Search

Visible light communication is seen as a crucial technology within optical wireless communication systems. The technology of vehicular visible light communication holds significant importance in the context of connected vehicles. This technology can serve as a supplementary solution to vehicular systems that are based on radio frequency. In this paper, the authors conduct an analysis of the performance of both line-of-sight and non-line-ofsight vehicle-to-vehicle visible light communication systems under the effect of artificial light source and weather conditions, including clear, hazy, and foggy weather. A practical vehicular laser diode, a street lamp, and an avalanche photodiode are used to design the proposed system model. Performance enhancement for the proposed system is achieved using an optical amplifier at the receiving end. An artificial light source of light-emitting diode Corn-type is used to represent an ambient artificial light source. Different metrics such as quality factor and bit error rate are used to assess the system performance of the non-lineof-sight-vehicular communication system. The proposed line-of-sight model achieves a data rate of 25 Gbps, supporting a distance of 80 m under clear sky and hazy atmospheric conditions. For foggy weather, an attainable link distance of 70 m is achieved. The achieved results emphasize the suitability of the suggested models for vehicular applications in real world environment. [ABSTRACT FROM AUTHOR]

Vehicular visible light communication is an emerging technology that allows wireless communication between vehicles or between vehicles and infrastructure. In this paper, a vehicular visible light communication system is designed using a non-return to zero on-off keying modulation scheme under the effect of different weather conditions such as clear, haze, and fog. The first model is a light emitting diode-based system and the second is a laser diode-based system. For both models, the influence of system parameters such as beam divergence, transceiver aperture diameters, and receiver responsivity is studied. The impact of the use of the trans-impedance amplifier is also investigated for both models. It was concluded that in the presence of the amplifier, output power of the light emitting diode and laser diode model are increased by 98.46 μW and 0.4719 W, respectively. The performance of the two proposed models is evaluated through bit error rate, quality factor, eye diagram, and output power to have some insightful results about the quality of service for the two proposed models. Under a specific weather condition, the performance of the system would be critical and other techniques should be applied. The maximum achievable link distance for the laser-based and light-emitting diode-based systems is 190 m at a data rate of 25 Gbps and 80 m at a data rate of 60 kbps, respectively, under the same system parameters and weather conditions. The obtained results provide a full idea about the availability of constructing our proposed model in a practical environment, showing a higher performance of the laser diode-based model than that of the light emitting diode-based model. [ABSTRACT FROM AUTHOR]