Search

Based on mechanical tensile experiments on the CoCrFeNi high-entropy alloy (HEA), this study explores the forming patterns of the eccentrically shaped sub-hemispherical lined explosively formed projectile (EFP) made of the HEA material. The CoCrFeNi HEA material is initially prepared, and mechanical tensile tests are conducted at various temperatures and strain rates. The Johnson–Cook (J–C) constitutive equation for this material is derived by fitting the experimental data. Scanning electron microscopy and the energy dispersive spectrometer characterize the fracture surface of the tensile specimens, providing insights into the mechanical ductility and fracture mechanism of CoCrFeNi HEA. The EFP forming process under various charge configurations is simulated using AUTODYN software, leading to the identification of the optimal charge configuration. In addition, the damage performance is evaluated. This study provides a theoretical basis for applying HEA materials in the field of shaped charges and offers new ideas and methods for designing more efficient shaped charge warheads. [ABSTRACT FROM AUTHOR]

Hexagonal boron nitride (h-BN) has excellent thermal conductivity and dielectric properties, which shows great potential for low-dimensional devices. However, mechanical properties of h-BN have not been comprehensively investigated through experiments. In this work, we conduct in situ direct tensile tests on freestanding single-crystal few-layer h-BN nanosheets with various layer numbers from 3 to 8, with an elaborate sample transfer and characterization protocol. Young's modulus of 573.8 ± 101.4 GPa and a tensile fracture strain up to 3.2% are revealed, which are comparable to its monolayer counterpart. Moreover, we find a tough-to-brittle transition in few-layer h-BN with the increase in layer number, which is attributed the interplay between the van der Waals interaction and in-plane covalent bonding. These findings could open up new possibilities in mechanical research of van der Waals materials and provide guidance for the design of h-BN-based devices and composites. [ABSTRACT FROM AUTHOR]

Extending the storage-recovery model, we propose a new strengthening model, premised on detailed evolution laws for both mobile and immobile dislocations, for metals under moderate to intense loading. These dislocation density evolution laws include the multiplication, storage under the effect of dislocation junctions, release of pinned dislocations, and annihilation by cross-slip. The storage-release description is derived from a simplified depiction of the probability distribution function of the dislocation length in dislocation networks. Although the model requires only few parameters to characterize the evolution of dislocation densities, remarkable agreement is found with available experimental data. From a theoretical study of the long-time behavior of the model, analytical expressions are provided to easily extract most of these parameters from experimental stress–strain curves in the quasi-static regime, whereas the parameter that governs the strength of the release process is adjusted from dynamic tensile tests. Their values so determined for polycrystalline tantalum allow the model to reproduce experimental plate-impact data with a very good match. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the effect of adding tea tree oil to denture liners on Candida albicans and bond strength to the acrylic denture base. Materials and Methods: Disc-shaped specimens were fabricated from silicone-based resilient liner (Tokuyama, Molloplast), acrylic-based hard liner (GC Reline), and acrylic-based soft liner (Visco-gel). Tea tree oil (TTO) was incorporated into the liners at varying concentrations (0% [control], 2%, 5%, 8%). C albicans were counted by viable colony count, and optical density (OD) was measured with a spectrophotometer. The tensile strength to heat polymerized acrylic denture base was measured in a universal testing machine. The compliance of the data to the distribution of normality was evaluated using the Shapiro Wilk test. Two-way ANOVA, Bonferroni correction, and paired sample t test were performed (α = .05). Results: The addition of TTO into liners provided a significant decrease in the OD values (P < .001). The control groups of the liners presented the highest colony counts, whereas increasing TTO decreased the results (P < .01). According to tensile bond strength test, 8% TTO addition resulted in a significant decrease for Tokuyama (P < .01) and Molloplast liners (P < .05), while 2% TTO resulted in significance for GC Reline (P < .001). Conclusions: Denture liners containing increasing percentages of TTO presented lower amounts of C albicans colonies and decreased bond strength to the denture bases. When using TTO for its antifungal properties, the amount added should be carefully selected because the tensile bond strength may be affected. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the influence of contamination and different cleaning methods on resin bonding to cobalt-chromium (CoCr) alloy disks. Materials and Methods: A total of 160 CoCr disks were divided into 3 groups. The first group (N = 64) was air abraded with alumina particles; the second group (N=64) was air abraded and contaminated with silicone disclosing agent and saliva; the third group (N=32) was neither air abraded nor contaminated. The first two groups were divided into 4 subgroups (N = 16) according to the cleaning method: ultrasonic bath in 99% isopropanol, use of a cleaning suspension of zirconium oxide particles, use of a cleaning suspension based on 10-MDP salt, and treatment with atmospheric plasma. The third group was divided into 2 subgroups (N = 16): treatment with atmospheric plasma and no treatment. All CoCr specimens were bonded to plexiglas tubes filled with a bonding resin that contained phosphate monomer. Tensile bond strength (TBS) was examined by tensile testing after 3 and 150days of water storage plus 37,500 thermal cycles (N = 8). Results: After contamination, TBS was significantly reduced after 150days of water storage. Groups without air abrasion showed initially low TBS and debonded spontaneously after 150days of water storage. Conclusion: None of the cleaning methods was able to remove saliva and silicone disclosing agent on CoCr-alloy surfaces. Surface activation by plasma treatment has no long-term effect on the bond strength. [ABSTRACT FROM AUTHOR]

The effect of co-existence of Mo and B on hydrogen embrittlement (HE) of equiatomic CoCrFeNi and (CoCrFeNi) 96.96 Mo 3 B 0.04 (MoB-doped) alloys are investigated through electrochemical hydrogen charging, tensile tests and advanced microstructural characterization. The MoB-doped alloy exhibits higher HE resistance than CoCrFeNi alloy, which is attributed to MoB-promoted twinning deformation process instead of conventionally strengthening grain boundary (GB) effect resulting from Mo and B segregation. As hydrogen charging time increases, the ductility of both alloys first increases and then decreases, which correlates with the competition relation between H-promoted formation of gradient twins/stacking faults and hydrogen-enhanced decohesion mechanism. For the samples charged 3 h, the beneficial effect of gradient nanostructure caused by chemical composition gradients of hydrogen overcompensates its HE effect, leading to the defeating HE of the alloys by hydrogen itself. This result indicates that the introduction of gradient nanostructures through hydrogen-concentration gradients could be a way forward for designing hydrogen-tolerant alloys. [Display omitted] • Hydrogen can enhance the ductility of CoCrFeNi and MoB-doped alloys. • Hydrogen promotes the formation of twins and stacking faults. • Segregation of Mo and B along grain boundaries are not observed. • MoB-promoted twin deformation process favors high HE-resistance of the alloy. [ABSTRACT FROM AUTHOR]

The present work aims to elucidate the effect of process parameters and pin length on microstructure and the characteristics, distribution of intermetallic compounds (IMCs), and associated failure initiation and progress pattern of AA7075 friction stir lap weld (FSLW) joints prepared employing copper interlayer. FSLW joints obtained using various combinations of tool rotation (900 and 1200 rpm), weld speeds (63 and 98 mm/min), and pin lengths (3 mm and 4 mm) are tested for tensile shear strength, fracture behavior, and the influence of IMCs formed are appraised. Further, the elastic modulus and hardness of the IMCs and neighborhood are evaluated using nanoindentation tests to correlate with the joint performance. The non-uniform thickness of AlCu, Al2Cu, and Al4Cu9 IMCs is formed due to intermixing of Al and Cu whose thickness varied with process parameters. Higher elastic modulus and hardness are recorded at the IMCs. FSLW joint prepared with 1200 rpm tool rotation, 63 mm/min weld speed, and 4 mm pin length results in better joint formation and higher strength, wherein an IMC layer thickness of around 3–4.3 µm is measured near the hook region. [ABSTRACT FROM AUTHOR]

