Search

We assess the magnetic field configuration in modern fusion devices by comparing experiments with the same heating power, between a stellarator and a heliotron. The key role of turbulence is evident in the optimized stellarator, while neoclassical processes largely determine the transport in the heliotron device. Gyrokinetic simulations elucidate the underlying mechanisms promoting stronger ion scale turbulence in the stellarator. Similar plasma performances in these experiments suggests that neoclassical and turbulent transport should both be optimized in next step reactor designs.

Electron Cyclotron Resonance Heating (ECRH) has contributed to the achievement of high performance plasma production, high electron temperature plasmas and sustainment of steady-state plasmas in the Large Helical Device (LHD). Our immediate targets of upgrading the ECRH system are 5 MW several seconds and 1 MW longer than one hour power injection into LHD. The improvement will greatly extend the plasma parameter regime. For that purpose, we have been promoting the development and installation of 77 GHz/1-1.5 MW/several seconds and 0.3 MW/CW gyrotrons in collaboration with University of Tsukuba. The transmission lines are re-examined and improved for high and CW power transmission. In the recent experimental campaign, two 77 GHz gyrotrons were operated. One more gyrotron, which was designed for 1.5 MW/2 s output, was constructed and is tested. We have been promoting to improve total ECRH efficiency for efficient gyrotron-power use and efficient plasma heating, e.g. a new waveguide alignment method and mode-content analysis and the feedback control of the injection polarization. In the last experimental campaign, the 77 GHz gyrotrons were used in combination with the existing 84 GHz range and 168 GHz gyrotrons. Multi-frequency ECRH system is more flexible in plasma heating experiments and diagnostics. A lot of experiments have been performed in relation to high electron temperature plasmas by realization of the core electron-root confinement (CERC), electron cyclotron current drive (ECCD), Electron Bernstein Wave heating, and steady-state plasma sustainment. Some of the experimental results are briefly described. © 2009 American Institute of Physics.

A comparison of characteristics between a nonlocal transport phenomenon and an electron internal transport barrier (ITB) in the Large Helical Device is performed with a transient transport analysis and from the viewpoint of a dynamic behavior of transport state. The electron ITB is characterized by a jump of electron temperature gradient. In contrast, the transient transport analysis indicates the nonlocal transport phenomenon is characterized by a jump of electron heat flux. And seen from the viewpoint of the dynamic behavior of transport state, the physical mechanism of the appearance of the nonlocal transport phenomenon is found to be qualitatively different from that of the formation of the electron ITB (© 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Production and heating of over-dense plasmas by 2.45 GHz microwave system under very low field condition was performed and demonstrated on CHS. In this experiment, microwave systems were arranged to aim at taking place mode conversion of launched electron cyclotron wave effectively into electron Bernstein wave (EBW). The power deposition profiles in produced over-dense plasmas were measured directly by using power modulation technique at various magnetic configurations. The power deposition took place dominantly in overdense region. To clarify wave trajectories, power absorption mechanism and mode conversion, a numerical analysis by a ray-tracing method was performed. Calculated ray-trajectories accessed to the region where the experimentally obtained deposition profile has a peak (© 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Edge cooling experiments with a tracer-encapsulated solid pellet in the large helical device (LHD) show a significant rise in core electron temperature (the maximum rise is around 1 keV) as well as in many tokamaks. This experimental result indicates the possible presence of the nonlocality of electron heat transport in plasmas where turbulence as a cause of anomalous transport dominates. The nonlocal electron temperature rise in the LHD takes place in almost the same parametric domain (e.g. in a low density) as in the tokamaks. Meanwhile, the experimental results of LHD show some new aspects of nonlocal electron temperature rise, for example the delay in the nonlocal rise of core electron temperature relative to the pellet penetration time increases with the increase both in the collisionality in the core plasma and the electron temperature gradient scale length in the outer region of the plasma.

Electron heat transport in the low-collisonality electron cyclotron heating plasma is investigated to clarify the effect of neoclassical transport optimization on the thermal plasma transport in the Large Helical Device (LHD). Five configurations are realized by shifting the magnetic axis position in major radius: 3.45, 3.53, 3.6, 3.75, and 3.9 m. A clear effective helical ripple (which is a quantitative measure of the neoclassical transport optimization) dependency on the enhancement factor of the global energy confinement relative to ISS95 is observed. Local heat transport analyses show a higher electron temperature and a lower heat transport in the neoclassical transport optimized configuration at half the minor radius. The comparisons of the experimental total heat fluxes with that of the neoclassical transport by DCOM/ NNW suggest that the neoclassical transport plays a significant role in the heat transport and that the neoclassical transport optimization is effective in improving the plasma confinement in the low-collisionality LHD plasma.

