Search

The study of the polarimetric target decomposition algorithm with physical scattering models has contributed to the development of the field of remote sensing because of its simple and clear physical meaning with a small computational effort. However, most of the volume scattering models in these algorithms are for forests or crops, and there is a lack of volume scattering models for grasslands. In order to improve the accuracy of the polarimetric target decomposition algorithm adapted to grassland data, in this paper, a novel volume scattering model is derived considering the characteristics of real grassland plant structure and combined with the backward scattering coefficients of grass, which is abstracted as a rotatable ellipsoid of variable shape. In the process of rotation, the possibility of rotation is considered in two dimensions, the tilt angle and canting angle; for particle shape, the anisotropy degree A is directly introduced as a parameter to describe and expand the applicability of the model at the same time. After obtaining the analytical solution of the parameters and using the principle of least negative power to determine the optimal solution of the model, the algorithm is validated by applying it to the C-band AirBorne dataset of Hunshandak grassland in Inner Mongolia and the X-band Cosmos-Skymed dataset of Xiwuqi grassland in Inner Mongolia. The performance of the algorithm with five polarimetric target decomposition algorithms is studied comparatively. The experimental results show that the algorithm proposed in this paper outperforms the other algorithms in terms of grassland decomposition accuracy on different bands of data. [ABSTRACT FROM AUTHOR]

With the gradual expansion of mining scale in open-pit coal mines, slope safety problems are increasingly diversified and complicated. In order to reduce the potential loss caused by slope sliding and reduce the major threat to the safety of life and property of residents in the mining area, this study selected two mining areas in Xinjiang as cases and focused on the relationship between phase noise and deformation. The study predicts the specific time point of slope sliding by analyzing the dynamic history correlation tangent angle between the two. Firstly, the time series data of the micro-variation monitoring radar are used to obtain the small deformation of the study area by differential InSAR (D-InSAR), and the phase noise is extracted from the radar echo in the sequence data. Then, the volume of the deformation body is calculated by analyzing the small deformation at each time point, and the standard deviation of the phase noise is calculated accordingly. Finally, the sliding time of the deformation body is predicted by combining the tangent angle of the ratio of the volume of the deformation body to the standard deviation of the phase noise. The results show that the maximum deformation rates of the deformation bodies in the studied mining areas reach 10.1 mm/h and 6.65 mm/h, respectively, and the maximum deformation volumes are 2,619,521.74 mm3 and 2,503,794.206 mm3, respectively. The predicted landslide time is earlier than the actual landslide time, which verifies the effectiveness of the proposed method. This prediction method can effectively identify the upcoming sliding events and the characteristics of the slope, provide more accurate and reliable prediction results for the slope monitoring staff, and significantly improve the efficiency of slope monitoring and early warning. [ABSTRACT FROM AUTHOR]

Azimuth multi-channel synthetic aperture radar (SAR) has always been an important technical means to achieve high-resolution wide-swath (HRWS) SAR imaging. However, in the space-borne azimuth multi-channel SAR system, random phase noise will be produced during the operation of each channel receiver. The phase noise of each channel is superimposed on the SAR echo signal of the corresponding channel, which will cause the phase imbalance between the channels and lead to the generation of false targets. In view of the above problems, this paper proposes a random phase noise compensation method for space-borne azimuth multi-channel SAR. This method performs feature decomposition by calculating the covariance matrix of the echo signal and converts the random phase noise estimation into the optimal solution of the cost function. Considering that the phase noise in the receiver has frequency-dependent and time-varying characteristics, this method calculates the phase noise estimation value corresponding to each range-frequency point in the range direction and obtains the phase noise estimation value by expectation in the azimuth direction. The proposed random phase noise compensation method can suppress false targets well and make the radar present a well-focused SAR image. Finally, the usefulness of the suggested method is verified by simulation experiments. [ABSTRACT FROM AUTHOR]