The numerical simulation of metal cutting processes requires material data for constitutive equations, which cannot be obtained with standard material testing procedures. Instead, inverse identifications of material parameters within numerical simulation models of the cutting experiment itself are necessary. This report presents the findings from a large-scale study of dry orthogonal cutting experiments on Ti6Al4V (Grade 5) and Ck45 (AISI 1045). It includes material characterization through microstructural analysis and tensile tests. The study details the measurement of cutting insert geometries and cutting edge radii, evaluates process forces, deduces friction coefficients and coefficients for Kienzle's force model, and analyzes chip forms and thicknesses as well as built-up edge formation depending on the process parameters. The collected data, stored in pCloud, can support other researchers in the field, e.g. for recomputations within numerical models or inverse parameter identifications. The dataset includes force measurements, cutting edge scans, and chip images including longitudinal cross-sections of chips. [ABSTRACT FROM AUTHOR]

This study evaluated the influence of adding borosilicate residue (BS) as a flame retardant in polypropylene (PP) and natural fiber composites. The natural fibers used in this study come from the residue of the carpet industry, which is composed of PP and jute fibers (JT), while the PP used as the polymer matrix is postindustrial recycled material. The composites were produced by corotational twin‐screw extrusion and injection molding to obtain the test specimens. A coating process was carried out to add the water‐soluble fraction of BS to the surface of the compositions that did not receive it through incorporation during processing. To characterize the composites, flammability tests, thermogravimetric analysis (TGA), tensile strength test, and morphological analysis by scanning electron microscope (SEM) were performed. The addition of only 2 wt% BS content induces an increase in thermal stability of 32 and 109°C for composites with and without natural fibers, respectively. The addiction of 20 wt% BS elevates the elastic modulus up to 27% of the composites with and without natural fibers. The BS characterization indicates that it could be applied as a flame retardant when applied as coating methods using the water‐soluble fraction of BS, reducing the burning rate up to 92%. Flammability results are similar for formulations with and without natural fibers, indicating that the natural fibers did not influence the proposed flame retardant. The findings suggest that BS coating is a potential solution to improve the properties of natural fiber‐reinforced polymer composites while also promoting waste recycling. This approach produces composites with improved flammability, thermal stability, and mechanical properties, making them suitable for various end applications. [ABSTRACT FROM AUTHOR]

ObjectivesMethodsResultsConclusionGrain storage facility entrapments continue to be of concern in the agricultural industry, with nearly 1,500 documented incidents recorded over the last 45 years. Previous research studies have shown that attempting to extricate a full-size pulling test dummy from a grain mass requires a substantial amount of tensile or pull force – e.g. up to 1.32 kN if “buried” at waist depth, 2.77 kN at chest depth, and 4.01 kN at head depth. There is, however, a paucity of studies on the amount of distraction the human lumbar spine region can endure. The objective of this research study was to test the maximum tensile force that could be exerted on a sheep’s spine (comparable to the human spine) before the intervertebral discs and surrounding ligament would show signs of failure.Eight lumbar-region sheep spine segments were axially distracted using an MTS Criterion tensile testing machine, and the maximum forces were recorded.The average maximum force that the spinal discs and ligament withstood before showing signs of failure was 2.14 kN (standard deviation of 0.31 kN). This is comparable to the force required to extricate an individual entrapped in a grain mass at chest depth.The authors recommend that grain entrapment victims should not be forcefully pulled out if buried to waist level or above due to two primary reasons: (1) the large variation in failure load observed in our experiment with sheep spines and (2) the lack of knowledge regarding the victim’s pre-existing medical condition. The extractive forces required to remove a victim of entrapment in grain overlaps with the force needed to cause potential damage to the sheep spine, as the 1.7–3.0 kN range is comparable to the 1.65–2.48 kN force range that causes axial failure in the spine. [ABSTRACT FROM AUTHOR]

Among several composite repair methods, single-sided bonded patch repair is a simple and time-effective method, but its post-repair tensile strength is usually low compared to that of double-sided repair and scarf repair. Despite the tensile loading, out-of-plane bending deformation is inevitable owing to the step-like load path and generates peel stress in the adhesive layer. This study proposes a variable stiffness (VS) patch that mitigates steep stiffness changes at the edge of the patch using a curvilinear fiber orientation and verifies its effectiveness in delaying patch debonding. The damage progress in the single-sided repaired quasi-isotropic CFRP laminate under tensile loading was predicted using three-dimensional finite element analysis with cohesive elements. Although patches debonded from one end in the loading direction, the VS patch with low stiffness near the end obtained a smaller out-of-plane deformation and a higher debonding onset strain than those of the standard quasi-isotropic patch. Furthermore, tensile tests of patch-repaired CFRP specimens demonstrated an increase in the debonding onset strain by the VS patch with a small variation. These results confirmed the effectiveness of the VS patch in the single-sided bonded repair of composite structures. [ABSTRACT FROM AUTHOR]

Weak interface bonding is a critical factor that compromises the long‐term durability of the thermal barrier coatings. To mitigate this, we introduce an innovative interface‐strengthening approach by integrating four types of 3D patterns at the top coat/bond coat interface using the laser cladding technique. Tensile tests demonstrate a significant enhancement in interfacial bonding strength, increasing by over 139.2% from 21.6 ± 1.7 MPa for conventional thermal barrier coatings without patterns to 51.67 MPa for the patterned coatings. Moreover, the thermal cycling lifetime has been extended by 41%, from 1026 ± 25 cycles for the conventional coating to 1936 ± 164 cycles for the patterned coating. This enhancement in interfacial toughness and thermal cycling lifetime is primarily because of the blocking and deflection effects of 3D patterns on interfacial crack propagation. Besides, the geometric parameters of the patterns play a crucial role in determining the failure behavior of the thermal barrier coatings. This strategy presents a practical solution for the development of durable thermal barrier coatings and provides the valuable insights for the optimization of other heterogeneous interfaces. [ABSTRACT FROM AUTHOR]

In this study, we delved into innovative strategies to make neat E‐glass fabrics (NGFs) more impact‐ and tensile‐resistant by using shear‐thickening fluids (STFs). To achieve this goal, the polyethylene glycol (PEG) in STFs has been modified. Subsequently, the STF‐impregnated fabric composites were prepared from unmodified PEG and functionally modified PEGs using malonic and tartaric acids, V/S/GF, M/S/GF, and T/S/GF composites, respectively. Fourier‐transform infrared spectroscopy (FTIR) analysis was conducted to confirm the chemical modification of PEGs. The rheological tests showed a significant improvement in the peak viscosity of modified STFs compared with virgin STF. Dynamic rheological analysis also studied media‐particle interaction, revealing improved media‐particle interaction in STFs due to abundant H‐bonding. In addition, a series of experimental tests, namely compressive impact resistance and strip tensile strength tests, have been conducted to investigate the effect of STF modification on the NGF. The results revealed notable improvements in tensile strength and energy dissipation in the T/S/GF and M/S/GF composites compared with V/S/GF and NGF. Importantly, this improvement extended to the impact performance of single, triple, and quintuple layers. Notably, we found that the peak load of 5 T/S/GF was 37.71%, 18.57%, and 11.87% lower than that of 5NGF, 5 V/S/GF, and 5 M/S/GF, respectively. The idea that made these improvements possible came from PEG functionalization, which helps hydrogen bonds form between the dispersed phase and the dispersion medium, leading to higher viscosity. This, in turn, increases inter‐yarn friction, effectively enhancing the spring‐like properties of T/S/GF and M/S/GF compared with V/S/GF. A two‐step artificial intelligence regression analysis underpinned these findings, elucidating the interplay of molecular mechanisms in high‐performance fabric composites. [ABSTRACT FROM AUTHOR]

