Search

Agricultural feedstocks (brewers’ spent grain – BSG, corncob – CC, corn husk – CH, wheat straw – WS and Luffa sponge – LS) were pretreated by liquid hot water (LHW) in order to increase cellulose recovery and enzymatic saccharification. LHW-pretreatment resulted in hemicellulose solubilization, and solids enriched in cellulose. Chemical analysis showed different susceptibilities of the feedstocks to LHW-pretreatment and enzymatic hydrolysis. Pretreated feedstocks presented higher crystallinity (determined through X-ray diffraction) and thermal stability (determined through thermogravimetric analysis) than untreated feedstocks. SEM images confirmed the effect of LHW-pretreatment on structural changes. Moreover, enzymatic hydrolysis and cellulose conversion to glucose (CCG) were improved for pretreated feedstocks, with exception of LS. CCG (in relation to glucose potential on solids) followed the order: BSG > CH > WS > CC > LS. LHW-pretreatment showed to be a good technology to pretreat multi feedstocks and for improving the enzymatic hydrolysis of recalcitrant agricultural feedstocks to sugars, which can be further converted to ethanol-fuel and other value-added chemicals. [ABSTRACT FROM AUTHOR]

Grape stems have emerged as a promising natural ingredient in the cosmetics industry due to their abundance of phenolic compounds, known for their antioxidant and anti-inflammatory properties. These compounds have shown great potential in promoting skin health, fighting signs of aging, and shielding against environmental stressors. With high concentrations of resveratrol, flavonoids, and tannins, grape stems have garnered attention from cosmetic scientists. Research has indicated that phenolic compounds extracted from grape stems possess potent antioxidant abilities, effectively combating free radicals that accelerate aging. Moreover, these compounds have demonstrated the capacity to shield the skin from UV damage, boost collagen production, and enhance skin elasticity. Cosmetic formulations incorporating grape stem extracts have displayed promising results in addressing various skin concerns, including reducing wrinkles, fine lines, and age spots, leading to a more youthful appearance. Additionally, grape stem extracts have exhibited anti-inflammatory properties, soothing irritated skin and diminishing redness. Exploring the potential of grape stem phenolic compounds for cosmetics paves the way for sustainable and natural beauty products. By harnessing the beauty benefits of grape stems, the cosmetics industry can provide effective and eco-friendly solutions for consumers seeking natural alternatives. Ongoing research holds the promise of innovative grape stem-based formulations that could revolutionize the cosmetics market, fully unlocking the potential of these extraordinary botanical treasures. [ABSTRACT FROM AUTHOR]

Abstract Obesity, a highly prevalent condition worldwide that leads to the development of multiple metabolic diseases, has been related to gut microbial dysbiosis. To understand this correlation, in vivo models have been extremely useful. However, its use is limited by associated ethical concerns, high costs, low representativeness, and low reproducibility. Therefore, new and improved in vitro models have been developed in recent years, representing a promising tool in the study of the role of gut microbiota modulation in weight management and metabolic health. This review aims to provide an update on the main findings obtained in vitro regarding gut microbiota modulation with probiotics, and food compounds, and its interaction with the host metabolism, associated with obesity. Available in vitro colon models currently used to study obesity are discussed, including batch and dynamic fermentation systems, and models that allow the study of microbiota-host interactions using cell cultures. In vitro models have demonstrated that homeostatic microbiota may help overcome obesity by producing satiety-related neurotransmitters and metabolites that protect the gut barrier and improve the metabolic activity of adipose tissue. In vitro models may be the key to finding new treatments for obesity-related disorders. [ABSTRACT FROM AUTHOR]

Abstract Cooperage wood is a porous material and beverages exchange compounds with it by penetrating into its pores. This work demonstrates the enrichment of wood with wine during ageing. Three oak varieties were cut into different sized chips and immersed in fortified wine and water. Wine and water uptake were measured along time and sorption was described based on a saturation empirical model. Maximum uptake varied among wood types and was independent of particle size, which affected only equilibrium time. Sorption of wine volatiles such as alcohols, esters and acids in wood was shown, which was also dependent on wood type and independent of particle size. Multivariate analysis demonstrated differences and similarities in depletion of wood extractives and sorption of wine volatiles depending on wood variety. Sorption shown in this work demonstrates wood as a vector for aroma recombination, when reused for ageing between different beverages. Graphical abstract Unlabelled Image Highlights • Oak wood is enriched with wine during ageing processes • Wine penetrates oak wood pores, mainly by diffusion, following a saturation model • After contact, wine volatiles are retained in wood alongside wood extractives • Wine uptake and volatile compounds retention are dependent on oak wood variety • Wood can be a vector for transferring aromas when reused [ABSTRACT FROM AUTHOR]

Microbial production of hyaluronic acid (HA) is an area of research that has been gaining attention in recent years due to the increasing demand for this biopolymer for several industrial applications. Hyaluronic acid is a linear, non-sulfated glycosaminoglycan that is widely distributed in nature and is mainly composed of repeating units of N-acetylglucosamine and glucuronic acid. It has a wide and unique range of properties such as viscoelasticity, lubrication, and hydration, which makes it an attractive material for several industrial applications such as cosmetics, pharmaceuticals, and medical devices. This review presents and discusses the available fermentation strategies to produce hyaluronic acid. [ABSTRACT FROM AUTHOR]

In recent years, there has been an increased motivation to reduce meat consumption globally due to environmental and health concerns, which has driven the development of meat substitutes. Filamentous fungal biomass, commonly known as mycoprotein, is a potential meat substitute since it is nutritious and has filaments to mimic meat fibrils. The current study aimed to investigate the potential use of a cheap substrate derived from the food industry, i.e., residual water in a tempeh factory, for mycoprotein production. The type of residual water, nutrient supplementation, optimum conditions for biomass production, and characteristics of the mycoprotein were determined. The results showed that the residual water from the first boiling with yeast extract addition gave the highest mycoprotein content. The optimum growth condition was a pH of 4.5 and agitation of 125 rpm, and it resulted in 7.76 g/L biomass. The mycoprotein contains 19.44% (w/w) protein with a high crude fiber content of 8.51% (w/w) and a low fat content of 1.56% (w/w). In addition, the amino acid and fatty acid contents are dominated by glutamic acid and polyunsaturated fatty acids, which are associated with an umami taste and are considered healthier foods. The current work reveals that the residual boiling water from the tempeh factory can be used to produce high-quality mycoprotein. [ABSTRACT FROM AUTHOR]

