Search

The unprecedented impact of human activity on Earth’s climate and the ongoing increase in global energy demand have made the development of carbon-neutral energy sources ever more important. Hydrogen is an attractive and versatile energy carrier (and important and widely used chemical) obtainable from water through photocatalysis using sunlight, and through electrolysis driven by solar or wind energy1,2. The most efficient solar hydrogen production schemes, which couple solar cells to electrolysis systems, reach solar-to-hydrogen (STH) energy conversion efficiencies of 30% at a laboratory scale3. Photocatalytic water splitting reaches notably lower conversion efficiencies of only around 1%, but the system design is much simpler and cheaper and more amenable to scale-up1,2—provided the moist, stoichiometric hydrogen and oxygen product mixture can be handled safely in a field environment and the hydrogen recovered. Extending our earlier demonstration of a 1-m2 panel reactor system based on a modified, aluminium-doped strontium titanate particulate photocatalyst4, we here report safe operation of a 100-m2 array of panel reactors over several months with autonomous recovery of hydrogen from the moist gas product mixture using a commercial polyimide membrane5. The system, optimized for safety and durability, and remaining undamaged on intentional ignition of recovered hydrogen, reaches a maximum STH of 0.76%. While the hydrogen production is inefficient and energy negative overall, our findings demonstrate that safe, large-scale photocatalytic water splitting, and gas collection and separation are possible. To make the technology economically viable and practically useful, essential next steps are reactor and process optimization to substantially reduce costs and improve STH efficiency, photocatalyst stability and gas separation efficiency. Carbon-neutral hydrogen can be produced through photocatalytic water splitting, as demonstrated here with a 100-m2 array of panel reactors that reaches a maximum conversion efficiency of 0.76%.

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p-n junction to particulate metal selenides to enhance photocatalytic Z-scheme overall water splitting (OWS). The constructed p-n junction of CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 significantly boosted charge separation. A thin TiO2 coating layer also was introduced to inhibit photocorrosion of CdS and suppress the backward reaction of water formation from hydrogen and oxygen. By employing Pt-loaded TiO2/CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 as a hydrogen evolution photocatalyst (HEP), we assembled a Z-scheme OWS system, together with BiVO4:Mo and Au as an oxygen evolution photocatalyst and electron mediator, respectively. An apparent quantum yield of 1.5% at 420 nm was achieved, which is by far the highest among reported particulate photocatalytic Z-scheme OWS systems with metal sulfides/selenides as HEPs. The present work demonstrates that a well-tailored p-n junction structure is effective for promoting charge separation in photocatalysis and opens new pathways for the development of efficient artificial photosynthesis systems involving narrow bandgap photocatalysts.

Gum arabic (GA) is widely used as an emulsion stabilizer and edible coating, and consists of a complex carbohydrate moiety with a rhamnosyl-glucuronate group capping the non-reducing ends. Enzymes that can specifically cleave the glycosidic chains of GA and modify their properties are valuable tools for structural analysis and industrial application. Cryogenic X-ray crystal structure of GA-specific L-rhamnose-α-1,4-D-glucuronate lyase from Fusarium oxysporum (FoRham1), belonging to the polysaccharide lyase (PL) family 42, has been previously reported. To determine the specific reaction mechanism based on its hydrogen-containing enzyme structure, we performed joint X-ray/neutron crystallography of FoRham1. Large crystals were grown in the presence of L-rhamnose (a reaction product), and neutron and X-ray diffraction datasets were collected at room temperature up to 1.80 and 1.25 Å resolutions, respectively. The active site contained L-rhamnose and acetate, the latter being a partial analog of glucuronate. Incomplete H/D exchange between Arg166 and acetate suggested that a strong salt-bridge interaction was maintained. Doubly deuteronated His105 and deuteronated Tyr150 supported this interaction. The unusually hydrogen-rich environment functions as a charge neutralizer for glucuronate and stabilizes the oxyanion intermediate. The NE2 atom of His85 was deprotonated and formed a hydrogen bond with the deuterated O1 hydroxy of L-rhamnose, indicating the function of His85 as the base/acid catalyst for bond cleavage via β-elimination. Asp83 functions as a pivot between the two catalytic histidine residues by bridging them, and this His–His–Asp structural motif is conserved in the three PL families.Significance StatementAlthough hydrogen transfer plays an important role in enzymatic reactions, hydrogen atoms are generally invisible in macromolecular X-ray crystallography. In the reaction of polysaccharide lyases, substrate activation by negative charge stabilization of uronic acid and base/acid-catalyzed β-elimination reaction have been postulated. Here, we report the neutron crystallography of polysaccharide lyase. Joint X-ray/neutron crystallography of L-rhamnose-α-1,4-D-glucuronate lyase from Fusarium oxysporum (FoRham1) complexed with L-rhamnose was performed, and the hydrogen and deuterium atoms were visualized at a high resolution. FoRham1 catalyzes the specific cleavage of the cap structure of gum arabic, which is useful for various applications in the food, cosmetic, and pharmaceutical industries. A detailed catalytic mechanism for FoRham1 was proposed based on the key structural features of its active site.