The polarizer is one of the critical components in a high-power millimeter-wave transmission line. It requires full and highly efficient coverage of any polarization states, high-power tolerance, and low-loss feature. Polarizers with rounded shape at the edge of the periodic groove surface are designed and fabricated by the machining process for a mega-watt long-pulse millimeter-wave transmission line of the electron cyclotron resonance heating system in the large helical device. The groove shape of λ/8- and λ/4-type polarizers for an 82.7 GHz transmission line is optimally designed in an integral method developed in the vector theories of diffraction gratings so that the efficiency to realize any polarization state can be maximized. The dependence of the polarization states on the combination of the two polarizer rotation angles (Φλ/8, Φλ/4) is examined experimentally in a low-power test with the newly developed polarization monitor. The results show that the measured polarization characteristics are in good agreement with the calculated ones.

Vacuum Ultra Violet(VUV) emission from a 4 cm diameter 2 cm long compact ion source excited by 14 GHz microwave has been investigated. Intensity ratio of band spectrum emission near Ly-α to Ly-α line spectrum is determined from the measured spectrum. which shows preferential excitation of molecules near the entrance of microwave input power. The ratio does not depend strongly upon pressure nor the input microwave power when the intensity is integrated over the volume of the plasma. The spatial distribution of the spectrum intensity ratio exhibits concentrations near microwave inlet and the opposite side where the microwave matching structure is located. The ratio at these peripheral regions is about two times as high as that of the central region. The ratio increased in proportion to the ion source pressure up to about 3.0 Pa, indicating efficient production of high energy electrons by ECR up to this pressure.

A remote steering antenna was recently developed for electron cyclotron heating and current drive (ECH/ECCD) experiments on the TRIAM-1M tokamak. This is the first application of the remote steering antenna concept for ECH/ECCD experiments, which have conditions relevant to the International Thermonuclear Experimental Reactor (ITER). Fundamental ECH and ECCD experiments were conducted in the ITER frequency from the low field using this antenna system. In addition to the angles near 0°, the launcher was a symmetric direction antenna with an extended steering-angle capability of ±(8°–19°). The output beam from the antenna was a well-defined Gaussian with a proper steering angle. The Gaussian content and the steering-angle accuracy were 0.85 and −0.5°, respectively. The high power tests measured the antenna transmission efficiency at 0.90–0.94. The efficiencies obtained in the low and high power tests were consistent with the calculations using higher-order modes. In order to excite the pure O/X-modes in the oblique injection, two polarizers were used to control the elliptical polarization of the incident beam for the ECCD experiments. The fundamental O/X-mode ECH/ECCD was applied to lower hyrid current drive plasmas at the optimized incident polarization. In the X-mode experiment, at medium density (~1 × 1019 m−3), clear differences in the plasma current and the hard x-ray intensity were observed between the co- and counter-steering injections due to the ECCD effect on the coupling of forward fast electrons.

A long-pulse plasma discharge of more than 30 min duration was achieved on the Large Helical Device (LHD). A plasma of ne = 0.8 × 1019 m−3 and Ti0 = 2.0 keV was sustained with PICH = 0.52 MW, PECH = 0.1 MW and averaged PNBI = 0.067 MW. The total injected heating energy was 1.3 GJ. One of the keys to the success of the experiment was a dispersion of the local plasma heat load to divertors, accomplished by sweeping the magnetic axis inward and outward. Causes limiting the long pulse plasma discharge are discussed. An ion impurity penetration limited further long-pulse discharge in the 8th experimental campaign (2004).

In the Large Helical Device (LHD), two different divertor configurations, i.e. helical divertor (HD) and local island divertor (LID), are utilized to control the edge plasma. The HD with two X-points is an intrinsic divertor for heliotron devices, accompanied with a relatively thick ergodic layer outside the confinement region. Edge and divertor plasma behavior from low density to high density regimes is presented, referring to the divertor detachment. The effect of the ergodic layer on the edge transport is also discussed. On the other hand, the LID is an advanced divertor concept which realizes a high pumping efficiency by the combination of an externally induced magnetic island and a closed pumping system. Experimental results to confirm the fundamental divertor performance of the LID are presented.

