Search

Electronic logbooks contain valuable information about activities and events concerning their associated particle accelerator facilities. However, the highly technical nature of logbook entries can hinder their usability and automation. As natural language processing (NLP) continues advancing, it offers opportunities to address various challenges that logbooks present. This work explores jointly testing a tailored Retrieval Augmented Generation (RAG) model for enhancing the usability of particle accelerator logbooks at institutes like DESY, BESSY, Fermilab, BNL, SLAC, LBNL, and CERN. The RAG model uses a corpus built on logbook contributions and aims to unlock insights from these logbooks by leveraging retrieval over facility datasets, including discussion about potential multimodal sources. Our goals are to increase the FAIR-ness (findability, accessibility, interoperability, and reusability) of logbooks by exploiting their information content to streamline everyday use, enable macro-analysis for root cause analysis, and facilitate problem-solving automation., Comment: 5 pages, 1 figure, 15th International Particle Accelerator Conference

Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al2O3 heterostructures compatible with micro-optoelectronic technologies are reported. Their structural and optical properties were determined by spectroscopic and microscopic techniques (XRR, XPS, HRTEM, spectroscopic ellipsometry, and UV/VIS/NIR spectrophotometry). The XRR and HRTEM analyses reveal a layer-by-layer growth mechanism of Ir in atomic scale heterostructures, which is different from the typical island-type growth of metals on dielectrics. Alongside, XPS investigations imply the formation of Ir-O-Al bonding at the interfaces for lower Ir concentrations, in contrast to the nanoparticle core-shell structure formation. Precisely tuning the ratio of the constituents ensures the control of the dispersion profile along with a transition from effective dielectric to metallic heterostructures. The Ir coating thickness was varied ranging from a few {\AA} to films of about 7 nm in the heterostructures. The transition has been observed in the structures containing individual Ir coating thicknesses of about 2-4 nm. Following this, show epsilon-near-zero metamaterials with tunable dielectric constants by precisely varying the composition of such heterostructures. Overall, a comprehensive study on structural and optical properties of the metal-dielectric interface of Ir/Al2O3 heterostructures was addressed indicating an extension of the material portfolio available for optical system design.

Nonlinear optical phenomena enable novel photonic and optoelectronic applications. Especially metallic nanoparticles and thin films with nonlinear optical properties offer the potential for micro-optical system integration. For this purpose, new nonlinear materials need to be continuously identified, investigated, and utilized for nonlinear optical applications. While noble metal nanoparticles, nanostructures, and thin films of Ag and Au were widely studied, iridium (Ir) nanoparticles and ultra-thin films have not been investigated yet. Here, we present a combined theoretical and experimental study on the linear and nonlinear optical properties of Ir nanoparticles deposited by atomic layer deposition (ALD). Linear optical constants, i.e., the effective refractive index n and extinction coefficient k, were evaluated at different growth stages of nanoparticle formation. Both linear and nonlinear optical properties of these Ir ALD coatings were calculated theoretically using Bruggeman and Maxwell-Garnett theories. The third-order susceptibility of Ir nanoparticle samples was experimentally investigated using the Z-scan technique. Overall, our studies demonstrate the potential of ultrathin Ir NPs as an alternative nonlinear optical material at an atomic scale.

The serrodyne principle enables shifting the frequency of an electromagnetic signal by applying a linear phase ramp in the time domain [1]. This phenomenon has been exploited to frequency-shift signals in the radiofrequency (RF), microwave and optical region of the electromagnetic spectrum over ranges of up to a few GHz e.g. to analyse the Doppler shift of RF signals, for noise suppression and frequency stabilization [2-9]. Here, we employ this principle to shift the center frequency of high power femtosecond laser pulses over a range of several THz with the help of a nonlinear multi-pass cell. We demonstrate our method experimentally by shifting the central wavelength of a state-of-the-art 75 W frequency comb laser from 1030\,nm to 1060\,nm and to 1000\,nm. Furthermore, we experimentally show that this wavelength shifting technique supports coherence characteristics at the few Hz-level while improving the temporal pulse quality. The technique is generally applicable to wide parameter ranges and different laser systems, enabling efficient wavelength conversion of high-power lasers to spectral regions beyond the gain bandwidth of available laser platforms.

