Search

To facilitate water splitting using MoSe 2 as a light absorber, we fabricated water-dispersible MoSe 2 /C 60 -dendron nanohybrids via physical modification of the basal plane of MoSe 2 . Upon photoirradiation, the mixed-dimension MoSe 2 /C 60 (2D/0D) heterojunction generates a charge-separated state (MoSe 2 ⋅ + /C 60 ⋅ - ) through electron extraction from the exciton in MoSe 2 to C 60 . This process is followed by the hydrogen evolution reaction (HER) from water in the presence of a sacrificial donor (1-benzyl-1,4-dihydronicotinamide) and co-catalyst (Pt-PVP). The apparent quantum yields of the HER were estimated to be 0.06 % and 0.27 % upon photoexcitation at the A- and B-exciton absorption peaks (λ max =800 and 700 nm), respectively., (© 2024 The Author(s). Chemistry - A European Journal published by Wiley-VCH GmbH.)

Multidisciplinary therapy centered on radical surgery for resectable pancreatic cancer is expected to prolong prognosis, but relies on CA19-9 biomarker levels to determine treatment strategy. Boron neutron capture therapy (BNCT) is a chemoradiotherapy using tumor hyperaccumulator boron drugs and neutron irradiation. The purpose of this study is to investigate novel boron drug agents for BNCT for pancreatic cancer. Bioinformatics was used to evaluate the uptake of current boron amino acid (BPA) drugs for BNCT into pancreatic cancer. The expression of the amino acid transporter LAT1, a BPA uptake transporter, was low in pancreatic cancer and even lower in high CA19-9 pancreatic cancer. In contrast, the glucose transporter was high in high CA19-9 pancreatic cancers and inversely correlated with LAT1 expression. Considering the low EPR effect in pancreatic cancer, we synthesized a small molecule Glucose-BSH, which is boron BSH bound to glucose, and confirmed its specific uptake in pancreatic cancer. uptake of Glucose-BSH was confirmed in an environment compatible with the tumor microenvironment. The therapeutic efficacy and safety of Glucose-BSH by therapeutic neutron irradiation were confirmed with BNCT. We report Glucose-BSH boron drug discovery study of a Precision Medicine BNCT with application to high CA19-9 pancreatic cancer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. All of author have no C.O.I., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Titanium dioxide doped with Pt(IV) ions was synthesized via a sol-gel method, incorporating a sol purification process through dialysis. The doped Pt(IV) ions were reduced by UV light irradiation to obtain a transparent Pt-TiO 2 sol, with Pt(0) acting as a cocatalyst for hydrogen evolution. The hydrogen evolution activity of Pt-TiO 2 sol was evaluated under UV light irradiation using methanol as a sacrificial reagent. 0.05 atom % Pt-TiO 2 sol remained in the sol state without precipitation after 10 h of UV light irradiation. The amount of hydrogen produced after 10 h of light irradiation was 1195 μmol, with a turnover number (TON) of 664.1, a turnover frequency (TOF) of 66.4 h -1 , and an apparent quantum yield (AQY) of 0.86%. The sol-gel synthesis from the molecular level is thought to result in Pt ions being doped inside the TiO 2 particles, maintaining high dispersibility by suppressing particle growth due to the aggregation of Pt(0) during the UV reduction of Pt(IV) ions. These results show that the Pt-TiO 2 photocatalyst has a high renewable energy factor because it can be synthesized at room temperature, and the aggregation of Pt-TiO 2 particles is suppressed by making full use of a sol-gel method., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Single-walled carbon nanotube (SWCNT)/TiO2 hybrids were synthesized using 1,10-bis(decyloxy)decane-core PAMAM dendrimer as a molecular glue. Upon photoirradiation of a water dispersion of SWCNT/TiO2 hybrids with visible light (λ > 422 nm), the hydrogen evolution reaction proceeded at a rate of 0.95 mmol/h·g in the presence of a sacrificial agent (1-benzyl-1,4-dihydronicotinamide, BNAH). External quantum yields (EQYs) of the hydrogen production reaction photosensitized by (6,5), (7,5), and (8,3) tubes were estimated to be 5.5%, 3.6%, and 2.2%, respectively, using monochromatic lights corresponding to their E22 absorptions (570 nm, 650 nm, and 680 nm). This order of EQYs (i.e., (6,5) > (7,5) > (8,3)SWCNTs) exhibited the dependence on the C2 energy level of SWCNT for EQY and proved the hot electron extraction pathway.