When using ground-based synthetic aperture radar (GB-SAR) for monitoring open-pit mines, dynamic atmospheric conditions can interfere with the propagation speed of electromagnetic waves, resulting in atmospheric phase errors. These errors are particularly complex in rapidly changing weather conditions or steep terrain, significantly impacting monitoring accuracy. In such scenarios, traditional regression model-based atmospheric phase correction (APC) methods often become unsuitable. To address this issue, this paper proposes a clustering method based on the spatial autocorrelation function. First, the interferogram is uniformly divided into multiple blocks, and the phase consistency of each block is evaluated using the spatial autocorrelation function. Then, a region growing algorithm is employed to classify each block according to its phase pattern, followed by merging adjacent blocks based on statistical data. To verify the feasibility of the proposed method, both the traditional regression model-based method and the proposed method were applied to deformation monitoring of an open-pit mine in Northwest China. The experimental results show that for complex atmospheric phase scenarios, the proposed method significantly outperformed traditional methods, demonstrating its superiority. [ABSTRACT FROM AUTHOR]

In recent years, the development of neural networks has significantly advanced their application in Synthetic Aperture Radar (SAR) ship target detection for maritime traffic control and ship management. However, traditional neural network architectures are often complex and resource intensive, making them unsuitable for deployment on artificial satellites. To address this issue, this paper proposes a lightweight neural network: the Multi-Scale SAR Ship Detection Network (MSSD-Net). Initially, the MobileOne network module is employed to construct the backbone network for feature extraction from SAR images. Subsequently, a Multi-Scale Coordinate Attention (MSCA) module is designed to enhance the network's capability to process contextual information. This is followed by the integration of features across different scales using an FPN + PAN structure. Lastly, an Anchor-Free approach is utilized for the rapid detection of ship targets. To evaluate the performance of MSSD-Net, we conducted extensive experiments on the Synthetic Aperture Radar Ship Detection Dataset (SSDD) and SAR-Ship-Dataset. Our experimental results demonstrate that MSSD-Net achieves a mean average precision (mAP) of 98.02% on the SSDD while maintaining a compact model size of only 1.635 million parameters. This indicates that MSSD-Net effectively reduces model complexity without compromising its ability to achieve high accuracy in object detection tasks. [ABSTRACT FROM AUTHOR]

The frequency diversity arc array (FDAA) improves the structure of the traditional frequency diversity array (FDA) from a linear array structure to an arc array structure, so that the FDAA not only has the advantages of the FDA but also has a large angle and omnidirectional scanning capability. However, when it is equivalent to a linear array, this arc-shaped structure will lead to the phenomenon of inverse density weighting, which leads to a higher sidelobe level of the FDAA beam pattern. In order to solve the problem of a high sidelobe level at a certain position of the FDAA, a frequency diversity arc array with angle-distance two-dimensional broadening null steering is proposed for sidelobe suppression. Using a structural model of the FDAA, the problem of the high sidelobe was analyzed. The linear constrained minimum variance (LCMV) method was used to generate a null with a certain width at the position of the fixed strong sidelobe level in the angle domain and the distance domain of the FDAA beam pattern, to reduce the FDAA sidelobe level. Then, the angle domain and distance domain fixed positions of the FDAA were simulated to generate the null beam pattern. The simulation results verified the effectiveness of this method for reducing the sidelobe level. [ABSTRACT FROM AUTHOR]

The frequency diverse array (FDA) is capable of generating range-angle-dependent beampatterns by introducing a tiny frequency offset to the transmit carrier frequency of each array element. However, the beam-scanning potential of conventional linear FDA applications is limited, notably in their incapacity for 360° omnidirectional scanning. This paper introduces a method that leverages the geometric configuration of circular frequency diverse arrays (CFDAs) for synthesizing and optimizing beampatterns through a practical engineering approach. Initially, we compute the structural parameters and configurations of CFDA. Subsequently, the isophase plane is utilized to adjust the phase of each array element. Ultimately, the CFDA structure is used to optimize the non-uniform frequency offset, and the beampattern, which is capable of 360° omnidirectional scanning, is realized by low sidelobe optimization. Simulation results affirm that the CFDA antenna, as per the actual engineering model, possesses precise dot-shaped beampattern scanning abilities across both range and angle dimensions. [ABSTRACT FROM AUTHOR]

