Search

Hand blockage leads to significant performance impairments at millimeter wave carrier frequencies. A number of prior works have characterized the loss in signal strength with the hand using studies with horn antennas and form-factor user equipments (UEs). However, the impact of the hand on the effective phase response seen by the antenna elements has not been studied so far. Towards this goal, we consider a measurement framework that uses a hand phantom holding the UE in relaxed positions reflective of talk mode, watching videos, and playing games. We first study the impact of blockage on a directional beam steering codebook. The tight phase relationship across antenna elements needed to steer beams leads to a significant performance degradation as the hand surface can distort the observed amplitudes and phases across the antenna elements, which cannot be matched by this codebook. To overcome this loss, we propose a non-directional beamforming codebook made of amplitudes and/or quantized phases with both these quantities estimated as necessary. Theoretical as well as numerical studies show that the proposed codebook can de-randomize the phase distortions induced by the hand and coherently combine the energy across antenna elements and thus help in mitigating hand blockage losses., Comment: 28 pages, 8 figures more...

Blockage by the human hand/body is an important impairment in realizing practical millimeter wave wireless systems. Prior works on blockage modeling are either based on theoretical studies of double knife edge diffraction or its modifications, high-frequency simulations of electromagnetic effects, or measurements with experimental millimeter wave prototypes. While such studies are useful, they do not capture the form-factor constraints of user equipments (UEs). In this work, we study the impact of hand/body blockage with a UE at $28$ GHz built on Qualcomm's millimeter wave modem, antenna modules and beamforming solutions. We report five exhaustive and controlled studies with different types of hand holdings/grips, antenna types, and with directional/narrow beams. For both hard as well as loose hand grips, we report considerably lower blockage loss estimates than prior works. Critical in estimating the loss is the definition of a "region of interest" (RoI) around the UE where the impact of the hand/body is seen. Towards this goal, we define a RoI that includes the spatial area where significant energy is seen in either the no blockage or blockage modes. Our studies show that significant spatial area coverage improvement can be seen with loose hand grip due to hand reflections., Comment: 15 pages, 9 figures, 6 tables more...

The ongoing commercial deployment of millimeter wave systems brings into focus a number of practical issues in form factor user equipment (UE) design. With wavelengths becoming smaller, antenna gain patterns becoming directional, and link budgets critically dependent on beamforming, it becomes imperative to use a number of antenna modules at different locations of the UE for good performance. While more antennas/modules can enhance beamforming array gains, it comes with the tradeoff of higher component cost, power consumption of the associated radio frequency circuitry, and a beam management overhead in learning the appropriate beam weights. Thus, the goal of a good UE design is to provide robust spherical coverage corresponding to good array gains over the entire sphere around the UE with a low beam management overhead, complexity, and cost. The scope of this paper is to study the implications of two popular commercial millimeter wave UE designs (a face and an edge design) on spherical coverage. We show that analog beam codebooks can result in good performance for both the designs, and the edge design provides a better tradeoff in terms of robust performance (with hand blockage), beam management overhead, implementation complexity from an antenna placement standpoint and cost., Comment: 16 pages, 8 figures, 3 tables, Accepted for publication in IEEE Transactions on Communications more...

There has been a growing interest in the commercialization of millimeter wave (mmW) technology as a part of the Fifth-Generation New Radio (5G-NR) wireless standardization efforts. In this direction, many sets of independent measurement campaigns show that wireless propagation at mmW carrier frequencies is only marginally worse than propagation at sub-6 GHz carrier frequencies for small-cell coverage --- one of the most important use-cases for 5G-NR. On the other hand, the biggest determinants of viability of mmW systems in practice are penetration and blockage of mmW signals through different materials in the scattering environment. With this background, the focus of this paper is on understanding the impact of blockage of mmW signals and reduced spatial coverage due to penetration through the human hand, body, vehicles, etc. Leveraging measurements with a 28 GHz mmW experimental prototype and electromagnetic simulation studies, we first propose statistical blockage models to capture the impact of the hand, human body and vehicles. We then study the time-scales at which mmW signals are disrupted by blockage (hand and human body). Our results show that these events can be attributed to physical movements and the time-scales corresponding to blockage are hence on the order of a few 100 ms or more. Building on this fundamental understanding, we finally consider the broader question of robustness of mmW beamforming to handle blockage. Network densification, subarray switching in a user equipment (UE) designed with multiple subarrays, fall back mechanisms such as codebook enhancements and switching to legacy carriers in non-standalone deployments, etc. can address blockage before it leads to a deleterious impact on the mmW link margin., Comment: 28 pages, 6 figures more...

A practical technique is proposed for calibrating single-antenna polarimetric radar systems using a metal sphere plus any second target with a strong cross-polarized radar cross section. This technique assumes perfect isolation between antenna ports. It is shown that all magnitudes and phases (relative to one of the like-polarized linear polarization configurations) of the radar transfer function can be calibrated without knowledge of the scattering matrix of the second target. Comparison of the values measured (using this calibration technique) for a tilted cylinder at X-band with theoretical values shows agreement within + or - 0.3 dB in magnitude and + or - 5 degrees in phase. The radar overall cross-polarization isolation was 25 dB. The technique is particularly useful for calibrating a radar under field conditions, because it does not require the careful alignment of calibration targets. more...