A long-pulse plasma discharge for more than 30 min. was achieved on the Large Helical Device (LHD). A plasma of ne = 0.8× 1019 m−3 and Ti0 = 2.0 keV was sustained with PICH = 0.52 MW, PECH = 0.1 MW and averaged PNBI = 0.067 MW. Total injected heating energy was 1.3 GJ, which was a quarter of the prepared RF heating energy. One of the keys to the success of the experiment was a dispersion of the local plasma heat load to divertors, accomplished by shifting the magnetic axis inward and outward.

Transient transport experiments are performed in plasmas with and without internal transport barriers (ITB) on LHD and JT-60U. The dependence of χe on the electron temperature, Te, and on the electron temperature gradient, ∇Te, is analysed with an empirical non-linear heat transport model. In plasmas without an ITB, two different types of non-linearity of the electron heat transport are observed from cold/heat pulse propagation: the χe depends on Te and ∇Te in JT-60U, while the ∇Te dependence is weak in LHD. Inside the ITB region, there is none or weak ∇Te dependence both in LHD and JT-60U. Growth of the cold pulse driven by the negative Te dependence of χe is observed inside the ITB region (LHD) and near the boundary of the ITB region (JT-60U).

Two types of improved core confinement were observed during centrally focused electron cyclotron heating (ECH) into plasmas sustained by counter (CNTR) and Co neutral beam injections (NBI) in the Large Helical Device. The CNTR NBI plasma displayed transition phenomena to the high-electron-temperature state and had a clear electron internal transport barrier, while the Co NBI plasma did not show a clear transition or an ECH power threshold but showed broad high temperature profiles with moderate temperature gradient. This indicated that the Co NBI plasma with additional ECH also had an improved core confinement. The electron heat transport characteristics of these plasmas were directly investigated using heat pulse propagation excited by modulated ECH. These effects appear to be related to the m/n = 2/1 rational surface or the island induced by NBI beam-driven current.

In the Large Helical Device (LHD) programme, one of the key research issues is to enhance helical plasma performance through edge plasma control. For the first time in the LHD programme, the edge plasma control was performed with a local island divertor (LID) that is a closed divertor, utilizing an m/n = 1/1 island generated externally by which 20 small perturbation coils, and fundamental LID functions were demonstrated experimentally. It was found that the outward heat and particle fluxes crossing the island separatrix flow along the field lines to the rear of the divertor head, where carbon plates are placed to receive the heat and particle loads. Accordingly, high efficient pumping was demonstrated, which is considered to be the key in realizing high temperature divertor operations, resulting in an improvement in energy confinement. In this experiment, relatively good energy confinement is achieved in the high density regime at a magnetic axis position, Rax, of 3.75?m. Results of edge modelling are also presented by using the EMC3-EIRENE code.

High-Z plasmas have been produced with Ar and/or Ne gas fuelling to increase the ion temperature in Large Helical Device (LHD) plasmas heated with high-energy negative-ion-based neutral beam injection (NBI). Although the electron heating is dominant in the high-energy NBI heating, the direct ion heating power is significantly enhanced in low-density plasmas due to both an increase in the beam absorption (ionization) power and a reduction of the ion density in the high-Z plasmas. Intensive neon- and/or argon-glow discharge cleaning works well to suppress dilution of the high-Z plasmas with wall-absorbed hydrogen. As a result, the ion temperature increases with an increase in the ion heating power normalized by the ion density and reaches 10 keV. An increase in the ion temperature is also observed with the addition of centrally focused electron cyclotron resonance heating to a low-density and high-Z NBI plasma, suggesting improvement of the ion transport. The results obtained in the high-Z plasma experiments with high-energy NBI heating suggest that an increase in the direct ion heating power and improvement of the ion transport are essential to ion temperature rise, and that a high-ion temperature could be obtained as well in hydrogen plasmas with low-energy positive-NBI heating which is planned in the near future in the LHD.

A local island divertor (LID) experiment has begun on LHD, with the aims of controlling edge recycling and improving the plasma confinement. The fundamental divertor functions of the LID have been demonstrated in the recent experiments. From the particle flux profile measurements on the LID head it was found that the particles diffusing out from the core region are well guided along the island separatrix to the LID head. Owing to the closed configuration around the LID head, evidence of the high efficient pumping was observed, together with a strong capacity to screen impurities. The first results of edge modeling using the EMC3-EIRENE code are also presented.