Controlling the direction of exciton-energy flow in two-dimensional (2D) semiconductors is crucial for developing future high-speed optoelectronic devices using excitons as the information carriers. However, intrinsic exciton diffusion in conventional 2D semiconductors is omnidirectional, and efficient exciton-energy transport in a specific direction is difficult to achieve. Here we demonstrate directional exciton-energy transport across the interface in tungsten diselenide (WSe 2 )-molybdenum diselenide (MoSe 2 ) lateral heterostructures. Unidirectional transport is spontaneously driven by the built-in asymmetry of the exciton-energy landscape with respect to the heterojunction interface. At excitation positions close to the interface, the exciton photoluminescence (PL) intensity was substantially decreased in the WSe 2 region and enhanced in the MoSe 2 region. In PL excitation spectroscopy, it was confirmed that the observed phenomenon arises from lateral exciton-energy transport from WSe 2 to MoSe 2 . This directional exciton-energy flow in lateral 2D heterostructures can be exploited in future optoelectronic devices.

Room-temperature chiral light sources whose optical helicity can be electrically switched are one of the most important devices for future optical quantum information processing. The emerging valley degree of freedom in monolayer semiconductors allows generation of chiral luminescence via valley polarization. However, relevant valley-polarized light-emitting diodes (LEDs) have only been achieved at low temperatures (typically below 80 K). Here, a room-temperature chiral LED with strained transition metal dichalcogenide monolayers is realized. Spatially resolved polarization spectroscopy reveals that strain effects are crucial to yielding robust valley-polarized electroluminescence. The broken threefold rotational symmetry of strained monolayers induce inequivalent valley drifts at the K/K' valleys, resulting in different amounts of spin recombination driven by electric fields. Based on this scenario, ideally strained conditions are designed for LEDs on flexible substrates, in which the helicity of room-temperature valley-polarized electroluminescence is electrically tuned. The results provide a new pathway for practical chiral light sources based on monolayer semiconductors., (© 2021 Wiley-VCH GmbH.)

Emerging transition metal dichalcogenides (TMDCs) offer an attractive platform for investigating functional light-emitting devices, such as flexible devices, quantum and chiral devices, high-performance optical modulators, and ultralow threshold lasers. In these devices, the key operation is to control the light-emitting position, that is, the spatial position of the recombination zone to generate electroluminescence, which permits precise light guides/passes/confinement to ensure favorable device performance. Although various structures of TMDC light-emitting devices have been demonstrated, including the transistor configuration and heterostructured diodes, it is still difficult to tune the light-emitting position precisely owing to the structural device complexity. In this study, we fabricated two-terminal light-emitting devices with chemically synthesized WSe 2 , MoSe 2 , and WS 2 monolayers, and performed direct observations of their electroluminescence, from which we discovered a divergence in their light-emitting positions. Subsequently, we propose a method to associate spatial electroluminescence imaging with transport properties among different samples; consequently, a common rule for determining the locations of recombination zones is revealed. Owing to dynamic carrier accumulations and p-i-n junction formations, the light-emitting positions in electrolyte-based devices can be tuned continuously. The proposed method will expand the device applicability for designing functional optoelectronic applications based on TMDCs.

High-harmonic generation in solids is a unique tool to investigate the electron dynamics in strong light fields. The systematic study in monolayer materials is required to deepen the insight into the fundamental mechanism of high-harmonic generation. Here we demonstrated nonperturbative high harmonics up to 18th order in monolayer transition metal dichalcogenides. We found the enhancement in the even-order high harmonics which is attributed to the resonance to the band nesting energy. The symmetry analysis shows that the valley polarization and anisotropic band structure lead to polarization of the high-harmonic radiation. The calculation based on the three-step model in solids revealed that the electron-hole polarization driven to the band nesting region should contribute to the high harmonic radiation, where the electrons and holes generated at neighboring lattice sites are taken into account. Our findings open the way for attosecond science with monolayer materials having widely tunable electronic structures.