Poly(N‐vinylcaprolactam) (PNVCL) is a thermoresponsive polymer, which presents a transition from hydrophilic to hydrophobic behavior close to the physiological temperature, being promising for biomedical applications. However, the production of finished products with PNVCL is difficult due to its high mechanical fragility in the solid state. In the present work, in order to prepare a thermoresponsive film with good mechanical properties, a blend of PNVCL with thermoplastic polyurethane (TPU) was prepared. Three compositions of PNVCL/TPU were studied with mass proportions of 90/10, 70/30, and 50/50, respectively. The films were flexible, miscible and presented different thermoresponsive behaviors, with changing from transparent to opaque varying from 31 to 40°C. Contact angle analysis showed significant changes in the hydrophilicity of the films' surfaces with temperature variation. Moreover, it was possible to induce a change in solid films from transparent to opaque by varying the temperature and verify the reversibility of this change. In addition, tensile tests were carried out, which proved, for PNVCL/TPU blends, the reduction of film brittleness with TPU increase. To the best of our knowledge, it is the first work that presents thermoresponsive properties of solid films formed by a blend of PNVCL and TPU. [ABSTRACT FROM AUTHOR]

ABSTRACT This work takes the natural gas hydrate (NGH) reservoir in the Shenhu area at the South China Sea as the target. Using the quartz sand, calcite grains, and illite powder as the main mineral composites, and Portland cement as the bonding material, the host skeleton with similar porosity and mechanical properties to the target reservoir were prepared. Ice was used to simulate natural gas hydrates for their high similarity in mechanical properties and distributions within porous host. The ice saturation in the host skeleton is quantitatively controlled by the quality method. As an analogical simulation, artificial samples with different ice saturations were tested by uniaxial compression measurements and the Brazilian tensile tests, aiming to reveal the mechanical behavior of NGH sediments. The results indicated that the plasticity of the artificial sample increases and its damage form transitions from brittleness to ductility as the ice saturation increases. The effects of free water and ice on the strength of saturated samples are quite different. The free water tends to reduce the strength of the sample due to illite hydration and change of internal friction. The bonding effect of ice tends to increase the strength of the sample, while the ice could also reduce the internal friction. When the ice saturation is larger than 30%, the compressive and tensile strengths of the sample increase with ice saturation, which could be regressed as yc = 2.2628S + 0.8322, and yt = 0.411S + 0.0273, respectively. The constitutive model was developed based on the equivalent medium theory and the D‐P criterion, which could describe the experiment data well with deviations less than 10%. [ABSTRACT FROM AUTHOR]

The objective of this study is to improve the properties of polylactic acid (PLA), a biopolymer produced from renewable resources, without compromising its environmentally friendly "natural composite" properties. The aim was to expand the application range of PLA by making it suitable for the production of high performance composites. With this in mind, it was decided to use inorganic and environmentally friendly materials such as basalt fiber (BF) and boric acid (BA) as reinforcements. Adhesive wear and tensile tests were used to investigate the tribological and mechanical performance of the composites. Differential scanning calorimetry (DSC) and dimensional stability analysis (DSA) methods were used to investigate the thermal properties. Scanning electron microscopy analysis was also used to investigate the morphological properties of the samples. In addition, a matrix modification process using Joncryl®, an epoxy‐based chain extender chemical, was applied to enhance the interfacial interaction between the composite components and improve the composite properties by improving the dispersion of reinforcing materials. As a result of the characterization tests, it was observed that a significant improvement in the properties of the material type containing 10 wt% BF, 0.25 wt% BA and 2 wt% Joncryl® was achieved. A 19% increase in tensile strength of this type of material was observed compared with unreinforced PLA, while the sharp peak increase in the coefficient of friction (COF) curve was shifted from 20 m to 60 m. As a result, it has been presented that environmentally friendly and inorganic materials such as BF and BA can be used to produce composite materials that will serve sectors where the need and use of high performance materials is intense, especially in the automotive, aerospace and aviation sectors. Highlights: The properties of PLA matrix composites were improved by the simultaneous use of BF and BA and the addition of Joncryl®.The structural properties of PLA, an environmentally friendly polymer, have been improved without compromising this characteristic.PLA matrix natural composites with performance that can be used in the automotive, aerospace and aviation sectors have been developed. [ABSTRACT FROM AUTHOR]

The interaction properties can be significantly improved by using conjugated polymers with aromatic rings for carbon nanotube (CNT)‐reinforced composites. In this study, we investigated the influence of the molecular structure of the polyimide (PI) conjugated polymer on the mechanical properties and interfacial characteristics of CNT/PI composites. To that end, nanocomposites composed of aligned multi‐walled carbon nanotubes (MWNTs) and PI with three different molecular structures were examined. Tensile tests, small‐angle x‐ray scattering (SAXS), and molecular dynamics (MD) simulations were conducted, which revealed significant variations in the tensile properties among the three aligned MWNT/PI nanocomposites. The SAXS analyses indicated that MWNT/BPDA‐PDA had the largest interfacial specific surface area, as corroborated by the MD simulation results, which further demonstrated that the rigidity of the molecular structure influenced the extent of wrapping the PI chains around MWNTs. A highly rigid molecular chain hindered the intrachain folding of the PI chain, facilitating better wrapping of the MWNTs and a larger interfacial area. The MWNTs induced conformational changes in the PI chain owing to π–π stacking. Hermans orientation factor revealed that BPDA‐PDA exhibited the highest degree of orientation with MWNTs, whereas BTDA‐MPD displayed the greatest extent of MWNT‐induced conformational changes. The calculated interaction energy confirmed that MWNT/BTDA‐MPD exhibited the strongest interface strength (−41.50 Kcal/mol/nm2), which was 36.32% and 43.03% higher than that of MWNT/BPDA‐ODA and MWNT/BPDA‐PDA, demonstrating its superior tensile properties. This study provides insights into the interfacial characteristics between conjugated polymers and CNTs, which are essential for designing interfaces and developing high‐performance nanocomposites. Highlights: Interfacial interaction between polyimide and aligned carbon nanotubes was investigated.Modulation by polyimide structures on the mechanical property of composite was revealed.The rigidity of the polyimide hinders the folding and facilitates the wrapping.The interfacial interaction induces molecular orientation in polyimide can be observed by molecular dynamic simulation. [ABSTRACT FROM AUTHOR]

Epoxy asphalt, a thermosetting polymer, is characterized by stable, irreversible internal chemical bonds that prevent recovery and spontaneous micro‐crack healing, unlike conventional asphalt. This study introduces a renewable nano‐modifier synthesized via esterification of carboxyl‐functionalized carbon nanotubes (CNTs‐COOH) and furfuryl alcohol (FA), termed CNTs‐FA. The successful synthesis of CNTs‐FA was confirmed through various microscopic techniques. Integrating CNTs‐FA into epoxy asphalt materials, the optimal dosage was identified as 0.05% of the total epoxy asphalt mass using tensile tests and fluorescence microscopy. Thermal reversible effects and mechanisms were further analyzed through multiple regeneration cycles using tensile properties, fluorescence microscopy, and infrared spectroscopy. The study elucidates that the thermal reversibility in epoxy asphalt is facilitated by the Diels‐Alder (DA) reaction between the conjugated diene structure in FA and the curing agent oleylamine. This research provides an effective solution to the non‐recoverability and unrepairable micro‐cracks of traditional epoxy asphalt mixtures. Highlights: CNTs‐FA was successfully prepared by esterification reaction.Using nano modification methods, introduce DA reaction into curing system.Renewable function of epoxy asphalt by DA reversible reaction. [ABSTRACT FROM AUTHOR]

