Search

In order to contribute to the shift from petro-based chemistry to biobased chemistry, necessary to minimize the environmental impacts of the chemical industry, 2-methoxy-4-vinylphenol (4-vinyl guaiacol, 4VG) was used to synthesize a platform of biobased monomers. Thus, nine biobased monomers were successfully prepared. The synthesis procedures were investigated through the green metrics calculations in order to quantify the sustainability of our approaches. Their radical homopolymerization in toluene solution initiated by 2,2′-azobis(2-methylpropionitrile) (AIBN) was studied and the effect of residual 4VG as a radical inhibitor on the kinetics of polymerization was also explored. The new homopolymers were characterized by proton nuclear magnetic resonance (1H-NMR) spectroscopy, size exclusion chromatography and thermal analyses (dynamical scanning calorimetry DSC, thermal gravimetric analysis TGA). By varying the length of the alkyl ester or ether group of the 4VG derivatives, homopolymers with Tg ranging from 117 °C down to 5 °C were obtained. These new biobased monomers could be implemented in radical copolymerization as substitutes to petro-based monomers to decrease the carbon footprint of the resulting copolymers for various applications.

Cardanol, a waste from the food industry and widely produced (1 Mt/y), has been used as a chain stopper during the polycondensation of short oil alkyd resins in order to replace benzoic acid. Then, phosphorylated cardanol has been added in order to both reduce solvent content and bring flame-retardant (FR) properties to the alkyd resins. The renewable carbon content of the formulations has been increased up to 23%. The impact of the introduction of phosphorylated cardanol molecules on the drying time and flexibility has been studied as well as the thermal and flame-retardant properties by differential scanning calorimeter, thermogravimetric analysis and pyrolysis-combustion flow calorimeter. The most effective flame-retardant coating that was associated with excellent FR properties and excellent coating properties has been obtained with phosphate-cardanol added at 2%wt of P. Indeed, the film properties were closed to the classical alkyd resin, the solvent content was reduced by 50% and the pHRR decreased by 42% compared to the reference alkyd resin.

To develop an orthopedic scaffold that could overcome the limitations of implants used in clinics, we designed poly(ester-urethane) foams and compared their properties with those of a commercial gold standard. A degradable poly(ester-urethane) was synthetized by polyaddition between a diisocyanate poly(ε-caprolactone) prepolymer (PCL di-NCO, Mn = 2400 g·mol−1) and poly(lactic-co-glycolic acid) diol (PLGA, Mn = 2200 g·mol−1) acting as a chain extender. The resulting high-molecular-weight poly(ester-urethane) (PEU, Mn = 87,000 g·mol−1) was obtained and thoroughly characterized by NMR, FTIR and SEC-MALS. The porous scaffolds were then processed using the solvent casting (SC)/particle leaching (PL) method with different NaCl crystal concentrations. The morphology, pore size and porosity of the foams were evaluated using SEM, showing interconnected pores with a uniform size of around 150 µm. The mechanical properties of the scaffolds are close to those of the human meniscus (Ey = 0.5~1 MPa). Their degradation under accelerated conditions confirms that incorporating PLGA into the scaffolds greatly accelerates their degradation rate compared to the gold-standard implant. Finally, a cytotoxicity study confirmed the absence of the cytotoxicity of the PEU, with a 90% viability of the L929 cells. These results suggest that degradable porous PLGA/PCL poly(ester-urethane) has potential in the development of meniscal implants.

Due to growing concerns about environmental issues and the decline of petroleum-based resources, the synthesis of new biobased compounds for the polymer industry has become a prominent and timely topic. P-menthane-1,8-diamine (PMDA) is a readily available compound synthesized from turpentine, a cheap mixture of natural compounds isolated from pine trees. PMDA has been extensively used for its biological activities, but it can also serve as a source of valuable monomers for the polymer industry. In this work, commercial PMDA (ca. 85% pure) was purified by salinization, crystallization, and alkali treatment and then converted into p-menthane-1,8-diisocyanate (PMDI) through a phosgene-free synthesis at room temperature. A thorough analytical study using NMR techniques (1H, 13C, 13C-1H HSQC, 13C-1H HMBC, and 1H-1H NOESY) enables the characterization of the cis-trans isomeric mixtures of both PMDA and PMDI. These structural studies allowed for a better understanding of the spatial configuration of both isomers. Then, the reactivity of PMDI with a primary alcohol (benzyl alcohol) was studied in the presence of nine different catalysts exhibiting different activation modes. Finally, the use of PMDI in the synthesis of polyurethanes was explored to demonstrate that PMDI can be employed as a new biobased alternative to petrochemical-based isocyanates such as isophorone diisocyanate (IPDI).

