Search

MS-275, a histone deacetylase inhibitor, has proven anticancer activities against various malignancies. However, its clinical application has been constrained by dose-limiting toxicity, off-target effects, and variable clinical outcomes. Clinical data suggest that sustained low MS-275 doses could achieve a more selective and consistent effect. This study aimed at enhancing the anticancer activity of MS-275 by encapsulating it in D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) micelles. The produced nanoformulations were characterized by their low polydispersity (0.201), negative zeta potential (−0.397 mV), and high entrapment efficiency (98.8%). Experimental evaluation of the formulation showed a significant reduction in HepG2, HCT116, and MCF7 cells’ viability, associated with enhanced apoptosis at a lower IC50 compared to MS-275 alone. The formulation was further examined on cancer cells xenografted on the chorioallantoic membrane (CAM) of chick embryos. The results showed a substantial reduction in tumor size. TPGS micelles alone induced an accumulation in G1 and slightly reduced the cellular viability of the examined cell lines. Our results suggest that encapsulating MS-275 in TPGS micelles represents a promising strategy to enhance MS-275 therapeutic impact while minimizing its pharmacological dosage.

In the original publication [...]

Perillyl alcohol (PA), a naturally existing monocyclic terpene related to limonene, is characterized by its poor aqueous solubility and very limited bioavailability. Its potential anti-cancer activity against malignant glioma has been reported. The aim was to develop PA-loaded lipid-based nanocarriers (LNCs), and to investigate their anti-cancer activity against two different brain cell lines. Non-medicated and PA-loaded LNCs were prepared and characterized. The mechanism of cytotoxic activity of PA was conducted using a molecular docking technique. The cell viabilities against A172 and ANGM-CSS cells were evaluated. The results revealed that the average particle size of the prepared LNCs ranged from 248.67 ± 12.42 to 1124.21 ± 12.77 nm, the polydispersity index was 0.418 ± 0.043–0.509 ± 0.064, while the zeta potential ranged from −36.91 ± 1.31 to −15.20 ± 0.96 mV. The molecular docking studies demonstrated that the drug had binding activity to human farnesyltransferase. Following exposure of the two glioblastoma cell lines to the PA-loaded nanoformulations, MTS assays were carried out, and the data showed a far lower half-maximal inhibitory concentration in both cell lines when compared to pure drug and non-medicated nanocarriers. These results indicate the potential in vitro antiproliferative activity of PA-loaded LNCs. Therefore, the prepared PA-loaded nanocarriers could be used to enhance drug delivery across the blood–brain barrier (BBB) in order to treat brain cancer, especially when formulated in a suitable dosage form. The size, surface charge, and lipid composition of the LNCs make them promising for drug delivery across the BBB. Detailed pharmacokinetic and pharmacodynamic assessments, including the evaluation of BBB penetration, are necessary to better understand the compound’s distribution and effects within the brain.

The synthetic allosteric effector of hemoglobin, TD-7 has been investigated as a potential therapeutic agent for the treatment of sickle cell disease. The pharmacologic activity of TD-7 is due to formation of a Schiff-base interaction between its aldehyde group and the two N-terminal αVal1 amines of hemoglobin, effectively inhibiting sickling of red blood cells. However, TD-7 faces a challenge in terms of poor oral bioavailability due to rapid in-vivo oxidative metabolism of its aldehyde functional group. To address this shortcoming, researches have explored the use of a L-cysteine ethyl ester group to cap the aldehyde group to form a thiazolidine aromatic aldehyde prodrug complex, resulting in the improvement of the metabolic stability of this class of compounds. This report details the synthesis of a thiazolidine prodrug of TD-7, referred to as Pro-7, along with a comprehensive investigation of Pro-7 functional and biological properties. In an in-vitro Hb modification and Hb oxygen affinity studies using normal whole blood, as well as erythrocyte sickling inhibition using sickle whole blood, Pro-7 exhibited a gradual onset but progressive increase in all activities. Additionally, in-vivo pharmacokinetic studies conducted with Sprague Dawley rats demonstrated that Pro-7 can undergo hydrolysis to release TD-7. However, the blood concentration of TD-7 did not reach the desired therapeutic level. These findings suggest that the incorporation of the L-cysteine ethyl ester group to TD-7 represents a promising strategy to enhance the metabolic stability of aromatic aldehydes that could lead to the development of a more effective drug for the treatment of sickle cell disease.