Quantum communication has seen rapid progress towards practical large-scale networks, with quantum key distribution (QKD) spearheading this development. While fibre based systems have been shown to be well suited for metropolitan scales, suitable fibre infrastructure may not always be in place. Here, we make the case for an entanglement-based free-space quantum network as a practical and efficient alternative for metropolitan applications. We developed a deployable free space QKD system and demonstrated its use in realistic scenarios. For a representative 1.7-km free-space link, we showcase its ad hoc deployability and achieve secure key rates of up to 5.7 kbps, with 2.5 kbps in direct noon sunlight. By extrapolating experimental data, we show that kbps key rates are achievable even for 10-km distances and multi-user scenarios. We anticipate that our work will establish free space networks as a viable solution for metropolitan applications and an indispensable complementary building block in the future global quantum internet., Comment: Expanded analysis, improved plots, added information that further supports our claims; results unchanged

We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz repetition rate with an excellent beam quality. Additionally, <500 fs pulses with up to 600 uJ of pulse energy were also realized with this setup. This architecture is intrinsically power scalable by increasing the number of cores in the fiber.

Post-compression of ultra-short laser pulses via self-phase modulation is routinely employed for the generation of laser pulses with optical bandwidths reaching far beyond the laser gain limitations. While high compression factors can be routinely achieved, the compressed pulses typically suffer from temporal quality degradation. We numerically and experimentally analyze the deterioration of different measures of temporal quality with increasing compression factor and show how appropriate dispersion management and cascading of the post-compression process can be employed to limit the impact of this effect. The demonstrated saturation of pulse quality degradation at large compression factors puts novel femtosecond laser architectures based on post-compressed pico- or even nanosecond laser systems in sight.

The Free-Electron Laser (FEL) FLASH offers the worldwide still unique capability to study ultrafast processes with high-flux, high-repetition rate XUV and soft X-ray pulses. The vast majority of experiments at FLASH are of pump-probe type. Many of them rely on optical ultrafast lasers. Here, a novel FEL facility laser is reported which combines high average power output from Yb:YAG amplifiers with spectral broadening in a Herriott-type multi-pass cell and subsequent pulse compression to sub-100 fs durations. Compared to other facility lasers employing optical parametric amplification, the new system comes with significantly improved noise figures, compactness, simplicity and power efficiency. Like FLASH, the optical laser operates with 10 Hz burst repetition rate. The bursts consist of 800 $\mu$s long trains of up to 800 ultrashort pulses being synchronized to the FEL with femtosecond precision. In the experimental chamber, pulses with up to 50 $\mu$J energy, 60 fs FWHM duration and 1 MHz rate at 1.03 $\mu$m wavelength are available and can be adjusted by computer-control. Moreover, nonlinear polarization rotation is implemented to improve laser pulse contrast. First cross-correlation measurements with the FEL at the plane-grating monochromator photon beamline are demonstrated, exhibiting the suitability of the laser for user experiments at FLASH., Comment: 28 pages, 13 figures

In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore with a newly developed fiber we report on 4.4 kW of single-mode output power at 40 cm bend diameter.

We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber (minimizing signal light in the fiber cladding) and direct water cooling. Dual transverse mode operation is visible from the optical spectrum and can also be deduced from the measured beam quality of M^2 = 2.6. \c{opyright} 2016 Optical Society of America under Open Access Publishing Agreement. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved.

We report on detailed in-situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the TMI-threshold of a commercial LMA fiber with 25 micron core and 400 micron cladding was measured at various seed wavelengths. By matching these results with detailed simulations we show that photodarkening has a negligible impact on the thermal load and, therefore, on the TMI threshold in this fiber.

