Search

Objectives. The aim of the study was to evaluate comparatively by scanning electron microscope (SEM) and energy dispersive spectrophotometry (EDS) the physical and chemical homogeneity of some luting materials used for cementation of three types of posts. Materials and method. We selected 12 irretrievable monoradicular teeth extracted in our dental offices. After extraction, all teeth were prepared for cementation with 4 different cements (NANOCORE DUAL, CEMBEST, PANAVIA SA and CEMENT-ONE) of three types of posts: prefabricated titanium post, FibreKleer 4x fiberglass post (Pentron) and post cast from NiCrMo alloy. Afterwards, the samples were embedded in resin and prepared metallographically for examination with the Phenom ProX scanning electron microscope equipped with an energy dispersive spectrophotometer with X Rays. Results. SEM studies provide valuable ultrastructural information regarding the degree of filling with luting materials. The four studied cements do not present an inhomogeneous composition in the EDS analysis, not having significantly increased values between the 2 analyzed points for each of the 12 samples taken in the study. Conclusions. Among the four luting materials studied comparatively, PANAVIA SA seems to best fill the existing spaces between posts and the limits of dental preparations, being closely followed by CEMENT-One and CEMBEST. In last place is NANOCORE DUAL, which presents discontinuities in the mass of material and at the border with the preparations. [ABSTRACT FROM AUTHOR]

Objectives. The purpose of the present study was to evaluate by scanning electron microscope (SEM) and energy dispersive spectrophotometry (EDS), the degree of bone mineralization of the tissues on the surface of faliure dental implants with immediate or late loading. Materials and method. In the study, 8 dental explants from 8 clinically healthy, non-smoking patients were taken. All implants were inserted by the same dental surgeon, 4 of them were immediate loaded and 4 were late prosthetically loaded by the same dentist. The ablation of the implants was performed as atraumatically as possible and they were collected in sterile containers and sent to the BIOMAT Research Center, where they were subjected to SEM and EDS analyses. The ratios between the chemical elements calcium and nitrogen (Ca/N), phosphorus and nitrogen (P/N), respectively calcium and phosphorus (Ca/P) were calculated for each of the 8 samples and were statistically analyzed. Results. If we compare the degree of coverage of the implants with bone tissue in different phases of mineralization, we find that the bone structures occupy a larger surface area of the implants in the cases with immediate loading compared to the cases with late loading. Thus, out of 4 immediately loaded implants, 2 were completely covered, one showed very little exposed areas, and the fourth showed alternating covered and uncovered areas. Regarding the late loaded implants, three showed alternation between covered and uncovered areas and only one was completely covered with bone. Conclusions. The degree of coverage of the explants with bone tissue was better represented for the immediate loading cases. The degree of mineralization of the bone tissue covering the explants was higher for cases with immediate loading.To confirm the obtained results, it is necessary to expand the study on larger batches of samples. [ABSTRACT FROM AUTHOR]

Objectives. The aim of the present study was to analyze comparatively, through the finite element method (FEM), the biomechanical behavior of different types of devices used to increase the resistance of restorations on endodontically treated teeth, upon the experimental application of a force of 350N. Materials and methods. We studied comparatively three types of posts, respectively: fiberglass post, cast post from Cr-Co-Mo alloy and prefabricated titanium post. Three irretrievable extracted teeth for periodontal reasons were endodontically treated and then specifically prepared for cementation of this devices. The teeth were scanned at a radio-diagnostic center, and the obtained DICOM files were processed with MIMICS and 3-matic and then subjected to finite element analysis with ANSYS. Results. From the 48 simulations carried out for the case of all-ceramic crown coverage, the use of titanium post is associated with 25 situations in which maximum or minimum values appear, the use of cast post presents 12 situations in which maximum or minimum values are developed, the use of fiberglass posts is associated with 10 simulations where maximum or minimum values occur, and in one case the deformations are equal. Regarding the use of the zirconium oxide crown, the results are comparable. Conclusions. The presence of zirconium oxide crowns generally produces less valuable stresses and deformations at the level of the components. The stress and strain values are lowest when using fiberglass posts, followed closely by cast post and far behind by titanium post. In all simulated situations, the limit values of stresses and strains are mostly recorded at the tooth root, which is susceptible to fracture in case of parafunctional forces, followed by the three devices themselves and the covering crowns. [ABSTRACT FROM AUTHOR]

Objectives. The purpose of this research was to study, in the case of immediate loading, the biomechanical effect produced by the length of the implants. Material and method. The study material was a CBCT analysis performed on a patient from one dental office in Bucharest. An segment of edentulous mandibular bone was selected from the CBCT, which was processed with Mimics Innovation Suite, respectively Mimics and 3-matic. After processing the bone segment, two implants of the same manufacturer, with identical design, but different length – 10 and 13 mm respectively, were selected from the BIOMAT database. To simulate immediate loading, the bone-implant interface was not blocked and the mandible was defined with properties that characterize a bone with moderate density. A perpendicular masticatory force of 200N was applied to each of the two implants. The software ANSYS calculated the minimum, maximum values and their geometric means for the possible stresses produced on both the shorter implant (10 mm) and the longer implant (13 mm). Results. In the case of short implants, higher average stresses develop along the entire length of the implant, towards the vestibular bone plate, while in the case of long implants the higher stress seems to be cantoned towards the apical side. Conclusions. The present study shows that, in the case of immediate loading, the use of longer implants (13 mm) reduces by more than 50% the geometric mean of the stresses to which the bone-implant interface is subjected than in the case of the use of shorter implants (10 mm). In both types of implants, higher stresses occur at the level of the screw fixing the abutment in the implant. [ABSTRACT FROM AUTHOR]