Search

In this study, the effects of polyaniline (PANI) incorporation (3 wt% of PANI) and graphene nanoplatelets (GNPs) loading (0.1–0.7 wt%) on the mechanical, thermal, and electrical performance of epoxy matrix were investigated. The incorporation of 0.3 wt% GNPs optimally enhanced the bending strength, bending modulus, tensile strength, tensile modulus, and impact strength (90 MPa, 1422 MPa, 63 MPa, 602 MPa, and 8.29 kJm−2, respectively). At 0.3 wt% GNPs, the hybridization effect optimally enhanced the glass transition behaviour of the epoxy nanocomposites. The electrical and thermal conductivities of epoxy were improved upon the inclusion of PANI, and this increase was further augmented when the GNPs content increased to 0.3 wt%. However, higher GNPs contents deteriorated the mechanical performance and electrical and heat conduction. Field emission scanning electron microscopy showed good filler distribution and effective interactions among the GNPs, PANI, and epoxy components with appropriate compositions.

The finished product natural rubber latex gloves consist of latex proteins, which may pose a risk of allergic reactions in some latex-sensitive individuals. The allergic reactions depend on mild exposure to heavy exposure. An alternative solution to allergic users, usage of latex-free gloves are lack of elasticity and less comfort. This study aims to investigate natural rubber films protein reduction via three types of leaching solvent: acetic acid, sodium hydroxide, and ethanol in the leaching process. Then the influence of leaching solvent concentration on the physical properties of natural rubber gloves was analyzed. It was found that the acetic acid performed greater protein reduction effect (30.07%), followed by sodium hydroxide (27.77%), whereas the ethanol was shown to be less significant to protein reduction. All samples were fulfilling the mechanical properties as required in ASTM standard.

Conventional polymer blending has a shortcoming in conductivity characteristic. This research addresses the preparation of conductive thermoplastic natural rubber (TPNR) blends with graphene nanoplates (GNPs)/polyaniline (PANI) through melt blending using an internal mixer. The effect of PANI content (10, 20, 30, and 40 wt %) on the mechanical and thermal properties, thermal and electrical conductivities, and morphology observation of the TPNR/GNPs/PANI nanocomposites was investigated. The results showed that the tensile and impact properties as well as thermal conductivity of nanocomposite had improved with the incorporation of 3 wt % of GNPs and 20 wt % of PANI as compared to neat TPNR and reduced with further increase of the PANI content. It was observed that the GNPs and PANI acted as a critical component to improve the thermal stability and electrical conductivity of the TPNR/GNPs/PANI nanocomposites. The most improved conductivity of 5.22 E‐5 S/cm was observed at 3 wt % GNPs and 40 wt % PANI. Variable‐pressure scanning electron microscopy micrograph revealed the good interaction and distribution of GNPs and PANI within TPNR matrix at PANI loadings lower than 30 wt %. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48873. [ABSTRACT FROM AUTHOR]

High-fiber loading green composites were prepared from recycled high-density polyethylene (rHDPE)/recycled polyethylene terephthalate (rPET) blend matrix and rice husk (RH) as filler (from 40 wt% up to 80 wt%) via corotating twin-screw extruder and compression molding. The water absorption (WA) upon immersion in sea water, mechanical behavior, and combustion enthalpy of green composites were examined. The WA mechanisms obeyed the Fickian diffusion. The computed diffusion coefficient (D), thermodynamic solubility (S), permeability (P), and orthotropic swelling were generally increased as a function of RH filler. The increment of tensile strength and modulus of composites were maximized up to 16% and 121%, respectively, which was achieved at 70 wt% RH filler. The theoretical prediction of tensile strength and Young's modulus from micromechanical models for random oriented RH fiber/blend composites were compared with the experimental results. As the RH weight fraction increased, the combustion enthalpy decreased (by approximately 30–48%) and thereby the enhancing the fire retardancy of green composite. [ABSTRACT FROM AUTHOR]

The thermal conductivity and mechanical performance of a hybrid multi‐walled carbon nanotubes/silicon carbide (MWCNTs/SiC)‐reinforced thermoplastic natural rubber (TPNR) nanocomposite were investigated. TPNR was fabricated from polypropylene, natural rubber (NR) and liquid NR at a volume ratio of 70:20:10, respectively. The Young's modulus, the tensile strength, and the storage and loss modulus of the nanocomposites with a single filler of MWCNTs or SiC were enhanced compared with those of neat TPNR. The greatest improvements in these properties were achieved at a composition of 1.5 wt% SiC‐1.5 wt% MWCNTs‐reinforced nanocomposite. In addition, the thermal conductivity and specific heat capacity of the nanocomposites, determined using a laser flash technique, were improved in the 3 wt% SiC‐reinforced nanocomposite sample relative to those of the pure sample and the other reinforced nanocomposites. Based on these findings, MWCNTs and SiC could serve as suitable percolated networks of hybrid reinforcement fillers to achieve optimal thermal and mechanical properties in the TPNR matrix. POLYM. COMPOS., 40:E695–E703, 2019. © 2018 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

In this work, thin films of solid polymer electrolyte made of pure poly (ethylene oxide) doped with cesium iodide (CsI) were prepared using casting method. The films contain different (CsI) concentrations: 0 %, 1 %, 4 %, 8 %, 12 %, and 16 % by weight. The optical properties such as the absorption coefficient, energy gap, refractive index, extinction coefficient, and dielectric constants have been determined in the wavelength range (300 – 800) nm. The results obtained showed that the optical constants change with increase of cesium iodide concentration. The absorption spectra of thin films at different CsI concentrations showed changes in the wavelength range. The optical dispersion parameters have been analyzed by the single oscillator model. The value of Eo and Ed were found and the other parameters have been determined by Wemple-DiDomenico method. [ABSTRACT FROM AUTHOR]

This article studies the enhancement in the properties of thermoplastic natural rubber (TPNR) reinforced by graphene oxide (GnO) and multiwalled carbon nanotubes (MWCNTs). TPNR is a blend of polypropylene and liquid natural rubber (NR), which is used as a compatibilizer and NR at a percentage of volume ratio 70:10:20, respectively. Using TPNR as the host matrix, a number of TPNR/carbon nanotubes (CNTs), TPNR/GnO, and hybrid TPNR/GnO/CNTs nanocomposites are processed and their mechanical, thermal, and electrical properties are characterized. The results extracted from tensile and impact test showed that tensile strength, Young’s modulus, and storage modulus of TPNR/GnO/MWCNTs hybrid nanocomposite increased as compared with TPNR composite and TPNR/GnO nanocomposite but lower than TPNR/MWCNTs nanocomposite. On the other hand, the elongation at break considerably decreased with increasing the content of both types of nanoparticles. Based on the experimental results, the thermal, electrical conductivity of a 0.5 wt% MWCNTs-reinforced sample increased as compared with a pure TPNR and other MWCNTs/GnO-reinforced composites. The improved dispersion properties of the nanocomposites can be due to altered interparticle interactions. MWCNTs, GnO, and MWCNTs–GnO networks are well combined to generate a synergistic effect that is shown by scanning electron microscopy micrographs. With the existence of this network, the mechanical, thermal, and electrical properties of the nanocomposite were improved significantly. [ABSTRACT FROM AUTHOR]