Ground-based radar is a microwave remote sensing imaging technology that has been gradually developed throughout the past 20 years so that it has become mature. At present, it has been widely used in monitoring geological disasters such as landslides and collapses. Ground-based radars can detect microvariations in target areas through the principle of interferometry. However, due to human factors, geological factors, and meteorological factors, the radar image of the monitored area is incoherent, which makes long-term quantitative monitoring difficult. Therefore, further developing the application of change detection while considering quantitative monitoring is urgent, to provide effective information on long-term changes and comprehensively understand the dynamic changes in the monitored area. To solve the above problems, an unsupervised change detection method using ground-based radar images and based on an improved Fuzzy C-Means clustering (FCM) algorithm is proposed in this paper. In this method, for the first time, the Nonsubsampled Contourlet Transform (NSCT) is performed on the coherence coefficient map and the mean log ratio map to obtain the fusion difference map. Then, principal component analysis is used to extract the feature vectors of each pixel in the fusion difference image. The FCM is improved according to the characteristics of the ground-based radar images. The improved FCM is used to cluster the feature vectors of each pixel to obtain the change detection result. A ground-based radar LSA was used to monitor the treatment process of a dam in southwest China. During the monitoring process, landslides occurred in the monitored area affected by precipitation and other factors. This method is used to detect the change of the radar image before and after the landslide. The results show that the proposed method allows for easier clustering and segmenting, and the change detection results can significantly reduce the noise points while retaining the change area.

A sparse dictionary reconstruction algorithm based on grid selection is introduced to solve the grid mismatch when using the sparse recovery space time adaptive processing (SR-STAP) algorithm. First, the atom most closely related to clutter is selected from the traditional dictionary through the spectral value dimensionality reduction method. The local mesh is divided around the selected atoms to create mesh cells, and the mesh cells that are most likely to appear in the real clutter points are judged according to the local selection iteration criteria. In this way, the mesh spacing is refined, the local mesh selection is carried out step by step, and the optimal atoms in the local region are constantly adjusted and selected to narrow the search region until the iteration termination condition is met. Finally, the space-time plane is divided using a novel meshing technique that centers around the optimal atom. By removing atoms beyond the maximum range of spatial and Doppler frequencies, the simplified sparse dictionary can overcome the mesh mismatch problem. The simulation results demonstrate that the algorithm enhances the sparse recovery accuracy of clutter space-time spectrum, mitigates the mesh mismatch effect, and boosts STAP performance. [ABSTRACT FROM AUTHOR]