This paper reports on the results of an experimental investigation into electron cyclotron resonance heating (ECRH) using the fundamental O-mode in the large helical device (LHD). The aim of the experiment is to understand the mechanism of the selective excitation of the O-mode EC wave and, thereby, optimize the performance of the ECRH. The polarization angle and the ellipticity of the electric field of the incident high power millimetre waves were varied in the experiment using a pair of grating polarizers. The responses of the plasma stored energy and electron temperature were measured to evaluate the effects. The optimum values of the polarization angle and the ellipticity for the ECRH were identified experimentally. A simple model of power branching between the O- and X-modes is introduced in order to interpret the observed experimental results. Specific to the ECRH in the LHD configuration, the effect of magnetic shear in the plasma peripheral region is considered.

The potential of continuous plasma sustainment of Large Helical Device (LHD) was successfully demonstrated by a one hour discharge with 110 kW electron cyclotron heating (ECH) power. The ECH power of frequency 84 GHz generated by a continuous-work (CW) gyrotron is transmitted through an evacuated waveguide transmission line and injected to the LHD vacuum vessel using waveguide antenna. The plasma density was kept at about 1.5 × 1018/m3 and the electron temperature at the plasma center over 1 keV. Due to the low injection power the density was not so high but the plasma was quite stable. The power injection was terminated manually at 3900 seconds from the limitation of the setting of data acquisition, not for any troubles on devices.

Transient transport experiments are performed in LHD plasma with electron internal transport barrier (e-ITB). Evidence for a reduction of electron heat diffusivity inside the ITB is observed from cold and heat pulse propagations. The observed enhancement of the cold pulse peak is explained by the temperature dependent electron heat diffusivity. The heat diffusivity inside the ITB decreases with an increase in the electron temperature in LHD.

Characteristics of MHD instabilities and their impacts on plasma confinement are studied in current free plasmas of the Large Helical Device. Spontaneous L?H transition is often observed in high beta plasmas close to 2% at low toroidal fields (Bt ? 0.75?T). The stored energy starts to rise rapidly just after the transition accompanying the clear rise in the electron density but quickly saturates due to the growth of the m = 2/n = 3 mode (m and n: poloidal and toroidal mode numbers), the rational surface of which is located in the edge barrier region, and edge localized mode (ELM) like activities having fairly small amplitude but high repetition frequency. Even in low beta plasmas without L?H transitions, ELM-like activities are sometimes induced in high performance plasmas with a steep edge pressure gradient and transiently reduce the stored energy up to 10%. Energetic ion driven MHD modes such as Alfv?n eigenmodes (AEs) are studied in a very wide range of characteristic parameters (the averaged beta of energetic ions, ?b?, and the ratio of energetic ion velocity to the Alfv?n velocity, Vb?/VA), of which range includes all tokamak data. In addition to the observation of toroidicity induced AEs (TAEs), coherent magnetic fluctuations of helicity induced AEs (HAEs) have been detected for the first time in NBI heated plasmas. The transition of a core-localized TAE to a global AE (GAE) is also observed in a discharge with temporal evolution of the rotational transform profile, having a similarity to the phenomenon observed in a reversed shear tokamak. At low magnetic fields, bursting TAEs transiently induce a significant loss of energetic ions, up to 40% of injected beams, but on the other hand play an important role in triggering the formation of transport barriers in the core and edge regions.

Significant progress has been made with ion cyclotron range of frequencies (ICRF) heating in the Large Helical Device. This is mainly due to better confinement of the helically trapped particles and less accumulation of impurities in the region of the plasma core. During the past two years, ICRF heating power has been increased from 1.35 to 2.7 MW. Various wave-mode tests were carried out using minority-ion heating, second-harmonic heating, slow-wave heating and high-density fast-wave heating at the fundamental cyclotron frequency. This fundamental heating mode extended the plasma density range of effective ICRF heating to a value of 1×1020 m−3. This use of the heating mode was its first successful application in large fusion devices. Using the minority-ion mode gave the best performance, and the stored energy reached 240 kJ using ICRF alone. This was obtained for the inward-shifted magnetic axis configuration. The improvement associated with the axis-shift was common for both bulk plasma and highly accelerated particles. For the minority-ion mode, high-energy ions up to 500 keV were observed by concentrating the heating power near the plasma axis. The confinement properties of high-energy particles were studied for different magnetic axis configurations, using the power-modulation technique. It confirmed that with the inward-shifted configuration the confinement of high-energy particles was better than with the normal configuration. By increasing the distance of the plasma to the vessel wall to about 2 cm, the impurity influx was sufficiently reduced to allow sustainment of the plasma with ICRF heating alone for more than 2 min.

