84 results on '"Takamura, Masato"'
Search Results
2. Effect of surface area of grain boundaries on stress relaxation behavior in pure copper over wide range of grain sizes
3. Effects of Size and Distribution of Spheroidized Cementite on Void Initiation in the Punched Surface of Medium-Carbon Steel
4. 理研小型中性子源システムRANSプロジェクト
5. Time and flow stress dependences of internal stress during stress relaxation
6. Prospect for application of compact accelerator-based neutron source to neutron engineering diffraction
7. Experimental validation of cold neutron source performance with mesitylene moderator installed at RANS
8. Development of the neutron salt-meter RANS-μ for non-destructive inspection of concrete structure at on-site use
9. Editorial Proc. UCANS IX Online Conference, March 28–31, 2022
10. Sample-motion-synchronized neutron stroboscope at RANS
11. Optimization study of chlorine detection sensitivity in concrete based on prompt gamma analysis using 252Cf neutron source
12. Advanced Metal Forming Simulations Coupled with Neutron Beam Technology
13. RIKEN Compact Neutron Source Systems RANS Project.
14. Improvement of Neutron Diffraction at Compact Accelerator-driven Neutron Source RANS Using Peak Profile Deconvolution and Delayed Neutron Reduction for Stress Measurements
15. Prediction of the Stress Decreasing Behavior in the Early Stage of Stress Relaxation in Steel Sheet
16. Investigation of Dose Rate Distribution in an Experimental Hall of a RIKEN Accelerator-Driven Compact Neutron Source Based on the ⁹Be(p, n) Reaction With 7 MeV Proton Injection
17. Conceptual study of salt-meter with 252Cf neutron source for on-site inspection of bridge structure
18. Sample-motion-synchronized neutron stroboscope at RANS.
19. Experimental validation of cold neutron source performance with mesitylene moderator installed at RANS.
20. Development of the neutron salt-meter RANS-μ for non-destructive inspection of concrete structure at on-site use.
21. Prediction Method of Void Distribution near Punched Surface of Medium-Carbon Steel Sheet using Scrap
22. Investigation on the Plastic Strain Dependence of Dislocation Velocity Using Dislocation Velocity-Stress Exponent and Dislocation Velocity Coefficient
23. In-house texture measurement using a compact neutron source
24. Effect of Tool Modeling Accuracy on Sheet Metal Forming Simulation
25. Conceptual study of salt-meter with 252Cf neutron source for on-site inspection of bridge structure.
26. Determination Approach of Dislocation Density and Crystallite Size Using a Convolutional Multiple Whole Profile Software
27. Development of On-site Measurement Technique of Retained Austenite Volume Fraction by Compact Neutron Source RANS
28. Visualization of Water in Corroded Region of Painted Steels at a Compact Neutron Source
29. Finite Element Simulation for Shearing Process
30. The Influence of Strain Rate and Strain on the Behavior of Stress Relaxation in 980 MPa-Grade Dual Phase Steel Sheets
31. Reduction of Springback for Hat Channel with High-Strength Steel Sheets by Stroke-Returning Deep-Drawing Process
32. Editorial Proc. UCANS IX Online Conference, March 28–31, 2022.
33. Reduction of Springback in Hat Channel with High-Strength Steel Sheetby Stroke Returning Deep Drawing
34. Investigation on Effect of Slide Motion Control on Stamping of High Strength Steel Sheets
35. J042012 Study on Mechanical performance of Wave Shaped SMA Artificial Muscle : Theoretical Evaluation of Mechanical Deformation Behavior of SMA
36. Shearing Simulation with Ductile Fracture Criteria Using Elastoplastic Finite Element Method
37. J041044 FEM Simulation for Burring of SUS 304 Stainless Steel Pipe : A New Burring Process Using Pushing a Pin Tool
38. Computational Plasticity
39. Development of Complex Elements for 3D Elastoplastic FEM Analysis
40. Investigation on Twisting and Side Wall Opening Occurring in Curved Hat Channel Products Made of High Strength Steel Sheets
41. Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces
42. Mechanical Simulation from Measured Data
43. Effect of Tool-Modeling Accuracy on Square-Cup Deep-Drawing Simulation
44. Effect of Tool Modeling Accuracy on Square Cup Deep-Drawing Simulation
45. Sheet Forming Simulation Using Static Explicit FEM Program Coupled with Elastic Deformation of Tools
46. Development of Total Simulation System for Sheet Metal Forming Parts
47. Formulation of Contact Problems in Sheet Metal Forming Simulation Using Local Interpolation for Tool Surfaces
48. Effect of Force Correction Algorithm Arising from Change of Tool Normal on Sheet Metal Forming Simulation
49. Development of new algorithm for change of tool normal suitable for rigid tools
50. Sheet Forming Simulation Using Static FEM Program Coupled with Elastic Deformation of Tools
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.