Search

Nonspecific viral adsorption by polymer nanoparticles is more economical and superior in terms of operating cost and energy efficiency than viral adsorption using virus-specific antibodies and filtration techniques involving size exclusion in the order of tens of nanometres. In this study, we synthesised four types of polycyclic aromatic polymer (ArP) nanoparticles with different structures and evaluated their virus adsorption capability for infectious particles of the newly emerged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). ArP nanoparticles with a diameter of approximately 500 nm were prepared by one-pot precipitation polymerisation using structural isomers of bifunctional dihydroxynaphthalene (1,5-dihydroxynaphthalene and 2,6-dihydroxynaphthalene) as phenol monomers, as well as 3-hydroxybenzoic acid and 3-aminophenol as comonomers to introduce carboxylic acid and amino groups, respectively. This wide range of phenolic monomers offers a powerful molecular design capability, enabling the optimisation of surface properties for the adsorption of various infectious virus particles. The virus adsorption capacity of the ArP nanoparticles exceeded 20 000 plaque-forming units and was found to be correlated with the nitrogen (primary and secondary amines) and quinone contents on the ArP nanoparticle surface. Furthermore, a polyvinylidene difluoride membrane filter uniformly coated with the ArP nanoparticles could remove viruses by filtration in a flow system. [ABSTRACT FROM AUTHOR]

This paper introduces a novel contactless single-chip detector that utilizes impedance-to-digital conversion technology to measure impedance in the microfluidic channel or capillary format analytical device. The detector is designed to operate similarly to capacitively coupled contactless conductivity detectors for capillary electrophoresis or chromatography but with the added capability of performing frequency sweeps up to 200 kHz. At each recorded data point, impedance and phase-shift data can be extracted, which can be used to generate impedance versus frequency plots, or phase-shift versus frequency plots. Real and imaginary parts can also be calculated from the data, allowing for the generation of Nyquist diagrams. This detector represents the first of its kind in the contactless conductivity class to provide spectrum-type data, as demonstrated in capillary electrophoresis experiments. [ABSTRACT FROM AUTHOR]

Hydrogels composed of natural and synthetic polymers have considerable potential for use in diverse areas such as biomedical applications and water purification. This is primarily because of their biocompatibility, biodegradability, and low toxicity. The widespread usage of composite hydrogels is hindered by a lack of simultaneous properties, such as high strength and low swelling rate. Herein, we report the preparation of novel hydrogels composed of polyvinyl alcohol (PVA)–intercalated agar polymer networks physically crosslinked with tannic acid. The hydrogel was subjected to multiple freeze/thaw (F/T) cycles (1, 3, and 5), and it was found to exhibit the highest strength after 5 F/T cycles. After 1 F/T cycle, the tensile strength of the composite hydrogel reached 1.56 MPa with a 1.0 wt% crosslinker, whereas after 5 F/T cycles, it increased to 3.77 MPa with a reduced amount (0.75 wt%) of the crosslinker. In addition, the swelling ability decreased upon increasing the crosslinker content and number of F/T cycles. Furthermore, the hydrogel demonstrated excellent water retention and a strong ability to adhere to different substrates. We have successfully implemented an innovative approach to improve the mechanical properties of PVA-based hydrogels by combining the use of tannic acid as a cross-linking agent and multiple F/T cycles. The developed hydrogels are expected to facilitate new developments in hydrogel technology, thus impacting diverse fields such as biomedical (wound dressing and artificial cartilage). [ABSTRACT FROM AUTHOR]