The quality standards for the export of chestnuts generate large quantities of rejected fruits, which require novel processing technologies for their safe industrial utilization. This study aimed to investigate the impact of high-pressure processing (HPP) and hydrothermal treatments (HT) on the physicochemical properties of rejected chestnut starch. Chestnuts were treated by HPP at 400, 500, and 600 MPa for 5 min and HT at 50 °C for 45 min. In general, all HPP treatments did not induce starch gelatinization, and their granules preserved the integrity and Maltese-cross. Moreover, starch granules' size and resistant starch content increased with the intensity of pressure. Native and HT chestnut starches were the most susceptible to digestion. HPP treatments did not affect the C-type crystalline pattern of native starch, but the crystalline region was gradually modified to become amorphous. HPP-600 MPa treated starch showed modified pasting properties and exhibited the highest values of peak viscosity. This study demonstrates for the first time that after HPP-600 MPa treatment, a novel chestnut starch gel structure is obtained. Moreover, HPP treatments could increase the slow-digesting starch, which benefits the development of healthier products. HPP can be considered an interesting technology to obtain added-value starch from rejected chestnut fruits. [ABSTRACT FROM AUTHOR]

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted. [ABSTRACT FROM AUTHOR]

Aloe vera has been medicinally used for centuries. Its bioactive compounds have been shown to be very effective in the treatment of numerous diseases. In this work, a novel functional beverage was developed and characterized to combine the health benefits of probiotic bacteria with the Aloe vera plant itself. Two Aloe vera juices were obtained by fermentation either by a novel isolated Enterococcus faecium or a commercial Lactococcus lactis. The extraction of Aloe vera biocompounds for further fermentation was optimized. Extraction with water plus cellulase enhanced the carbohydrates and phenolic compounds in the obtained extracts. The biotransformation of the bioactive compounds from the extracts during fermentation was assessed. Both probiotic bacteria were able to grow on the Aloe vera extract. Lactic acid and short-chain fatty acids (SCFA) together with fourteen individual phenolic compounds were quantified in the produced Aloe vera juice, mainly epicatechin, aloin, ellagic acid, and hesperidin. The amount of total phenolic compounds was maintained through fermentation. The antioxidant activity was significantly increased in the produced juice by the ABTS method. The novel produced Aloe vera juice showed great potential as a functional beverage containing probiotics, prebiotics, SCFA, and phenolic compounds in its final composition. [ABSTRACT FROM AUTHOR]

Chitooligosaccharides (COS) have a great potential to be used by pharmaceutical industry due to their many biological activities. The use of enzymes to produce them is very advantageous, however it still faces many challenges, such as discovering new strains capable to produce enzymes that are able to generate bioactive oligosaccharides. In the present study a purification protein protocol was performed to purify chitosanases produced by Bacillus toyonensis CCT 7899 for further chitosan hydrolysis. The produced chitooligosaccharides were characterized by mass spectroscopy (MS) and their antiedematogenic effect was investigated through carrageenan-induced paw edema model. The animals were treated previously to inflammation by intragastric route with COS at 30, 300 and 600 mg/kg. The purification protocol showed a good performance for the chitosanases purification using 0.20 M NaCl solution to elute it, with a 9.54-fold purification factor. The treatment with COS promoted a decrease of paw edema at all evaluated times and the AUC0–4h, proving that COS produced showed activity in acute inflammation like commercial anti-inflammatory Dexamethasone (corticosteroid). Therefore, the strategy used to purification was successfully applied and it was possible to generate bioactive oligosaccharides with potential pharmacological use. [ABSTRACT FROM AUTHOR]

This study assessed the chemical profiles and bioactivities of the infusions, decoctions and hydroethanolic extracts of tarragon, basil and French lavender. The extracts were chemically characterised (HPLC-DAD-ESI/MS) and their bioactivities were evaluated in vitro. All extracts revealed antimicrobial, antifungal and antioxidant properties. French lavender extracts showed higher total phenolic content, regardless of the extraction method used, and antioxidant and antitumour capacities, but no anti-inflammatory action. All basil and two of the tarragon extracts revealed anti-inflammatory power. Thus, tarragon, basil and French lavender extracts may be considered for inclusion in foods, as preservatives or functional ingredients. Nonetheless, further studies must be conducted to evaluate the pharmacokinetic parameters of the bioactive compounds. • All extracts demonstrated antimicrobial, antifungal and antioxidant properties. • Basil and French lavender infusions showed the highest total phenolic content. • Tarragon decoction showed the highest anti-inflammatory capacity (IC 50 = 34.6 μg/mL). • All French lavender extracts were active against, at least, three tumour cell lines. • Hydroethanolic extracts showed undesirable toxicity against non-tumour hFOB cells. [ABSTRACT FROM AUTHOR]

Abstract: Ochratoxin A (OTA) is a mycotoxin found in several food and feed products. Due to its acute toxicity, innovative biological strategies to degrade OTA have been sought. In previous studies, Aspergillus niger MUM 03.58 was found to produce one promising OTA-hydrolyzing enzyme for food and feed applications. In this paper, we describe the optimization of a solid-state fermentation (SSF) process to produce this enzyme using the one-factor-at-a-time and the Taguchi experimental design approaches. A preliminary evaluation of the fermentation time, substrate moisture content and type of carbon source was done by the one-factor-at-a-time method. A final maximization of the OTA-hydrolyzing enzyme production was done using Taguchi’s experimental design. An L9 orthogonal array was used to evaluate the effect of four factors at three levels. The substrate composition, the fermentation time, the operating temperature and the moisture content of the substrate were the factors evaluated. The results were tested by ANOVA and optimum conditions for a verification test were determined by statistical calculations. The optimized conditions were 30g of wheat bran at 70% moisture incubated for 14days at 25°C. A final productivity of 154U/g substrate was achieved, which represents an approximately 3.7-fold increase in enzyme yield when compared with the starting point conditions. [Copyright &y& Elsevier]