Fiber‐reinforced polymers (FRP) feature high strength‐to‐weight ratio amongst the emerging class of natural composites. This paper presents the impact of the glass fiber on the tensile strength of the flax epoxy laminate. The mechanical behavior and damping characteristics of flax fiber reinforced polymer (FFRP) and the hybrid flax‐glass fiber reinforced polymer (HFRP) are experimentally investigated. Both the flax and hybrid FRPs are made using vacuum infusion process. The specimens without and with holes of 4, 5, and 6 mm in diameter are subjected to tensile test using acoustic emission monitoring and free vibration test. In the former testing, HFRP resulted in higher peak frequencies and cumulative counts. Also, the natural frequency and damping factor of HFRP vary proportionately with the hole size, as identified in the latter tests. Different damage mechanisms during the tensile test revealed that the presence of glass fibers in HFRP increased resistance for certain damage mechanisms. Highlights: Adding glass fiber to flax fiber reinforced polymer (FFRP) creates a hybrid FRP (HFRP) with increased resistance to damage and improved damping characteristics.HFRP exhibits a distinction in failure mechanisms compared to FFRP.The study utilizes acoustic emission (AE) to identify various damage mechanisms in the material, providing a more detailed information.The addition of glass fibers in HFRP leads to a more pronounced increase in damping factors. [ABSTRACT FROM AUTHOR]

Six varieties of alkoxy polyhedral oligomeric silsesquioxanes (POSSs) featuring methoxy, ethoxy, n‐propoxy, isopropoxy, n‐butoxy, and n‐hexoxy as terminal groups were synthesized using the direct dehydrogenation condensation method. These POSSs were then incorporated as cross‐linking agents into hydroxy‐terminated polydimethylsiloxane (HPDMS) to create various formulations of room temperature vulcanized silicone rubbers (RTV SRs), denoted as SRM, SRE, SRP, SRI, SRB, and SRH. The morphology, thermal stability, and mechanical properties of the resulting SRs are analyzed using scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and universal tensile testing machine. The findings indicate that the incorporation of POSS into SRs results in significant enhancements in thermal stability and mechanical properties when compared to the control group (TEOS/SR). SRB and SRH exhibit the highest cross‐linking density and tensile strength. Specifically, SRB‐4 demonstrates the highest tensile strength at 2.66 MPa, representing an 8.6‐fold increase compared to TEOS/SR. The maximum decomposition rate temperature of SRP‐4 reaches 527°C and is 194°C higher than TEOS/SR. Because the alkoxy groups with different chain lengths on POSS have different chemical reactivity, they have a great effect on the dispersion of POSS in SRs, which affect the cross‐linking density, tensile strength, and thermal stability. [ABSTRACT FROM AUTHOR]

Thermoset materials, known for their stable topology structure, have garnered significant interest in recent years for their applications in coatings, foam, adhesives, and other fields. In general, the low chemical crosslinking density of thermoset materials means poor mechanical properties. In this study, we adjusted the topological structure of thermoset elastomers through formula design and controlled their hard segment content at the same level. The mechanical tensile test results show that as the chemical crosslinking density of the elastomer decreases, the fracture tensile strength shows a trend of first increasing and then decreasing. Although the content of amino ester groups in the elastomer is the same, low field nuclear magnetic resonance and Fourier transform infrared analysis show that as the density of the chemical cross‐linking network decreases, more physical cross‐linking points are formed between the elastomer network chains. Furthermore, the polyurethane hard segment formed an amorphous microphase separation structure in the elastic matrix. This study proves that constructing a moderate physical hydrogen bonding association structure between the network chains in polyurethane cross‐linked thermoset elastomers is another important way to prepare thermoset elastomers with excellent mechanical properties. [ABSTRACT FROM AUTHOR]

Organic photodetectors (OPDs) hold immense promise for stretchable and wearable applications, but their photoactive films demonstrate brittleness, stiffness, and mechanical instability, posing challenges for future applications. Herein, the nanoconfinement effect is reported to substantially improve the stretchability and mechanical stability while reducing the stiffness of photoactive films, simultaneously maintaining the high light detection performance. The microstructure, mechanical properties, and photoelectric performance of the quaternary blend films with varying elastomer contents are thoroughly characterized. Additionally, the elastic modulus of quaternary blends can be accurately predicted by the Coran–Patel model. Cyclic tensile tests demonstrate enhanced mechanical stability, resulting in a specific detectivity of the quaternary blend with the nanoconfinement effect being 19 times higher than that of the ternary blend after 200 cycles. Overall, this study provides novel insights into constructing stretchable blend films for wearable electronics. [ABSTRACT FROM AUTHOR]

This study presents the development of a material selection decision support system for an automotive rooftop tent. The system uses five parameters of material cost, formability, corrosion resistance, tensile strength and hardness to optimize material choice from a list of aluminium alloy options. This was done before production via the deep drawing process can commence. The parameters were quantified using the average market prices for each alloy, product requirements obtained from the case study and the performance data that was obtained from the uniaxial tensile and hardness tests. These inputs were combined with the developed material selection framework and then programmed into a web-based decision support system for automated, data-driven material selection. The output presents the recommendation for the optimum material that balances cost-effectiveness and performance. The decision support system was successfully used to select the optimum alloy for the rooftop tent. Results show that AA1050 is the optimum material, providing weight reduction at the minimum achievable cost without compromising the product requirements for the rooftop tent. The decision support system is also scalable, and this allows it to be used with larger datasets for different products and processes in the future. [ABSTRACT FROM AUTHOR]

A soft and stretchable safeguarding silicone rubber is obtained by embedding large amount of shell‐less shear thickening fluid (STF) droplets into polydimethylsiloxane (PDMS) matrix through the synergistic process of emulsification and polymerization. Feeding time and temperature are optimized to generate the efficient STFs with 72.2 wt% SiO2 and high thickening viscosity of 6340 Pa·s. The embedding process and the evolution of the shell‐less STF droplets in PDMS matrix are explored by both optical and scanning electronic microscopes. The influence of the STF content on the mechanical and anti‐impact performance of the composites is explored through tensile tests and drop hammer tests. The STF content could be as much as 75 wt%, which enhances not only the softness and stretchability (elongation at break >200%) but also the impact‐protective performance of the silicone rubber. The STF/PDMS composites covering on planar and nonplanar glass substrates demonstrate self‐adaptive protection effect by reducing the force impact peak by 35%, due to the shear thickening and energy absorption of STF in the composites. This study develops a facile and scalable method for the implantation of the STF into polymer matrix, extending the applications of STF/PDMS composites in varied fields. [ABSTRACT FROM AUTHOR]

Polyolefin elastomers are typically copolymers of ethylene with 1-butene, 1-hexene, or 1-octene. Other types of comonomers have not been widely applied industrially. The cost of 1-heptene obtained from Fischer-Tropsch synthesis is only half that of 1-octene, making it a viable economical substitute. This work utilized 1-heptene from Fischer-Tropsch synthesis and 1-octene from ethylene oligomerization as research subjects. Eight metallocene POEs based on 1-heptene and 1-octene were synthesized using Me2Si(C5Me4)(NtBu)]TiCl2 (Ti-CGC) catalyst. The copolymers' molecular structures and physical properties were characterized using HT-GPC, Temperature Rising Elution Fractionation (TREF),13C-NMR, DSC, Melt Index (MI), and Tensile tests. Compared to 1-heptene, 1-octene more effectively reduces the melting point and crystallinity, while 1-heptene's stronger comonomer insertion capability facilitates the production of copolymers with higher comonomer content. Similar ternary sequence distributions and molecular dynamics indicate that ethylene/1-heptene and ethylene/1-octene copolymers possess comparable chain microstructures. Both ethylene/1-heptene copolymers and ethylene/1-octene copolymers exhibit excellent toughness and mechanical properties. Although the activity and insertion capacity of ethylene and 1-heptene decrease at low comonomer concentrations, they significantly improve at higher comonomer concentrations. Thus, Fischer-Tropsch synthesis of metallocene ethylene/1-heptene copolymers can effectively reduce raw material costs and be a cost-effective alternative to ethylene/1-octene copolymers. [ABSTRACT FROM AUTHOR]

