Search

Abstract: The introduction of chiral organic spacers in low‐dimensional metal‐halide perovskites triggers chiroptical activity, which is appealing for spintronic applications. However, a comprehensive understanding of structure formation and the ability to control phase purity in such materials have yet to be developed. Herein, the impact of processing conditions on the phase purity, microstructure, and chiroptical properties of chiral 2D perovskites is explored. The anisotropic emergence of a 1D perovskite inside the 2D matrix and its dependence on the organic cation chirality, solvent, and thermal annealing conditions are shown. By controlling these parameters, the in‐plane conductivity of the films is nearly doubled. Furthermore, it is demonstrated, for the first time, that solvent choice and the spatial configuration of the organic cation can have an impact on the residual lattice strain and the energetic disorder of the system. The fundamentals presented here can help to improve the film deposition methods for low‐dimensional chiral perovskites, offering strategies to control phase purity.

Abstract Open research data refer to publicly available scientific information that can be accessed free of charge, usually provided by public data sources. Users must comply with specific requirements set by the institutions providing the data and always acknowledge the source of the data when processing, transmitting, storing or publishing it. One of the tasks of the BrineRIS project is the mapping of brine resources, requiring reliable data on the location of exploration facilities, environmental characteristics, brine exploitation parameters and formal and legal information. These data come from a review of various archives, databases and survey results. Initially, information on the location of the sources should be obtained, which may be available in publicly accessible databases. Next, geological and hydrogeological parameters, which can be obtained from scientific papers and reports, are useful. An important part of the project is also the analysis of legal regulations concerning water extraction and environmental protection. Therefore, data should be obtained from various sources, such as public administration, state institutions or research units. These will serve to develop the database needed to perform further analyses within the BrineRIS research project. It is therefore crucial to carefully collect, analyse and assess the usefulness of the data.

In this paper, novel application possibilities of CuO nanoparticles were investigated in SAC0307 solder alloy for composite soldering purposes. CuO nanoparticles in 0.25 and 0.5 wt% were mixed into the solder paste to produce composite solder joints. Solder joints were manufactured using standard surface mounting technology from different solder pastes. The solder joints were loaded in an 85 °C/85RH% temperature and humidity test for 4000 h. It was found that the CuO composite solder joints showed improved mechanical quality due to the microstructural refinement, which was studied using scanning electron microscopy (SEM) and focused ion beam (FIB) analysis. On the other hand, the corrosion resistance of CuO joints decreased, as they suffered localized corrosion extensively, which produced longer and more Sn whiskers on their surface than on the reference SAC0307. Density functional theory (DFT) calculations proved that CuO can bond to Sn, but CuO is not chemically inert in the solder bulk. CuO can start a cyclic reaction with the dispersed Cu6Sn5 intermetallics, which produces SnO2 in the solder bulk, ultimately enhancing corrosion. Therefore, CuO nanoparticles are suggested to be applied only in non-corrosive environments, such as space applications.

Using in situ photoluminescence measurements during the spin-coating and annealing steps, this study probes the formation of 2D layers on 3D triple cation perovskite films comparing phenylethylammonium and 2-thiophenemethylammonium iodide bulky cations. This study elucidates the formation mechanisms of the surface layers for both cases and reveals two regimes during 2D layer formation: a kinetic-driven and a thermodynamic-driven process. These driving forces result in different compositions of the 2D/3D interface for each treatment, namely, different ratios of pure 2D (n = 1) and quasi-2D (n > 1) structures. This study shows that a higher ratio of quasi-2D phases is more beneficial for device performance, as pure-2D layers may hamper current extraction. Due to a more evenly distributed formation energy profile among 2D and quasi-2D phases, highly concentrated 2-thiophenemethylammonium iodide appears to be more suited for effective surface passivation than its phenylethylammonium analog.

ABSTRACT How best to classify musical medium of performance? We welcome the advice and expertise of the community of Notes readers to inform our deliberations. Specifically, when referring to the [...]