Tantalum nitride (Ta3N5) is a visible-light-responsive semiconductor that may be capable of achieving the 10% solar-to-hydrogen (STH) efficiency required to allow the commercialization of water splitting systems. However, despite immense research efforts, the highest STH efficiency yet reported for photoanodes based on Ta3N5-nanorods (NRs) is only 2.7%. Therefore, it is imperative to build a theoretical foundation that explains the various loss mechanisms and their correlations with structural and material properties, so as to optimize the performance of this material. The present work devised a detailed numerical model based on an in-depth analysis of the performance characteristics of photoanodes made from either Ba-doped or undoped Ta3N5-NRs. This experimentally calibrated optoelectrical modelling enabled predictions of various factors related to performance loss, including optical effects, charge carrier recombination and resistive loss. Certain physical parameters, such as charge carrier lifetime, diffusion length, hole extraction rate from the NR surfaces to the electrolyte and the series resistance of the photoanode, could also be calculated. The results show that the enhanced performance obtained with Ba doping can be primarily attributed to increases in the carrier lifetime and diffusion length. The present model was recalibrated using experimental data from the literature to examine hidden effects of the NRs’ dimensions on optical and recombination losses. On this basis, various design principles are presented herein that should allow the fabrication of efficient Ta3N5-NRs photoanodes for commercial STH production.

Heterostructure-based photoanodes have been investigated to enhance light absorption and promote the generation and extraction of charge carriers for efficient solar-to-hydrogen energy conversion. ...

Efficient, robust and environmentally friendly cocatalysts for photocatalysts are important for large-scale solar hydrogen production. Herein, we demonstrate that a Rh–Zr mixed oxide is an efficient cocatalyst for hydrogen evolution. Impregnation of Zr and Rh precursors (Zr/Rh = 5 wt/wt%) formed RhZrOx cocatalyst particles on Al-doped SrTiO3, which exhibited 31× higher photocatalytic water-splitting activity than a RhOx cocatalyst. X-ray photoelectron spectroscopy proved that the dissociation of Cl− ions from preformed Rh–Cl–Zr–O solid led to formation of the active phase of RhZrOx, in which the Zr/Rh ratio was critical to high catalytic activity. Additional CoOx loading as an oxygen evolution cocatalyst further improved the activity by 120%, resulting in an apparent quantum yield of 33 (±4)% at 365 nm and a long durability of 60 h. Our discovery could help scale up photocatalytic hydrogen production., An efficient, robust and environmentally friendly Rh–Zr mixed oxide formed though the activation of Rh–Cl–Zr–O solid efficiently functions as a HER cocatalyst on Al-doped SrTiO3.

Recent advances in neutron crystallographic studies have provided structural bases for quantum behaviors of protons observed in enzymatic reactions. Thus, we resolved the neutron crystal structure of a bacterial copper (Cu) amine oxidase (CAO), which contains a prosthetic Cu ion and a protein-derived redox cofactor, topa quinone (TPQ). We solved hitherto unknown structures of the active site, including a keto/enolate equilibrium of the cofactor with a nonplanar quinone ring, unusual proton sharing between the cofactor and the catalytic base, and metal-induced deprotonation of a histidine residue that coordinates to the Cu. Our findings show a refined active-site structure that gives detailed information on the protonation state of dissociable groups, such as the quinone cofactor, which are critical for catalytic reactions.