The thermally and photolytically induced disproportionation of 6,13-dihydropentacene derivatives into tetrahydropentacenes and pentacenes results in unique solid-state fluorescence. The fluorescence thereby depends on the molecular structure and the molecular arrangement in the solid state., Competing Interests: The authors declare no conflicts of interest., (This journal is © The Royal Society of Chemistry.)

Dye-encapsulated single-walled carbon nanotubes (SWCNTs) were employed for the construction of a coaxial three-component dye/SWCNT/C 60 heterojunction. Despite the larger diameter (∼1.4 nm) of the SWCNTs relative to that set by Flavel's rule (0.95 nm), the photoinduced electron transfer from dye-encapsulated SWCNTs to C 60 proceeded smoothly, resulting in the photosensitized evolution of H 2 from H 2 O using a ferrocenyl-based photosensitizer, which was confirmed by the action spectra.

To observe a clear-cut example of the formation of mobile carriers from excitons on semiconducting single-walled carbon nanotubes (s-SWCNTs) surrounded by a medium with a high dielectric constant, water-dispersible s-SWCNT nanocomposites were fabricated by physical modifications using poly(amidoamine) dendrimers that contain an aliphatic core. The evolution of H 2 from water using these s-SWCNT/dendrimer nanocomposites as photosensitizers under irradiation with visible light demonstrated a photo-induced electron transfer from the s-SWCNTs to the co-catalysts.

Single-walled carbon nanotubes (SWCNTs) are potentially strong optical absorbers with tunable absorption bands depending on their chiral indices (n, m). Their application for solar energy conversion is difficult because of the large binding energy (>100 meV) of electron-hole pairs, known as excitons, produced by optical absorption. Recent development of photovoltaic devices based on SWCNTs as light-absorbing components have shown that the creation of heterojunctions by pairing chirality-controlled SWCNTs with C 60 is the key for high power conversion efficiency. In contrast to thin film devices, photocatalytic reactions in a dispersion/solution system triggered by the photoexcitation of SWCNTs have never been reported due to the difficulty of the construction of a well-ordered surface on SWCNTs. Here, we show a clear-cut example of a SWCNT photocatalyst producing H 2 from water. Self-organization of a fullerodendron on the SWCNT core affords water-dispersible coaxial nanowires possessing SWCNT/C 60 heterojunctions, of which a dendron shell can act as support of a co-catalyst for H 2 evolution. Because the band offset between the LUMO levels of (8, 3)SWCNT and C 60 satisfactorily exceeds the exciton binding energy to allow efficient exciton dissociation, the (8, 3)SWCNT/fullerodendron coaxial photocatalyst shows H 2 -evolving activity (QY = 0.015) upon 680-nm illumination, which is E 22 absorption of (8, 3) SWCNT.

A new phenacene-type molecule, [8]phenacene, which is an extended zigzag chain of coplanar fused benzene rings, has been synthesised for use in an organic field-effect transistor (FET). The molecule consists of a phenacene core of eight benzene rings, which has a lengthy π-conjugated system. The structure was verified by elemental analysis, solid-state NMR, X-ray diffraction (XRD) pattern, absorption spectrum and photoelectron yield spectroscopy (PYS). This type of molecule is quite interesting, not only as pure chemistry but also for its potential electronics applications. Here we report the physical properties of [8]phenacene and its FET application. An [8]phenacene thin-film FET fabricated with an SiO2 gate dielectric showed clear p-channel characteristics. The highest μ achieved in an [8]phenacene thin-film FET with an SiO2 gate dielectric is 1.74 cm(2) V(-1) s(-1), demonstrating excellent FET characteristics; the average μ was evaluated as 1.2(3) cm(2) V(-1) s(-1). The μ value in the [8]phenacene electric-double-layer FET reached 16.4 cm(2) V(-1) s(-1), which is the highest reported in EDL FETs based on phenacene-type molecules; the average μ was evaluated as 8(5) cm(2) V(-1) s(-1). The μ values recorded in this study show that [8]phenacene is a promising molecule for transistor applications.

