Search

Vegetable transplanting operation has been wholly depended on human labor that needs 18.4 hrs per 10 acres in Korea. Since periods of vegetable transplanting operations are limited, their mechanization has been strongly demanded. This study was conducted to develop a transplanting device that was the core technology for vegetable transplanter. In order to find out transplanting track and velocity of transplanting device, a kinematic analysis software was employed. Evaluation of prototype was carried out in the circular soil bin with high speed camera. Rotary type transplanting device produced an elliptic loci when two links of different lengths were moving to the opposite direction. The length of two links was 75mm and 44mm, respectively. Maximum displacement of rotary type transplanting device was 238mm. It seemed that the transplanting elliptic loci of transplanting device were identical between the simulation output generated by kinematic analysis software and the circular soil bin test result with a high speed camera. The rotary type transplanting device can be suitable fur transplanting short height vegetable, less than 20 cm length vegetables such as Chinese cabbage and cabbage, etc.

Manual transplanting Chinese cabbage needs 184 hours per ha in Korea. Mechanization of Chinese cabbage transplanting operation has been highly required because it needs highly intensive labor during peak season. This study was conducted to developed walking-type Chinese cabbage transplanter. In order to find out design factor of the transplanter, a kinematic analysis software, RecurDyn, was used. The prototype was tested in the circular soil bin and its operating motion was captured and analyzed using high speed camera system. Prototype was one row type which utilized original parts of engine, transmission and etc. from walking-type rice transplanter in order to save the manufacturing cost. Success ratio of pick-up device of hole-pin type and latch type were and , respectively. which was highly affected by feeding accuracy of feeding device of seedling. Transplanting device of the prototype produced a elliptic loci which were coincident with those produced by the computer simulation. Prototype proved good performance in transplanting with mulching and without mulching operation, either. Working performance of prototype was 22 hours per ha and operation cost of the prototype was 961,757 won per ha. So, it would reduce of the labor and of operation cost.

Existing concurrency control algorithms do not conform well to various environments in the performance perspective. Each algorithm has some assumption on the conflict characteristic of its execution environment, and its performance degrades when the assumption fails. A per-object hybrid scheme integrating a two phase locking algorithm with a parallel validation technique is presented to solve this problem. Read and write accesses on each database object are controlled by one algorithm at a time. This controlling algorithm can alter while transactions are running, in order to enhance the overall system performance. In the simulation study, the proposed scheme with the proposed algorithm alteration strategy is shown to conform well to various execution environments, better than both the two phase locking algorithm and the parallel validation technique.

The phenomena of supercritical fluid extraction (SFE) and its reverse effect, which is known as retrograde condensation (RC), have found new and important applications in industrial separation of chemical compounds and recovery and processing of natural products and fossil fuels. Full-scale industrial utilization of SFE/RC processes requires knowledge about thermodynamic and transport characteristics of the asymmetric mixtures involved and the development of predictive modeling and correlation techniques for performance of the SFE/RC system under consideration. In this report, through the application of statistical mechanical techniques, the reasons for the lack of accuracy of existing predictive approaches are described and they are improved. It is demonstrated that these techniques also allow us to study the effect of mixed supercritical solvents on the solubility of heavy solutes (solids) at different compositions of the solvents, pressures, and temperatures. Fluid phase equilibrium algorithms based on the conformal solution van der Waals mixing rules and different equations of state are presented for the prediction of solubilities of heavy liquid in supercritical gases. It is shown that the Peng-Robinson equation of state based on conformal solution theory can predict solubilites of heavy liquid in supercritical gases more accurately than the van der Waals and Redlich-Kwong equations of state.