6-Mercaptopurine (6-MP) is a chemotherapeutic agent with inadequate efficacy due to its poor aqueous solubility and limited bioavailability. Turmeric oil is a naturally occurring bioactive substance obtained from the rhizomes of Curcuma longa Linn that has well-known antiproliferative activities. The aim of this study was to develop a 6-MP-loaded turmeric oil-based self-nanoemulsifying drug delivery system (SNEDDS) to improve the anticancer activity of 6-MP. Turmeric oil was extracted and used in a range of 15–25% to develop SNEDDS formulations utilizing tween 80 and dimethyl sulfoxide as the surfactant and cosurfactant, respectively. The size, charge, and effect of the formulations on the viability against HepG2 and MCF-7 cell models, as well as the apoptosis and cell cycle, were analyzed. The prepared SNEDDS formulations were in the size range of 425.7 ± 7.4–303.6 ± 19.3 nm, using a polydispersity index of 0.429–0.692 and electronegative surface charges. Moreover, 6-MP-loaded SNEDDS with 15% turmeric oil content (F1) showed smaller particle sizes and a noticeable antiproliferative activity against both cell line models. Also, F1 showed a higher rate of late apoptosis than the pure drug and the corresponding non-medicated formulation. A morphological study revealed significant changes in the HepG2 cells compared to untreated cells. More cells halted in the S phase, and a marked decrease in the proportions of cells in the G1/G0 phase was observed when using SNEDDS formulation compared to pure drug. Thus, SNEDDS formulation is a promising drug delivery system for improving the antiproliferative activity of 6-MP, especially when turmeric oil is incorporated.

Abstract Background Rosuvastatin (RSV) is a poorly water-soluble drug that has an absolute oral bioavailability of only 20%. The aim of this work was to prepare a positively charged chitosan coated flexible lipid-based vesicles (chitosomes) and compare their characteristics to the corresponding negatively charged flexible liposomal nanoparticles (NPs) in order to develop new RSV nanocarrier systems. Methods Three formulation factors affecting the development of chitosomes nano-formulation were optimized for their effects on the particles size, entrapment efficiency (EE) and zeta potential. The optimized flexible chitosomes and their corresponding liposomal NPs were characterized for morphology, in vitro release, flexibility and intestinal cell viability. The half maximum inhibitory concentrations (IC50) for both formulations were calculated. Results The drug to lipid molar ratio, edge activator percent and the chitosan concentration were significantly affecting the characteristics of NPs. The optimized chitosomes nano-formulation exhibited larger size, higher EE and greater zeta potential value when compared to the corresponding liposomal NPs. Both formulations showed a spherical shape nanostructure with a marked outer shell for the chitosomes nano-formulation. Chitosomes illustrated an extended drug release profile when compared with the corresponding liposomal NPs and the prepared drug suspension. Flexibility of both vesicles was confirmed with superiority of liposomal NPs over chitosomes. RSV loaded chitosomes nano-formulation exhibited lower IC50 values and higher therapeutic window while liposomal NPs were compatible with the intestinal cells. Conclusions RSV loaded chitosomes nano-formulation could be considered as a promising nanocarrier system with a marked cytotoxic activity while, RSV loaded liposomal NPs are suitable nanocarrier to improve RSV activity in treatment of cardiovascular disorders.