The ability of biosurfactant obtained from the probiotic bacteriumLactococcus lactis53 to inhibit adhesion of four bacterial and two yeast strains isolated from explanted voice prostheses to silicone rubber with and without an adsorbed biosurfactant layer was investigated in a parallel-plate flow chamber. The microbial cell surfaces and the silicone rubber with and without an adsorbed biosurfactant layer were characterized using contact-angle measurements. Water contact angles indicated that the silicone-rubber surface with adsorbed biosurfactant was more hydrophilic (48°) than bare silicone rubber (109°). The results showed that the biosurfactant was effective in decreasing the initial deposition rates ofStaphylococcus epidermidisGB 9/6 from 2,100 to 220 microorganisms cm-2 s-1,Streptococcus salivariusGB 24/9 from 1,560 to 137 microorganisms cm-2 s-1, andStaphylococcus aureusGB 2/1 from 1,255 to 135 microorganisms cm-2 s-1, allowing for a 90% reduction of the deposition rates. The deposition rates ofRothia dentocariosaGBJ 52/2B,Candida albicansGBJ 13/4A, andCandida tropicalisGB 9/9 were far less reduced in the presence of the biosurfactant as compared with the other strains. This study constitutes a step ahead in developing strategies to prevent microbial colonization of silicone-rubber voice prostheses. [ABSTRACT FROM AUTHOR]

• Cardinal values can be estimated by meta-analysing literature growth data. • The meta-regression models built provide an insight on sources of variability. • The cardinal values obtained can be used as reference values for risk assessments. Since Listeria monocytogenes has a high case-fatality rate, substantial research has been devoted to estimate its growth rate under different conditions of temperature, pH and water activity (a w). In this study, published findings on L. monocytogenes growth in broth were extracted and unified by constructing meta-regression models based on cardinal models for (i) temperature (CM[T]), (ii) temperature and pH (CM[T][pH]), and (iii) temperature, pH and a w (CM[T][pH][a w ]). After assessing all the sources retrieved between 1988 until 2017, forty-nine primary studies were considered appropriate for inclusion. Apart from the modelling variables, study characteristics such as: type of broth (BHI, TSB, TPB), reading method (colony-forming-units, CFU; or binary-dilution optical density methods, OD), inoculum concentration and strain serotype, were also extracted. Meta-regressions based on CM[T] and CM[T][pH] were fitted on subsets of the 2009 growth rate measures and revealed that type of broth and reading method significantly modulated the cardinal parameter estimates. In the most parsimonious CM[T][pH][a w ] meta-regression model, whereby the variability due to type of broth was extracted in a nested random-effects structure, the optimum growth rate μ opt of L. monocytogenes was found to be lower when measured as CFU (0.947 log CFU/h; SE = 0.094 log CFU/h) than when measured as OD (1.289 log CFU/h; SE = 0.092 log CFU/h). Such a model produced the following cardinal estimates: T min = -1.273 °C (SE = 0.179 °C), T opt = 37.26 °C (SE = 0.688 °C), T max = 45.12 °C (SE = 0.013 °C), pH min = 4.303 (SE = 0.014), pH opt = 7.085 (SE = 0.080), pH max = 9.483 (SE = 0.080), a w min = 0.894 (SE = 0.002) and a w opt = 0.995 (SE = 0.001). Integrating the outcomes from numerous L. monocytogenes growth experiments, this meta-analysis has estimated pooled cardinal parameters that can be used as reference values in quantitative risk assessment studies. [ABSTRACT FROM AUTHOR]

Nanocomposite films prepared from starch (ST) in the presence of cellulose nanocrystals (CNCs) was performed using grape pomace as raw material. CNCs were obtained by acid hydrolysis and added to filmogenic solutions (1, 2, 5, 10 and 15 g/100 g of ST). Cellulose, CNCs and Nanocomposites were characterized. Amorphous non-cellulosic materials were removed from the grape pomace presented values for CrI 64% and 71% and yield 12 and 70% in Cellulose and CNCs, respectively. Nanocomposites showed smaller permeability and the addition of 5 to 15% CNCs formed more opaque films and had improved tensile strength and Young's modulus. The addition of CNCs from 5 to 15% proved to be effective in improving mechanical properties and decreasing water vapor permeability, important characteristics in food packaging materials. This study provided an effective method to obtain CNCs from the agroindustrial waste and open the way to produce high-value starch based nanocomposites. Unlabelled Image • Grape pomace can be used as raw material for celllulose and cellulose nanocrystals. • Acid hydrolysis leads to the production of high crystallinity cellulose nanocrystals. • The incorporation of the cellulose nanocrystals was able to decrease the WVP values of the films. • The incorporation of cellulose nanocrystals increased the tensile strength and Young's modulus in the films. [ABSTRACT FROM AUTHOR]