Background/Objectives: The Achilles tendon is a popular allograft option for anterior cruciate ligament (ACL) reconstruction. Structurally, the tendon is known to have a 90-degree rotational fiber track. Preparation techniques, with this consideration, may influence the strength of the graft. This study aims to assess the tensile strength of a novel Achilles tendon allograft harvest procedure following the rotational fiber track. Methods: Both Achilles tendons were harvested from formalin-embalmed cadavers [(n = 20), male n = 13, female n = 7, average age = 70]. Ten cadavers had the right Achilles as the control and the left Achilles as the fiber track sample; 10 cadavers had the opposing designation. Tensile strength was tested utilizing a Bose machine. An unpaired t-test was used to compare data across groups. Results: The average ultimate load for the control group was 874.17 N, with an average elastic stiffness of 76.01 N/mm. The ultimate load for the fiber track group was 807.84 N, with an average elastic stiffness of 64.75 N/mm. No statistically significant difference (p = 0.21) was determined between the average ultimate loads or elastic loads (p = 0.18) across groups. Conclusions: These data suggest that the rotational fiber track method of Achilles allograft has consistent tensile strength and elastic stiffness as compared to the common harvest procedure. The rotational fiber track method for ACL harvesting is a viable alternative option to the common harvest procedure for usage in an ACL reconstruction. [ABSTRACT FROM AUTHOR]

This article delivers a new Preisach model representing the correlation between the elastoplastic behavior of structural mild steel under axial monotonic and cyclic loading with damage. The newly formed model is based on the experimentally defined correlation between axial monotonic and cyclic behavior of structural mild steel. To examine the monotonic and cyclic behavior of structural mild steel and find fitting material properties for the model, monotonic and cyclic axial tensile tests are performed. Tests are executed on coupons of the commonly used European structural steel S275. The model represents a mathematical description of modified single-crystal material behavior under monotonic loading. Two different approaches were used to describe damage in the multilinear mechanical model. The excellent agreement with experimental results is achieved by infinitely linking many single-crystal elements in parallel, forming the polycrystalline model. This model provides a good solution for everyday engineering practice due to its geometric representation in the form of the Preisach triangle and the lower costs of monotonic tests used to define material properties compared to cyclic tests. [ABSTRACT FROM AUTHOR]

This study explores a novel approach to obtaining 3D printed strain sensors, focusing on how changing the printing conditions can produce a different piezoresistive response. Acrylonitrile butadiene styrene (ABS) filled with different weight concentrations of carbon nanotubes (CNTs) was printed in the form of dog bones via fused filament fabrication (FFF) using two different raster angles (0–90°). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) in TUNA mode (TUNA-AFM) were used to study the morphological features and the electrical properties of the 3D printed samples. Tensile tests revealed that sensitivity, measured by the gauge factor (G.F.), decreased with increasing filler content for both raster angles. Notably, the 90° orientation consistently showed higher sensitivity than the 0° orientation for the same filler concentration. Creep and fatigue tests identified permanent damage through residual electrical resistance values. Additionally, a cross-shaped sensor was designed to measure two-dimensional deformations simultaneously, which is applicable in the robotic field. This sensor can monitor small and large deformations in perpendicular directions by tracking electrical resistance variations in its arms, significantly expanding its measuring range. [ABSTRACT FROM AUTHOR]

In the present study, biocomposite materials were created by incorporating biochar (BC) at rates of 1, 2.5, and 5 wt.% into a poly(butylene succinate) (PBSu) matrix using a two-stage melt polycondensation procedure in order to provide understanding of the aging process. The biocomposites in film form were exposed to UV irradiation for 7, 14, and 21 days. Photostability was examined by several methods, such as Fourier transform infrared spectroscopy (FTIR), which proved that new carbonyl and hydroxyl groups were formed during UV exposure. Moreover, Differential Scanning Calorimetry (DSC) measurements were employed to record the apparent UV effect in their crystalline morphology and thermal transitions. According to the molecular weight measurements of composites, it was apparent that by increasing the biochar content, the molecular weight decreased at a slower rate. Tensile strength tests were performed to evaluate the deterioration of their mechanical properties during UV exposure, while Scanning Electron Microscopy (SEM) images illustrated the notable surface alternations. Cracks were formed at higher UV exposure times, to a lesser extent in PBSu/BC composites than in neat PBSu. Furthermore, the mechanism of the thermal degradation of neat PBSu and its biocomposites prior to and upon UV exposure was studied by Pyrolysis–Gas Chromatography/Mass Spectrometry (Py–GC/MS). From all the obtained results it was proved that biochar can be considered as an efficient UV-protective additive to PBSu, capable of mitigating photodegradation. [ABSTRACT FROM AUTHOR]

In this study, olive pit agro-waste from the olive oil industry is valorized by incorporating it as an additive in a polyethylene terephthalate glycol (PETG) matrix to develop bio-based composite materials for large format additive manufacturing (LFAM). The olive pits were first ground into olive pit powder (OPP) and then functionalized by polymerizing poly(butylene adipate-co-terephthalate) PBAT on their surface, resulting in a hydrophobic, modified olive pit powder (MOPP) with enhanced compatibility with the PETG matrix. OPP and MOPP composites were compounded and 3D-printed via Fused Granular Fabrication (FGF) using 5, 10, and 15 wt.% concentrations. The PBAT coating increased the degradation temperature and specific heat capacity of the material, contributing to a lower melt viscosity during printing, as confirmed by MFR, MDSC, and TGA analyses. Tensile testing revealed that MOPP composites generally exhibited superior mechanical properties compared to OPP composites, likely due to the improved compatibility between PBAT on the MOPP surface and the PETG matrix. SEM analysis further validated these findings, showing a highly irregular and porous fracture surface in OPP composites, while MOPP composites displayed a smooth surface with well-integrated MOPP in the PETG matrix. [ABSTRACT FROM AUTHOR]

Material selection is the main challenge in the drone industry. In this study, hardness, abrasive wear, impact resistance, tensile strength, and durability (frost resistance and accelerated ageing) were identified as important characteristics of drone materials. The additive manufacturing technology was used to produce the drone leg specimens and prototype. The suitability of PETG as a primary filament material in the design of the drone leg was investigated. Nine series were printed with different raster lines (0.1, 0.2 and 0.3 mm) and infill densities (30, 60 and 90%). Printed specimens were annealed in salt and alabaster, as well as immersed in liquid nitrogen. Series with raster line-infill densities of 0.1–30, 0.3–30, 0.1–90 and 0.3–90 were identified as the most interesting ones. Thermally treated specimens had better mechanical and durability properties, and infill density was found to be the most important printing parameter. Specimen annealed in salt with a raster line of 0.1 mm and infill density of 90% had the best results. Since ABS is the most common material used for drone leg production, its properties were compared with the PETG specimen, which showed the best properties. The potential of PETG as an alternative material was proven, while the flexibility, productivity and suitability of the leg drone design were additionally confirmed. [ABSTRACT FROM AUTHOR]