The development of an oral anti-diabetic medication characterized by enhanced hypoglycemic activity is in high demand. The goal was to study the hypoglycemic activity and pancreatic histopathology after the black-seed-based self-nanoemulsifying drug delivery system (SNEDDS) loaded with glimepiride liquisolid tablets to diabetic rats. The solubility of glimepiride in various vehicles was investigated. An optimization SNEDDS formulation was developed using a mixture of the experimental design approach. Box–Behnken design (BBD) was used to develop glimepiride liquisolid tablets utilizing Avicel PH 101 and Neusilin as a carrier mixture and FujiSil as a coating material. The quality attributes of the prepared tablets were assessed. Following the administration of the optimized tablets to diabetic rats, the pharmacodynamics and histopathological changes were investigated and compared to a commercial drug product. Results revealed that the optimized SNEDDS formulation that contains 15.43% w/w black seed oil, 40% w/w Tween 80, and 44.57% w/w Polyethylene glycol 400 showed an average droplet size of 34.64 ± 2.01 nm and a drug load of 36.67 ± 3.13 mg/mL. The optimized tablet formulation contained 0.31% Avicel in the carrier mixture, a 14.99 excipient ratio, and 8% superdisintegrant. Pre- and post-compression properties were satisfactory, and the optimized glimepiride liquisolid tablet showed a two-fold increase in dissolution. The optimized tablet demonstrated superior pharmacodynamics. The pancreatic tissues of the group treated with the optimized tablet displayed normal histological structure. The obtained data offered a commercially viable alternative for manufacturing solid dosage forms containing water-insoluble drugs, but additional clinical research is required.

6-Mercaptopurine (6-MP) is a well-known immunosuppressive medication with proven anti-proliferative activities. 6-MP possesses incomplete and highly variable oral absorption due to its poor water solubility, which might reduce its anti-cancer properties. To overcome these negative effects, we developed neutral and positively charged drug-loaded liposomal formulations utilizing the thin-film hydration technique. The prepared liposomal formulations were characterized for their size, polydispersity index (PDI), zeta potential, and entrapment efficiency. The average size of the prepared liposomes was between 574.67 ± 37.29 and 660.47 ± 44.32 nm. Positively charged liposomes (F1 and F3) exhibited a lower PDI than the corresponding neutrally charged ones (F2 and F4). Entrapment efficiency was higher in the neutral liposomes when compared to the charged formulation. F1 showed the lowest IC50 against HepG2, HCT116, and MCF-7 cancer cells. HepG2 cells treated with F1 showed the highest level of inhibition of cell proliferation with no evidence of apoptosis. Cell cycle analysis showed an increase in the G1/G0 and S phases, along with a decrease in the G2/M phases in the cell lines treated with drug loaded positively charged liposomes when compared to free positive liposomes, indicating arrest of cells in the S phase due to the stoppage of priming and DNA synthesis outside the mitotic phase. As a result, liposomes could be considered as an effective drug delivery system for treatment of a variety of cancers; they provide a chance that a nanoformulation of 6-MP will boost the cytotoxicity of the drug in a small pharmacological dose which provides a dosage advantage.

Vasodilators are an important class of antihypertensive agents. However, they have limited clinical use due to the reflex tachycardia associated with their use which masks most of its antihypertensive effect and raises cardiac risk. Chemical investigation of Psiadia punctulata afforded five major methoxylated flavonoids (1–5) three of which (1, 4, and 5) showed vasodilator activity. Linoleic acid-based self-nanoemulsifying drug delivery system (SNEDDS) was utilized to develop intravenous (IV) formulations that contain compounds 1, 4, or 5. The antihypertensive effect of the prepared SNEDDS formulations, loaded with each of the vasodilator compounds, was tested in the angiotensin-induced rat model of hypertension. Rats were subjected to real-time recording of blood hemodynamics and surface Electrocardiogram (ECG) while the pharmaceutical formulations were individually slowly injected in cumulative doses. Among the tested formulations, only that contains umuhengerin (1) and 5,3′-dihydroxy-6,7,4′,5′-tetramethoxyflavone (5) showed potent antihypertensive effects. Low IV doses, from the prepared SNEDDS, containing either compound 1 or 5 showed a marked reduction in the elevated systolic blood pressure by 10 mmHg at 12 μg/kg and by more than 20 mmHg at 36 μg/kg. The developed SNEDDS formulation containing either compound 1 or 5 significantly reduced the elevated diastolic, pulse pressure, dicrotic notch pressure, and the systolic–dicrotic notch pressure difference. Moreover, both formulations decreased the ejection duration and increased the non-ejection duration while they did not affect the time to peak. Both formulations did not affect the AV conduction as appear from the lack of effect on p duration and PR intervals. Similarly, they did not affect the ventricular repolarization as no effect on QTc or JT interval. Both formulations decreased the R wave amplitude but increased the T wave amplitude. In conclusion, the careful selection of linoleic acid for the development of SNEDDS formulation rescues the vasodilating effect of P. punctulata compounds from being masked by the reflex tachycardia that is commonly associated with the decrease in peripheral resistance by most vasodilators. The prepared SNEDDS formulation could be suggested as an effective medication in the treatment of hypertensive emergencies, after clinical evaluation.