The year 2023 is particularly remarkable because we are celebrating the 25th anniversary of the 12 principles of Green Chemistry described in the groundbreaking book Green Chemistry: Theory and Practice co-authored by Paul Anastas and John C [...]

A biobased latex was obtained by copolymerization in emulsion of ethoxy dihydroeugenyl methacrylate (EDMA) and coumarin methacrylate (CMA). Thin films of poly(EDMA-co-CMA) were irradiated with UV light at 365 nm, to promote the [2+2] photocycloaddition reaction of the coumarin moieties. The advancement of the reaction was followed by monitoring the intensity of the UV-Vis absorbance at 320 nm, characteristic of coumarin, after different irradiation times. Complete dimerization of the coumarin moieties could be achieved. A microfibrillated cellulose (MFC) reinforcement was added to the poly(EDMA-co-CMA) latexes to prepare composite materials. The permeability of the composite films to oxygen, before and after crosslinking, was assessed. For the non-crosslinked films, increasing the cellulose content from 5 wt% to 30 wt% decreased the oxygen transmission rate (OTR) by approximately 70%. When 1 wt% CMA moieties were present in the polymer backbone the OTR was approximately 50 % lower with respect to poly(EDMA) composites. A further slight decrease of permeability was observed upon crosslinking of the composite poly(EDMA-co-CMA)/MFC films.

1,3-dihydroxyacetone (DHA) is an underrated bio-based synthon, with a broad range of reactivities. It is produced for the revalorization of glycerol, a major side-product of the growing biodiesel industry. The overwhelming majority of DHA produced worldwide is intended for application as a self-tanning agent in cosmetic formulations. This review provides an overview of the discovery, physical and chemical properties of DHA, and of its industrial production routes from glycerol. Microbial fermentation is the only industrial-scaled route but advances in electrooxidation and aerobic oxidation are also reported. This review focuses on the plurality of reactivities of DHA to help chemists interested in bio-based building blocks see the potential of DHA for this application. The handling of DHA is delicate as it can undergo dimerization as well as isomerization reactions in aqueous solutions at room temperature. DHA can also be involved in further side-reactions, yielding original side-products, as well as compounds of interest. If this peculiar reactivity was harnessed, DHA could help address current sustainability challenges encountered in the synthesis of speciality polymers, ranging from biocompatible polymers to innovative polymers with cutting-edge properties and improved biodegradability.

This article focuses on the synthesis of polyhydroxyurethane (PHU) materials containing novel phosphorus flame retardants (FR). Four different phosphorus compounds were grafted onto cyclic carbonate: 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), diethyl phosphite (DEP), diphenyl phosphite (DPP) and dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO). Thus, three novel phosphorus reactive cyclic carbonates which have never been reported so far were synthetized. Phosphorus FR containing PHU materials were characterized by FTIR to evidence the total conversion of the cyclic carbonate. Moreover, the gel contents up to 80% confirmed the formation of the polymer network. Then, the thermal stability and the flame-retardant properties were investigated by thermogravimetric analyses, cone calorimeter and pyrolysis combustion flow calorimeter. The mode of action of phosphorus compounds, depending on the oxidation state, was especially highlighted. Phosphonate (+III) provided better action in a condensed phase than phosphinate thanks to a more efficient char formation. Among phosphonates, differences were observed in terms of char-formation rate and expansion. DEP provided the best flame-retardant properties, with a reduction of 76% of pHRR with 2 wt% of phosphorus in cone calorimeter analysis. Therefore, this article highlighted the different modes of action of phosphorus flame retardants, depending on the oxidation state of phosphorus, in PHU materials.

Methane's contribution to radiative forcing is second only to that of CO2. Though previously neglected, methane is now gaining increasing public attention as a GHG. At the recent COP26 in Glasgow, 105 countries signed “the methane pledge” committing to a 30% reduction in emissions from oil and gas by 2030 compared to 2020 levels. Removal methods are complementary to such reduction, as they can deal with other sources of anthropogenic emissions as well as legacy emissions already accumulated in the troposphere. They can also provide future insurance in case biogenic emissions start rising significantly. This article reviews proposed methods for atmospheric methane removal at a climatically significant scale. These methods include enhancement of natural hydroxyl and chlorine sinks, photocatalysis in solar updraft towers, zeolite catalyst in direct air capture devices, and methanotrophic bacteria. Though these are still at an early stage of development, a comparison is provided with some carbon dioxide removal methods in terms of expected costs. The cheapest method is potentially enhancement of the chlorine natural sink, costing as little as $1.6 per ton CO2-eq, but this should be carried out over remote areas to avoid endangering human health. Complementarity with methane emissions reduction is also discussed.