Purpose: Wheat bran fibre has a beneficial effect on gastrointestinal function, but evidence for wheat germ is scarce. Accordingly, we evaluated the effects of daily intake of wheat germ on gastrointestinal discomfort and gut microbiota by adding wheat germ to refined (white) wheat bread, the most consumed bread type. We hypothesised that an improvement in the composition of refined bread could beneficially affect intestinal health without compromising consumers' acceptance. Methods: Fifty-five healthy adults were recruited for a randomised, double-blind, crossover, controlled trial comprising two 4-week intervention periods separated by a 5-week washout stage. During the first 4-week period, one group consumed wheat bread enriched with 6 g of wheat germ and the control group consumed non-enriched wheat bread. Results: Wheat germ-enriched bread was well-appreciated and the number of participants that demonstrated minimal gastrointestinal improvements after wheat-germ intake was higher than in the control arm. Importantly, intake of wheat germ-enriched bread decreased the perceived gastrointestinal discomfort-related quality of life (subscale worries and concerns) over refined white bread. The improvements in the gastrointestinal function were accompanied by favourable changes in gut microbiota, increasing the number of Bacteroides spp. and Bifidobacterium spp. Conclusions: Adding wheat germ to industrially made white bread without altering sensory properties may promote a healthy gut bacterial microbiota and the gastrointestinal health. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Penicillium citreonigrum URM4459 produced fructooligosaccharides (FOS) in one-step. • 0.65 g FOS /g initial.Sucrose yield, 126.3 g/L FOS content and 61% purity was achieved. • P. citreonigrum URM4459 produce neoFOS, possibly neokestose. • FOS showed resistance to hydrolysis under gastrointestinal simulation. • Specific probiotic strains grew faster with the produced FOS. Abstract A new isolated P. citreonigrum URM 4459 was selected to produce fructooligosaccharides (FOS) in an efficient, economical and fast one-step fermentation. Optimal culture conditions were stablished by experimental design. Experiments run in bioreactor resulted in a high yield, content, productivity and purity of FOS (0.65 ± 0.06 g FOS /g initial Sucrose , 126.3 ± 0.1 g/L, 2.28 ± 0.08 g/L.h and 61 ± 0%). The FOS mixture was purified up to 92% (w/w) with an activated charcoal column. FOS produced were able to promote lactobacilli and bifidobacteria growth. Higher bacteria cell density was obtained for microbial-FOS mixtures than commercial Raftilose® P95. Some strains grew even faster in the FOS mixture produced than in all other carbon sources. FOS were resistant to the simulated gastrointestinal conditions. A high amount of a reducing trisaccharide was identified in the FOS produced mixture, possibly neokestose, which may explain the great prebiotic potential of the FOS. [ABSTRACT FROM AUTHOR]

A growing world population and a growing number of applications for vegetable oils are generating an increasing demand for these oils, causing serious environmental problems. A sustainable lipid production is then fundamental to address these problems. Oleaginous yeasts are a promising solution for sustainable lipid production, but, with the current knowledge and technology, they are still not a serious alternative in the market. In this review, the potential of these yeasts is highlighted and a discussion is made mainly focused on the economics of the oleaginous yeast oil production and identification of the key points to be improved to achieve lower production costs and higher income. Three main stages of the production process, where costs are higher, were identified. To render economically feasible the production of oils using oleaginous yeasts, a reduction in production costs must occur in all stages, lipid yields and productivities must be improved, and production must be targeted to high-value product applications. [ABSTRACT FROM AUTHOR]

Highlights • Hydrogels are 3D, hydrophilic, polymeric networks linked through physical or chemical bonds. • Hydrogels can present a conformation which allows their use as part of a packaging system. • Moisture control and bioactive agent release are their potential application in food products. Abstract Hydrogels are three-dimensional, hydrophilic networks, comprising polymeric chains linked through physical or chemical bonds. In the area of food, hydrogels have great potential to be used in food packaging systems or as carriers of bioactive components. This paper reviews the nature of hydrogels, their 3D network conformation, their functional properties, and their potential applications in food packaging systems. Regarding their potential food packaging applications, hydrogels can present a conformation which allows their use as part of a packaging system to control the humidity generated by food products with high water content. Moreover, the incorporation of nanoparticles into hydrogels may grant them antimicrobial activity. Finally, although the current research in this field is still limited, the results obtained so far are promising for innovative and potential applications in the food field, which also include their integration into intelligent food packaging systems and their direct incorporation into food matrices as a flavor carrier system. [ABSTRACT FROM AUTHOR]

Abstract Corncob was successively pretreated by liquid hot water (LHW) and ethanol organosolv (EO) in an integrated process. LHW was performed at 200 °C for 30 min, and EO was performed using uncatalyzed ethanol–water solutions, according to a design of experiments. The effects of the most influential operational variables (ethanol concentration, temperature and time) on yield and chemical composition of the fractions were assessed. Results showed the factor with the greatest effect was ethanol concentration (p < 0.05), leading to a high-purity lignin (86.7%–93.1%) with a total phenolic content of around 25 mg GAE/g. Moreover, the solids recovered from the high ethanol concentration conditions presented the lowest lignin contents (15.4%–17.2%) with good preservation of cellulose (82.5%–88.6% of glucans). The lignin antioxidant capacity showed that all lignin samples presented radical scavenging activity (IC 50 of 0.17 mg/mL and 0.016 mg/mL on DPPH (2,2‑diphenyl‑1‑picrylhydrazyl) and ABTS (2,2′‑azino‑bis(3‑ethylbenzothiazoline‑6‑sulphonic acid) assays, respectively) with values close to the commercial antioxidant BHT. Moreover, the chemical (FTIR) and thermal (DSC and TGA) characterization showed lignins with similar properties that were compared with lignin from direct ethanol organosolv process. Results showed that the integrated process of LHW-EO was the most effective way to obtain lignin with high purity and antioxidant capacity. Highlights • The integrated process was more effective in lignin extraction than the direct organosolv process; • The integrated process led to a high purity lignin and a good preservation of the cellulose fraction; • The integrated process recovered lignin with enhanced antioxidant capacity. [ABSTRACT FROM AUTHOR]

In order to establish a clear limit between protective and harmful effects of alcohol consumption, it is necessary to define patterns of consumption. However, there is no universally recognized quantitative classification for patterns of consumption by alcohol doses. This is because the pattern of alcohol consumption does not only describe how much alcohol was consumed, but also takes into account a number of boundary conditions. This review deals with variabilities in the definitions of standard alcohol doses and patterns of alcohol consumption. These terms are being discussed with respect to the benefits and harms associated with alcohol consumption as well as the risks intrinsic to studies of such a complex phenomenon as the effect of alcoholic beverages on human health. [ABSTRACT FROM AUTHOR]