Dapoxetine (DPX) is an orally administered drug for the treatment of premature ejaculation (PE). One of the challenges of administering DPX orally as a tablet is its poor bioavailability (ie, 42%) due to extensive first-pass metabolism. Thus, it is vital to develop a new formulation and mode of delivery to achieve the unmet needs of PE treatment. In this study, an optimized DPX polymeric nanoparticle (PNP) was developed and subsequently loaded into a transdermal film. The Box–Behnken design was utilized to optimize 3 formulation factors affecting the particle size and entrapment efficiency (EE) of chitosan (CS)-alginate (ALG) PNPs. A 3-level factorial design was used to study the effect of 2 variables affecting DPX cumulative percent released and percent elongation from transdermal films loaded with DPX-PNPs. Permeation parameters were calculated following ex vivo permeation study through rat skin. Transport of the PNPs across the skin layers was investigated using a fluorescence laser microscope. Results revealed that an optimized PNPs formulation was developed with a particle size 415.94 nm and EE 37.31%. Dapoxetine was successfully entrapped in the polymeric matrix. Chitosan and ALG interacted electrostatically with the studied cross-linking agents to form a polyelectrolyte complex. The ex vivo study illustrated a sustained release profile of DPX with enhanced skin permeation from the film loaded PNPs. Moreover, the PNPs was able to penetrate deeper into skin layers. Therefore, DPX transdermal film developed in this work could be considered as a successful drug delivery with better patient compliance for the treatment of PE.

Glimepiride is characterized by an inconsistent dissolution and absorption profile due to its limited aqueous solubility. The aim of this study was to develop glimepiride tablets using three different manufacturing techniques, as well as to study their quality attributes and pharmacokinetics behavior. Black seed oil based self-nanoemulsifying drug delivery system (SNEDDS) formulation was developed and characterized. Glimepiride liquisolid and directly compressed tablets were prepared and their pre-compression and post-compression characteristics were evaluated. Semi-solid pastes loaded with SNEDDS were prepared and used to develop three-dimensional printing tablets utilizing the extrusion technique. In vivo comparative pharmacokinetics study was conducted on Male Wistar rats using a single dose one-period parallel design. The developed SNEDDS formulation showed a particle size of 45.607 ± 4.404 nm, and a glimepiride solubility of 25.002 ± 0.273 mg/mL. All the studied tablet formulations showed acceptable pre-compression and post-compression characteristics and a difference in their in vitro drug release behavior. The surface of the liquisolid and directly compressed tablets was smooth and non-porous, while the three-dimensional printing tablets showed a few porous surfaces. The inner structure of the liquisolid tablets showed some cracks and voids between the incorporated tablet ingredients while that of the three-dimensional printing tablets displayed some tortuosity and a gel porous-like structure. Most of the computed pharmacokinetic parameters improved with the liquisolid and three-dimensional printed tablets. The relative bioavailabilities of the three-dimensional printed and liquisolid tablets compared to commercial product were 121.68% and 113.86%, respectively. Therefore, the liquisolid and three-dimensional printed tablets are promising techniques for modifying glimepiride release and improving in vivo performance but more clinical investigations are required.