Internal transport barriers with respect to electron thermal transport (eITB) were observed in the large helical device, when the electron cyclotron resonance heating (ECH) power was highly localized on the centre of a plasma sustained by neutral beam injection. The eITB is characterized by a high central electron temperature of 6–8 keV with an extremely steep gradient, as high as 55 keV m−1 and a low electron thermal diffusivity within a normalized average radius ρ≈0.3 as well as by the existence of clear thresholds for the ECH power and plasma collisionality.

Bolometer diagnostics are installed on the Large Helical Device (LHD) to provide measurements of the total (broad spectrum) electromagnetic radiation emitted by the plasma. Three types of detectors are used: resistive metal film bolometers, absolute extreme ultraviolet photodiodes and infrared imaging video bolometers. Details of the installation in LHD are given for each type of detector. The detector calibration, data analysis and tomography techniques are described and compared and sample results are shown.

The behaviour of high-energy ions accelerated by an ion cyclotron range of frequency (ICRF) electric field in the large helical device (LHD) is discussed. A better confinement performance of high-energy ions in the inward-shifted magnetic axis configuration was experimentally verified by measuring their energy spectrum and comparing it with the effective temperature determined by an electron slowing down process. In the standard magnetic axis configuration a saturation of the measured tail temperature was observed as the effective temperature was increased. The ratio between these two quantities is a measure of the quality of transfer efficiency from high-energy ions to a bulk plasma; when this efficiency was compared with Monte Carlo simulations the results agreed fairly well. The ratio of the stored energy of the high-energy ions to that of the bulk plasma was measured using an ICRF heating power modulation method; it was deduced from phase differences between total and bulk plasma stored energies and the modulated ICRF heating power. The measured high energy fraction agreed with that calculated using the injected ICRF heating power, the transfer efficiency determined in the experiment and the confinement scaling of the LHD plasma.

Microwave scattering diagnostics are described that allow direct measurements of the turbulent processes in the high-temperature plasma of magnetic confinement systems. The first physical results are presented from fluctuation measurements carried out in 2000–2001 in three stellarators: L-2M (Institute of General Physics, Moscow), LHD (National Institute of Fusion Science, Toki), and TJ-II (CIEMAT, Madrid). Plasma density fluctuations in the axial (heating) regions of the L-2M and LHD stellarators were measured from microwave scattering at the fundamental harmonic of the heating gyrotron radiation. In the TJ-II stellarator, a separate 2-mm microwave source was used to produce a probing beam; the measurements were performed at the middle of the plasma radius. Characteristic features of fluctuations, common for all three devices, are revealed by the methods of statistical and spectral analysis. These features are the wide frequency Fourier and wavelet spectra, autocorrelation functions with slowly decreasing tails, and non-Gaussian probability distributions of the magnitudes and the increments in the magnitude of fluctuations. Observations showed the high level of coherence between turbulent fluctuations in the central region and at the edge of the L-2M plasma. The drift-dissipative instability and the instability driven by trapped electrons are examined as possible sources of turbulence in a high-temperature plasma.

Ion temperature at the plasma centre has been measured from Doppler broadening of Ti XXI (2.61 A) and Ar XVII (3.95 A) x-ray lines using a newly installed crystal spectrometer with CCD detector in ECH, NBI and ICRF plasmas of Large Helical Device (LHD). The ion temperature obtained in a range of 0.6 and 3.5 keV was analysed with electron density and compared with electron temperature. A new parameter range of Ti>Te was found in low-density (ne

Intrinsic impurity behaviour in neutral beam heated LHD long pulse discharges with a discharge duration of 10 s was investigated. Spectroscopic and bolometric measurements showed a remarkable temporal increase of core radiation due to metallic impurities. Central impurity accumulation was found in a narrow plasma density region (e = 1–3×1019 m−3) for both density ramp-up discharges and constant density discharges. In the density ramp-up discharges, high-Z impurities were accumulated in the low-density region and diffused out from the core plasma in the high-density region. The impurity behaviour was compared with neoclassical predictions.