The therapeutic use of probiotics for supporting the antibiotic action against gastrointestinal disorders is a current trend and emerging applications have gained popularity because of their support for various microbiological activities in digestive processes. Microorganisms isolated from kefir with great probiotic properties, in addition to high resistance to harsh environmental conditions, have been widely researched. Administration of probiotic yeasts offers a number of advantages, when compared to bacteria, because of particular characteristics as their larger cell size. In the present study, 28 strains of Saccharomyces cerevisiae were isolated, after in vitro digestion of kefir-fermented milk, and identified by molecular based approaches. A screening was performed to determine important quality requirements for probiotics including: antagonistic and antioxidant activities, β-galactosidase synthesis, autoaggregation, surface hydrophobicity and adhesion to epithelial cells. The results showed strains: with antagonistic activity against microbial pathogens such as Klebsiella pneumoniae , Pseudomonas aeruginosa , Staphylococcus aureus , Bacillus subtilis; able to produce β-galactosidase; with antioxidant activity levels higher than 90%; with hydrophobicity activity and autoaggregation ability (evaluated by adhesion test, where all the strains presented adhesion to mice ileal epithelial cells). These findings are relevant and the strains are recommended for further in vivo studies as well as for potential therapeutic applications. [ABSTRACT FROM AUTHOR]

Cervical cancer is primarily caused by Human papillomavirus (HPV) infection, but other factors such as smoking habits, co-infections and genetic background, can also contribute to its development. Although this cancer is avoidable, it is the fourth most frequent type of cancer in females worldwide and can only be treated with chemotherapy and radical surgery. There is a need for biomarkers that will enable early diagnosis and targeted therapy for this type of cancer. Therefore, a systems biology pipeline was applied in order to identify potential biomarkers for cervical cancer, which show significant reports in three molecular aspects: DNA sequence variants, DNA methylation pattern and alterations in mRNA/protein expression levels. CDH1, CDKN2A, RB1 and TP53 genes were selected as putative biomarkers, being involved in metastasis, cell cycle regulation and tumour suppression. Other ten genes (CDH13, FHIT, PTEN, MLH1, TP73, CDKN1A, CACNA2D2, TERT, WIF1, APC) seemed to play a role in cervical cancer, but the lack of studies prevented their inclusion as possible biomarkers. Our results highlight the importance of these genes. However, further studies should be performed to elucidate the impact of DNA sequence variants and/or epigenetic deregulation and altered expression of these genes in cervical carcinogenesis and their potential as biomarkers for cervical cancer diagnosis and prognosis. [ABSTRACT FROM AUTHOR]

This work presents an inexpensive, simple and fast procedure to purify trypsin based on affinity binding with ferromagnetic particles of azocasein composite (mAzo). Crude extract was obtained from intestines of fish Nile tilapia ( Oreochromis niloticus ) homogenized in buffer (01 g tissue/ml). This extract was exposed to 100 mg of mAzo and washed to remove unbound proteins by magnetic field. Trypsin was leached off under high ionic strength (3 M NaCl). Preparation was achieved containing specific activity about 60 times higher than that of the crude extract. SDS-PAGE showed that the purified protein had molecular weight (24 kDa) in concordance with the literature for the Nile tilapia trypsin. The mAzo composite can be reused and applied to purify trypsin from other sources. [ABSTRACT FROM AUTHOR]

Collagenases are proteolytic enzymes capable of degrading both native and denatured collagen, reported to be applied in industrial, medical and biotechnological sectors. Liquid-liquid extraction using aqueous two-phase system (ATPS) is one of the most promising bioseparation techniques, which can substitute difficult solid-liquid separation processes, offering many advantages over conventional methods including low-processing time, low-cost material and low-energy consumption. The collagenase produced by Penicillium sp. UCP 1286 showed a stronger affinity for the bottom salt-rich phase, where the highest levels of collagenolytic activity were observed at the center point runs, using 15.0% (w/w) PEG 3350 g/mol and 12.5% (w/w) phosphate salt at pH 7.0 and concentration. The enzyme was characterized by thermal stability, pH tolerance and effect of inhibitors, showing optimal collagenolytic activity at 37 °C and pH 9.0 and proved to be a serine protease. ATPS showed high efficiency in the collagenase purification, confirmed by a single band in SDS/PAGE, and can in fact be applied as a quick and inexpensive alternative method. [ABSTRACT FROM AUTHOR]

We demonstrated that a Klura3 Δ, mutant of the yeast Kluyveromyces lactis is able to produce and secrete into the growth medium considerable amounts of orotic acid. Using yeast extract–peptone–glucose (YPD) based media we optimized production conditions in flask and bioreactor cultures. With cells grown in YPD 5% glucose medium, the best production in flask was obtained with a 1:12.5 ratio for flask: culture volume, 180 rpm, 28°C and 200 mM MOPS for pH stabilization at neutral values (initial culture pH at 8.0). The best production in a 2 L bioreactor was achieved at 500 rpm with 1 vvm aeration, 28°C and pH 7.0. Under these optimum conditions, similar rates of orotic acid production were obtained and maximum concentration achieved after 96 h was 6.7 g/L in flask and bioreactor cultures. These results revealed an excellent reproducibility between both systems and provided evidence for the biotechnological potential of Klura3 Δ strain to produce orotic acid since the amounts obtained are comparable to the production in flask using a similar mutant of the industrially valuable Corynebacterium glutamicum . [ABSTRACT FROM AUTHOR]

