NaOCl (1:100-1:1000 dilutions of 6% NaOCl) or CHX (1:500-1:1000 dilutions of 2% CHX) along with vehicle control (0.5% v/v ethanol and 0.15% v/v DMSO) or untreated control (growth medium) were tested on C. elegans larvae and hTERT-hNOF cells. Viability was assessed in C. elegans larvae using stereomicroscopy and in hTERT-hNOF cells using dehydrogenase-based colorimetric assay. ToF-SIMS was used to assess the chemical composition of BP in comparison with CHX and para-chloroaniline (PCA). The C. elegans and cell line data were analysed using Log-Rank test and Student's t-test, respectively (p < .05)., Results: BP-75 ng/µL and BP-150 ng/µL were significantly more toxic to C. elegans larvae than the untreated, vehicle, supernatant or CHX treatment groups (p < .0001). Similarly, in hTERT-hNOF cells, BP-50 ng/µL, BP-75 ng/µL and BP-150 ng/µL induced significant cytotoxicity within 2 h compared with untreated, vehicle, supernatant and CHX treatments (p < .05). ToF-SIMS analysis of BP revealed ion composition characteristic of both CHX and the carcinogen PCA., Conclusions: Brown precipitate was toxic in both C. elegans larvae and hTERT-hNOF cells. The ToF-SIMS analysis of BP revealed ions characteristic of CHX and PCA that could account for the toxicities observed in C. elegans larvae and human gingival fibroblasts. Because of the insoluble and toxic nature of BP, consecutive use of CHX and NaOCl irrigants should be avoided in root canal treatment., (© 2021 British Endodontic Society. Published by John Wiley & Sons Ltd.)

While the phase separation of binary mixtures of chemically different polymer-grafted nanoparticles (PGNPs) is observed to superficially resemble conventional polymer blends, the presence of a "soft" polymer-grafted layer on the inorganic core of these nanoparticles qualitatively alters the phase separation kinetics of these "nanoblends" from the typical pattern of behavior seen in polymer blends and other simple fluids. We investigate this system using a direct immersion annealing method (DIA) that allows for a facile tuning of the PGNPs phase boundary, phase separation kinetics, and the ultimate scale of phase separation after a sufficient "aging" time. In particular, by switching the DIA solvent composition from a selective one (which increases the interaction parameter according to Timmerman's rule) to an overall good solvent for both PGNP components, we can achieve rapid switchability between phase-separated and homogeneous states. Despite a relatively low and non-classical power-law coarsening exponent, the overall phase separation process is completed on a time scale on the order of a few minutes. Moreover, the roughness of the PGNP blend film saturates at a scale that is proportional to the in-plane phase separation pattern scale, as observed in previous blend and block copolymer film studies. The relatively low magnitude of the coarsening exponent n is attributed to a suppression of hydrodynamic interactions between the PGNPs. The DIA method provides a significant opportunity to control the phase separation morphology of PGNP blends by solution processing, and this method is expected to be quite useful in creating advanced materials.

Zeolite crystal growth mechanisms are not fully elucidated owing to their complexity wherein the formation of a particular zeolite can occur by more than one crystallization pathway. Here, we have conducted time-resolved dissolution experiments of MFI-type zeolite crystals in ammonium fluoride medium where detailed structural analysis allowed us to extrapolate and elucidate the possible mechanism of nucleation and crystal growth. A combination of electron and scanning probe microscopy shows that dissolution initiates preferentially at lattice defects and progressively removes defect zones to reveal a mosaic structure of crystalline domains within each zeolite crystal. This mosaic architecture evolves during the growth process, reflecting the changing conditions of zeolite formation that can be retroactively assessed during zeolite crystal dissolution. Moreover, a more general implication of this study is the establishment that dissolution can be used successfully as an ex situ technique to uncover details about crystal growth features inaccessible by other methods., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