A simplification strategy for Segmented Mirror Splitters (SMS) used as beam combiners is presented. These devices are useful for compact beam division and combination of linear and 2-D arrays. However, the standard design requires unique thin-film coating sections for each input beam and thus potential for scaling to high beam-counts is limited due to manufacturing complexity. Taking advantage of the relative insensitivity of the beam combination process to amplitude variations, numerical techniques are used to optimize highly-simplified designs with only one, two or three unique coatings. It is demonstrated that with correctly chosen coating reflectivities, the simplified optics are capable of high combination efficiency for several tens of beams. The performance of these optics as beamsplitters in multicore fiber amplifier systems is analyzed, and inhomogeneous power distribution of the simplified designs is noted as a potential source of combining loss in such systems. These simplified designs may facilitate further scaling of filled-aperture coherently combined systems., Comment: 11 pages, 7 figures

The pulse-energy scaling technique electro-optically controlled divided-pulse amplification is implemented in a high-power ultrafast fiber laser system based on coherent beam combination. A fiber-integrated front end and a multi-pass cell based back end allow for a small footprint and a modular implementation. Bursts of 8 pulses are amplified parallel in up to 12 ytterbium-doped large-pitch fiber amplifiers. Subsequent spatio-temporal coherent combination of the 96 total amplified pulse replicas to a single pulse results in a pulse energy of 23 mJ at an average power of 674 W, compressible to a pulse duration of 235 fs. To the best of our knowledge, this is the highest pulse energy ever accomplished with a fiber CPA system.

A novel technique for divided-pulse amplification is presented in a proof-of-principle experiment. A pulse burst, cut out of the pulse train of a mode-locked oscillator, is amplified and temporally combined into a single pulse. High combination efficiency and excellent pulse contrast are demonstrated. The system is mostly fiber-coupled, enabling a high interferometric stability. This approach provides access to the amplitude and phase of the individual pulses in the burst to be amplified, potentially allowing the compensation of gain saturation and nonlinear phase mismatches within the burst. Therefore, this technique enables the scaling of the peak power and pulse energy of pulsed laser systems beyond currently prevailing limitations.

We present a novel approach for temporal contrast enhancement of energetic laserpulses by filtered SPM broadened spectra. A measured temporal contrast enhancement by at least 7 orders of magnitude in a simple setup has been achieved. This technique is applicable to a wide range of laser parameters and poses a highly efficient alternative to existing contrast-enhancement methods.

An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise performance are confirmed. The laser has proven suitable for demanding scientific applications. Further power scaling is possible right away using even more amplifier channels

We present an ultrafast fiber laser system delivering 4.6 W average power at 258 nm based on two-stage fourth-harmonic generation in beta barium borate (BBO). The beam quality is close to diffraction limited with an M2- value of 1.3 x 1.6. The pulse duration is 150 fs, which potentially is compressible down to 40 fs. A plain BBO and a Sapphire-BBO compound are compared with respect to the achievable beam quality in the conversion process. This laser is applicable in scientific and industrial fields. Further scaling to higher average power is discussed

An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam quality (M2<=1.2), and a low relative intensity noise of 0.56% in the frequency range of from 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hands-off operation.

An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam quality is excellent (M2<1.24x1.10) and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable as it features an automated spatial and temporal alignment of the interferometric amplification channels.

We present a novel phase locking scheme for the coherent combination of beam arrays in the filled aperture configuration. Employing a phase dithering mechanism for the different beams similar to LOCSET, dithering frequencies for sequential combination steps are reused. By applying an additional phase alternating scheme, this allows to use standard synchronized multichannel lock-in electronics for phase locking a large number of channels even when the frequency bandwidth of the employed phase actuators is limited.

We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%.

Few-cycle lasers are essential for many research areas such as attosecond physics that promises to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the underlying laser technology. Here, two-stage nonlinear compression of a 660 W femtosecond fiber laser system is utilized to achieve unprecedented average power levels of energetic ultrashort or even few-cycle laser pulses. In a first compression step 408 W, 320 uJ, 30fs pulses are achieved, which can be further compressed to 216 W, 170 uJ, 6.3 fs pulses in a second compression stage. This is the highest average power few-cycle laser system presented so far. It is expected to significantly advance the fields of high harmonic generation and attosecond science.