A coaxial nanohybrid consisting of a single-walled carbon nanotube (SWCNT), fullerodendron, and SiO(2) shows high-efficiency light-driven hydrogen evolution from water. Upon visible light irradiation, SWCNT/fullerodendron/SiO(2) coaxial nanohybrid shows hydrogen evolution activity in the presence of methyl viologen (MV(2+)), benzyldihydronicotinamide (BNAH), and a colloidal polyvinyl alcohol(PVA)-Pt., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new poly(amidoamine) dendron having 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) at the focal point was synthesized. Interestingly, formation of zwitterionic fullerodendrons (λ(max) = 930 nm for C(60) and 795 nm for C(70)) were observed by Vis-NIR spectroscopy upon the reaction of C(60) or C(70) with the DBN-focal dendron. In particular, the C(70) anion was effectively stabilized by the site isolation effect of the dendritic wedge. The half-life of fullerodendron 12b having C(70) anion at the focal point reaches 7,345 min, which is 20 times longer than that of complex between C(60) and pristine DBN. Furthermore, in order to confirm the structure of the zwitterionic complex, fullerodendron 12a was reprecipitated from benzonitrile/1,2,4-trimethylbenzene, and was observed using IR spectroscopy and APPI-MS.

A newly designed anthracene derivative having gluconamides at its peripheral branches formed a photo-responsive hydrogel. SEM observation of the xerogel showed a network structure consisting of fibrils. Upon photoirradiation (lambda >300 nm) of the hydrogel, regioselective photodimerization of the anthracene moiety occurred to give head-to-tail photodimers and the physical state changed from the gel to the sol.

4,5-Bis(benzylthio)-3,6-diethylphthalonitrile (1) was mixed with 4 -t-butylphthalonitrile and then treated with lithium alkoxide in n-hexanol to produce the corresponding unsymmetrically substituted phthalocyanines (2) and (3) with two or four benzylthio groups, respectively. Treatment of phthalocyanine (2) with nickel(II) acetate yielded the corresponding metal complex 2-Ni. Two benzyl groups of 2 and 2-Ni were removed with lithium/THF/ammonia at -78 degrees C under argon, and the dithiolate anions generated were then reacted with elemental sulfur to give monotrithiolophthalocyanines (5) and (5-Ni). A similar treatment of 3 produced bistrithiolophthalocyanine (6). Tetrakistrithiolophthalocyanine (7-Ni) was prepared by complexation of phthalocyanine (4) with nickel(II) acetate, followed by a Birch reduction of the resulting nickel(II) complex (4-Ni), and then sulfurization and cyclization of the octathiolate anions that were generated. The structures of the phthalocyanines were determined by (1)H NMR and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The optical and electrochemical properties of the phthalocyanines were examined by UV-vis absorption spectroscopy and cyclic voltammetry. Treatment of 5, 5-Ni, 6, 7, and 7-Ni with trifluoroacetic acid in chloroform generated positively charged species, which were characterized by UV-vis and/or NMR spectroscopy.

A new Cd10S16 molecular cluster dendrimer has been prepared and characterized; photooxygenation reaction using the molecular cluster dendrimer as a photosensitizer was successful.

Photoinduced charge separation of fullerodendrimers with carboxylates at terminal sites (C60 approximately COO-) has been found in aqueous media. Time-resolved transient absorption and fluorescence measurements of the fullerodendrimers demonstrated that charge separation takes place from the terminal carboxylate anion to the central excited singlet state of C60, generating C60*- approximately COO* with high quantum efficiency in aqueous solution. In the presence of viologen dication and a sacrificial donor, the persistent viologen radical cation was generated.