Aim: The aim of this article is to present the existing formal and legal conditions related to the placing on the market and using in the national market of pumps and pump kits – both fire pumps and those intended for firefighting water supply systems. The paper also discusses other selected regulations relating to the product group in question. In addition, an issue not arising from the construction regulations, but equally important in terms of ensuring an adequate level of safety in buildings, was raised, i.e. the admittance of control panels for firefighting equipment (in this case pumps), which can form an integral part of the pump kits in question. The results of the analysis can also be applied to other selected products in the area of fire protection and the requirements that these products must meet before they can be placed on the market and put into use. Introduction: Fire water systems are among the most commonly used fire extinguishing systems in buildings. Despite their popularity, quite often investors, designers and users of buildings, as well as the manufacturers of pump kits themselves, have doubts about the requirements for placing these products on the market. The authors’ discussion of the current requirements is intended to consolidate knowledge in this area, clarify the marketing of construction products and resolve possible doubts. Methodology: The publication uses the results of the authors’ own analysis on the basis of the interpretation of the legislation, as well as available normative and literature sources. Conclusions: The analysis shows that fire pumps and pump kits are covered by the obligation to carry out national assessment and verification of constancy of performance in system 1 and to draw up a national declaration of performance as well as to mark the product with a construction mark (before placing it on the market or making it available on the national market). Moreover, from 1 January 2021, the obligation under consideration was extended to pumps for fire water supply systems, and from 1 July 2022 also to pump kits for fire water supply systems. Furthermore, it was pointed out that the sub-assembly acting as the control panel for the firefighting equipment, insofar as it is present in the pump kits in question, is also subject to admittance Keywords: fire pumps, pumps for firefighting water supply systems, “B” construction mark, national technical assessment

The digitalization of the aesthetic experience influences the quality of participation in musical arts. Due to differences in perception among consumers of musical arts belonging to particular generations, this study aims to assess the influence of the participation form (in-person or digital) in the aesthetic situation. The COVID-19 pandemic forced the common digitalization of the aesthetic situation and catalyzed broad research on all art disciplines. Qualitative data analysis (based on ten criteria) constructed on an international sample concludes that the form in which one participates in musical arts determines the perception of quality in the aesthetic situation, which is assessed differently depending on one’s generation. Significant determinants exist among generations in participation in musical arts and between particular forms of participation. The research results should interest musical arts creators, managers, marketers, recipients, and researchers.

This paper provides a comprehensive overview of sport-related concussions, highlighting the critical importance of understanding their mechanisms, diagnosis, and management. Sport-related concussion is a frequent and complex pathology whose physiopathological mechanisms are not completely understood yet. Concussions, a subset of traumatic brain injuries, are prevalent in contact sports and pose significant risks to athletes' long-term health. The review covers the pathophysiology of concussions, emphasizing the biomechanical forces involved and the resultant neurological disruptions. Athletes seldom report concussive symptoms, which makes the diagnosis a challenge. Therefore, diagnostic challenges are explored, with a focus on clinical assessment tools, neuroimaging, and biomarkers. Additionally, the paper discusses current management strategies, including return-to-play protocols, and the role of education in concussion prevention. The review underscores the need for ongoing research to enhance diagnostic accuracy, improve treatment outcomes, and establish more effective prevention strategies, ultimately aiming to safeguard athletes' well-being.

Introduction: Erectile dysfunction (ED) represents a significant health problem that can have a negative impact on men's quality of life, intimate relationships and self-esteem. ED is a marker of overall health, requiring a comprehensive diagnostic and therapeutic approach. This article highlights the need for an integrated approach, in which lifestyle modifications are key to the successful treatment of erectile dysfunction. Aim of the study: The aim of this article is to provide a comprehensive review of the literature on erectile dysfunction, with the intention of improving understanding of the condition and providing directions for future research and clinical practice. Materials and methods: Electronic databases, including PubMed, Scopus, Web of Science, and Google Scholar, were searched to identify studies and literature reviews on erectile dysfunction (ED). The state of knowledge: This review examines the epidemiology, pathophysiology, and risk factors associated with ED, emphasizing the importance of lifestyle in prevention and treatment. The role of diet, physical activity, weight reduction, smoking cessation, and alcohol restriction in improving erectile function is discussed. The article also presents current diagnostic and therapeutic approaches, including pharmacotherapy, alternative therapies and psychological interventions. Conclusions: Erectile dysfunction (ED) is a complex health issue that necessitates a comprehensive and interdisciplinary diagnostic and therapeutic approach. Lifestyle plays a pivotal role in the prevention and treatment of ED, and its modification should be an integral component of any treatment plan.