It is important to improve the apparent quantum yields (AQYs) of narrow bandgap photocatalysts to achieve efficient H2 production. The present work demonstrates a particulate solid solution of zinc selenide and copper gallium selenide (denoted as ZnSe:CGSe) that evolves H2 efficiently and is responsive to visible light up to 725 nm. This material was synthesized using a flux-assisted method and was found to comprise single-crystalline tetrahedral particles. The coloading of Ni and Rh, Pt, Pd or Ru as cocatalysts further improved the photocatalytic H2 evolution rate over this photocatalyst. With the optimal coloading of a Ni–Ru composite cocatalyst, an AQY of 13.7% was obtained at 420 nm during a sacrificial H2 evolution reaction, representing the highest value yet reported for a photocatalyst with an absorption edge longer than 700 nm. The present study demonstrates that the preparation of single-crystalline particles and the rational assembly of composite cocatalysts are effective strategies that allow the efficient utilization of long wavelengths by metal selenide photocatalysts for solar fuel production., Coloading of a Ni–Ru composite cocatalyst on a 700 nm-class single-crystalline particulate selenide photocatalyst improves its hydrogen evolution activity.

Photoelectrochemical (PEC) water splitting using visible-light-responsive photoelectrodes is the preferred approach to converting solar energy into hydrogen as a renewable energy source. A transparent Ta3 N5 photoanode embedded within a PEC cell having a tandem configuration is a promising configuration that may provide a high solar-to-hydrogen energy conversion efficiency. Ta3 N5 thin films are typically prepared by heating precursor films in an NH3 flow at high temperatures, which tends to degrade the transparent conductive layer, such that producing efficient Ta3 N5 transparent photoanodes is challenging. Herein, the direct preparation of transparent Ta3 N5 photoanodes on insulating quartz substrates was demonstrated without the insertion of a transparent conductive layer. The resulting devices generated a photocurrent of 6.0 mA cm-2 at 1.23 V vs. a reversible hydrogen electrode under simulated sunlight. This study provides a new strategy for the preparation of transparent photoelectrodes that mitigates current challenges.

Control over the composition and nanostructure of solid electrocatalysts is quite important for drastic improvement of their performance. The cation exchange reaction of nanocrystals (NCs) has been reported as the way to provide metastable crystal structures and complicated functional nanostructures that are not accessible by conventional synthetic methods. Herein we demonstrate the cation exchange-derived formation of metastable spinel Ni3Se4 NCs (sp-Ni3Se4) and phase segregated berzelianite Cu2−xSe (ber-Cu2−xSe)/sp-Ni3Se4 heterostructured NCs as active oxygen evolution reaction (OER) catalysts. A rare sp-Ni3Se4 phase was formed by cation exchange of ber-Cu2−xSe NCs with Ni2+ ions, because both phases have the face-centered cubic (fcc) Se anion sublattice. Tuning the Ni : Cu molar ratio leads to the formation of Janus-type ber-Cu2−xSe/sp-Ni3Se4 heterostructured NCs. The NCs of sp-Ni3Se4 and ber-Cu2−xSe/sp-Ni3Se4 heterostructures exhibited high catalytic activities in the OER with small overpotentials of 250 and 230 mV at 10 mA cm−2 in 0.1 M KOH, respectively. They were electrochemically oxidized during the OER to give hydroxides as the real active species. We anticipate that the cation exchange reaction could have enormous potential for the creation of novel heterostructured NCs showing superior catalytic performance.