The partitioning of the whey protein lactoferrin, which is an iron transporter glycoprotein, in an aqueous two-phase system composed of poly(ethylene glycol) (PEG) and sodium citrate was evaluated. Equilibrium data at 25 °C were determined for each system studied using PEG with a molar mass of 1000 and 4000 g mol-1 at pH values of 5.5, 6.5, and 7.5. An increase in the molar mass of the polymer promoted the expansion of the two-phase region and caused the migration of the lactoferrin to the salt-rich bottom phase. An increase in pH also led to the expansion of the biphasic region. However, changing the pH over the tested range slightly affected protein partitioning. Lactoferrin recovery percentages greater than 94% were observed for all of the systems evaluated. The results indicated that lactoferrin can be successfully partitioned in an aqueous two-phase system formed of 14% (w/w) PEG and 10% (w/w) sodium citrate at pH 5.5 and 25 °C. The protein was concentrated 1000-fold in the salt-rich bottom phase in this system. [ABSTRACT FROM AUTHOR]

Nisin is a natural peptide used as a preservative in a variety of food products, in which it inhibits mainly Gram-positive bacterial growth, including multidrug-resistant pathogens. However, its application range depends on the cost-effective production and purification of this molecule. Our group has previously produced nisin by Lactococcus lactis cultivation in milk whey, which is an industrial residue from dairy production. To our knowledge, no report used milk whey as a culture medium, although several investigators have purified nisin using different techniques. We thus aimed to establish a low-cost purification of nisin obtained by this process. Samples were diluted in ammonium sulphate, applied onto HIC columns (butyl sepharose CL 4B matrix), and eluted with Milli-Q water or PBS. Elution fractions were monitored for protein content and nisin antibacterial activity. Water elution resulted in purification factor values (270, commercial nisin; 775, nisin produced in-house) higher than those obtained with PBS elution. We concluded that purification of nisin does not require precipitation with ammonium sulphate, therefore allowing step/cost reduction. Moreover, purification from milk whey using HIC provides nisin with high activity and low salt content, which can further be applied to a variety of areas. [ABSTRACT FROM AUTHOR]

• HPP at 600 MPa for 5 min avoided molds and larvae growth on chestnuts. • The shelf-life of chestnuts treated at 600 MPa was extended in 40 days compared to HT. • Chestnuts treated by HPP preserved better their nutritional composition. • Softer texture and dark color observed on kernel chestnuts processed by HPP. • HPP processed chestnuts could be peeled more quickly and easily. High-pressure processing (HPP) is an emergent technology for nonthermal pasteurization of foods, which here demonstrates the potential to be used by the chestnut industry. This study evaluated HPP as a post-harvest processing technology to control molds and insect larvae proliferation in chestnuts (Castanea sativa Mill.) and improve the fruit's shelf-life. Chestnuts were processed by HPP (400, 500, and 600 MPa for 5.0 min at 20 °C) and the conventional hydrothermal technology (HT, 50 °C for 45 min). Untreated chestnuts were also used as a control group. Shelf-life studies were conducted for 60 d at i) 25 °C and 40 % relative humidity (RH); and ii) 5 °C and 70 % RH. After the treatment and over the storage period, parameters such as color, texture, weight loss, nutritional composition, ascorbic acid, and fungal load were evaluated. The results showed that immediately after the HPP treatments, the chestnuts became slightly softer than HT samples. Fruit treated by HPP maintained their nutritional composition and ascorbic acid content. During the first 30 d of storage, no changes of color were observed in treated fruit. Also, the shelf-life of chestnuts treated at 600 MPa was extended by 40 d, compared to HT, where no molds at a detectable level and insect larvae were observed when stored at 5 °C. This storage condition also reduced the fruit weight losses. Compared with HT, HPP has short processing times, which is an important advantage. In addition, the observed changes of texture as softening and easy peeling can be useful for obtaining ready-to-eat products since chestnuts looked partially cooked. However, its possible application at the industrial level should be adequately investigated based on the promising results obtained. [ABSTRACT FROM AUTHOR]

Phytases are mainly produced by filamentous fungi and have great potential for biotechnological use in animal feed treatment, because this enzyme hydrolyzes ester bonds of the phytic acid releasing inositol and inorganic phosphate. The aim of this work was to evaluate the effect of pH on the production of phytase by Aspergillus japonicus in two different bioreactors, known to have different mixing patterns-stirred tank and air-lift bioreactors. The maximum phytase production-53 U/mL-was obtained at 120 h in the stirred tank while in the air-lift the maximum value was 41 U/mL, observed at 144 h. In fermentations evaluated at controlled pH values (3.5, 6.0, and 7.5), the stirred tank was more efficient for production of phytase than the air-lift. Under these conditions, the highest value was measured at 24 h and pH 3.5. These results were not closely related to fungi particle size, because hyphae with a similar diameter (0.51-0.63 mm) and sphericity (0.78-0.87 mm) secreted different amounts of phytase under the conditions studied. [ABSTRACT FROM AUTHOR]

Highlights: [•] Influence of K L a on xylanase and β-xylosidase productions by Aspergillus niger in STB and ALB. [•] Batch fermentations in STB and ALB under a range of k L a for xylanases production. [•] Comparison of fermentations in STB and ALB for xylanolytic enzymes production. [ABSTRACT FROM AUTHOR]

Abstract: Precipitation processes are widely used in industry for the production of particulate solids. Efficient mixing of the reagents is of major importance for the chemical and physical nature of the synthesized particles. Recently, microreactors have been studied to overcome homogeneity problems found when using stirred tank batch reactors. The present work investigated an ultrasonic tubular microreactor for the continuous-flow precipitation of hydroxyapatite (HAp), both in single-phase flow (SPF) and in gas–liquid flow (GLF). HAp nanoparticles were yielded for both configurations under near-physiological conditions of pH and temperature. The as-prepared particles, especially those that were prepared under GLF, show improved characteristics compared to commercial powder or powder obtained in a stirred tank batch reactor. Primary particles are smaller, particle shape is more homogeneous, and the aggregation degree of the particles is lower. [Copyright &y& Elsevier]