Finasteride (FSD), a specific competitive inhibitor of the steroid type-II 5α-reductase enzyme, is used in treatment of benign prostate hyperplasia (BPH) and male pattern baldness. The drug is of limited solubility that affect its dissolution and bioavailability. The aim was to study the effect of FSD particle size reduction on the pharmacokinetic, tissue distribution and cellular permeation. An optimized drug micro- and nano-particles were developed, characterized, administered to group of rats, and systemic pharmacokinetic and tissue distribution within target and not-target organs were determined using near-infrared (NIR) spectroscopy technique. Moreover, the cellular permeation of the prepared formulations through normal prostate epithelial cells was assessed and compared to pure FSD. The developed micro- and nano-particles were of 930 and 645 nm, respectively. Plasma maximum drug levels (Cmax) and overall exposure (AUC) of both formulations were not significantly higher than unformulated drug. However, micronized FSD achieved significant higher concentration within the target tissue (prostate) within the current study compared to pure drug and nano-sized formulation as well. Yet, this is explained by the higher sequestration ability of spleen tissue to the nano-sized formula compared to micro-sized FSD. At the cellular level, permeation of nano-sized FSD through prostate epithelial cells was superior to the unformulated FSD as well as the micro-sized drug formulation. FSD particle size reduction significantly influences its cellular permeation and to a lesser extend affect its systemic pharmacokinetics and tissue distribution after oral administration.

This work aimed to develop a three-dimensional printed (3DP) tablet containing glimepiride (GLMP) and/or rosuvastatin (RSV) for treatment of dyslipidemia in patients with diabetes. Curcumin oil was extracted from the dried rhizomes of Curcuma longa and utilized to develop a self-nanoemulsifying drug delivery system (SNEDDS). Screening mixture experimental design was conducted to develop SNEDDS formulation with a minimum droplet size. Five different semi-solid pastes were prepared and rheologically characterized. The prepared pastes were used to develop 3DP tablets using extrusion printing. The quality attributes of the 3DP tablets were evaluated. A non-compartmental extravascular pharmacokinetic model was implemented to investigate the in vivo behavior of the prepared tablets and the studied marketed products. The optimized SNEDDS, of a 94.43 ± 3.55 nm droplet size, was found to contain 15%, 75%, and 10% of oil, polyethylene glycol 400, and tween 80, respectively. The prepared pastes revealed a shear-thinning of pseudoplastic flow behavior. Flat-faced round tablets of 15 mm diameter and 5.6–11.2 mm thickness were successfully printed and illustrated good criteria for friability, weight variation, and content uniformity. Drug release was superior from SNEDDS-based tablets when compared to non-SNEDDS tablets. Scanning electron microscopy study of the 3DP tablets revealed a semi-porous surface that exhibited some curvature with the appearance of tortuosity and a gel porous-like structure of the inner section. GLMP and RSV demonstrated relative bioavailability of 159.50% and 245.16%, respectively. Accordingly, the developed 3DP tablets could be considered as a promising combined oral drug therapy used in treatment of metabolic disorders. However, clinical studies are needed to investigate their efficacy and safety.