Methyl gallate (MG) and gallic acid (GA) are natural compounds with potent activity against methicillin-resistant Staphylococcus aureus (MRSA), a significant global health concern. In this study, MG and GA were incorporated into cellulose acetate (CA) blended with poly(vinyl alcohol) (PVA) to create electrospun nanofibers aimed at combating both methicillin-susceptible S. aureus (MSSA) and MRSA. Key electrospinning parameters—DC voltage, injection flow rate, and syringe tip–collector distance—were optimized, with the best conditions being a 1.5 mL/h flow rate, 30 cm distance, and 20 kV voltage. The resulting nanofiber mats were characterized by SEM, FTIR, DSC, tensile strength testing, contact angle measurement, swelling behavior, and release profiling. Antibacterial properties were assessed using the agar diffusion test. The obtained nanofibers had diameters ranging from 879.33 to 906.13 nm. Among the samples, MG-GA-CA/PVA exhibited the highest tensile strength, good flexibility, and improved stiffness, which was related to enhanced thermal stability and chemical interactions as shown by DSC and FTIR analyses. This formulation also displayed excellent hydrophilicity, swelling properties, and a consistent release profile over 8 to 24 h. Furthermore, MG-GA-CA/PVA showed superior antibacterial activity against both MSSA and MRSA, suggesting its potential as a strong, flexible, and effective anti-S. aureus material. [ABSTRACT FROM AUTHOR]

A model based on the fitting of stress–strain data by tensile tests of bio-composites made of a bioplastic (polybutylene succinate (PBS)) and brewer spent grain filler (BSGF) is developed. Experimental tests were performed for various concentrations of BSGF in the range from 2% to 30%. The model is suitable for describing the elastic–plastic behavior of these materials in terms of two mechanical parameters, tensile stress and tensile stiffness (or Young's modulus), depending on the filler concentration. The mechanical characteristics, derived from the fit parameters, show good agreement with the experimental data. The mathematical model used here could be an important aid for the experimentation and manufacturing process as it allows the prediction of the mechanical tensile parameters of a mixture with different filler concentrations, avoiding the long and complex preparation cycle of bio-composites, as well as the specific mechanical tests. The physical properties required by the objects created with the PBS–BSGF bio-composite by the partners/stakeholders of the research project co-financing this research can be quite different; therefore, a mathematical model that predicts some of the mechanical properties in terms of the mixture composition may be useful to speed up the selection of the required amount of BSGF in the mixture. [ABSTRACT FROM AUTHOR]

The development of thermoplastic starch (TPS) films is crucial for fabricating sustainable and compostable plastics with desirable mechanical properties. However, traditional design of experiments (DOE) methods used in TPS development are often inefficient. They require extensive time and resources while frequently failing to identify optimal material formulations. As an alternative, adaptive experimental design methods based on Bayesian optimization (BO) principles have been recently proposed to streamline material development by iteratively refining experiments based on prior results. However, most implementations are not suited to manage the heteroscedastic noise inherently present in physical experiments. This work introduces a heteroscedastic Gaussian process (HGP) model within the BO framework to account for varying levels of uncertainty in the data, improve the accuracy of the predictions, and increase the overall experimental efficiency. The aim is to find the optimal TPS film composition that maximizes its elongation at break and tensile strength. To demonstrate the effectiveness of this approach, TPS films were prepared by mixing potato starch, distilled water, glycerol as a plasticizer, and acetic acid as a catalyst. After gelation, the mixture was degassed via centrifugation and molded into films, which were dried at room temperature. Tensile tests were conducted according to ASTM D638 standards. After five iterations and 30 experiments, the films containing 4.5 wt% plasticizer and 2.0 wt% starch exhibited the highest elongation at break (M = 96.7%, SD = 5.6%), while the films with 0.5 wt% plasticizer and 7.0 wt% starch demonstrated the highest tensile strength (M = 2.77 MPa, SD = 1.54 MPa). These results demonstrate the potential of the HGP model within a BO framework to improve material development efficiency and performance in TPS film and other potential material formulations. [ABSTRACT FROM AUTHOR]

This article presents the concept, research, and modeling of a sandwich composite made from ULTEM 9085 and polycarbonate (PC). ULTEM 9085 is relatively expensive compared to polycarbonate, and the composite structure made of these two materials allows for maintaining the physical properties of ULTEM while reducing the overall costs. The composite consisted of outer layers made of ULTEM 9085 and a core made of polycarbonate. Each layer was 3D-printed using the fused filament fabrication (FFF) technology, which enables nearly unlimited design flexibility. The geometry of the test specimens corresponds to the ISO 527-4 standard. Tensile and three-point bending tests were conducted. The structure was modeled in a simplified manner using averaged stiffness values, and with the classical laminate theory (CLT). The models were calibrated through tensile and bending tests on ULTEM and polycarbonate prints. The simulation results were compared with experimental data, demonstrating good accuracy. The 3D-printed ULTEM-PC-ULTEM composite exhibits favorable mechanical properties, making it a promising material for cost-effective engineering applications. [ABSTRACT FROM AUTHOR]

This paper deals with Barkhausen noise in Trip steel RAK 40/70+Z1000MBO subjected to uniaxial plastic straining under variable strain rates. Barkhausen noise is investigated especially with respect to microstructure alterations expressed in terms of phase composition and dislocation density. The effects of sample heating and the corresponding Taylor–Quinney coefficient are considered as well. Barkhausen noise of the tensile test is measured in situ as well as after unloading of the samples. In this way, the contribution of external and residual stresses on Barkhausen noise can be distinguished in the direction of tensile loading, as well as in the transversal direction. It was found that the in situ-measured Barkhausen noise grows in both directions as a result of tensile stresses and the realignment of domain walls. The post situ-measured Barkhausen noise drops down in the direction of tensile load due to the high opposition of dislocation density at the expense of the growing transversal direction due to the prevailing effect of the realignment of domain walls. The temperature of the sample remarkably grows along with the increasing strain rate which corresponds with the increasing Taylor–Quinney coefficient. However, this effect plays only a minor role, and the density of the lattice imperfection expressed especially in terms of dislocation density prevails. [ABSTRACT FROM AUTHOR]

Glass Fiber Reinforced Polymer (GFRP) bars are used as reinforcement for structural concrete, especially in cases where corrosion of traditional steel reinforcement is a problem. The tensile strength of these reinforcing bars is the primary characteristic on which the design of concrete members reinforced with GFRP bars relies. Determination of the tensile strength of the bars using a direct tensile test is a time and resource-intensive task and therefore is not routinely conducted for quality control. The tensile strength can also be measured from flexure tests, which are much simpler than direct tensile tests, and use appropriate correlation formulations. In this paper, the applicability of flexure testing for the identification of bars' tensile strength is investigated by conducting and analyzing both 3-point and 4-point flexure testing. The correlation formulations are presented that allow the determination of tensile strength from the modulus of rupture. The Weibull weakest link model and the assumption of the same flaw distribution in tensile and flexure tests is adopted. The results of the 3-point and the 4-point bending are presented and compared. Comparisons are also conducted to select direct tensile test results. The work shows that 3-point and 4-point bending tests provide very similar results, with the difference between the results being 2% to 10%, suggesting both tests can be used for tensile strength determination of GFRP bars. [ABSTRACT FROM AUTHOR]

Nickel foam offers excellent conductivity, a high surface area, and lightweight structure, making it ideal for applications, like battery electrodes, catalysts, and filtration systems. Its durability and corrosion resistance further enhance its performance in various industries. However, few studies focus on the tensile anisotropy of nickel foam and its tensile fracture process. In this study, the anisotropic tensile behavior of nickel foam with varying relative densities has been investigated, along with its tensile fracture behavior using in situ techniques. The tensile properties of nickel foams show strong anisotropy due to the flattening process in the production process. The results show that the tensile properties, including the yield strength, tensile strength, and elastic modulus, increase with the increasing relative density, while the elongation percentage has no relationship with the relative density. The experiment data on tensile strength are in agreement with Gibson's formula and Liu's formula. In situ tensile tests are conducted to explore the microscopic fracture mechanism of nickel foam. The results show that the struts of nickel foam are tensile fractures or shear fractures near the joints, and the fracture process of struts is clearly recorded and analyzed. This study is significant as it provides critical insights into the anisotropic tensile behavior of nickel foam and fracture mechanism, enabling the optimization of production processes and broadening its potential applications. [ABSTRACT FROM AUTHOR]