Continuous-flow precipitation ofhydroxyapatite (HAp) was investigatedin a meso oscillatory flow reactor (meso-OFR) and in a scaled-up meso-OFR,obtained by associating in series eight vertical meso-ORFs. Experimentswere carried out under near-physiological conditions of temperatureand pH, using fixed frequency (f= 0.83 Hz) and amplitude(x0= 4.5 mm), and varying the residencetime from 0.4 to 6.7 min. It has been shown that the mean particlesize and the aggregation degree of the prepared HAp particles decreasewith decreasing residence time. HAp nanoparticles with a mean size(d50) of 77 nm, narrow size distribution,and uniform morphology were obtained at the lowest residence times,τ = 0.4 and 3.3 min in the meso-OFR and the scaled-up meso-OFR,respectively. These results show the capability of the meso-OFR andthe scaled-up meso-OFR for continuous production of uniform HAp nanoparticles,while also confirming the possibility of OFR scale-up by in seriesassociation of individual OFRs. [ABSTRACT FROM AUTHOR]

Abstract: Extraction of fibrinolytic protease from Streptomyces sp. DPUA1576 fermentation broth was performed using polyethylene glycol (PEG) – phosphate salts aqueous two phase system (ATPS). The influence of pH, PEG molar mass, PEG and phosphate concentrations on fibrinolytic protease partition coefficient (K) were evaluated by 24 full factorial design. Fibrinolytic protease partitioned preferentially to the (PEG)-rich phase with the highest partition coefficient (K =37.00) obtained in the system 20% (w/w) PEG 1500 (g/mol)-14% (w/w) phosphate at pH 8.0. The system that allowed for the highest extraction consisted of 15% (w/w) PEG 3350-12% (w/w) phosphate, at pH 7.0. In these conditions, a purification factor of 1.51 was obtained for a partition coefficient of 6.41 with the fibrinolytic activity (FA) retained in the top phase. Obtained results confirm the interest of considering ATPS as an alternative extraction method for fibrinolytic protease from Streptomyces sp. DPUA1576. [Copyright &y& Elsevier]

Abstract: This paper describes the continuous-flow precipitation of hydroxyapatite Ca5(PO4)3OH (HAp) in two ultrasonic microreactors using diluted aqueous solutions of calcium and phosphate at 37°C. Precipitation of HAp was first carried out in a tubular microreactor immersed in an ultrasonic bath, where single-phase (laminar) flow and segmented gas–liquid flow were both evaluated. The single-phase flow study was then conducted in a novel microfluidic device developed at MIT. It consists of a Teflon stack microreactor with an integrated piezoelectric element (Teflon microreactor), thereby allowing the direct transmission of ultrasound to the reactor. Both microsystems produce single-phased calcium-deficient carbonated HAp under near-physiological conditions of temperature and pH. In addition, particle aggregation and primary particle size were significantly reduced in the segmented-flow tubular microreactor and in the Teflon microreactor. The as-prepared particles mostly consisted of rod-like shape nanoparticles with dimensions below 100nm in length and around 20nm in width. Further, the microreactors used yielded HAp particles with improved characteristics, namely higher crystallinity and less carbonate contamination, when compared to the HAp particles produced in a stirred tank batch reactor. [Copyright &y& Elsevier]

The impact of the initial dissolved oxygen, fermentation temperature, wort concentration and yeast pitching rate on the major fermentation process responses were evaluated by full factorial design and statistical analysis by JMP 5.01 (SAS software) software. Fermentation trials were carried out in 2L-EBC tall tubes using an industrial lager brewing yeast strain. The yeast viability, ethanol production, apparent extract and real degree of fermentation were monitored. The results obtained demonstrate that very high gravity worts at 22°P can be fermented in the same period of time as a 15°P wort, by raising the temperature to 18°C, the oxygen level to about 22 ppm, and increasing the pitching rate to 22 × 106 cell/mL. When diluting to obtain an 11.5°P beer extract, the volumetric brewing capacity increased 91% for the 22°P wort fermentation and 30% using the 15°P wort. After dilution, the fermentation of the 22°P wort resulted in a beer with higher esters levels, primarily the compound ethyl acetate. [ABSTRACT FROM AUTHOR]

The aim of the present work was to evaluate the use of the kefir grains as a starter culture for tradicional milk kefir beverage and for cheese whey-based beverages production. Fermentation was performed by inoculating kefir grains in milk (ML), cheese whey (CW) and deproteinised cheese whey (DCW). Erlenmeyers containing kefir grains and different substrates were statically incubated for 72 h at 25 °C. Lactose, ethanol, lactic acid, acetic acid, acetaldehyde, ethyl acetate, isoamyl alcohol, isobutanol, 1-propanol, isopentyl alcohol and 1-hexanol were identified and quantified by high-performance liquid chromatography and GC-FID. The results showed that kefir grains were able to utilise lactose in 60 h from ML and 72 h from CW and DCW and produce similar amounts of ethanol (∼12 g L), lactic acid (∼6 g L) and acetic acid (∼1.5 g L) to those obtained during milk fermentation. Based on the chemical characteristics and acceptance in the sensory analysis, the kefir grains showed potential to be used for developing cheese whey-based beverages. [ABSTRACT FROM AUTHOR]

Abstract: Whey valorization concerns have led to recent interest on the production of whey beverage simulating kefir. In this study, the structure and microbiota of Brazilian kefir grains and beverages obtained from milk and whole/deproteinised whey was characterized using microscopy and molecular techniques. The aim was to evaluate its stability and possible shift of probiotic bacteria to the beverages. Fluorescence staining in combination with Confocal Laser Scanning Microscopy showed distribution of yeasts in macro-clusters among the grain’s matrix essentially composed of polysaccharides (kefiran) and bacteria. Denaturing gradient gel electrophoresis displayed communities included yeast affiliated to Kluyveromyces marxianus, Saccharomyces cerevisiae, Kazachatania unispora, bacteria affiliated to Lactobacillus kefiranofaciens subsp. Kefirgranum, Lactobacillus kefiranofaciens subsp. Kefiranofaciens and an uncultured bacterium also related to the genus Lactobacillus. A steady structure and dominant microbiota, including probiotic bacteria, was detected in the analyzed kefir beverages and grains. This robustness is determinant for future implementation of whey-based kefir beverages. [ABSTRACT FROM AUTHOR]