The experimentally optimized magnetic field configuration of the Large Helical Device [A. Iiyoshi et al., Nucl. Fusion 39, 1245 (1999)], where the magnetic axis is shifted inward by 15 cm from the early theoretical prediction, reveals 50% better global energy confinement than the prediction of the scaling law. This configuration has been investigated further from the viewpoints of high energy particle confinement and magnetohydrodynamic (MHD) stability. The confinement of high energy ions is improved as expected. The minority heating of ion cyclotron range of frequency was successful and the heating efficiency was improved by the inward shift. The confinement of passing particles by neutral beam injection was also improved under low magnetic field strength, and there could be obtained an almost steady high beta discharge up to 3% in volume average. This was a surprising result because the observed pressure gradient exceeded the Mercier unstable limit. The observed MHD activities became as high as beta but they did not grow enough to deteriorate the confinement of high energy ions or the performance of the bulk plasma, which was still 50% better than the scaling. According to these favorable results, better performance would be expected by increasing the heating power because the neoclassical transport can also be improved there.

Enhancement of the output power per gyrotron has been planned in the Large Helical Device (LHD). Three 77-GHz gyrotrons with an output power of more than 1 MW have been operated. In addition, a high power gyrotron with the frequency of 154 GHz (1 MW/5 s, 0.5 MW/CW) was newly installed in 2012 and the total injection power of ECRH reached 4.6 MW. The operational regime of ECRH plasma on the LHD has been extended due to the upgraded ECRH system such as the central electron temperature T{sub e0} = 13.5 keV with n{sub e} = 1×10{sup 19}m{sup −3}. In the LHD, an electron-internal-transport barrier (e-ITB) related to the production of high T{sub e} plasmas has been realized by strongly centre-focused ECRH. The electron thermal confinement clearly improved inside the e-ITB. The radial electric field was measured using the heavy ion beam probe. The formation of the positive E{sub r} was observed in the core region, which well agreed with the prediction of the neoclassical transport theory. The energy confinement characteristics have been investigated in the ECRH plasmas. It was found that higher plasma stored energy and lower radiation power was realized in the outward configuration. The plasma stored energy of 530more » kJ with n{sub e} = 3.2×10{sup 19}m{sup −3}, which is the 1.7 times larger than the previous record in the ECRH plasma in the LHD, has been successfully achieved.« less

Long-pulse discharge with the electron density ne0 of 1 × 1019 m−3, electron temperature Te0 of 2.5 keV, discharge length tdis of 19 minutes and heating power Pinject of 1MW, is demonstrated using the HAS antenna and the PA antenna for ion cyclotron heating (ICH) and increasing in the power of electron cyclotron heating (ECH). The HAS antenna is designed to phase dipole and excite ideal fast wave with parallel electric field kept small, and low impurity generation and accumulation are achieved on the steady-state discharge by weak parasitic heating around antennas. On the long-pulse discharge, the radiation measured by bolometer is kept smaller than 20% for injection power, and the heat load to divertor is approximately 60 % with low energetic particle losses. The heat load ratio to divertor is not as a function of injection power around 1MW, and energy confinement has been kept during the steady-state discharge.

During the first two years of the LHD experiment the following results have been achieved: (i) higher Te (Te(0) = 4.4 keV at ne = 5.3 × 1018 m-3 and Pabs = 1.8 MW); (ii) higher confinement (τE = 0.3 s, Te(0) = 1.1 keV at ne = 6.5 × 1019 m-3 and Pabs = 2.0 MW); (iii) higher stored energy, Wpdia = 880 kJ at B = 2.75 T. High performance plasmas have been realized in the inward shifted magnetic axis configuration (R = 3.6 m) where helical symmetry is recovered and the particle orbit properties are improved by a trade-off of MHD stability properties due to the appearance of a magnetic hill. Energy confinement was systematically higher than that predicted by the International Stellarator Scaling 95 by up to a factor of 1.6 and was comparable with the ELMy H mode confinement capability in tokamaks. This confinement improvement is attributed to configuration control (inward shift of the magnetic axis) and to the formation of a high edge temperature. The average beta value achieved reached 2.4% at B = 1.3 T, the highest beta value ever obtained in a helical device, and so far no degradation of confinement by MHD phenomena has been observed. The inward shifted configuration has also led to successful ICRF minority ion heating. ICRF powers up to 1.3 MW were reliably injected into the plasma without significant impurity contamination, and a plasma with a stored energy of 200 kJ was sustained for 5 s by ICRF alone. As another important result, long pulse discharges of more than 1 min were successfully achieved separately with an NBI heating of 0.5 MW and with an ICRF heating of 0.85 MW.