While the Michael addition has been employed for more than 130 years for the synthesis of a vast diversity of compounds, the reversibility of this reaction when heteronucleophiles are involved has been generally less considered. First applied to medicinal chemistry, the reversible character of the hetero-Michael reactions has recently been explored for the synthesis of Covalent Adaptable Networks (CANs), in particular the thia-Michael reaction and more recently the aza-Michael reaction. In these cross-linked networks, exchange reactions take place between two Michael adducts by successive dissociation and association steps. In order to understand and precisely control the exchange in these CANs, it is necessary to get an insight into the critical parameters influencing the Michael addition and the dissociation rates of Michael adducts by reconsidering previous studies on these matters. This review presents the progress in the understanding of the thia-Michael reaction over the years as well as the latest developments and plausible future directions to prepare CANs based on this reaction. The potential of aza-Michael reaction for CANs application is highlighted in a specific section with comparison with thia-Michael-based CANs.

Novel phosphorylated cardanol molecules based on phosphonate (PO3CR) and phosphate (PO4CR) functions were synthetized. Those molecules have two main actions which are described in this article: the reduction in volatile organic compounds (VOC) and the development of flame retardant (FR) properties conferred on alkyd resins used as coatings for wood specimen. Phosphorylated cardanol compounds have been successfully grafted by covalent bonds to alkyd resins thanks to an auto-oxidative reaction. The impact of the introduction of PO3CR and PO4CR on the film properties such as drying time and flexibility has been studied and the thermal and flame retardant properties through differential scanning calorimeter, thermogravimetric analysis and pyrolysis-combustion flow calorimeter. These studies underscored an increase in the thermal stability and FR properties of the alkyd resins. In the cone calorimeter test, the lowest pHRR was obtained with 3 wt% P of phosphate-cardanol and exhibited a value of 170 KW.m−2, which represented a decrease of almost 46% compared to the POxCR-free alkyd resins. Moreover, a difference in the mode of action between phosphonate and phosphate compounds has been highlighted. The most effective coating which combined excellent FR properties and good coating properties has been obtained with 2 wt% P of phosphate-cardanol. Indeed, the film properties were closed to the POxCR-free alkyd resin and the pHRR decreased by 41% compared to the reference alkyd resin.

Surfactants are crystallizing a certain focus for consumer interest, and their market is still expected to grow by 4 to 5% each year. Most of the time these surfactants are of petroleum origin and are not often biodegradable. Cashew Nut Shell Liquid (CNSL) is a promising non-edible renewable resource, directly extracted from the shell of the cashew nut. The interesting structure of CNSL and its components (cardanol, anacardic acid and cardol) lead to the synthesis of biobased surfactants. Indeed, non-ionic, anionic, cationic and zwitterionic surfactants based on CNSL have been reported in the literature. Even now, CNSL is absent or barely mentioned in specialized review or chapters talking about synthetic biobased surfactants. Thus, this review focuses on CNSL as a building block for the synthesis of surfactants. In the first part, it describes and criticizes the synthesis of molecules and in the second part, it compares the efficiency and the properties (CMC, surface tension, kraft temperature, biodegradability) of the obtained products with each other and with commercial ones.

Biobased monomers and green processes are key to producing sustainable materials. Cardanol, an aromatic compound obtained from cashew nut shells, may be conveniently functionalized, e.g., with epoxy or (meth)acrylate groups, to replace petroleum-based monomers. Photoinduced polymerization is recognized as a sustainable process, less energy intensive than thermal curing; however, cardanol-based UV-cured polymers have relatively low thermomechanical properties, making them mostly suitable as reactive diluents or in non-structural applications such as coatings. It is therefore convenient to combine them with biobased reinforcements, such as microfibrillated cellulose (MFC), to obtain composites with good mechanical properties. In this work a cardanol-based methacrylate monomer was photopolymerized in the presence of MFC to yield self-standing, flexible, and relatively transparent films with high thermal stability. The polymerization process was completed within few minutes even in the presence of filler, and the cellulosic filler was not affected by the photopolymerization process.