A new route for the preparation of tantalum nitride (Ta3N5) thin films for photoelectrochemical (PEC) applications was demonstrated, based on plasma-enhanced chemical vapor deposition (PCVD). Ta3N5 was produced on a Ta foil substrate using PCVD with a Ta precursor, followed by NH3 nitridation at high temperatures. Various characterization techniques were used to assess the properties of the resulting films, including X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, cross-sectional scanning transmission electron microscopy with elemental mapping, cross-sectional high resolution transmission electron spectroscopy, and X-ray photoelectron spectroscopy. This PCVD technique formed an amorphous phase that was converted into a multilayer structure having the composition TaOx/Ta3N5/Ta3N5 + Ta2N/Ta during nitridation. Photoelectrochemical (PEC) trials assessing the progress of the oxygen evolution reaction showed a high photocurrent density of 8.1 mA cm−2 at 1.23 V vs. RHE under simulated solar radiation. This represents one of the highest values ever reported for Ta3N5 without further modification or the addition of a surface layer. The incident photon-to-current efficiency of this specimen reached a maximum of 67% at 500 nm and the device was stable for up to 60 min. The superior PEC performance obtained in this work is attributed to the formation of a highly crystalline, compact and uniform Ta3N5 + Ta2N layer.

CuInS2 photocathodes were prepared and surface modified for photoelectrochemical hydrogen production in a neutral potassium phosphate electrolyte. This work represents the first-ever demonstration that Ni-MoSx provides better catalytic activity than Pt as a hydrogen evolution reaction catalyst on the CuInS2 surface, likely due to the junction formed between the CuInS2 and Ni-MoSx layers.

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p

The IBARAKI biological crystal diffractometer (iBIX) was used in single-crystal time-of-flight neutron diffraction experiments on manganese catalase from Thermus thermophilus. The unit-cell dimensions were 133 × 133 × 133 Å, which is close to the designed maximum limitation of iBIX (135 × 135 × 135 Å). The optimum integration box sizes were set and the degree of integration box overlap was calculated for each Laue spot. Using the overlap ratio as the criterion, the selection of the diffraction intensity data was performed to give a minimum R p.i.m.. Subsequently, diffraction intensity data from Laue spots with overlap ratios ≤0.1 were selected and a complete reflection data set with d min = 2.35 Å was obtained. Joint X-ray and neutron structure refinements were also successfully performed. It was difficult to determine the structures and protonation states of all the oxygen atoms in the manganese cluster owing to the disordered structure. No hydrogen atom was observed on the ordered μ-bridging oxygen atom O1003. Instead, this oxygen atom probably forms a hydrogen bond with Thr39. In addition, the refinements clearly showed the protonation states of the amino acid residues and hydrogen bonds, as observed in Tyr192, Glu167 and Glu280. This first neutron crystal structure of manganese catalase shows that iBIX can provide acceptable diffraction data for neutron single-crystal analyses of at least 2.4 Å resolution within the original targeted unit-cell dimensions of 135 × 135 × 135 Å.

Oxysulfide semiconductors have narrow bandgaps suitable for water splitting under visible-light irradiation, because the electronegative sulfide ions negatively shift the valence band edges of the corresponding oxides1,2. However, the instability of sulfide ions during the water oxidation is a critical obstacle to simultaneous evolution of hydrogen and oxygen3. Here, we demonstrate the activation and stabilization of Y2Ti2O5S2, with a bandgap of 1.9 eV, as a photocatalyst for overall water splitting. On loading of IrO2 and Rh/Cr2O3 as oxygen and hydrogen evolution co-catalysts, respectively, and fine-tuning of the reaction conditions, simultaneous production of stoichiometric amounts of hydrogen and oxygen was achieved on Y2Ti2O5S2 during a 20 h reaction. The discovery of the overall water splitting capabilities of Y2Ti2O5S2 extends the range of promising materials for solar hydrogen production. The instability of sulfide ions during water oxidation prevents simultaneous evolution of hydrogen and oxygen. An oxysulfide semiconductor photocatalyst, Y2Ti2O5S2, is shown to evolve H2 and O2 via a water-splitting reaction under visible-light irradiation.