A large helical device (LHD) experiment began at the end of March 1998. Fundamental and second harmonic electron cyclotron heating (ECH) are used as a plasma production and heating method with six gyrotrons whose frequencies are 82.6/84 and 168 GHz, respectively. Up to 0.9 MW power has been injected in LHD with long distance corrugated waveguide transmission systems. The maximum pulse width is achieved to 3.0 s/240 kW for the LHD experiments. Six antenna systems have been prepared at the horizontally and vertically elongated poloidal sections. The maximum stored energy using all six gyrotrons is 70 kJ at the averaged density of n e = 4 × 10 18 m -3 . The maximum central electron temperature T e0 = 3.5 keV is achieved at n e = 3 × 10 18 m -3 . The magnetic field structure in heliotron type devices like LHD, notably near the coil, is complicated. For this oblique injection, a wave is launched from the antenna, and then crosses the plasma in the complex field structure near the coil. The polarization ellipse of the wave is changed along the ray-path. The wave propagation in heliotron type devices has been analyzed in an ideal case that the magnetic field component along the propagation direction can be neglected. Even for perpendicular injection with our antenna systems, the field component along the propagation direction is not so small. Another treatment of the wave-propagation is introduced. Some calculations for the heating scenario with this treatment are shown.

Transmission and reflection coefficients of hybrid modes in the sliding waveguide are discussed on the basis of mode matching method and multi-mode network theory. It is confirmed that the decrease in power of < 0.2% at 84 GHz is obtained for 2 cm in gap of the sliding waveguide which is composed of the corrugated waveguide with 88.9 mm diam. and the smooth-wall waveguide with 110 mm diam. At the sliding length near multi-half-wavelength in vacuum, transmission and reflection powers in the sliding waveguide change slightly, because the very small amount of standing wave in high higher-mode is produced resonantly in the gap.

Silicon nitride composite as a candidate of a window material for high power CW (Continuous Wave) millimeter-waves was high power tested especially with a surface cooling by impinging gas nitrogen jets on the single-disk surface. Gas-cooling dramatically suppressed the temperature of the window disk even with gas flow rate of around 100 l/min. With gas cooling of 465l/min., 130kW CW power of HE11 mode could be transmitted through the silicon nitride window with a diameter of 88.9mm. The peak window temperature was completely saturated on 123.6 °C. Without gas-cooling it did not saturate and reached 323 °C during 30 seconds pulse. A possibility of 1MW CW single disk Brewster windows with a forced gas-cooling is discussed, resulting in convinced prospects of the windows with realistic size and thickness.

The design and the experimental results of a 120GHz, TE15, 2, 1 mode gyrotron are presented. The determination of an output mode and the designs of a cavity and an electron gun are described in some detail. In the initial pulse test on the tube, the oscillation mode map and the output mode pattern experimentally obtained showed that the designed TE15, 2, 1 cavity mode was successfully excited. The highest output power was 610 kW, corresponding to an efficiency of 30.6%. This was achieved at a beam voltage of 831 kV and a beam current of 24 A. The peak efficiency was 32.2%, achieved at 83.1 kV and 18.9 A, resulting in an output power of 506 kW. The purity of the output mode was also measured by a k-spectrometer. The output mode spectrum included several parasitic modes in addition to the main TE15, 2, 1 mode.

Reversed-shear Alfven eigenmodes were observed for the first time in a helical plasma having negative q{sub 0}{sup ''} (the curvature of the safety factor q at the zero shear layer). The frequency is swept downward and upward sequentially via the time variation in the maximum of q. The eigenmodes calculated by ideal MHD theory are consistent with the experimental data. The frequency sweeping is mainly determined by the effects of energetic ions and the bulk pressure gradient. Coupling of reversed-shear Alfven eigenmodes with energetic ion driven geodesic acoustic modes generates a multitude of frequency-sweeping modes.

In the report, a backward wave oscillator (-100 GHz) was used as a local oscillator. In this work, a fast-switching local oscillator part in lower frequency range was built for higher time resolution. The lower frequency becomes wide-band in millimeter-wave range (-100 GHz) using millimeter multipliers. The local-frequency part plays an important role to determine the frequency switching-time, step-width and total range in the ECE measuremt. The frequency switching of the lower local-frequency part is mainly discussed in this report.

Demonstration of a long pulse or a steady state operation of ECH and sustainment of non‐collapsed plasma only by ECH is important in LHD from both the confinement device and the heating system engineering points of view. A gyrotron with a diamond output window is introduced and operated at the power level of 150 kW for more than 1 hour after modification of the cooling and evacuation system of the ECH transmission line. The power of about 110 kW injected into LHD is used to sustain the plasma with the electron density of 1.5 × 1018 m−3 and central temperature of more than 1.0 keV for 3900 sec. The gas puffing rate is carefully controlled so that the plasma density does not exceed the critical value above which the plasma collapsed for given injection power, magnetic configuration and wall condition of LHD. The results of gyrotron operation, transmission system modification for long pulse and optimizations of the magnetic field configuration of LHD and gas puffing for a given injection condition are discussed.