As a hydrocarbon reservoir rock, shale is generally composed of highly compacted clay particles with submicrometer sizes and includes nanometric porosity and different hard particles, like quartz, pyrite, etc. One of the key reasons for the formation of a complex fracture network via hydraulic fracturing is the multiscale heterogeneity of shale, especially heterogeneity on the microscale. This paper conducted on an experimental investigation of shale and explored the intrinsic relationship between the microstructure, the related mechanical properties at the micrometer level and the anisotropic failure mechanism. Small-scale specimens with micrometer dimensions in the form of cantilever beams with rectangular cross-section were fabricated by means of a focused ion beam (FIB) and tested via bending with a nanoindenter. The load–deflection curves of these bending beams were monitored up to failure, and the tensile strength of the shale composite was directly derived from the load–deflection curves at 474.5 MPa (parallel to the bedding plane) and 168.9 MPa (vertical to the bedding plane). The results show that the strength anisotropy of shale at the micrometer scale is driven by the clay particles and other minerals, and the bonds of these particles. The modulus anisotropy of the shale composite at the microscale is dominated by the orientation of clay particles. Moreover, the shale composite embedded with pyrite exhibited strong softening characteristics. [ABSTRACT FROM AUTHOR]

The growth and advancements done in solid mechanics and metallurgy have come up with various characterization techniques that help in prediction of elastic properties of different types of materials—isotropic, anisotropic, transverse isotropic, etc. Soft tissues which refer to fibrous tissues, fat, blood vessels, muscles and other tissues that support the body were found to have some control over its mechanical properties. This mechanical behavior of soft tissues has recently shifted the attention of many researchers to develop methods to characterize and describe the mechanical response of soft tissues. The paper discusses the biomechanical nature of soft tissues and the work done to characterize their elastic properties. The paper gives a review of the behavior and characteristics of soft tissues extracted from various experimental tests employed in their characterization. Soft tissues exhibit complex behavior and various complexities are involved in their experimental testing due to their small size and fragile nature. The paper focuses on the conventionally used tensile and compression tests and the difficulties encountered in soft tissue characterization. It also describes the utility of ultrasound technique which is a non-destructive method to characterize soft tissues. Tensile and compression test used to characterize materials are destructive in nature. Ultrasound technique can provide a better way to characterize material in a non-destructive manner [ABSTRACT FROM AUTHOR]

This investigation delves into the development of cupric oxide functionalized activated carbon fabrics (ACF@CuO) as a filter material for self-decontaminating protective clothing designed to counter chemical warfare agents (CWAs). Three variants of samples were developed by controlling functionalization levels (7.5%, 13.0%, 16.0% w/w) through optimized precursor concentrations, integrating CuO particles onto ACF surfaces. Comprehensive analysis using techniques like FTIR, BET surface area, SEM, EDX, STEM, XRD, TGA, and XPS explored the material's properties. The studies concentrated on evaluating the performance through kinetic studies of self-detoxification of CWA Sarin (GB) using developed ACF@CuO materials analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). ACF@CuO with 16% w/w functionalization exhibited superior self-decontamination against GB, achieving 92.87% efficiency within 18 hours, in contrast to 26.55% for ACF alone. Additionally, materials were tested for tensile strength, air-permeability, and Sulfur Mustard breakthrough time (HDBTT) as per IS 17377:2020 standard. The material with 13% w/w functionalization emerged as the recommended filter layer for CWA protective clothing designed for defense and civilian safety applications. The significant improvements in the self-decontamination efficiency of the material were attributed to the synergistic effects of ACF's adsorption capabilities combined with the decontamination properties of CuO rod-shaped crystals embedded in the surface of ACF. [ABSTRACT FROM AUTHOR]

As one of the hotspots in rock mechanics research, coal rock's dynamic tensile properties are crucial to the parameter selection of blasting engineering, mechanism studies of rock burst disasters, and stability control. The stress states of coal rock during indirect tension with Brazilian splitting and direct tension with split Hopkinson tensile bar (SHTB) were compared using numerical simulations, revealing the superiority of the direct-tension test. On this basis, systematic dynamic direct-tension tests of coal rock under the strain rates (124 to 247 s−1) were carried out utilizing the improved SHTB, and quasi-static tensile tests were performed for comparison. The results reveal that the connection mode of using high-strength adhesive paste specimens and gradient reinforcement with steel wire mesh is reliable for SHTB tests. However, the stress equilibrium is no longer satisfied if the strain rate exceeds 300 s−1, and the layered fracture of the specimen will occur. With an increase in strain rate, the dynamic elastic modulus increases linearly, the dynamic tensile strength tends to increase as an exponential function, and the dynamic increase factor (DIF) tends to increase linearly in two stages. The DIF grows slowly once the strain rate is over 180 s−1 and the dynamic ultimate tensile strength of the coal rock lies around 8 MPa. Finally, based on the improved Zhu–Wang–Tang (ZWT) model and the introduction of dynamic damage factor, the unified damage constitutive equation that can describe the strain rate effect under dynamic tension of coal rock is constructed. Moreover, the rationality of the constitutive parameter value is verified. Highlights: Superiority of direct tension test over Brazilian disk tensile test is revealed Functional relationship between tensile DIF and strain rate of coal rock isobtained Unified damage constitutive model of coal rock under dynamic tension isconstructed [ABSTRACT FROM AUTHOR]

Purpose: Corneal collagen cross-linking (CXL) can halt corneal ectasia. Leaving corneal epithelium intact during treatment may reduce the incidence of complications. However, it is under debate whether this reduces efficacy and if oxygen supplementation may be necessary to optimize the cross-linking effect. This study aimed to investigate the impact of hyperbaric oxygenation (HBO) on intracorneal oxygen concentrations during epi-off and epi-on CXL. Methods: CXL was performed using riboflavin and ultraviolet-A (UV-A) irradiance (3 mW/cm2 for 30 min) on porcine corneas under normobaric and hyperbaric conditions, with and without supplemented oxygen, with and without epithelium. Intracorneal oxygen concentrations were continuously monitored before and during irradiation. Biomechanical properties were assessed through tensile strength testing. Results: HBO alone did not cause perceivable changes in stromal oxygen concentrations. Oxygen supplementation resulted in higher oxygen concentration in corneal stroma during CXL. HBO may cause a further increase in oxygen levels, although this was not statistically significant in this study. Notably, a tendency of oxygen levels to rise continuously during UV-irradiation was observed using HBO. Biomechanical properties showend no statistically significant differences between any groups. Conclusions: In this ex-vivo model, HBO increased stromal oxygen levels during CXL, regardless of the presence of corneal epithelium. The dynamics in oxygen concentrations in corneal stromal tissue during CXL suggest that time is an important factor to consider in modifications of established protocols. Also, we hypothesize that stromal levels of riboflavin and UV-A irradiance may be more critical to the CXL effect when oxygen is supplemented and epithelium is not removed. [ABSTRACT FROM AUTHOR]

