Search

Background: Soft tissue balancing in bicruciate-retaining (BCR) total knee arthroplasty (TKA) is a challenge that must be overcome to achieve excellent clinical outcomes. However, the optimal degree of joint laxity has yet to be clarified. This cadaveric study sought to examine joint laxity after BCR TKA using a navigation system. Methods: Knee joint laxity was quantified using an image-free navigation system in 8 intact fresh frozen cadavers under three conditions: the native knee, BCR TKA knee, and BCR TKA knee after anterior cruciate ligament resection. Rotational kinematics in the BCR TKA knee during flexion were compared according to whether joint laxity was increased or decreased. Results: Knee joint laxity after BCR TKA under varus-valgus movement, anterior translation, and internal-external rotation loadings was similar to that of the native knee. However, lateral joint laxity was decreased during flexion in some cases. BCR TKA-treated knees with decreased lateral joint laxity at 90° of flexion demonstrated more limited tibial internal rotation in deep flexion than the native knee (p < 0.05). The loss of internal rotation in deep flexion was partly recovered by using a lateral insert with a posterior slope of +3°. Conclusions: Restoring optimal joint laxity was not always straightforward in BCR TKA if the 4 ligaments were preserved. Lateral joint laxity was potentially decreased in BCR TKA and may result in kinematic conflict during flexion. Surgeons should be aware of the need to achieve sufficient lateral joint laxity in this type of BCR TKA.

The Rotational osteotomy for femoral retroversion has been extremely rare despite the known association between femoral neck retroversion, hip pain, and osteoarthritis. Here, we describe a case of femoral neck retroversion for which proximal femoral rotation osteotomy. A 16-year-old boy with a past history of developmental dysplasia of the both hip treated conservatively presented with a complaint of pain in left hips. On physical examination, flexion of the left hip was limited to 90° with terminal pain. Internal rotation was also limited to 10°. Computed tomography (CT) showed -7.1° anteversion of the left femur. We performed rotational osteotomy to increase femoral anteversion because conservative treatment was not effective. The postoperative course was uneventful. At 12 postoperative months, his left hip pain was completely disappeared and femoral anteversion was 34° on CT scans. Retroversion of the femur is a distinct dynamic factor that should be considered in the evaluation of mechanical causes of hip pain. Restoring the normal rotational alignment of the hip resulted in cure of the impingement due to femoral retroversion.

The aim of this cadaveric study was to evaluate the intraoperative kinematics of the native knee including two-dimensional translation of the femur using a navigation system. Eight native knees of 4 fresh-frozen whole-body cadavers were used for the study. The kinematics of each knee were analyzed intraoperatively using the navigation system. Although anterior-posterior translation could not be assessed directly, it could be calculated using a formula derived from the parameters in the navigation system. The native knee showed external rotation of the femur in early knee flexion, transient internal rotation in mid flexion, and gradual external rotation in late flexion. There was no marked change in the coronal rotation angle of the mechanical axis during knee flexion. The femoral center moved anteriorly in early knee flexion and posteriorly in late flexion. The distance moved in the medial-lateral direction was relatively smaller than that in the anterior-posterior direction. Two-dimensional translation of the surgical epicondylar axis showed a medial pivot-like motion. In this cadaveric study, the kinematics of the native knee, including two-dimensional translation of the femur, could be satisfactorily assessed intraoperatively using a navigation system. The intraoperative kinematics of the knee can be analyzed in more detail using this methodology.

Purpose: Developmental dysplasia of the hip (DDH) presents a considerable surgical challenge in total hip arthroplasty (THA). Although the usefulness of computed tomography (CT)-based navigation in cup alignment has been reported, few reports have evaluated three-dimensional (3-D) cup positioning against the acetabulum specifically in patients with DDH. The purpose of this study was to evaluate the efficacy of a CT-based navigation system for alignment and spatial positioning of the cup in THA for patients with DDH. Methods: We reviewed 174 DDH THA cases in which CT-based navigation was used, and 75 cases in which a mechanical guide was used as a control group. Postoperative cup alignment and spatial positioning were evaluated by superimposition of a 3-D cup template onto the actual implanted cup using postoperative CT images, with pelvic coordinates matching the preoperative planning. Results: The proportion within the combined target zone (inclination and anteversion) was 97.7% in the navigation group and 61.3% in the non-navigation group. The mean absolute error between the intraoperative record and the postoperative measurement was 1.5° ± 1.3° for inclination and 2.1° ± 1.8° for anteversion in the navigation group. For acetabular cup positioning, the mean discrepancy between the preoperative planning and the postoperative measurements was 1.9+1.6 mm on the transverse axis, 2.8 ± 2.3 mm on the longitudinal axis, and 1.7 ± 1.3 mm on the sagittal axis. Conclusion: THA using a CT-based navigation system achieved quite high accuracy of cup alignment angles and spatial cup positioning in primary THA for patients with DDH.

Case. A 79-year-old woman with an extreme bone defect after failed cementless total hip arthroplasty underwent revision arthroplasty with a novel technique that involved cutting the anterior iliac bone and sliding it distally to reconstruct the anterior acetabular wall. A three-dimensional printed bone model enabled understanding the details of the bone defect. The clinical outcome at 3 years after surgery was favorable. Conclusion. The advantages of this technique are twofold, namely, stable fixation of the cup sandwiched between the anterior and posterior walls and reconstruction of the anterior wall using living bone, which allows bone ingrowth into the cup.

