Search

The Mott insulator Ca2RuO4 is the subject of much recent attention following reports of emergent nonequilibrium steady states driven by applied electric fields or currents. In this paper, we carry out infrared nano-imaging and optical-microscopy measurements on bulk single crystal Ca2RuO4 under conditions of steady current flow to obtain insight into the current-driven insulator-to-metal transition. We observe macroscopic growth of the current-induced metallic phase, with nucleation regions for metal and insulator phases determined by the polarity of the current flow. A remarkable metal-insulator-metal microstripe pattern is observed at the phase front separating metal and insulator phases. The microstripes have orientations tied uniquely to the crystallographic axes, implying a strong coupling of the electronic transition to lattice degrees of freedom. Theoretical modeling further illustrates the importance of the current density and confirms a submicron-thick surface metallic layer at the phase front of the bulk metallic phase. Our work confirms that the electrically induced metallic phase is nonfilamentary and is not driven by Joule heating, revealing remarkable new characteristics of electrically induced insulator-metal transitions occurring in functional correlated oxides.

Recent progress in ultrafast spectroscopy and semiconductor technology is enabling unique applications in screening, detection, and diagnostics in the Terahertz (T-ray) regime. The promise of efficaciously operation in this spectral region is tempered by the lack of devices that can spectrally analyze samples at sufficient temporal and spatial resolution. Real-time, multispectral T-ray (Mul-T) imaging is reported by designing and demonstrating hyperspectral metamaterial focal plane array (MM-FPA) interfaces allowing multiband (and individually tunable) responses without compromising on the pixel size. These MM-FPAs are fully compatible with existing microfabrication technologies and have low noise when operating in the ambient environment. When tested with a set of frequency switchable quantum cascade lasers (QCLs) for multicolor illumination, both MM-FPAs and QCLs can be tuned to operate at multiple discrete THz frequencies to match analyte "fingerprints." Versatile imaging capabilities are presented, including unambiguous identification of concealed substances with intrinsic and/or human-engineered THz characteristics as well as effective diagnosis of cancerous tissues without notable spectral signatures in the THz range, underscoring the utility of applying multispectral approaches in this compelling wavelength range for sensing/identification and medical imaging.

Broadband tunability is a central theme in contemporary nanophotonics and metamaterials research. Combining metamaterials with phase change media offers a promising approach to achieve such tunability, which requires a comprehensive investigation of the electromagnetic responses of novel materials at subwavelength scales. In this work, we demonstrate an innovative way to tailor band-selective electromagnetic responses at the surface of a heavy fermion compound, samarium sulfide (SmS). By utilizing the intrinsic, pressure sensitive, and multi-band electron responses of SmS, we create a proof-of-principle heavy fermion metamaterial, which is fabricated and characterized using scanning near-field microscopes with

The strong electron-lattice interactions in correlated electron systems provide unique opportunities for altering the material properties with relative ease and flexibility. In this Rapid Communication, we use localized strain control via a focused-ion-beam patterning of TiO2 substrates to demonstrate that one can selectively engineer the insulator-to-metal transition temperature, the fractional component of the insulating and metallic phases, and the degree of optical anisotropy down to the length scales of the intrinsic phase separation in VO2 thin films without altering the quality of the films. The effects of localized strain control on the strongly correlated electron system are directly visualized by state-of-the-art IR near-field imaging and spectroscopy techniques and x-ray microdiffraction measurements.

Precise patterning of biomaterials has widespread applications, including drug release, degradable implants, tissue engineering, and regenerative medicine. Patterning of protein-based microstructures using UV-photolithography has been demonstrated using protein as the resist material. The Achilles heel of existing protein-based biophotoresists is the inevitable wide molecular weight distribution during the protein extraction/regeneration process, hindering their practical uses in the semiconductor industry where reliability and repeatability are paramount. A wafer-scale high resolution patterning of bio-microstructures using well-defined silk fibroin light chain as the resist material is presented showing unprecedent performances. The lithographic and etching performance of silk fibroin light chain resists are evaluated systematically and the underlying mechanisms are thoroughly discussed. The micropatterned silk structures are tested as cellular substrates for the successful spatial guidance of fetal neural stems cells seeded on the patterned substrates. The enhanced patterning resolution, the improved etch resistance, and the inherent biocompatibility of such protein-based photoresist provide new opportunities in fabricating large scale biocompatible functional microstructures.

We proposed a brain‐to‐brain interface (B2BI) that enabled effective control of mouse turning behavior by human mind using an implantable, ultra‐flexible neural probe. The neural probe was capable of writing in neural signals to the mouse brain, with effective electrical stimulation observed at a low current of 5 μA. Additionally, a wireless electroencephalogram (EEG) device was developed for the remote transmission of human brain signals, which were decoded by the canonical correlation analysis (CCA) method with an accuracy rate of up to 98.6%. These results demonstrate the potential of B2BI technology to enable communication and control between humans and animals. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Silk protein fibres produced by silkworms and spiders are renowned for their unparalleled mechanical strength and extensibility arising from their high-β-sheet crystal contents as natural materials. Investigation of β-sheet-oriented conformational transitions in silk proteins at the nanoscale remains a challenge using conventional imaging techniques given their limitations in chemical sensitivity or limited spatial resolution. Here, we report on electron-regulated nanoscale polymorphic transitions in silk proteins revealed by near-field infrared imaging and nano-spectroscopy at resolutions approaching the molecular level. The ability to locally probe nanoscale protein structural transitions combined with nanometre-precision electron-beam lithography offers us the capability to finely control the structure of silk proteins in two and three dimensions. Our work paves the way for unlocking essential nanoscopic protein structures and critical conditions for electron-induced conformational transitions, offering new rules to design protein-based nanoarchitectures.

Recent advancements in neural probe technology have become pivotal in both neuroscience research and the clinical management of neurological disorders. State-of-the-art developments have led to the advent of multichannel, high-density bidirectional neural interfaces that are adept at both recording and modulating neuronal activity within the central nervous system. Despite this progress, extant bidirectional probes designed for simultaneous recording and stimulation are beset with limitations, including elicitation of inflammatory responses and insufficient charge injection capacity. In this paper, we delineate the design and application of an innovative ultraflexible bidirectional neural probe engineered from polyimide. This probe is distinguished by its ability to facilitate high-resolution recordings and precise stimulation control in deep brain regions. Electrodes enhanced with a PEDOT:PSS/IrOx composite exhibit a substantial increase in charge storage capacity, escalating from 0.14 ± 0.01 mC/cm2 to an impressive 24.75 ± 0.18 mC/cm2. This augmentation significantly bolsters the electrodes' charge transfer efficacy. In tandem, we observed a notable reduction in electrode impedance, from 3.47 ± 1.77 MΩ to a mere 41.88 ± 4.04 kΩ, while the phase angle exhibited a positive shift from −72.61 ± 1.84° to −34.17 ± 0.42°. To substantiate the electrodes' functional prowess, we conducted in vivo experiments, where the probes were surgically implanted into the bilateral motor cortex of mice. These experiments involved the synchronous recording and meticulous analysis of neural signal fluctuations during stimulation and an assessment of the probes' proficiency in modulating directional turning behaviors in the subjects. The empirical evidence corroborates that targeted stimulation within the bilateral motor cortex of mice can modulate the intensity of neural signals in the stimulated locale, enabling the directional control of the mice's turning behavior to the contralateral side of the stimulation site. [ABSTRACT FROM AUTHOR]