Abstract Introduction: Depression is one of the most common and serious mental health disorders that negatively affects how you feel, think, and act. This syndrome is characterized by stress and emotion dysregulation, involving compromised structural integrity of frontal-limbic networks.It causes persistent feelings of sadness and a lack of interest in activities once enjoyed. Effective treatments, including therapy and medication, are available and can help manage the symptoms and improve quality of life. The aspect of physical activity as a component of depression treatment is currently being intensively studied. Purpose of work: This work provides a review of the knowledge on the relationship between physical activity and depression. Summary: Depression has a profound impact on the personal life, relationships, and work of those affected by the condition. Pharmacological and psychological interventions remain the cornerstone of treatment. However, these treatments do not produce the desired effects in all patients. This article presents the conclusion that physical exercise, as an alternative method for preventing and treating depression, is effective. The recent literature also suggests significant mental health benefits from being physically active, even at levels below the public health recommendations. Therefore, health practitioners should encourage any increase in physical activity to enhance mental health.

Skin cancers are the most common cancers and they are divided into two types: melanoma and non-melanoma skin cancers (NMSCs). Melanoma is the most lethal and aggressive type of skin cancer. The incidence of this type of cancer is increasing. Mortality from melanoma can be reduced by avoidance of exposure to ultraviolet radiation and regular skin examination. Materials and methods of research English-language scientific literature available in the PubMed and Google Scholar databases was reviewed using the following keywords: ”melanoma”; ”early-detection”; ”self-screening”; ”tanning”; ”sunscreen”; ”dermatoscopy”; ”mortality”; ”prevention”; ”risk-factors”; ”UV protection”; ”epidemiology”. Aim of the study The purpose of this narrative review is to present risk factors, prevention and the importance of early detection of melanoma. This review also shows that it is possible to increase people's awareness of skin self-examination and the importance of UV protection through the use of modern technology (text messaging). Conclusions There are many risk factors for melanoma. People's awareness of the risks of UV exposure from both sunbathing and tanning beds is increasing. More and more people are starting to protect themselves from the sun and regularly check their skin. This behavior reduces the risk of developing melanoma and increases the chances of detecting melanoma in its early stages.

Introduction and purpose: Prolactin is primarily associated with lactation and gonadal function, but it also has metabolic effects. Recent research shows prolactin's role in food intake, body weight, glucose, and lipid profile. Both low and excessive prolactin levels can lead to metabolic dysfunctions such as metabolic syndrome, type 2 DM, and dyslipidemia. Dopamine agonists, like cabergoline, used to treat hyperprolactinemia, may help balance metabolic homeostasis, likely due to their effect on prolactin. This study aims to synthesize current research on prolactin's metabolic effects, focusing on metabolic syndrome. State of knowledge: Metabolic syndrome is a cluster of dysfunctions like central obesity, atherogenic dyslipidemia, hypertension, and insulin resistance. It increases the risk of diabetes and cardiovascular diseases, affecting a quarter of the European population. Different combinations of metabolic syndrome components require various treatment approaches. New research focuses on prolactin and dopamine agonists in its pathogenesis and treatment. Materials and methods: This literature review is based on PubMed materials using keywords “prolactin,” “hyperprolactinemia,” “hypoprolactinemia,” “metabolic syndrome,” “diabetes mellitus,” “obesity.” Conclusions: This study highlights prolactin's importance in metabolic homeostasis, finding a positive correlation between both low and high prolactin levels and metabolic syndrome. However, gender differences and the pathogenesis of metabolic disorders should be further explored.

This literature review examines the pivotal role of physical activity in the treatment and rehabilitation of children with Fetal Alcohol Syndrome (FAS). By analysing a range of research studies, this review identifies the beneficial impact of structured physical activity programmes on motor skills, cognitive functions, and behavioural outcomes in children with FAS. Furthermore, it proposes educational recommendations for integrating physical activity into therapeutic interventions.

