Search

We prepared block copolymers of (2-ethoxy)ethoxyethyl vinyl ether (EOEOVE) and octadecyl vinyl ether (ODVE) with the number average molecular weights of 6900, 9300, and 16 700 by living cationic polymerization. The poly(EOEOVE) block acts as a temperature-sensitive moiety, and the poly(ODVE) block acts as an anchor moiety. We also investigated the effect of chain length of the copolymer poly(EOEOVE) block on the ability to sensitize liposomes. The copolymers underwent a coil−globule transition at ~36 °C in the presence of a membrane of egg yolk phosphatidylcholine (EYPC), detected using differential scanning calorimetry (DSC). Liposomes encapsulating calcein, a water-soluble fluorescent dye, were prepared from mixtures of dioleoylphosphatidylethanolamine, EYPC, and the copolymers. While the copolymer-modified liposomes released little calcein below 30 °C, release was enhanced above 35 °C, indicating that dehydrated copolymer chains destabilized the liposome membrane. In addition, copolymers with a longer poly(EOEOVE) block induced a more drastic enhancement of contents release in a narrow temperature region near the transition temperature of the poly(EOEOVE) block. As a result, the copolymer with an average molecular weight of 16 700 generated highly sensitive liposomes that produced rapid and dramatic release of the contents in response to temperature.

We designed poly(amidoamine) dendrimers with phenylalanine or leucine residues at their chain ends. Thereby, we achieved efficient gene transfection of cells through synergy of the proton sponge effect, which is induced by the internal tertiary amines of the dendrimer, and hydrophobic interaction by the hydrophobic amino acid residues in the dendrimer periphery. Dendrimers having 16, 29, 46, and 64 terminal phenylalanine residues were prepared by the reaction of the amine-terminated poly(amidoamine) G4 dendrimer and l-phenylalanine using condensing reagent 1,3-dicyclohexylcarbodiimide. Transfection activity of these phenylalanine-modified dendrimers for CV1 cells, an African green monkey kidney cell line, increased concomitant with the increasing number of the terminal phenylalanine residues, except for the dendrimer with 64 phenylalanine residues, which showed poor water solubility and hardly formed a complex with DNA at neutral pH. However, under weakly acidic conditions, the dendrimer with 64 phenylalanine residues formed a complex with DNA, thereby achieving highly efficient transfection. In contrast, the attachment of l-leucine residues was unable to improve the transfection activity of the parent dendrimer, probably because of the relatively lower hydrophobicity of this amino acid. The phenylalanine-modified dendrimer exhibited a higher transfection activity and a lower cytotoxicity than some widely used transfection reagents. For that reason, the phenylalanine-modified dendrimers are considered to be promising gene carriers.

Three kinds of copolymers of N-isopropylacrylamide (NIPAM) with the same conformational transition temperature and varying transition endotherms were synthesized with N-acryloylpyrrolidine (APr), N,N-dimethylacrylamide (DMAM), and N-isopropylmethacrylamide (NIPMAM) as the comonomers. Two dodecyl groups were incorporated into the termini of these copolymers as an anchor for the fixation to a liposomal membrane. Egg yolk phosphatidylcholine liposomes having these copolymers were prepared and their temperature-sensitive contents release and association properties were investigated. While these copolymer exhibited a conformational transition at ca. 40 °C, ΔH for the transition increased in the order of poly(APr-co-NIPAM) < poly(DMAM-co-NIPAM) < poly(NIPMAM-co-NIPAM). The liposomes containing poly(NIPMAM-co-NIPAM) showed a drastic release enhancement of entrapped calcein above the transition temperature, whereas the liposomes with poly(DMAM-co-NIPAM) and those with poly(APr-co-NIPAM) exhibited moderate and slight enhancement of calcein release above that temperature, respectively. On the contrary, the liposomes containing poly(APr-co-NIPAM) showed significant aggregation above the transition temperature, but the aggregation was hardly observed for the liposomes having poly(NIPMAM-co-NIPAM), indicating that poly(APr-co-NIPAM) more efficiently made the liposome surface hydrophobic. Thus, we concluded that the copolymer with a large ΔH is suitable for obtaining functional liposomes with a temperature-sensitive contents release property, whereas the copolymer with a small ΔH is appropriate for preparing functional liposomes with a temperature-sensitive surface property.

We designed a novel type of cationic lipid, lipids with a cationic polar group in the polyamidoamine dendron, because these dendron-bearing lipids are expected to form complexes with plasmid DNA and achieve efficient transfection of cells by synergy of endosome buffering and membrane fusion with the endosome, both of which are useful for the promotion of the transfer of plasmid DNA from endosome to cytosol. Four kinds of lipids with polyamidoamine dendrons of first to fourth generations, DL-G1, DL-G2, DL-G3, and DL-G4, were synthesized. The lipid with a dendron of a higher generation exhibited greater ability to form lipoplexes with plasmid DNA, as estimated by agarose gel electrophoresis. While the DL-G1 lipoplex did not transfect CV1 cells, the lipoplexes containing the DL-G2, DL-G3, or DL-G4 could induce transfection of the cells, and their activity was elevated with increasing generation of the dendron. Addition of dioleoylphosphatidylethanolamine (DOPE), which is known to increase fusion ability of a lipid membrane, into the lipoplexes greatly enhanced their transfection activity. In addition, the comparison with DC-Chol-containing lipoplex, which is widely used as a nonviral vector, showed that the DL-G3−DOPE lipoplex exhibits more efficient transfections. These findings imply that these dendron-bearing lipids may form the basis for a novel family of cationic lipids for efficient gene delivery.