High-quality needle-like crystals of La5Ti2CuS5O7 (a ternary transition-metallic oxysulfide) as long as 1 mm and a few μm in diameter were grown in CsCl molten-salt flux. This synthesis process was performed in a Bridgman furnace with slow motion of charge across the heating zone. Transmission electron microscopy/diffraction analysis indicated that they are product crystallites without crystalline intergrowth, and that the longitudinal direction of needle crystals is parallel to crystallographic b axis of La5Ti2CuS5O7. Optical polarized ultraviolet–visible reflectance spectroscopy provided the first experimental evidence of the one-dimensional electronic excitation along the b axis of this material. The spectroscopic peaks are assigned to the transitions between the electronic bands aided by numerical calculations on the basis of density functional theory (DFT). The advantages of this synthetic process will be applicable in general for oxysulfides that are useful as optical and photocatalytic materials.

Photoelectrochemical water splitting is regarded as a promising approach to the production of hydrogen, and the development of efficient photoelectrodes is one aspect of realizing practical systems. In this work, transparent Ta3 N5 photoanodes were fabricated on n-type GaN/sapphire substrates to promote O2 evolution in tandem with a photocathode, to realize overall water splitting. Following the incorporation of an underlying GaN layer, a photocurrent of 6.3 mA cm-2 was achieved at 1.23 V vs. a reversible hydrogen electrode. The transparency of Ta3 N5 to wavelengths longer than 600 nm allowed incoming solar light to be transmitted to a CuInSe2 (CIS), which absorbs up to 1100 nm. A stand-alone tandem cell with a serially-connected dual-CIS unit terminated with a Pt/Ni electrode was thus constructed for H2 evolution. This tandem cell exhibited a solar-to-hydrogen energy conversion efficiency greater than 7 % at the initial stage of the reaction.

Photocatalytic water splitting is a viable approach to the large-scale production of renewable solar hydrogen. The apparent quantum yield for this reaction has been improved, but the lifespan of photocatalysts functioning under sunlight at ambient pressure have rarely been examined, despite the critical importance of this factor in practical applications. Herein, we show that Al-doped SrTiO3 (SrTiO3:Al) loaded with a RhCrOx (rhodium chromium oxide) cocatalyst splits water with an apparent quantum yield greater than 50% at 365 nm. Moreover, following the photodeposition of CoOOH and TiO2, this material maintains 80% of its initial activity and a solar-to-hydrogen energy conversion efficiency greater than or equal to 0.3% over a span of 1300 h under constant illumination by simulated sunlight at ambient pressure. This result is attributed to reduced dissolution of Cr in the cocatalyst following the oxidative photodeposition of CoOOH. The photodeposition of TiO2 further improves the durability of this photocatalyst. This work demonstrates a concept that could allow the design of long-term, large-scale photocatalyst systems for practical sunlight-driven water splitting.

A thin film of (CuInS2)x(ZnS)1−x has been developed as a photocathode for solar water splitting for the first time. A superior photoelectrochemical performance has been achieved, mainly attributed to the formation of a solid solution by CuInS2 and ZnS, which proved to be an effective strategy to improve the onset potential and efficiency of CuInS2 photocathodes.

SrTiO3 (STO) has favorable opto-electronic properties for overall water splitting. Nevertheless, realizing a higher efficiency is impeded by its band gap which can only harvest UV light. In order to extend the spectral response towards visible light, STO is (co)doped with lanthanum (La) and rhodium (Rh). However, notwithstanding the amount of visible light absorbed, the H2 evolution rates are remarkably governed by the valence state of Rh, La doping level and ruthenium (Ru) cocatalyst loading. Hence, it is essential to unravel the underlying effect of doping on the photophysical processes to gain insight into material design. To this end, charge carrier dynamics was probed over a wide time (sub-picosecond to microsecond) and spectral (visible to IR) region using transient absorption spectroscopy. Depending on the dopant composition, an interplay between the electron trapping and the kinetics of the electron transfer to the Ru cocatalyst was rationalized. For Rh4+:STO, free electrons probed at 3435 nm decayed virtually completely by 20 ps resulting in a kinetic competition between the electron trapping and the electron transfer to Ru cocatalyst. In the case of Rh3+:STO, free electrons decayed by a factor of three by 100 ps, thus demonstrating the effect of Rh valence state on the electron lifetime. The time constant and quantum yield of electron transfer from Rh3+:STO to the Ru cocatalyst were found to be 1.6 ps and 14.7%, respectively. In addition to a longer electron lifetime, enhanced electron transfer to the Ru cocatalyst makes Rh3+:STO one of the promising photocatalysts for H2 generation. Engineering the energetic position of the dopant within the band gap to avoid undesirable carrier trapping is crucial to enhance the efficiency of photocatalytic reactions.

