Search

Les stations d’épuration sont des systèmes dynamiques, soumis à d’importantes variations temporelles. La modélisation de leur fonctionnement, qui consiste à représenter mathématiquement l’évolution dans le temps de variables d’intérêt représentant les phénomènes biologiques, physiques et chimiques qui se déroulent dans les ouvrages, est utilisée pour mieux comprendre les processus mis en jeu et optimiser le traitement des eaux résiduaires.. Focus sur les activités du groupe de travail Good Modelling Practice de l’IWA, auquel participe activement les équipes d’Irstea, notamment dans l’élaboration d’un protocole pour l’utilisation des modèles de boues activées en pratique.

This study demonstrates the potential of an innovative anaerobic treatment technology for municipal biosolids (IntensiCarb), which relies on vacuum evaporation to decouple solids and hydraulic retention times (SRT and HRT). We present proof-of-concept experiments using primary sludge and thickened waste activated sludge (50-50 v/v mixture) as feed for fermentation and carbon upgrading with the IntensiCarb unit. IntensiCarb fully decoupled the HRT and SRT in continuously stirred anaerobic reactors (CSAR) to achieve two intensification factors, that is, 1.3 and 2, while keeping the SRT constant at 3 days (including in the control fermenter). The intensified CSARs were compared to a conventional control system to determine the yields of particulate hydrolysis, VFA production, and nitrogen partitioning between fermentate and condensate. The intensified CSAR operating at an intensification factor 2 achieved a 65% improvement in particulate solubilization. Almost 50% of total ammonia was extracted without pH adjustment, while carbon was retained in the fermentate. Based on these results, the IntensiCarb technology allows water resource recovery facilities to achieve a high degree of plant-wide intensification while partitioning nutrients into different streams and thickening solids. PRACTITIONER POINTS: The IntensiCarb reactor can decouple hydraulic (HRT) and solids (SRT) retention times in anaerobic systems while also increasing particulate hydrolysis and overall plant capacity. Using vacuum as driving force of the IntensiCarb technology, the system could achieve thickening, digestion, and partial dewatering in the same unit-thus eliminating the complexity of multi-stage biosolids treatment lines. The ability to partition nutrients between particulate, fermentate, and condensate assigns to the IntensiCarb unit a key role in recovery strategies for value-added products such as nitrogen, phosphorus, and carbon, which can be recovered separately and independently.

The implementation of carbon capture technologies such as high-rate activated sludge (HRAS) systems are gaining interests in water resource and recovery facilities (WRRFs) to minimize carbon oxidation and maximize organic carbon recovery and methane potential through biosorption of biodegradable organics into the biomass. Existing activated sludge models were developed to describe chemical oxygen demand (COD) removal in activated sludge systems operating at long solids retention times (SRT) (i.e. 3 days or longer) and fail to simulate the biological reactions at low SRT systems. A new model is developed to describe colloidal material removal and extracellular polymeric substance (EPS) generation, flocculation, and intracellular storage with the objective of extending the range of whole plant models to very short SRT systems. In this study, the model is tested against A-stage (adsorption) pilot reactor performance data and proved to match the COD and colloids removal at low SRT. The model was also tested on longer SRT systems where effluents do not contain much residual colloids, and digestion where colloids from decay processes are present. [ABSTRACT FROM AUTHOR]