IntroductionDietary fiber is a key component of a healthy diet, associated with a reduced risk of cardiovascular disease, obesity, type 2 diabetes, certain cancers, chronic inflammation, or depression. The aim of the study was to perform an in-depth analysis of dietary fiber intake in the Polish population, taking account of the consumption of groups of products that are fiber sources and identify any age-related differences in the dietary fiber intake of the subjects.MethodsWe analyzed data obtained from two representative cross-sectional studies on the diet and nutritional status of adult Polish residents including the total of 4,000 individuals aged 19 years and more. Two 24-h recalls were used per individual to assess the diet using the computer-assisted personal interview (CAPI) technique. Total fiber content and fiber contained in cereal products, vegetables, fruits, legumes, nuts and seeds were calculated. Fiber intake was compared to the recommendations: 25 g/d for adults up to 65 years of age and 20 g/d for those aged 66 years and older. All statistical analyses, including the Pearson’s chi-squared test, the Student’s t-test, and the Analysis of Variance (ANOVA), were conducted using STATISTICA™ version 13.3, with the results being adjusted for demographic distribution biases to enhance the representativeness.ResultsThe average daily fiber intake was 17.83 ± 0.14 g/day (78% of the recommended intake), with 20.5% of respondents meeting the requirement. More men than women (27.05% vs. 14.3%;) met the requirement and men were characterized by a higher average intake (19.34 ± 0.20 g/day) than women (16.43 ± 0.19 g/day). The main fiber sources were cereals (44.1%), vegetables (23.6%), and fruits (16.0%). As regards men, the sources included refined bread (25.8%), vegetables (23.1%), and fruits (10.2%) and for women, they were vegetables (24.0%), fruits (17.2%), and refined bread (16.3%). Although refined bread is not recommended as a primary fiber source due to its lower fiber content compared to whole grain bread, its high consumption significantly contributed to the total fiber intake.ConclusionThe prevalence of widespread dietary fiber deficiency calls for the intensification of educational efforts that address the health advantages and sources of dietary fiber, as well as methods for its inclusion in daily meals.

Introduction: Adolescent alcohol abuse is a critical public health issue with far-reaching consequences for individual development and societal well-being. Adolescent alcohol consumption poses significant health risks, particularly due to its effects on brain development and its association with increased suicide risk. Purpose of the work: This study aims to investigate the relationship between alcohol abuse and suicide risk in adolescents. Materials and methods: A comprehensive analysis of research papers available on PubMed and Google Scholar was undertaken using the search terms including the following keywords: alcohol abuse/ alcohol abuse in adolescence/ alcohol consumption in adolescence/ alcohol abuse and suicide risk in adolescence/ suicide risk factors in adolescence/ suicidal tendencies among teenagers. Conclusions: Adolescent alcohol abuse has profound implications for brain development and mental health, significantly increasing the risk of suicide. Effective public health strategies, including early intervention, education, and strong support systems, are essential to mitigate these risks and promote healthier environments for young individuals. Addressing the underlying causes of alcohol abuse and providing targeted support can reduce its long-term consequences and improve adolescent well-being.

The estimation of Soil Organic Carbon (SOC), Total Nitrogen (TN), and Soil Water Storage (SWS) is crucial in comprehending ecosystem services and environmental sustainability. It plays a crucial role in guiding sustainable restoration strategies and supporting the long-term health of post-mining sites. Remote sensing technology provides valuable tools for modelling and mapping soil properties in reclaimed post-mining sites efficiently and cost-effectively. This study aimed to utilize remote sensing data to estimate SOC, TN, and SWS in a reclaimed post-mining site. Field data was collected from 130 research plots to obtain reference data for SOC, TN, and SWS from the Sonica hard coal post-mine spoil heap. Remote sensing data were: airborne laser scanning (ALS) point clouds and Planets cope satellite imageries. Generalized Additive Models (GAM) were used to develop predictive models. Wall-to-wall predictions of analyzed variables were performed. The results identified topographic and remote sensing indicators that significantly influence SOC, TN, and SWS. Digital Terrain Model (DTM), aspect, and blue spectral band are variables that explain SOC storage, with a significant influence of DTM, ranging from −8 to 18 Mg ha−1. TN was explained by DTM, Canopy Height Model (CHM), blue and Near Infrared (NIR) spectral bands, and Normalized Difference Vegetation Index (NDVI), mainly influenced by NIR and NDVI, ranging from −1.1 to 0.8 and −0.9 to 1.4 Mg ha−1, respectively. The values of Topographic Wetness Index (TWI), aspect, CHM, blue and NIR spectral bands explained SWS, highlighting their importance in assessing soil water dynamics in post-mining landscapes, with TWI and CHM being particularly influential, ranging from −2 to 5.1 and −6 to 2 mm, respectively. However, caution is advised when predicting SOC and TN using remote sensing in post-mining sites due to geogenic carbon considerations.