The main goal of this study was to chemically characterize an aqueous S. nigra flower extract and validate it as a bioactive agent. The elderflower aqueous extraction was performed at different temperatures (50, 70 and 90 °C). The extract obtained at 90 °C exhibited the highest phenolic content and antiradical activity. Therefore, this extract was analyzed by GC-MS and HPLC-MS, which allowed the identification of 46 compounds, being quercetin and chlorogenic acid derivatives representative of 86% of the total of phenolic compounds identified in hydrophilic fraction of the aqueous extract. Naringenin (27.2%) was the major compound present in the lipophilic fraction. The antiproliferative effects of the S. nigra extract were evaluated using the colon cancer cell lines RKO, HCT-116, Caco-2 and the extract's antigenotoxic potential was evaluated by the Comet assay in RKO cells. The RKO cells were the most susceptible to S. nigra flower extract (IC50 = 1250 µg mL−1). Moreover, the extract showed antimicrobial activity against Gram-positive bacteria, particularly Staphylococcus aureus and S. epidermidis. These results show that S. nigra-based extracts can be an important dietary source of bioactive phenolic compounds that contribute to health-span improving life quality, demonstrating their potential as nutraceutical, functional foods and/or cosmetic components for therapeutic purposes. [ABSTRACT FROM AUTHOR]

Usually, wine-making by-products are discarded, presenting a significant environmental impact. However, they can be used as a source of bioactive compounds. Moreover, consumers' increasing demand for naturally nutritious and healthy products requires new formulations and food product improvement, together with sustainable, environmentally friendly extraction methods. Thus, this work aimed to compare ohmic heating (OH) with conventional methodology (CONV), using food-grade solvents, mainly water, compared to standard methanol extraction of anthocyanins. No significant differences were found between the CONV and OH for total phenolic compounds, which were 2.84 ± 0.037 and 3.28 ± 0.46 mg/g DW gallic acid equivalent, respectively. The same tendency was found for antioxidant capacity, where CONV and OH presented values of 2.02 ± 0.007 g/100 g and 2.34 ± 0.066 g/100 g ascorbic acid equivalent, respectively. The major anthocyanins identified were malvidin-3-O-acetylglucoside, delphinidin-3-O-glucoside, petunidine-3-O-glucoside, cyanidin-3-O-glucoside, and peonidine-3-O-glucoside. These extracts displayed antimicrobial potential against microorganisms such as Yersinia enterocolitica, Pseudomonas aeruginosa, Salmonella enteritidis, methicillin-sensitive Staphylococcus aureus, a methicillin-resistant Staph. aureus (MRSA), and Bacillus cereus. In conclusion, OH provides similar recovery yields with reduced treatment times, less energy consumption, and no need for organic solvents (green extraction routes). Thus, OH combined with water and citric acid allows a safe anthocyanin extraction from grape by-products, thus avoiding the use of toxic solvents such as methanol, and with high biological potential, including antimicrobial and antioxidant activity. [ABSTRACT FROM AUTHOR]

Coffee-cut stems are a potential fermentable sugars source, which can be upgraded in different value-added products and energy vectors. Nevertheless, there are few reports focused on the acid pretreatment and saccharification processes. Thus, this paper evaluates the effect of the acid pretreatment and saccharification conditions of coffee cut-stems to find the highest sugar yield. Thereafter, the influence of the residence time in the acid pretreatment and the β -glucosidase supplementation in the saccharification process were analyzed. The combined severity factor and crystallinity index were used as metrics to evaluate both processes. In all assays, an increase in the crystallinity index was observed. Furthermore, a nonlinear trend of the combined severity factor respect to the residence time in the acid pretreatment was evidenced. The highest sugar yield was 66.75% with a combined severity factor of 1.84. The better saccharification process was achieved at combined severity factor of 2.01 with a digestibility of 43%. The addition of β-glucosidase in the enzymatic hydrolysis allows increasing the value to 69.07%. Hence, low temperatures, acid concentrations, and the β-glucosidase supplementation allows obtaining a high sugar yield from coffee cut stems. Image 10426913 • Coffee cut-stems are profiled as a potential feedstock in the Colombian context. • Two optimal conditions to pretreat coffee cut-stems are obtained. • A no-linear correlation of the severity factor and residence time was evidenced. [ABSTRACT FROM AUTHOR]

The constant growing demand for vegetable oil for biodiesel and food is raising many environmental concerns about the sustainability of its production based on crops. Oleaginous yeasts show great potential to end with those concerns due to their high lipid productivity in small areas. To evaluate their productivity in lipids, an efficient and reproducible extraction process should be used. As no standard extraction process is available for the extraction of yeast lipids, an optimized extraction process is presented. In this work, the lipids extraction process for the yeasts Rhodotorula glutinis and Lipomyces kononenkoae is optimized using bead beating for cell rupture and introducing adaptations of the two most used extraction methods (Bligh and Dyer and Folch). For Rhodotorula g. the optimum extraction conditions are obtained by the Bligh and Dyer method applying 4.8 cycles of 47 s with 0.7 g of glass beads. For Lipomyces k. the optimum extraction conditions make use of the Folch method applying seven cycles of 42 s with 0.54 g of glass beads. These results reinforce the idea that, for each yeast, different extraction processes may be needed to correctly determine the lipid yield. The extraction procedure was further evaluated with less harmful solvents. Toluene was tested as a possible substitute of chloroform, and ethanol as a possible substitute of methanol. With the optimized extraction process, better results for Lipomyces k. were obtained using toluene and ethanol, while for Rhodotorula g. toluene proved to be a valid substitute of chloroform but ethanol is far less effective than methanol. [ABSTRACT FROM AUTHOR]