Search

Abstract The continuously reinforced concrete pavement (CRCP) system grapples with challenges such as non-uniform transverse crack patterns and the need for substantial reinforcement. Field research on the Belgian CRCP sections along motorway E313 indicates that active cracking induced by partial surface saw-cuts consistently leads to transverse crack patterns. This study introduces an innovative modification to the CRCP: the actively reinforced concrete pavement design (ARCP). The ARCP leverages partial surface saw-cuts to reduce reinforcement needs by replacing continuous-length steel bars with partial-length counterparts. The main objective of the present study is to develop a 3D finite element (FE) model capturing the active cracking behavior of ARCP under realistic external temperature variations. Comparative analysis with CRCP considers early-age crack patterns, crack strain development, and the distribution of maximum steel stress for different steel ratios (0.67%, 0.75%, and 0.85%). FE simulation results align with field data, indicating that ARCP exhibits similar early-age cracking behavior to CRCP but with a significant 24 to 42% reduction in total reinforcement. This innovation presents a promising avenue for addressing CRCP challenges while optimizing material usage in pavement construction.

Abstract Within concrete engineering, the uptake of self-compacting concrete (SCC) represents a notable trend, delivering improved workability and placement efficiency. However, challenges persist, notably in achieving optimal performance while mitigating environmental impacts, particularly in cement consumption. However, simply reducing the cement content in the mix design can directly compromise the structural-concrete requirements. Towards these challenges, global trends emphasize the utilization of appropriate waste materials in blended concrete. This study explored a promising strategy by integrating supplementary cementitious materials (SCMs) to contribute to the United Nations' Sustainable Development Goals (SDGs) in addition to the engineering contributions. It suggests an optimal combination of Metakaolin (MK) and Limestone Powder (LP) to partially substitute cement. The research methodology employs the response surface method (RSM) to systematically explore the ideal ingredient ratios. Through a comprehensive analysis of orthogonal array of 16 mixes, encompassing both mixture and process variables, this study aims to explain the effects of MK and LP addition on the rheological and mechanical properties of SCC with varying cement replacement levels. In terms of mixture constituents, the total composition of cement, MK, and LP was fixed at 100%, while coarse aggregate (CA), fine aggregate (FA), and the water-to-binder ratio were held as process variables. In order to assess the rheological properties of the mix-design, various tests including slump flow, L-box, and sieve segregation were conducted. Additionally, to evaluate mechanical strength, samples were tested for compressive strength at both 7 and 28 days. Findings from the experiments reveal higher concentrations of MK result in reduced workability and hardened properties. Through RSM-based designed experimentation covering both rheological and mechanical aspects, it is observed that the optimal cement replacement level lies between 40 and 55%. The findings of this study contribute to the advancement of sustainable and structurally robust concrete practices, offering insights into the optimal utilization of SCMs to meet both engineering requirements and environmental sustainability goals.

Rising populations and industrial expansion necessitate sustainable alternatives to conventional cement-based concrete. Geopolymers, with their impressive mechanical properties, eco-friendliness, and potential for waste utilization, offer a promising solution. Yet, concerns like rapid setting and low workability limit their widespread adoption. This study addresses these challenges by optimizing a geopolymer concrete incorporating ground granulated blast furnace slag (GGBS) blended with bentonite and dolomite minerals. Employing the Taguchi method, we optimized the mix design considering key factors like binder content, mineral replacements, alkaline-to-binder ratio, and solution ratios. Grey-Relational Analysis identified the optimal mix with 10 % bentonite and dolomite replacement, a 0.55 alkaline-to-binder ratio, 12 M NaOH solution, and 425 kg/m3 cementing materials. This optimized mix exhibited significantly improved setting times, enhanced workability, and the highest compressive strength among all tested mixtures. Experimental validation confirms its effectiveness, highlighting its potential as a sustainable alternative. Importantly, this research explores GGBS as a replacement for commonly used Fly Ash, further advancing sustainable construction practices.