High oleic sunflower oil-based polyol was obtained by thiol-ene coupling and applied in the preparation of flexible polyurethane foams. The photochemically initiated thiol-ene click reaction was carried out under UV irradiation using 2-mercaptoethanol. Bio-based polyol with hydroxyl value of 201.4 mg KOH/g was used as 30 wt% substituent of petrochemical polyether polyol in the formulations of flexible foams. Both reference foams, as well as foams modified with bio-based polyol, were formulated to have various isocyanate indices (0.85, 0.95, 1.05). Flexible foams were compared in terms of their thermomechanical properties and analyzed using FT-IR and SEM microscopy. Modification with bio-based polyol resulted in foams with superior compression properties, higher support factor, and lower resilience than reference foams. TGA and FT-IR curves confirmed the presence of urethane/urea and ether linkages in the polyurethane matrix. Moreover, double glass transition temperature corresponding to soft and hard segments of polyurethane was observed by DSC proving the phase-separated morphology.

The trend towards the utilization of bioresources for the manufacturing of polymers has led industry players to bring to the market new monomers. In this work, we studied 3 polyisocyanates and 2 polyols with high renewable carbon contents, namely L-lysine ethyl ester diisocyanate (LDI), pentamethylene-diisocyanate (PDI) isocyanurate trimer, and hexamethylene-diisocyanate (HDI) allophanate as the isocyanates, as well as castor oil and polypropanediol as the polyols. These monomers are commercially available at a large scale and were used in direct formulations or used as prepolymers. Thermosetting polymers with Tg values ranging from −41 to +21 °C and thermal stabilities of up to 300 °C were obtained, and the polymerization was studied using NMR, DSC, and rheology. Cured materials were also characterized using FTIR, DMA, gel content, and swelling index determinations. These high bio-based content materials can successfully be obtained and could be used as alternatives to petro-based materials.

BioPolymers could be either natural polymers (polymer naturally occurring in Nature, such as cellulose or starch…), or biobased polymers that are artificially synthesized from natural resources [...]

Biobased monomers have been used to replace their petroleum counterparts in the synthesis of polymers that are aimed at different applications. However, environmentally friendly polymerization processes are also essential to guarantee greener materials. Thus, photoinduced polymerization, which is low-energy consuming and solvent-free, rises as a suitable option. In this work, eugenol-, isoeugenol-, and dihydroeugenol-derived methacrylates are employed in radical photopolymerization to produce biobased polymers. The polymerization is monitored in the absence and presence of a photoinitiator and under air or protected from air, using Real-Time Fourier Transform Infrared Spectroscopy. The polymerization rate of the methacrylate double bonds was affected by the presence and reactivity of the allyl and propenyl groups in the eugenol- and isoeugenol-derived methacrylates, respectively. These groups are involved in radical addition, degradative chain transfer, and termination reactions, yielding crosslinked polymers. The materials, in the form of films, are characterized by differential scanning calorimetry, thermogravimetric, and contact angle analyses.

In recent years, polymer chemistry has experienced an intensive development of a new field regarding the synthesis of aliphatic and aromatic biobased monomers obtained from renewable plant sources. A one-step process for the synthesis of new vinyl monomers by the reaction of direct transesterification of plant oil triglycerides with N-(hydroxyethyl)acrylamide has been recently invented to yield plant oil-based monomers (POBMs). The features of the POBM chemical structure, containing both a polar (hydrophilic) fragment capable of electrostatic interactions, and hydrophobic acyl fatty acid moieties (C15-C17) capable of van der Waals interactions, ensures the participation of the POBMs fragments of polymers in intermolecular interactions before and during polymerization. The use of the POBMs with different unsaturations in copolymerization reactions with conventional vinyl monomers allows for obtaining copolymers with enhanced hydrophobicity, provides a mechanism of internal plasticization and control of crosslinking degree. Synthesized latexes and latex polymers are promising candidates for the formation of hydrophobic polymer coatings with controlled physical and mechanical properties through the targeted control of the content of different POBM units with different degrees of unsaturation in the latex polymers.