Background: Aromatic aldehydes, with their ability to increase the oxygen affinity of sickle hemoglobin, have become important therapeutic agents for sickle cell disease (SCD). One such compound, voxelotor, was recently approved for SCD treatment. Methyl 6-((2-formyl-3-hydroxyphenoxy)methyl) picolinate (PP10) is another promising aromatic aldehyde, recently reported by our group. Like voxelotor, PP10 exhibits O2-dependent antisickling activity, but, unlike voxelotor, PP10 shows unique O2-independent antisickling effect. PP10, however, has limited solubility. This study therefore aimed to develop oral and parenteral formulations to improve PP10 solubility and bioavailability. Methods: Oral drug tablets with 2-hydroxypropyl beta cyclodextrin (HP-β-CD), polyvinylpyrrolidone, or Eudragit L100-55 PP10-binary system, and an intravenous (IV) formulation with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) or HP-β-CD, were developed. The pharmacokinetic behavior of the formulations was studied in Sprague-Dawley rats. PP10, a methylester, and its acid metabolite were also studied in vitro with sickle whole blood to determine their effect on Hb modification, Hb oxygen affinity, and sickle red blood cell inhibition. Results: Aqueous solubility of PP10 was enhanced ~5 times with the HP-β-CD binary system, while the TPGS aqueous micelle formulation was superior, with a drug concentration of 0.502 ± 0.01 mg/mL and a particle size of 26 ± 3 nm. The oral tablets showed relative and absolute bioavailabilities of 173.4% and 106.34%, respectively. The acid form of PP10 appeared to dominate in vivo, although both PP10 forms demonstrated pharmacologic effect. Conclusion: Oral and IV formulations of PP10 were successfully developed using HP-β-CD binary system and TPGS aqueous micelles, respectively, resulting in significantly improved solubility and bioavailability.

Ketoconazole (KET), a synthetic imidazole broad-spectrum antifungal agent, is characterized by its poor aqueous solubility and high molecular weight, which might hamper its corneal permeation. The aim was to develop an ophthalmic formulation loaded with optimized trans-ethosomal vesicles to enhance KET ocular permeation, antifungal activity, rapid drug drainage, and short elimination half-life. Four formulation factors affecting the vesicles’ size, zeta potential, entrapment efficiency, and flexibility of the trans-ethosomes formulations were optimized. The optimum formulation was characterized, and their morphological and antifungal activity were studied. Different ophthalmic formulations loaded with the optimized vesicles were prepared and characterized. The ocular irritation and in vivo corneal permeation were investigated. Results revealed that the drug-to-phospholipid-molar ratio, the percentage of edge activator, the percentage of ethanol, and the percentage of stearyl amine significantly affect the characteristics of the vesicles. The optimized vesicles were spherical and showed an average size of 151.34 ± 8.73 nm, a zeta potential value of +34.82 ± 2.64 mV, an entrapment efficiency of 94.97 ± 5.41%, and flexibility of 95.44 ± 4.33%. The antifungal activity of KET was significantly improved following treatment with the optimized vesicles. The developed in situ gel formulations were found to be nonirritating to the cornea. The trans-ethosomes vesicles were able to penetrate deeper into the posterior eye segment without any toxic effects. Accordingly, the in situ developed gel formulation loaded with KET trans-ethosomes vesicles represents a promising ocular delivery system for the treatment of deep fungal eye infections.

Objective(s): The aim of this work was to investigate the effect of the natural and the chemically modified form of cyclodextrins namely; β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) respectively on the solubility and dissolution rate of aripiprazole; an antipsychotic medication showing poor aqueous solubility. Materials and Methods: Phase solubility of aripiprazole with the studied CDs and the complexation efficiency values (CE) which reflect the solubilizing power of the CDs towards the drug was performed. Solid binary systems of aripiprazole with CDs were prepared by kneading, microwave irradiation and freeze-drying techniques at 1:1 and 1:2 (drug to CD) molar ratios. Drug-CD physical mixtures were also prepared in the same molar ratios for comparison. The dissolution of aripiprazole-binary systems was carried out to select the most appropriate CD type, molar ratio and preparation technique. Results: Phase solubility study indicated formation of higher order complexes and the complexation efficiency values was higher for HP-β-CD compared to β-CD. Drug dissolution study revealed that aripiprazole dissolution was increased upon increasing the CD molar ratio and, the freeze-drying technique was superior to the other studied methods especially when combined with the HP-β-CD. The cyclodextrin type, preparation technique and molar ratio exhibited statistically significant effect on the drug dissolution at P≤ 0.05. Conclusion: The freeze-dried system prepared at molar ratio 1:2 (drug: CD) can be considered as efficient tool for enhancing aripiprazole dissolution with the possibility of improving its bioavailability