Friction stir lap welding (FSLW) of dissimilar acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) was conducted using a double-pin tool. The formation process of the weld and the influences of rotational speed on the microstructure and mechanical property were investigated. It was found that the weld was generated accompanying with the closure of old cavities in the front of the pins and the simultaneous regeneration of new cavities in the rear of the pins. Annular material flow on the vertical and horizontal directions occurred during FSLW. With the increase of the rotational speed, the PC anchors resulted from the upflow of plasticized PC layer and the shoulder affected zone both enlarged. Microstructure analysis of the weld nugget showed that PC was fragmented into lamellar, columnar, and spherical particles and their dimensions decreased when rotational speed increased. Lap-shear tensile tests showed that the weld strength increased with higher rotational speed and the maximum strength of the weld produced under 800 r/min reached 19.38 MPa, which was comparable to the ABS/PC welds produced by a tapered pin under the optimal parameters. Through the further optimization of such FSLW process, it was potential to join dissimilar polymeric components in future industrial manufacturing field. [ABSTRACT FROM AUTHOR]

The present study deals with the prediction of the strength of the glue joint stressed in tension on a local wood species called Terminalia Superba (Fraké) assembled according to the bevel configuration using two artificial intelligence models namely ANFIS and LSTM. The experimental data obtained during tensile tests on a tropical species allowed us to determine the mechanical properties taken as structural parameters for the LSTM and ANFIS models. The results of the analysis show that among all the LSTM methods, LSTM 'ADAM' offers a low root mean square error (RMSE), a high accuracy (Acc) (RMSE = 2.16, Acc = 0.756). For all methods, ANFIS obtained the best results, a high R-squared and a very low root mean square error (RMSE) (R-squared = 0.979, RMSE = 0.51). This indicates that the prediction of the tensile strength of the adhesive joint is more satisfactory with ANFIS than with LSTM. [ABSTRACT FROM AUTHOR]

Additive Manufacturing (AM) techniques, particularly Fused Filament Fabrication (FFF), have revolutionized prototyping and low-volume production. Improving the tensile properties of FFF-printed parts is a primary objective to elevate their functional utility. This study aimed to investigate the effects of annealing time (ATM), annealing temperature (ATP), and nozzle diameter (ND) on the tensile strength (TS) of two commonly used printing materials: Polyethylene Terephthalate Glycol (PETG) and PETG reinforced with carbon fibre (PETG-CF). Samples with varying ND (0.4 mm, 0.6 mm, and 0.8 mm) underwent annealing at ATP of 80°C and 100°C for ATM of 60 min and 120 min, respectively. Subsequent tensile tests were meticulously conducted, and regression models were employed to comprehensively analyse the influence of these control factors on TS. The findings from the tensile tests on annealed specimens revealed substantial improvements in TS for both PETG and PETG-CF materials. Statistical analysis, Taguchi method (TM), and response surface methodology (RSM) indicated that ND exerted a more pronounced impact on TS compared to ATM and ATP. By identifying the optimal control factor combinations for each material, the study pinpointed that the best TS was achieved at 0.8 mm ND, 120 minutes ATM, and 100°C ATP for PETG-CF. The remarkable enhancement in tensile properties for annealed FFF-printed parts underscores the potential of PETG-CF to replace structural metallic components in critical applications within the automotive and aeronautical industries. [ABSTRACT FROM AUTHOR]

Elastomers have diverse properties that make them suitable for use in many industrial applications. Natural Rubber, in particular, is an attractive elastomer due to its desirable mechanical properties as well as lightweight compared to metals. However, due to the natural rubber structure, these elastomers are susceptible to heat, oxidation, and chemical compounds, which limits their potential use. In this paper, in order to study the behavior of natural rubber under thermo-oxidative aging, experiments, including continuous stress relaxation, creep, and intermittent tensile tests, are carried out on the samples. Based on the experimental results and using dynamic-network model, a mechanical-chemical-diffusion model is proposed to predict the changes in natural rubber properties during thermo-oxidative aging considering the effect of the natural rubber curing system. In the chemical part of the model, the two main process of aging, including chain scission and crosslinking, are modeled by using two internal variables. The proposed model is implemented using the finite element method to simulate experimental tests for the model verification. The comparisons demonstrate the proposed model ability to accurately simulate the various loading states under thermo-oxidative aging of natural rubber. [ABSTRACT FROM AUTHOR]

The performance of high-strength steel (HSS) welding joints is crucial for tubular structure design. This paper investigates the hysteretic performance of HSS square hollow section (SHS) T joints considering fracture behaviors. The hysteresis and tensile tests of the HSS SHS T joints and a comparative analysis of failure modes and bearing capacity are conducted. Parameter analysis is conducted based on the validated FE model considering fracture and elastoplastic constitutive relationship with a wide range of parameters covered, including the cross-sectional width ratio and the wall thickness ratio between brace and chord, and the width-thickness ratio of the chord, and the seam weld size of the joint connection. The results show that fracture behavior can affect the failure mode and bearing capacity of the joints, and it cannot be ignored in the hysteresis analysis process. The energy consumption capacity and the ductility coefficients increase when β increases from 0.2 to 1.0, τ increases from 0.3 to 1.0 and 2 γ decreases from 40 to 20. Meanwhile, joints' failure modes and residual strength vary with the above parameters. It is necessary to use the damage fracture constitutive model of steel in numerical simulation. [ABSTRACT FROM AUTHOR]

This study investigated the effectiveness of carbon fibre-reinforced polymer (CFRP) materials in strengthening the diagonal tension members of steel-truss bridges. Monotonic tensile and cyclic loading tests were performed on CFRP-strengthened specimens with variations in the CFRP-bonding range on the flanges. This study focused on the strengthening methods A and B, which were proposed to address insufficient CFRP anchoring near gusset plates by bonding CFRP sheets to both sides of the flanges of the diagonal tension members. The results of the monotonic tensile loading tests indicated a significant increase in tensile stiffness and substantial improvements in yield strength (27%) and ultimate load-bearing capacity (51%) when the strengthening methods A and B were employed. Delamination of the bonded CFRP sheets was effectively delayed, occurring only after the steel yielded, owing to the use of a ductile adhesive (polyurea putty). On the other hand, the cyclic loading tests demonstrated a significant enhancement in the load-bearing capacities (33% for tensile, 32% for compressive) of the strengthened specimens. Moreover, the energy dissipation capacities of the specimens strengthened by methods A and B exhibited linear increases, with 12% and 14% higher values respectively than those of the non-strengthened specimen. Although the stiffnesses (tensile and compressive) of the strengthened specimens decreased in each loading loop, the strengthening methods A and B maintained the stiffness values at approximately 35% higher than those of the non-strengthened specimen. [ABSTRACT FROM AUTHOR]

One-step (F100) and three-step (F30-60-40) hot forging of Al0.35CoCrFeNi alloy was investigated to achieve a uniform equiaxed grain structure. In the as-cast and forged state, only a single-phase face-centered cubic structure was observed. The formation of twins, recrystallized and partially recrystallized grains in the volume of the samples was observed depending on used forging process. To predict uniform grain-size formation numerical simulation of the hot-forging process was used. The numerical model was calibrated and validated by means of measured compression experimental data of as-cast Al0.35CoCrFeNi alloy before forging. Thermal analysis using finite element analysis was used to simulate cooling of sample during the relocation from the furnace on the lower die. Simulations were run under different thermo-mechanical conditions and the regions for the formation of dynamically recrystallized grains were predicted. Room temperature mechanical properties were evaluated after F100 and F30-60-40 hot-forging process. The F30-60-40 hot forging optimized the grain size, which was evident in the very small dispersion of the room temperature mechanical properties in tension. Elongation after F30-60-40 hot forging increased by 17%. The correlation between temperature, equivalent stress, equivalent plastic strain, microstructure, tensile properties, and strain-hardening behavior is discussed. [ABSTRACT FROM AUTHOR]