Objectives: The objective of the present study was to examine the diversity of Staphylococcus aureus from mastitis milk samples of cows in Rwanda. Methods: A total of 1080 quarter milk samples from 279 dairy cows were collected in 80 different farms from all five provinces of Rwanda. In total, 135 S. aureus isolates were obtained and subjected to genotyping (spa typing, DNA microarray, whole-genome sequencing (WGS)), antimicrobial susceptibility testing (AST) and phenotypic profiling by Fourier Transform Infrared (FTIR) spectroscopy (including capsular serotyping). Results: Resistance to penicillin and/or tetracycline was most frequently observed. Ten sequence types (STs) (ST1, ST151, ST152, ST5477, ST700, ST7110, ST7983, ST7984, ST8320, ST97) belonging to seven clonal complexes (CCs) (CC1, CC130, CC152, CC3591, CC3666, CC705, CC97) were detected. The Panton–Valentine leukocidin (PVL) genes (lukF-PV/lukS-PV), the bovine leukocidin genes (lukM/lukF-P83) and the human and bovine toxic shock syndrome toxin gene tst-1 variants were detected. FTIR-based capsular serotyping showed CC-specific differences. Most CC97 (cap5 allele) isolates were primarily nonencapsulated (82%), whereas isolates of CC3591 and CC3666 (cap8 allele) were mostly encapsulated (86.4% and 57.8%, respectively). Our results underline the widespread global distribution of cattle-adapted CC97. Conclusion: The presence of CC3591 and CC3666 in bovine mastitis suggests an important role in cattle health and dairy production in Rwanda. The results of the present study support the need for a rigorous One-Health Surveillance program of the bovine–human interface.

Introduction: As the number of scientific studies on lipid metabolism disorders increases, awareness among the medical community and the general population about the impact of hypercholesterolemia on the risk of cardiovascular diseases is growing. Elevated cholesterol levels in the blood are a major factor in the development of atherosclerosis, thereby increasing the likelihood of sudden cardiovascular events such as heart attacks or strokes. Maintaining normal cholesterol levels in the blood requires effective collaboration between the doctor and the patient, combining optimal pharmacotherapy with effective non-pharmacological methods based on the introduction of a balanced diet and moderate, regular physical activity. Current guidelines, based on numerous scientific studies, provide a clear framework for lipid-lowering treatment, with statins being an integral part. In cases where monotherapy is ineffective, ezetimibe and monoclonal antibodies, among others, can be used. In our work, we will discuss the possibilities of both non-pharmacological therapy and pharmacotherapy. Aim of the study: The aim of this study is to review current knowledge on non-pharmacological and pharmacological therapy in hypercholesterolemia. Material and method: This article presents the current state of knowledge about non-pharmacological and pharmacological therapy in hypercholesterolemia. Publications reviewed using the PubMed platform contain recent report in field of lipid metabolism disorders. The search included the keywords: ‚Hypercholesterolemia’, ‚LDL-C’, ‚Statin’, ,Ezetimibe’, ,PCSK9 inhibitors’.

Introduction Women who want to get pregnant soon often ask their doctors how to prepare best. During such a visit, doctors usually mention folic acid supplementation, a check-up with the dentist and gynaecologist or vaccinations. However, it is also worth pointing out the importance of lifestyle factors that affect fertility and fetal development. Modifying daily habits can improve fertility naturally and make getting pregnant faster. An increasing number of studies are being published on the importance of nutrition, physical activity, sleep, stress, stimulants and other factors on women's reproductive health. This article is a summary of the current state of knowledge in this area. Aim of the study The aim of this study is to review the literature and summarize current state of knowledge on the association between lifestyle factors and female reproductive function. Material and methods of research This literature review based on researches from PubMed platform. We searched articles describing connection between potentially modifiable lifestyle factors and women’s fertility. Search terms included keywords: „lifestyle”, „female fertility”, „obesity”, „sleep”, „nutrition”, „diet”, „stress”, „physical activity”, „smoking”, „alcohol”, „weight loss”, „reproductive health”.