Polyamidoamine dendrimers having poly(ethylene glycol) grafts were designed as a novel drug carrier which possesses an interior for the encapsulation of drugs and a biocompatible surface. Poly(ethylene glycol) monomethyl ether with the average molecular weight of 550 or 2000 was combined to essentially every chain end of the dendrimer of the third or fourth generation via urethane bond. The poly(ethylene glycol)-attached dendrimers encapsulating anticancer drugs, adriamycin and methotrexate, were prepared by extraction with chloroform from mixtures of the poly(ethylene glycol)-attached dendrimers and varying amounts of the drugs. Their ability to encapsulate these drugs increased with increasing dendrimer generation and chain length of poly(ethylene glycol) grafts. Among the poly(ethylene glycol)-attached dendrimers prepared, the highest ability was achieved by the dendrimer of the fourth generation having the poly(ethylene glycol) grafts with the average molecular weight of 2000, which could retain 6.5 adriamycin molecules or 26 methotrexate molecules/dendrimer molecule. The methotrexate-loaded poly(ethylene glycol)-attached dendrimers released the drug slowly in an aqueous solution of low ionic strength. However, in isotonic solutions, methotrexate and adriamycin were readily released from the poly(ethylene glycol)-attached dendrimers.

To obtain liposomes which release the contents in response to ambient temperature, liposomes modified with copolymers of N-isopropylacrylamide with varying lower critical solution temperatures have been designed. Poly(N-isopropylacrylamide-co-acrylamide)s with various compositions were synthesized by free-radical copolymerization. The lower critical solution temperature of the polymer increased with increasing acrylamide content in the polymer. Poly(N-isopropylacrylamide-co-acrylamide-co-N,N-didodecylacrylamide)s were also prepared via the same method as the thermosensitive polymers having anchor groups to the liposome membrane. Calcein-loaded dioleoylphosphatidylethanolamine/egg yolk phosphatidylcholine (6:4, w/w) liposomes were coated with these polymers by incubating the liposomes with aqueous solutions of the polymers. The liposomes hardly released the contents below the lower critical solution temperature of the polymer, but the release was greatly enhanced above that temperature. The liposomes were also made from a mixture of the same lipids and the polymer. The liposome revealed a more drastic release property than the liposomes prepared by the incubation with the polymer solution, because the polymer chains were bound on both surfaces of the membrane. The close relationship between lower critical solution temperatures of the polymers and temperature regions where enhancement of the release from the polymer-fixed liposomes demonstrates that the release was triggered by alteration of the polymers from a hydrophilic state to a hydrophobic state occurring at their lower critical solution temperatures.

Novel temperature-sensitive liposomes having surface properties that can be controlled by temperature were designed as liposomes coated with poly(N-isopropylacrylamide), which exhibits a hydrated coil to dehydrated globule transition at ca. 32 °C. To obtain the polymer with anchoring groups to the liposome, a copolymer of N-isopropylacrylamide and octadecyl acrylate (99:1, mol/mol) was synthesized by radical copolymerization. The copolymer revealed the transition near 30 °C. Liposomes made from various phospholipids were prepared by sonication and coated with the copolymer. When dipalmitoylphosphatidylcholine and distearoylphosphatidylcholine were used as liposome lipids, remarkable aggregation and fusion of the copolymer-modified liposomes took place between the transition temperature of the copolymer and the gel−liquid-crystalline transition temperature (Tc) of the lipid membranes. However, above the Tc, association between the liposomes was much less significant, although the copolymer is still hydrophobic. In the case of the copolymer-modified dilauroylphosphatidylcholine liposome, the membrane of which takes on a liquid-crystalline state under the experimental conditions, association between the liposomes also hardly occurred even when the copolymer became hydrophobic. On the other hand, below the transition temperature of the copolymer, the copolymer-modified liposomes were very stable and aggregation of the liposomes was not observed, irrespective of membrane lipid. Results obtained in this study demonstrate that the copolymer chains fixed on the surface of the liposome with a solid membrane promote aggregation and fusion of the liposomes by hydrophobic interactions between the copolymer chains and/or between the copolymer chains and the liposome membranes above the transition temperature of the copolymer.

The article describes the design of a prototype machine developed for continuous enzymatic bio-scouring of cotton fibers. The prototype machine, which measures 15. 7 m in length, 3. 7 m in width and 3.8 m in height, consists of a pricker, enzyme bath, timing scray, wet frictioning, washing and folding. Moreover, the authors investigated the performance of the machine when used in actual scouring, including the effects of enzymatic concentration, pH, temperature and speed in scouring. Also determined is the optimum conditions for continuous bio-scouring as well as the scouring processes, including the percentage of water absorbency and pectin removal, using the prototype machine.