Search

X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background noise in the coded aperture imaging associated with the conventional balanced correlation method, we adopt the Expectation-Maximization (EM) algorithm as the foundation of our imaging reconstruction method. The newly developed imaging reconstruction method is validated with imaging polarimetry and a series of X-ray beam experiments. The method demonstrates the capability to accurately reproduce an extended source comprising multiple segments with distinct polarization degrees. Comparative analysis exhibits a significant enhancement in imaging reconstruction accuracy compared to the balanced correlation method, with the background noise levels reduced to 17%. The outcomes of this study enhance the feasibility of Cube-Sat imaging polarimetry missions in the hard X-ray band, as the combination of Si CMOS sensors and coded apertures is a promising approach for realizing it., Comment: 12 pages, 5 figures, 1 table, accepted for publication in NIM-A

We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of $10$$\unicode{x2013}$$30~\mathrm{keV}$. A successful proof-of-concept experiment was conducted using a fine-pixel CMOS sensor with a $2.5~\mathrm{\mu m}$ pixel size. In this study, we conducted beam experiments to assess the modulation factor (MF) of the CMOS sensor with a $1.5~\mathrm{\mu m}$ pixel size manufactured by Canon and to determine if there was any improvement in the MF. The measured MF was $8.32\% \pm 0.34\%$ at $10~\mathrm{keV}$ and $16.10\% \pm 0.68\%$ at $22~\mathrm{keV}$, exceeding those of the $2.5~\mathrm{\mu m}$ sensor in the $6$$\unicode{x2013}$$22~\mathrm{keV}$ range. We also evaluated the quantum efficiency of the sensor, inferring a detection layer thickness of $2.67 \pm 0.48~{\rm \mu m}$. To develop a more sensitive polarimeter, a sensor with a thicker detection layer, smaller pixel size, and reduced thermal diffusion effect is desirable., Comment: 18 pages, 8 figures, 5 tables, accepted for publication in NIM-A

We analyzed 39 ks NuSTAR observation data of the high mass X-ray binary Cen X-3 in order to investigate the orbital- and spin-phase spectral variability. The observation covers the orbital phase of $\Phi=0.199$-$0.414$ of the source, where $\Phi=0$ corresponds to the mid-eclipse. The orbital-phase-resolved spectroscopy revealed that low energy photons are more dominant for the spectral fluctuation, and a large part of the variability can be explained in terms of absorption by clumps of stellar wind. The spin-phase-resolved spectroscopy together with energy-resolved pulse profiles, on the other hand, presented large flux variations in high energy bands, which suggests that the origin of the variability is the different efficiency of Comptonization inside the accretion column. The energy band which includes Fe emission lines or cyclotron resonance scattering feature (CRSF) shows distinct variability compared to the nearby bands. The Fe lines show low variability along the spin phase, which indicates that the emission regions are apart from the neutron star. The central energy and strength of the CRSF are both positively correlated with the spin-phase-resolved flux, which suggests that the emitted photons face stronger magnetic fields and deeper absorption when they come from high-flux regions. We also examined the independence of the orbital- and spin-phase variability. They showed no correlation with each other and were highly independent, which implies the accretion stream is stable during the observation., Comment: 20 pages, 12 figures, accepted for publication in ApJ

We have developed a neural network model to perform event reconstruction of Compton telescopes. This model reconstructs events that consist of three or more interactions in a detector. It is essential for Compton telescopes to determine the time order of the gamma-ray interactions and whether the incident photon deposits all energy in a detector or it escapes from the detector. Our model simultaneously predicts these two essential factors using a multi-task neural network with three hidden layers of fully connected nodes. For verification, we have conducted numerical experiments using Monte Carlo simulation, assuming a large-area Compton telescope using liquid argon to measure gamma rays with energies up to $3.0\,\mathrm{MeV}$. The reconstruction model shows excellent performance of event reconstruction for multiple scattering events that consist of up to eight hits. The accuracies of hit order prediction are around $60\%$ while those of escape flags are higher than $70\%$ for up to eight-hit events of $4\pi$ isotropic photons. Compared with two other algorithms, a classical model and a physics-based probabilistic one, the present neural network method shows high performance in estimation accuracy particularly when the number of scattering is small, 3 or 4. Since simulation data easily optimize the network model, the model can be flexibly applied to a wide variety of Compton telescopes., Comment: 26 pages, 13 figures, 3 tables, accepted for publication in NIM A

Aimed at progress in mega-electron volt (MeV) gamma-ray astronomy, which has not yet been well-explored, Compton telescope missions with a variety of detector concepts have been proposed so far. One of the key techniques for these future missions is an event reconstruction algorithm that is able to determine the scattering orders of multiple Compton scattering events and to identify events in which gamma rays escape from the detectors before they deposit all of their energies. We revisit previous event reconstruction methods and propose a modified algorithm based on a probabilistic method. First, we present a general formalism of the probabilistic model of Compton scattering describing physical interactions inside the detector and measurement processes. Then, we also introduce several approximations in the calculation of the probability functions for efficient computation. For validation, the developed algorithm has been applied to simulation data of a Compton telescope using a liquid argon time projection chamber, which is a new type of Compton telescope proposed for the GRAMS project. We have confirmed that it works successfully for up to 8-hit events, including correction of incoming gamma-ray energies for escape events. The proposed algorithm can be used for next-generation MeV gamma-ray missions featured by large-volume detectors, e.g., GRAMS., Comment: 28 pages, 26 figures, accepted for publication in Astroparticle Physics

The Gamma-Ray and AntiMatter Survey (GRAMS) project is a proposed next-generation balloon/satellite mission targeting both MeV gamma-ray observations and antimatter-based dark matter searches. A cost-effective, large-scale Liquid Argon Time Projection Chamber (LArTPC) detector technology will allow GRAMS to have a significantly improved sensitivity to MeV gamma rays while extensively probing dark matter parameter space via antimatter measurements.

The coded aperture imaging technique is a useful method of X-ray imaging in observational astrophysics. However, the presence of imaging noise or so-called artifacts in a decoded image is a drawback of this method. We propose a new coded aperture imaging method using multiple different random patterns for significantly reducing the image artifacts. This aperture mask contains multiple different patterns each of which generates a different artifact distribution in its decoded image. By summing all decoded images of the different patterns, the artifact distributions are cancelled out, and we obtain a remarkably accurate image. We demonstrate this concept with imaging experiments of a monochromatic 16 keV hard X-ray beam at the synchrotron photon facility SPring-8, using the combination of a CMOS image sensor and an aperture mask that has four different random patterns composed of holes with a diameter of 27 um and a separation of 39 um. The entire imaging system is installed in a 25 cm-long compact size, and achieves an angular resolution of < 30'' (full width at half maximum). In addition, we show by Monte Carlo simulation that the artifacts can be reduced more effectively if the number of different patterns increases to 8 or 16., Comment: 20 pages, 8 figures, accepted for publication in JATIS