Control over the composition and nanostructure of solid electrocatalysts is quite important for drastic improvement of their performance. The cation exchange reaction of nanocrystals (NCs) has been reported as the way to provide metastable crystal structures and complicated functional nanostructures that are not accessible by conventional synthetic methods. Herein we demonstrate the cation exchange-derived formation of metastable spinel Ni3Se4 NCs (sp-Ni3Se4) and phase segregated berzelianite Cu2−xSe (ber-Cu2−xSe)/sp-Ni3Se4 heterostructured NCs as active oxygen evolution reaction (OER) catalysts. A rare sp-Ni3Se4 phase was formed by cation exchange of ber-Cu2−xSe NCs with Ni2+ ions, because both phases have the face-centered cubic (fcc) Se anion sublattice. Tuning the Ni : Cu molar ratio leads to the formation of Janus-type ber-Cu2−xSe/sp-Ni3Se4 heterostructured NCs. The NCs of sp-Ni3Se4 and ber-Cu2−xSe/sp-Ni3Se4 heterostructures exhibited high catalytic activities in the OER with small overpotentials of 250 and 230 mV at 10 mA cm−2 in 0.1 M KOH, respectively. They were electrochemically oxidized during the OER to give hydroxides as the real active species. We anticipate that the cation exchange reaction could have enormous potential for the creation of novel heterostructured NCs showing superior catalytic performance., Bimetallic selenide nanocrystals formed by cation exchange reaction work as a precursor of efficient water oxidation electrocatalyst.

The unprecedented impact of human activity on Earth's climate and the ongoing increase in global energy demand have made the development of carbon-neutral energy sources ever more important. Hydrogen is an attractive and versatile energy carrier (and important and widely used chemical) obtainable from water through photocatalysis using sunlight, and through electrolysis driven by solar or wind energy

Sunlight-driven water splitting systems operating under ambient pressure are essential for practical renewable hydrogen production. Printable photocatalyst sheets, composed of a hydrogen evolution photocatalyst (HEP), an oxygen evolution photocatalyst (OEP), and conductive metal nanoparticles, are cost-effective and scalable systems. However, the decrease in water splitting activity under ambient pressure due to reverse reactions hampers their practical application. In this study, coating zirconium oxide (ZrOx ) by facile drop-casting onto a printed photocatalyst sheet, which consists of SrTiO3 : Rh, BiVO4 : Mo, and Au nanocolloids as the HEP, OEP, and electron mediator, respectively, effectively maintains the water splitting activity at elevated pressure. The ZrOx -coated photocatalyst sheet retains 90 % and 84 % of the base performance (the pristine sheet at 10 kPa) at 50 and 90 kPa, respectively. Achieving efficient water splitting at the ambient pressure by inexpensive and extensible processes is an important step toward solar hydrogen production.

Transthyretin (TTR) is one of more than 30 amyloidogenic proteins, and the amyloid fibrils found in patients afflicted with ATTR amyloidosis are composed of this protein. Wild-type TTR amyloids accumulate in the heart in senile systemic amyloidosis (SSA). ATTR amyloidosis occurs at a much younger age than SSA, and the affected individuals carry a TTR mutant. The naturally occurring amyloidogenic Y116S TTR variant forms more amyloid fibrils than wild-type TTR. Thus, the Y116S mutation reduces the stability of the TTR structure. A neutron diffraction experiment on Y116S TTR was performed to elucidate the mechanism of the changes in structural stability between Y116S variant and wild-type TTR through structural comparison. Large crystals of the Y116S variant were grown under optimal crystallization conditions, and a single 2.4 mm3crystal was ultimately obtained. This crystal was subjected to time-of-flight (TOF) neutron diffraction using the IBARAKI biological crystal diffractometer (iBIX) at the Japan Proton Accelerator Research Complex, Tokai, Japan (J-PARC). A full data set for neutron structure analysis was obtained in 14 days at an operational accelerator power of 500 kW. A new integration method was developed and showed improved data statistics; the new method was applied to the reduction of the TOF diffraction data from the Y116S variant. Data reduction was completed and the integrated intensities of the Bragg reflections were obtained at 1.9 Å resolution for structure refinement. Moreover, X-ray diffraction data at 1.4 Å resolution were obtained for joint neutron–X-ray refinement.