To study polarized radiative transfer of electron cyclotron waves, a general equation of polarization evolution that includes the effects of both birefringence and dichroism is dealt with. Full Stokes parameters are used to describe the polarization state and the absorption rate in the equation. The evolution equation on polarization state is able to treat general cases in which two polarization states of eigenmodes are not necessary to be orthogonal. Using this equation, a single absorption rate in second harmonic electron cyclotron heating is investigated on the Large Helical Device.

Power deposition profile is one of the essential keys in understanding the transport mechanism in high temperature low collisional plasma. Using the power modulation techniques, the power deposition profile and its change in shape and position by the focal position is clearly observed experimentally in Large Helical Device (LHD). These power deposition profiles show fairly in good agreement with the results from ray tracing calculation, as well as discrepancies arising from supra thermal electrons. Such experimentally deduced power deposition profiles are used as the initial inputs of one dimensional time dependent electron transport code for the further investigation of the plasma confinement.

We designed and constructed a gyrotron to generate submillimeter waves with the frequency of more than 1 THz at the second cyclotron harmonic. We selected the TE/sub 26,3,1/ mode in the experimental tube, which is less susceptible to the mode competition for THz emission at second harmonic operation. In the first experiment, several oscillations were observed at fundamental operation. The oscillation of which frequency reaches as high as 495 GHz is expected to be the TE/sub 9,3,2/ mode that is severely competitive with the second harmonic TE/sub 26,3,1/ mode at 1 THz. >

Summary form only given. Efficient, high-power millimeter-wave sources are needed in electron cyclotron heating (ECH) for many present and future fusion experiments. CPI, in collaboration with the National Institute of Fusion Sciences, Japan, is developing high-power, CW gyrotrons with an internal converter at 84 GHz for ECH in the Large Helical Device (LHD) Heliotron. The first prototype of this kind of tube has been tested to long pulse and 200 kW, CW. The second prototype has been fabricated and is currently being tested at CPI. In addition to the improved cooling and vacuum pumping capability of the present tube, it is designed to operate with a single stage depressed collector.

The time-of-flight neutral particle measurement system1 has been installed on the 10-O port at the 2nd campaign. It has the capability of two-dimensional measurement with a larger viewing angle by using the pivot on the rectangular port, which is set inside of the 10-O mother port. The movable stage with the vertical scan mechanism rotates on the fan shaped stainless rails around the pivot. The sight lines of −2 to 32 degrees against the 10-O port surface makes the angle between the sight line and the magnetic axis of the standard configuration (3.6 m) of 95 to 35 in the 4th campaign. Therefore the analyzer can observe high-energy particles with these pitch angles. The higher scan speed of 0.17 degree/second than that in the last campaign (0.05 degree/s) can be obtained in this campaign. Precise spatial distribution of the high-energy particles can be expected because it enables the continuous scanning in the long discharge.

Using a handshake shape (HAS) antenna phasing dipole for ion cyclotron heating (ICH), the heating efficiency was higher than that using a previous poloidal array antenna in the Large Helical Device. In order to sustain the dipole operation, real-time feedback for impedance matching and maintaining the same phase and power was adopted during long-pulse discharge. The HAS antenna was designed to reduce parasitic losses associated with energetic particle and radio-frequency (RF) sheath effects by field-aligned current concentration on the midplane. Local hot spots and the inhomogeneity of the diverter heat profile in the toroidal direction were reduced. The long-pulse discharge with an electron density (n e0) of 1?×?1019 m?3, center electron temperature (T e0) of 2.5?keV, a plasma duration time (t d) of 19?min, and RF heating power (P RF ) of 1?MW was achieved by ICH and electron cyclotron heating.

The plasma electrode structure of a 14 GHz ECR ion source was modified to enlarge the plasma volume of low electron temperature region. The result shows that the extracted beam current reached about 0.6 mA/cm(2) with about 40 W microwave power. To investigate the correlation between the volume of the low electron temperature region and the H(-) current, a vacuum ultraviolet (VUV) spectrometer had been installed to observe light emission in the VUV wavelength range from the plasma. From the results of the negative ion beam current and that from VUV spectrometry, production rate of vibrationally excited hydrogen molecule seems to be enhanced by increasing the volume of low electron temperature region.