This study examines the compatibility of multielectrolyte additives for NMC-silicon lithium-ion batteries. Research studies with Si-based anodes have shown stable reversible cycling using electrolytes containing fluoroethylene carbonate (FEC). At the same time, the electrolyte additive, tris(trimethylsilyl) phosphite (TTMSP), has shown to improve the electrochemical performance of nickel-rich layered cathodes, such as LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC). However, the combination of these electrolyte additives for the realization of a full-cell NMC-Si lithium-ion battery has not been previously explored. Changes in the electrochemical performance (capacity retention, internal cell resistance, and electrochemical impedance) in half-cells are studied as the ratio of TTMSP and FEC is tuned. At the optimal TTMSP/FEC ratio of 0.33 (T1F3), the NMC-Si full-cells achieve a 2× longer cycle life when compared to the FEC-rich (T0F4) electrolyte. Moreover, T1F3 full-cells demonstrate 1.5 mAh/cm 2 areal capacities and high-capacity retention (25% more than T0F4). A detailed investigation of the electrode-electrolyte interfaces is conducted by using time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). The chemical species depth profiles and elemental analysis illustrate adequate hydrogen fluoride (HF) scavenging. These results demonstrate the synergistic effects of electrolyte additives in minimizing the capacity degradation in NMC-Si full-cells by effectively stabilizing the electrode-electrolyte interfaces.

Halide perovskites are revolutionizing the renewable energy sector owing to their high photovoltaic efficiency, low manufacturing cost, and flexibility. Their remarkable mobility and long carrier lifetime are also valuable for information technology, but fundamental challenges like poor stability under an electric field prevent realistic applications of halide perovskites in electronics. Here, it is discovered that valleytronics is a promising route to leverage the advantages of halide perovskites and derivatives for information storage and processing. The synthesized all-inorganic lead-free perovskite derivative, Cs 3 Bi 2 I 9 , exhibits strong light-matter interaction and parity-dependent optically addressable valley degree of freedom. Robust optical helicity in all odd-layer-number crystals with inversion symmetry breaking is observed, indicating excitonic coherence extending well beyond 11 layers. The excellent optical and valley properties of Cs 3 Bi 2 I 9 arise from the unique parallel bands, according to first principles calculations. This discovery points to new materials design principles for scalable valleytronic devices and demonstrates the promise of perovskite derivatives beyond energy applications., (© 2020 Wiley-VCH GmbH.)

Bottlebrush polymers can be used to introduce novel surface properties including hydrophilicity, stimuli-responsiveness, and reduced friction forces. However, simple, general, and efficient approaches to cross-linking bottlebrush polymer films and coatings are limited. Here, we report that bottlebrush polymers with an unsaturated polynorbornene backbone and thiol-terminated side chains can be cross-linked on demand by UV irradiation to produce uniform and insoluble bottlebrush polymer coatings. To quantify the kinetics and efficiency of cross-linking by UV exposure (254 nm), we measured the normalized residual thickness (NRT) of bottlebrush and linear polymer films after UV exposure and solvent washing. For bottlebrush polymers with thiol-terminated polystyrene (PS) side chains, the NRT exceeded 60% for a UV dose of 1.0 J/cm 2 , while unfunctionalized linear PS required a dose of 7.9 J/cm 2 to achieve similar NRT values. Rapid UV-induced cross-linking of the bottlebrush PS was attributed to the thiol-ene coupling of the thiol-terminated side chains with the unsaturated polynorbornene backbones, as demonstrated through FTIR measurements and control studies involving bottlebrush polymers with saturated backbones. To establish the broader applicability of this approach, UV-induced cross-linking was demonstrated for thin films of bottlebrush polymers with thiol-terminated poly(methyl acrylate) (BB-PMMA-SH) side chains and those with poly(ethylene glycol) (BB-PEG) and poly(lactic acid) (BB-PLA) side chains which do not contain thiol end groups. UV-induced cross-linking of BB-PEG and BB-PLA films required the use of a multifunctional thiol additive. Finally, we demonstrated that bottlebrush polymer multilayers can be fabricated through sequential deposition and UV-induced cross-linking of different bottlebrush polymer chemistries. The cross-linking process outlined in this work is simple, general, and efficient and produces solvent-resistant coatings that preserve the unique properties and functions of bottlebrush polymers.