Photoelectrochemical (PEC) water splitting using visible-light-responsive photoelectrodes is the preferred approach to converting solar energy into hydrogen as a renewable energy source. A transparent Ta

The IBARAKI Biological Crystal Diffractometer (iBIX) has been available for use at MLF (Material and Life Science Facility) in J-PARC (Japan Proton Accelerator Research Complex) since 2008. The development in state-of-the-art detector systems could enable iBIX to become one of the highest-performance neutron single-crystal diffractometers in the world. Here, together with other various developments, such as data reduction software, crystal growth, and new techniques in measurement coupled analysis, we provided new hydrogen and water structural data of several proteins and macromolecules. Although the proton power at MLF has not yet reached its planned maximum (1MW), a more powerful neutron source will be soon needed for neutron protein crystallography. A future idea is also proposed and discussed in this article.

Summary Efficient and scalable sunlight-driven water-splitting systems are essential for practical renewable hydrogen production. Particulate photocatalyst sheets for Z-scheme water splitting can be printed at low cost using inks containing a hydrogen evolution photocatalyst (HEP), an oxygen evolution photocatalyst (OEP), and conductive metal nanoparticles, and can be applied to large areas. However, the metal nanoparticles lead to backward reactions and light absorption. Herein, we demonstrate printable photocatalyst sheets composed of SrTiO3:La,Rh as the HEP, BiVO4:Mo as the OEP, and nanoparticulate indium tin oxide as a transparent and electrochemically inert conductor, for efficient pure-water splitting. The photocatalyst sheets decompose water with a solar-to-hydrogen energy conversion efficiency of 0.4%, which is one of the highest values among Z-scheme overall water-splitting systems prepared without the requirement for a vacuum process. Printable and efficient photocatalyst sheets obtained using cost-effective and readily extensible procedures spread opportunities toward practical solar hydrogen production via the water-splitting reaction.

In this article, the status of the STARGazer data-processing software and its data-processing algorithms are described in detail. The STARGazer data-processing software is used for neutron time-of-flight single-crystal diffraction data collected using the IBARAKI Biological Crystal Diffractometer., The STARGazer data-processing software is used for neutron time-of-flight (TOF) single-crystal diffraction data collected using the IBARAKI Biological Crystal Diffractometer (iBIX) at the Japan Proton Accelerator Research Complex (J-PARC). This software creates hkl intensity data from three-dimensional (x, y, TOF) diffraction data. STARGazer is composed of a data-processing component and a data-visualization component. The former is used to calculate the hkl intensity data. The latter displays the three-dimensional diffraction data with searched or predicted peak positions and is used to determine and confirm integration regions. STARGazer has been developed to make it easier to use and to obtain more accurate intensity data. For example, a profile-fitting method for peak integration was developed and the data statistics were improved. STARGazer and its manual, containing installation and data-processing components, have been prepared and provided to iBIX users. This article describes the status of the STARGazer data-processing software and its data-processing algorithms.

Solar energy is a natural and effectively permanent resource and so the conversion of solar radiation into chemical or electrical energy is an attractive, although challenging, prospect. Photo-electrochemical (PEC) water splitting is a key aspect of producing hydrogen from solar power. However, practical water oxidation over photoanodes (in combination with water reduction at a photocathode) in PEC cells is currently difficult to achieve because of the large overpotentials in the reaction kinetics and the inefficient photoactivity of the semiconductors. The development of semiconductors that allow high solar-to-hydrogen conversion efficiencies and the utilization of these materials in photoanodes will be a necessary aspect of achieving efficient, stable water oxidation. This Review discusses advances in water oxidation activity over photoanodes of n-type visible-light-responsive (oxy)nitrides and oxides.