Here we present a case of pseudotumor following total hip arthroplasty (THA) that resulted in a circulatory disturbance caused by compression of the femoral vasculature. A 63-year-old man presented with pain, swelling, and redness of the left leg 5 years after primary metal-on-metal THA using the AML-Plus stem, Pinnacle® acetabular cup, and 36 mm diameter Ultamet™ metal head system (DePuy Orthopaedics, Warsaw, IN). Enhanced computed tomography and magnetic resonance imaging revealed a large cystic lesion extending from the left hip anteriorly to the intrapelvic region and compressing the left femoral vessels. Percutaneous puncture of the lesion yielded a dark red aspirate and the patient was diagnosed to have a pseudotumor causing compression of the femoral vessels. We performed revision surgery to replace the metal head and metal liner with a smaller ceramic head and polyethylene liner without removal of the stem. Corrosion of the head-neck junction was identified intraoperatively with no obvious wear on the bearing surfaces. The left leg swelling and redness improved immediately postoperatively. A large pseudotumor should be kept in mind as a cause of vascular compression with unilateral leg edema in a patient who has undergone metal-on-metal THA.

Two women aged 65 years and 78 years presented to our center with idiopathic necrosis of the talus. In both cases, imaging examinations showed collapse and sclerotic changes of the talar body caused by the necrosis. Both women underwent resection and placement of a third-generation custom-made alumina ceramic total talar prosthesis. Immobilization of the ankle in a short-leg cast for 3 weeks was followed by early rehabilitation. One year and 6 months after surgery, both women were able to walk without pain. Their Japanese Society for Surgery of the Foot ankle-hindfoot scale scores improved from 22 and 29/100 points to 90 and 95/100 points, respectively. To the best of our knowledge, the successful treatments of these two rare cases of idiopathic necrosis of the talus are among only a few reported cases of using a third-generation alumina ceramic prosthesis.

Ankle arthroscopy carries a lower risk of vascular complications when standard anterolateral and anteromedial portals are used. However, the thickness of the fat pad at the anterior ankle affords little protection for the thin-walled anterior tibial artery, rendering it susceptible to indirect damage during procedures performed on the anterior ankle joint. To our knowledge, only 11 cases of pseudoaneurysm involving the anterior tibial artery after ankle arthroscopy have been described in the literature. Here we reported a rare case of a 19-year-old soccer player who presented with pseudoaneurysm of the anterior tibial artery following ankle arthroscopy using an ankle distraction method and underwent anastomosis for the anterior tibial artery injury. Excessive distraction of the ankle puts the neurovascular structures at greater risk for iatrogenic injury of the anterior tibial artery during ankle arthroscopy. Surgeons should look carefully for postoperative ankle swelling and pain after ankle arthroscopy.

The type of bearing material that should be used in revision surgery after the failure of ceramic-on-ceramic total hip arthroplasty (THA) remains controversial. In the case of ceramic fracture, the residual ceramic particles can cause consequent metallosis when metal implants are used for revision THA. On the other hand, in the case of THA failure without ceramic fracture, revision THA with a metal femoral head provides satisfactory results. We report an unusual case of progressive osteolysis due to metallosis that developed after revision THA for ceramic liner dissociation without a liner fracture performed using a metal femoral head and polyethylene liner. The residual metal debris and abnormal pumping motion of the polyethylene liner due to the breakage of the locking system or the aspherical metal shell being abraded by the ceramic head seemed to be the cause of the progressive osteolysis.

A capital drop is a type of osteophyte at the inferomedial portion of the femoral head commonly observed in hip osteoarthritis (OA), secondary to developmental dysplasia. Capital drop itself is typically asymptomatic; however, symptoms can appear secondary to impinge against the acetabulum or to irritation of the surrounding tissues, such as nerves, vessels, and tendons. We present here a case of unilateral leg edema in a patient with hip OA, caused by a huge bone mass occurring at the inferomedial portion of the femoral head that compressed the femoral vessels. We diagnosed this bone mass as a capital drop secondary to hip OA after confirming that the mass occurred at least after the age of 63 years based on a previous X-ray. We performed early resection and total hip arthroplasty since the patient’s hip pain was due to both advanced hip OA and compression of the femoral vessels; moreover, we aimed to prevent venous thrombosis secondary to vascular compression considering the advanced age and the potent risk of thrombosis in the patient. A large capital drop should be considered as a cause of vascular compression in cases of unilateral leg edema in OA patients.

Periprosthetic fractures after total knee arthroplasty (TKA) present a clear management challenge, and retrograde intramedullary nails have recently gained widespread acceptance in treatment of these fractures. In two cases, we found a blocking screw technique, first reported by Krettek et al., was useful in the reduction of the fractures. Both patients attained preinjury mobility after intramedullary nailing. Moreover, we present a chart summarizing the notch designs of various femoral components because some prosthetic knee designs are not amenable to retrograde nailing. We hope this will be helpful in determining indications for retrograde nailing in periprosthetic fractures after TKA.

Total knee arthroplasty (TKA) for osteoarthritis (OA) patients with extra-articular deformity is still challenging because angular deformity, canal sclerosis, or the retained hardware that precludes the use of the traditional intramedullary guide. In addition, atypical bone cut for intra-articular correction leads to imbalanced soft tissue gap. Furthermore, corrective osteotomy should be considered for severe deformity or para-articular deformity cases. Recently, navigation-assisted TKA has been reported to increase the accuracy of prosthetic positioning and limb alignment. This system can calculate mechanical axis regardless of extra-articular deformity, canal sclerosis, or retained hardware. Accordingly, navigation surgery has been considered to be a powerful option especially in TKAs with extra-articular deformity cases. Here, we report 3 successful navigation-assisted TKAs for osteoarthritis with extra-articular deformities and/or retained hardware. Navigation-assisted TKA is an effective and reliable alternative for patients with extra-articular deformities.