The emergence of cesium lead iodide (CsPbI 3 ) perovskite solar cells (PSCs) has generated enormous interest in the photovoltaic research community. However, in general they exhibit low power conversion efficiencies (PCEs) because of the existence of defects. A new all-inorganic perovskite material, CsPbI 3 :Br:InI 3 , is prepared by defect engineering of CsPbI 3 . This new perovskite retains the same bandgap as CsPbI 3 , while the intrinsic defect concentration is largely suppressed. Moreover, it can be prepared in an extremely high humidity atmosphere and thus a glovebox is not required. By completely eliminating the labile and expensive components in traditional PSCs, the all-inorganic PSCs based on CsPbI 3 :Br:InI 3 and carbon electrode exhibit PCE and open-circuit voltage as high as 12.04% and 1.20 V, respectively. More importantly, they demonstrate excellent stability in air for more than two months, while those based on CsPbI 3 can survive only a few days in air. The progress reported represents a major leap for all-inorganic PSCs and paves the way for their further exploration in order to achieve higher performance., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Manual assembly of atomically thin materials into heterostructures with desirable electronic properties is an approach that holds great promise. Despite the rapid expansion of the family of ultrathin materials, stackable and stable ferro/ferri magnets that are functional at room temperature are still out of reach. We report the growth of air-stable, transferable ultrathin iron oxide crystals that exhibit magnetic order at room temperature. These crystals require no passivation and can be prepared by scalable and cost-effective chemical vapor deposition. We demonstrate that the bonding between iron oxide and its growth substrate is van der Waals-like, enabling us to remove the crystals from their growth substrate and prepare iron oxide/graphene heterostructures.

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a high performance tool for molecular depth profiling of polymer films, in particular when they are structured in microphases. However, a major issue is the degradation of polymer materials under ion irradiation in reactions such as cross-linking, chain breaking, or reorganization processes of polymers which have been demonstrated for materials such as polystyrene (PS) and poly(methyl methacrylate) (PMMA). This work aims at comparing ToF-SIMS molecular depth profiling of structured polymers (polystyrene (PS)-b-polymethyl methacrylate (PMMA) block copolymers (BCP)) using either ultralow energy cesium or the more recently introduced C 60 ++ (under NO dosing and with sample cooling) and argon cluster ion beams (using Ar 1500 + ions at 5 keV). The latter improved the quality of the depth profiles, especially the argon cluster ion beam, as it is characterized by a greater homogeneity for the sputter yields of PS and PMMA. No significant artifacts were observed, and this was confirmed by the comparison of depth profiles obtained from films with variable thickness, annealing time, and morphology (cylindrical blocks vs spherical blocks). Comparison to a theoretical model (hexagonal centered pattern) ensured that the ToF-SIMS depth profiles described the real morphology and may thus be a relevant characterization tool to verify the morphology of the films as a function of the deposition parameters.

SiGe and its alloys are used as key materials in innovative electronic devices. The analysis of these materials together with the localisation of dopants and impurities on a very fine scale is of crucial importance for better understanding their electronic properties. The quantification of carbon and germanium in an as-grown Si/SiGeC superlattice has been investigated using Atom Probe Tomography as a function of analysis conditions and sample anneal temperature. The mass spectrum is heavily influenced by the analysis conditions and chemical identification is needed. It was found that quantitative results are obtained using a intermediate electric field. The evaporation of carbon ions shows a strong spatial and temporal correlation. A series of annealed samples have been analysed, presenting an inhomogeneous carbon distribution, appearing in the shape of small clusters. These findings confirm previous results and give a better understanding of the processes occurring in these technologically important materials., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The quantification of carbon and germanium in a Si/SiGeC multilayer structure using atom probe tomography has been investigated as a function of analysis conditions. The best conditions for quantitative results are obtained using an intermediate electric field and laser power. Carbon evaporation shows strong spatial and temporal correlation. By using multi-ion event analysis, an evaporation mechanism is put forward to explain the modification of mass spectra as a function of electric field and laser power., (Copyright © 2014 Elsevier B.V. All rights reserved.)