The performance of fiber laser systems has drastically increased over recent decades, which has opened up new industrial and scientific applications for this technology. However, currently a number of physical effects prevents further power scaling. Coherent combination of beams from multiple emitters has been established as a power scaling technique beyond these limitations. It is possible to increase the average power and, for pulsed laser systems, also parameters such as the pulse energy and the peak power. To realize such laser systems, various aspects have to be taken into account which include beam combination elements, stabilization systems and the output parameters of the individual amplifiers. After an introduction to the topic, various ways of implementing coherent beam combination for ultrashort pulses are explored. Besides the spatial combination of beams, the combination of pulses in time will also be discussed. Recent experimental results will be presented, including multi-dimensional (i.e. spatial and temporal) combination. Finally, an outlook on possible further developments is given, focused on scaling the number of combinable beams and pulses.

Laser cooling of a solid is achieved when a coherent laser illuminates the material, and the heat is extracted by resulting anti-Stokes fluorescence. Over the past year, net solid-state laser cooling was successfully demonstrated for the first time in Yb-doped silica glass in both bulk samples and fibers. Here, we improve the previously published results by one order of magnitude and report more than 6K of cooling below the ambient temperature. This result is the lowest temperature achieved in solid-state laser cooling of silica glass to date to the best of our knowledge. We present details on the experiment performed using a 20W laser operating at 1035nm wavelength and temperature measurements using both a thermal camera and the differential luminescence thermometry technique.

Fiber lasers entered numerous applications due to their high efficiency and superior stability. Particularly in space, those lasers have to fulfill additional requirements set by the harsh environment, typically characterized by large temperature gradients, vibration and shock as well as different kinds of radiation. In this contribution, we will report on the development and realization of a fiber laser intended to operate as part of a Rendezvous and Docking 3D-Lidar system considering the aforementioned specialties. Power scaling of pulsed as well as continuous-wave fiber lasers is yet another way to exploit new application fields in space., Comment: 4 pages, 8 figures

We investigate the frequency-resolved intensity noise spectrum of an Yb-doped fiber amplifier down to the fundamental limit of quantum noise. We focus on the kHz and low MHz frequency regime with special interest in the region between 1 and 10 kHz. Intensity noise levels up to >60 dB above the shot noise limit are found, revealing great optimization potential. Additionally, two seed lasers with different noise characteristics were amplified, showing that the seed source has a significant impact and should be considered in the design of high power fiber amplifiers.

This article presents a new and individual way to generate opto-mechanical components by Additive Manufacturing, embedded in an established process chain for the fabrication of metal optics. The freedom of design offered by additive techniques gives the opportunity to produce more lightweight parts with improved mechanical stability. The latter is demonstrated by simulations of several models of metal mirrors with a constant outer shape but varying mass reduction factors. The optimized lightweight mirror exhibits $63.5 \%$ of mass reduction and a higher stiffness compared to conventional designs, but it is not manufacturable by cutting techniques. Utilizing Selective Laser Melting instead, a demonstrator of the mentioned topological non-trivial design is manufactured out of AlSi12 alloy powder. It is further shown that -- like in case of a traditional manufactured mirror substrate -- optical quality can be achieved by diamond turning, electroless nickel plating, and polishing techniques, which finally results in $< 150$~nm peak-to-valley shape deviation and a roughness of $< 1$~nm rms in a measurement area of $140 \times 110$ $\mu$m${}^2$. Negative implications from the additive manufacturing are shown to be negligible. Further it is shown that surface form is maintained over a two year storage period under ambient conditions., Comment: 13 pages, 19 figures, online version (corrected proof)

Compact, ultra-high-speed self-bearing permanent-magnet motors enable a wide scope of applications including an increasing number of optical ones. For implementation in an optical setup the rotors have to satisfy high demands regarding their velocity and pointing errors. Only a restricted number of measurements of these parameters exist and only at relatively low velocities. This manuscript presents the measurement of the velocity and pointing errors at rotation frequencies up to 5 kHz. The acquired data allows to identify the rotor drive as the main source of velocity variations with fast fluctuations of up to 3.4 ns (RMS) and slow drifts of 23 ns (RMS) over ~120 revolutions at 5 kHz in vacuum. At the same rotation frequency the pointing fluctuated by 12 $\mu$rad (RMS) and 33 $\mu$rad (peak-to-peak) over ~10000 roundtrips. To our best knowledge this states the first measurement of velocity and pointing errors at multi-kHz rotation frequencies and will allow potential adopters to evaluate the feasibility of such rotor drives for their application.