The COVID-19 pandemic forced businesses to adapt to new conditions, affecting technology transfer networks, including the largest, the Enterprise Europe Network (EEN). The study aimed to compare the effectiveness of events organized by the EEN network in online and traditional formats. The analysis utilized data from all promotional events organized by EEN from 2020-2021. Several different measures of effectiveness were adopted, primarily referring to the number of meetings, the number of interested parties, and the number of entities that started cooperation. The results showed that online events were more effective than traditional ones, generating more meetings and signed agreements. These statistically significant results suggest that moving activities to the virtual space can be an effective model for future EEN activities. The research and results contribute significantly to the literature on digitizing business networks, demonstrating that online activities can surpass traditional methods in effectiveness. The results are crucial for network development strategies, indicating that digital tools can replace and even outperform traditional working methods, offering new opportunities for maintaining and developing international business cooperation.

We consider a decentralized formulation of the active hypothesis testing (AHT) problem, where multiple agents gather noisy observations from the environment with the purpose of identifying the correct hypothesis. At each time step, agents have the option to select a sampling action. These different actions result in observations drawn from various distributions, each associated with a specific hypothesis. The agents collaborate to accomplish the task, where message exchanges between agents are allowed over a rate-limited communications channel. The objective is to devise a multi-agent policy that minimizes the Bayes risk. This risk comprises both the cost of sampling and the joint terminal cost incurred by the agents upon making a hypothesis declaration. Deriving optimal structured policies for AHT problems is generally mathematically intractable, even in the context of a single agent. As a result, recent efforts have turned to deep learning methodologies to address these problems, which have exhibited significant success in single-agent learning scenarios. In this paper, we tackle the multi-agent AHT formulation by introducing a novel algorithm rooted in the framework of deep multi-agent reinforcement learning. This algorithm, named Multi-Agent Reinforcement Learning for AHT (MARLA), operates at each time step by having each agent map its state to an action (sampling rule or stopping rule) using a trained deep neural network with the goal of minimizing the Bayes risk. We present a comprehensive set of experimental results that effectively showcase the agents’ ability to learn collaborative strategies and enhance performance using MARLA. Furthermore, we demonstrate the superiority of MARLA over single-agent learning approaches. Finally, we provide an open-source implementation of the MARLA framework, for the benefit of researchers and developers in related domains.

This work aims to assess the possibility of using packaging industry waste to modify polypropylene products (PPs). The products were made in the form of extruded foil and injected samples. The products were produced using regranulate made of polypropylene cast foil. Maleic anhydride-modified polypropylene (MAPP) and polyolefin elastomer (POE) with a glycidyl ester functional group were used to modify the polypropylene. The samples were produced based on 50% foil waste reground and 50% pure PP. The rheological properties of the blends were assessed using the melt mass flow rate (MFR) technique; thermal properties using the differential scanning calorimetry method (DSC). The products manufactured using the injection molding method were subjected to an analysis of mechanical properties, such as tensile strength and impact strength. Also, in the case of film samples, tensile strength was assessed. Color-change assessments with CIE L*a*b* were carried out for all materials. Injection-molded products based on recycled metallized cast foil showed favorable mechanical properties such as tensile strength (1 MAPP = 26.7 MPa; 2 MAPP = 27.1 MPa), which was higher than the original material (cPP = 20.7 MPa). Also, for the films produced from regrind, the tensile strength was at a level similar (1 MAPP = 24.6 MPa; 2 MAPP/POE = 25.1 MPa) to the films extruded from virgin materials (cPP = 24.9 MPa). The introduction of a POE additive to the blends resulted in increased impact strength (1 MAPP/POE = 31 kJ/mol; 2MAPP/POE = 18 kJ/mol; 3 MAPP/POE = 11 kJ/mol) in relation to unmodified samples (cPP = 7 kJ/mol). The introduction of a POE additive to the tested mixtures improved the impact strength of the injected products by almost 4 times for sample 1 MAPP/POE and 2.5 times for sample 2 MAPP/POE in comparison to virgin cPP. These studies confirmed that foil waste can be successfully used to modify polypropylene products shaped both in the injection and extrusion processes.