As urban economies flourish and populations become increasingly concentrated, urban surface deformation has emerged as a critical factor in city planning that cannot be overlooked. Surface deformation in urban areas can lead to deformations in structural supports of infrastructure such as road bases and bridges, thereby posing a serious threat to public safety and creating significant safety hazards. Consequently, research focusing on the monitoring of urban surface deformation holds paramount importance. Interferometric synthetic aperture radar (InSAR), as an important means of earth observation, has all-day, wide-range, high-precision, etc., characteristics and is widely used in the field of surface deformation monitoring. However, traditional solitary InSAR techniques are limited in their application scenarios and computational characteristics. Additionally, the manual selection of ground control points (GCPs) is fraught with errors and uncertainties. Permanent scatterers (PS) can maintain high interferometric coherence in man-made building areas, and distributed scatterers (DS) usually show moderate coherence in areas with short vegetation; the combination of DS and PS solves the problem of manually selecting GCPs during track re-flattening and regrading, which affects the monitoring results. In this paper, 45 Sentinel-1B data from 16 February 2019 to 14 December 2021 are used as the data source in the urban area of Horqin District, Tongliao City, Inner Mongolia Autonomous Region, for example. A four-threshold (coherence coefficient threshold, FaSHPS adaptive threshold, amplitude divergence index threshold, and deformation velocity interval) GCPs point screening method for PS-DS, as well as a Small Baseline Subset-Permanent Scatterers-Distributed Scatterers-Interferometric Synthetic Aperture Radar (SBAS-PS-DS-InSAR) method for selecting PS and DS points as ground control points for orbit refinement and re-flattening, are proposed. The surface deformation results obtained using the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) and the SBAS-PS-DS-InSAR proposed in this paper were comparatively analysed and verified. The maximum cumulative line-of-sight settlements were −90.78 mm and −83.68 mm, and the maximum cumulative uplifts are 74.94 mm and 97.56 mm, respectively; the maximum annual average line-of-sight settlements are −35.38 mm/y and −30.38 mm/y, and the maximum annual average uplifts are 25.27 mm/y and 27.92 mm/y. The results were evaluated and analysed in terms of correlation, mean absolute error (MAE), and root mean square error (RMSE). The deformation results of the two InSAR methods were evaluated and analysed in terms of correlation, MAE, and RMSE. The errors show that the Pearson correlation coefficients between the vertical settlement results obtained using the SBAS-PS-DS-InSAR method and the GPS monitoring results were closer to 1. The maximum MAE and RMSE were 13.7625 mm and 14.8004 mm, respectively, which are within the acceptable range; this confirms that the monitoring results of the SBAS-PS-DS-InSAR method were better than those of the original SBAS-InSAR method. SBAS-InSAR method, which is valid and reliable. The results show that the surface deformation results obtained using the SBAS-InSAR, SBAS-PS-DS-InSAR, and GPS methods have basically the same settlement locations, extents, distributions, and temporal and spatial settlement patterns. The deformation results obtained using these two InSAR methods correlate well with the GPS monitoring results, and the MAE and RMSE are within acceptable limits. By comparing the deformation information obtained using multiple methods, the surface deformation in urban areas can be better monitored and analysed, and it can also provide scientific references for urban municipal planning and disaster warning. [ABSTRACT FROM AUTHOR]

Conventional Synthetic Aperture Radar (SAR) moves along a straight line and forms a linear synthetic apertures. It can only obtain the two-dimensional (2-D) image of illuminated scene that is the projection of the three-dimensional (3-D) real scene onto a slant plane. The slant plane 2-D SAR image, however, suffers from layover and foreshortening effects. 3-D SAR imaging enables 3-D resolving capability by extending the acquisition of frequency information from 2-D to 3-D. It can obtain the 3-D distribution of scattering centers; therefore, it solves the geometric deformation problems of layover and foreshortening. 3-D SAR imaging has become a trending topic in research on SAR techniques worldwide. In this paper, we first introduced the concept of 3-D SAR imaging and several typical 3-D SAR imaging modes. Furthermore, it provides a discussion on research progress at home and abroad, particularly focusing on the progress of our research team. Finally, future research prospects are presented.

Aiming at the problems of synthetic-aperture radar (SAR), such as high sampling rate and vulnerability to noise interference in imaging, a sparse reconstruction algorithm based on approximate observation and L1/2 threshold iteration is proposed in this paper. To solve the problem of the large dimension and high computational complexity of the measurement matrix, a sparse reconstruction model based on approximate observation is constructed, and a threshold iterative algorithm to rapidly solve the L1/2 regularization problem is introduced, which can realize sparse signal reconstruction with fewer sampling data and quickly solve the problem. The simulation results of point targets and the measured data of spaceborne SAR show that compared with the traditional matched filtering algorithm and L1 threshold algorithm based on a two-step iteration, the proposed sparse reconstruction algorithm has a faster iteration speed and improves the image quality. [ABSTRACT FROM AUTHOR]