Most of the current amine hardeners are petro-sourced and only a few studies have focused on the research of bio-based substitutes. Hence, in an eco-friendly context, our team proposed the design of bio-based amine monomers with aromatic structures. This work described the use of the reductive amination with imine intermediate in order to obtain bio-based pluri-functional amines exhibiting low viscosity. The effect of the nature of initial aldehyde reactant on the hardener properties was studied, as well as the reaction conditions. Then, these pluri-functional amines were added to petro-sourced (diglycidyl ether of bisphenol A, DGEBA) or bio-based (diglycidyl ether of vanillin alcohol, DGEVA) epoxy monomers to form thermosets by step growth polymerization. Due to their low viscosity, the epoxy-amine mixtures were easily homogenized and cured more rapidly compared to the use of more viscous hardeners (Tg and Tα) were around 95 °C for DGEBA-based thermosets against 60 °C for DGEVA-based thermosets) than materials from benzylamine (BDA) or furfurylamine (FDA) that contained less active hydrogens (Tg and Tα around 77 °C for DGEBA-based thermosets and Tg and Tα around 45 °C for DGEVA-based thermosets). By comparing to industrial hardener references, IPTA possesses six active hydrogens which obtain high cross-linked systems, similar to industrial references, and longer molecular length due to the presence of two alkyl chains, leading respectively to high mechanical strength with lower Tg.

Epoxy materials have attracted attention for many applications that require fireproof performance; however, the utilization of hazardous reagents brings about potential damage to human health. Eugenol and cardanol are renewable, harmless resources (according to ECHA) that allow the achievement of synthesis of novel phosphorylated epoxy monomers to be used as reactive flame retardants. These epoxy building blocks are characterized by 1H NMR and 31P NMR (nuclear magnetic resonance) and reacted with a benzylic diamine to give bio-based flame-retardant thermosets. Compared to DGEBA (Bisphenol A Diglycidyl Ether)-based material, these biobased thermosets differ by their cross-linking ratio, the nature of the phosphorylated function and the presence of an aliphatic chain. Eugenol has led to thermosets with higher glass transition temperatures due to a higher aromatic density. The flame-retardant properties were tested by thermogravimetric analyses (TGA), a pyrolysis combustion flow calorimeter (PCFC) and a cone calorimeter. These analyses demonstrated the efficiency of phosphorus by reducing significantly the peak heat release rate (pHRR), the total heat release (THR) and the effective heat of combustion (EHC). Moreover, the cone calorimeter test exhibited an intumescent phenomenon with the residues of phosphorylated eugenol thermosets. Lastly, the higher flame inhibition potential was highlighted for the phosphonate thermoset.

The development of epoxy thermosets from renewable resources is of paramount importance in a sustainable development context. In this paper, a novel bio-based epoxy monomer derived from limonene was synthesized without epichlorohydrine and characterized. In fact, this paper depicts the synthesis of bis-limonene oxide (bis-LO). However, intern epoxy rings generally exhibit a poor reactivity and allow reaction with anhydride. Therefore, we used a reaction model with hexahydro-4-methylphthalic anhydride to compare reactivity of terminal and interepoxy functions. We also studied the influence of methyl group on intern epoxy functions. Furthermore, the influence of epoxy:anhydride stoichiometry and initiator amount was studied. These studies allow to propose an optimized formulation of bis-LO. Finally, a bis-LO-based thermoset was obtained and characterized.

The synthesis of polymers from renewable resources is a burning issue that is actively investigated. Polyepoxide networks constitute a major class of thermosetting polymers and are extensively used as coatings, electronic materials, adhesives. Owing to their outstanding mechanical and electrical properties, chemical resistance, adhesion, and minimal shrinkage after curing, they are used in structural applications as well. Most of these thermosets are industrially manufactured from bisphenol A (BPA), a substance that was initially synthesized as a chemical estrogen. The awareness on BPA toxicity combined with the limited availability and volatile cost of fossil resources and the non-recyclability of thermosets implies necessary changes in the field of epoxy networks. Thus, substitution of BPA has witnessed an increasing number of studies both from the academic and industrial sides. This review proposes to give an overview of the reported aromatic multifunctional epoxide building blocks synthesized from biomass or from molecules that could be obtained from transformed biomass. After a reminder of the main glycidylation routes and mechanisms and the recent knowledge on BPA toxicity and legal issues, this review will provide a brief description of the main natural sources of aromatic molecules. The different epoxy prepolymers will then be organized from simple, mono-aromatic di-epoxy, to mono-aromatic poly-epoxy, to di-aromatic di-epoxy compounds, and finally to derivatives possessing numerous aromatic rings and epoxy groups.