Benzo[1,2,3]trichalcogenoles with two bromine atoms on the benzene ring, 5,6-dibromo-4,7-diethylbenzo[1,2,3]trichalcogenoles (1a) and (1b) (chalcogen: 1a = S; 1b = Se), were first prepared by treating 2,3,5,6-tetrabromo-1,4-diethylbenzene (TBDEB) with elemental sulfur or amorphous selenium in DBU at 140 degrees C (for 1a) and 100 degrees C (for 1b) for 24 h. The structures of 1a and 1b were verified by NMR spectroscopy, mass spectrometry, and elemental analysis. X-ray crystallographic analysis ultimately showed that the substitution reactions of TBDEB proceeded at the two adjacent bromine atoms. To apply 1a and 1b to construction of phthalocyanine derivatives with sulfur or selenium functional groups, 4,5-bis(benzylchalcogeno)-3,6-diethylphthalonitriles (5a) and (5b) as key intermediates were prepared by way of introduction of alkyl groups (2-cyanoethyl or 4-nitrophenethyl groups) on two chalcogen atoms, substitution of two bromine atoms with nitrile groups, and subsequent exchange of alkyl groups with benzyl groups. Compound 5a was treated with lithium in n-pentanol at 100 degrees C for 1 h to produce 2,3,9,10,16,17,23,24-octakis(benzylthio)-1,4,8,11,15,18,22,25-octaethylphthalocyanine (6a). A similar treatment of 5b in n-hexanol at 100 degrees C for 2 h gave phthalocyanine 6b. The structures of 6a and 6b were determined by (1)H NMR spectroscopy and MALDI-TOFMS. X-ray crystallographic analysis of 6a was also performed. The Q-band absorptions (lambda(max)) for 6a and 6b in UV-vis spectra were observed at 755 nm (log epsilon = 5.1) and 757 nm (log epsilon = 5.1), respectively, and their electrochemical properties were verified by cyclic voltammetry in dichloromethane with Ag/AgNO(3) as a reference electrode. Compounds 6a and 6b were further treated with lithium in THF/NH(3) at -78 degrees C and then with dibutyltin dichloride to produce phthalocyanine derivatives 8a and 8b with four dichalcogenastannole rings by way of octachalcogenate phthalocyanines 7a and 7b.

Autoxidation of the phosphonate carbanions derived from 9-phosphono-10-hydroacridanes provided chemiluminescence ascribed to the excited acridone anion. The intramolecular CIEEL (chemically initiated electron exchange luminescence) mechanism can be applied to this chemiluminescence because of the much higher emission efficiency compared to that of 9-phosphono-10-methylacridanes. The effect of the phosphonate substituents on the emission efficiency and especially on the rates of the chemiluminescence decay can be interpreted to originate from the valence deviation of the phosphorus atoms, which is connected with the substituent effect on the geometrical selectivity in the olefination reaction of the phosphonate carbanions. The enhanced chemiluminescence in the presence of the fluorophores was also detected in autoxidation of the carbanions of diethyl diphenylmethylphosphonate and fluorenylphosphonate. Although the evidence is circumstantial, these results strongly support the belief that phospha-1,2-dioxetane is the most likely high-energy intermediate generating the excited molecules.

A kinetic study of peroxyoxalate chemiluminescence reactions employing 2,4,6-trichlorophenyl N-aryl-N-tosyloxamates supports the 1,2-dioxetanones still bearing the eliminating group as the key intermediates that interact with the fluorophores rather than 1,2-dioxetanedione.

The title compound N,N'-bistosyl-1H,4H-quinoxaline-2,3-dione (TsQD) provides peroxyoxalate chemiluminescence (PO-CL) when reacted with hydrogen peroxide in the presence of fluorophores. The chemiluminescence (CL) efficiency of TsQD was superior to that of other related compounds such as bis(2,4,6-trichlorophenyl) oxalate (TCPO), a typical oxalate for the peroxyoxalate PO-CL, under an aqueous condition. Factors affecting the PO-CL efficiency are discussed from the viewpoint of the structures of the substrates and the electronic nature of the fluorophores. A linear correlation of the logarithmic values evaluated from the CL quantum yields with the oxidation potentials of the aromatic fluorophores supports the involvement of the chemically initiated electron exchange luminescence (CIEEL) mechanism in both TsQD- and TCPO-CL systems. Also, an excellent Hammett relationship was derived from the correlation between the sigma(+) values and the relative singlet excitation yields in TsQD-CL enhanced by a series of fluorescent para,para'-disubstituted distyrylbenzenes.