Search

Non-conventional yeasts are increasingly being investigated and used as producers in biotechnological processes which often offer advantages in comparison to traditional and well-established systems. Most biotechnologically interesting non-conventional yeasts belong to the Saccharomycotina subphylum, including those already in use ( Pichia pastoris, Yarrowia lypolitica , etc.), as well as those that are promising but as yet insufficiently characterized. Moreover, for many of these yeasts the basic tools of genetic engineering needed for strain construction, including a procedure for efficient genetic transformation, heterologous protein expression and precise genetic modification, are lacking. The first aim of this study was to construct a set of integrative and replicative plasmids which can be used in various yeasts across the Saccharomycotina subphylum. Additionally, we demonstrate here that the electroporation procedure we developed earlier for transformation of B. bruxellensis can be applied in various yeasts which, together with the constructed plasmids, makes a solid starting point when approaching a transformation of yeasts form the Saccharomycotina subphylum. To provide a proof of principle, we successfully transformed three species from the Schwanniomyces genus ( S. polymorphus var. polymorphus , S. polymorphus var. africanus and S. pseudopolymorphus ) with high efficiencies (up to 8 × 10 3 in case of illegitimate integration of non-homologous linear DNA and up to 4.7 × 10 5 in case of replicative plasmid). For the latter two species this is the first reported genetic transformation. Moreover, we found that a plasmid carrying replication origin from Scheffersomyces stipitis can be used as a replicative plasmid for these three Schwanniomyces species.

Conventional diffused aeration systems (such as fine-bubble diffusers) exhibit a poor oxygen transfer in wastewater treatment plants (WWTPs), particularly when operating at sludge concentrations higher than 15 g L -1 . The supersaturated dissolved oxygen (SDOX) system has been proposed as an alternative for supplying dissolved oxygen (DO) at high mixed liquor suspended solids (MLSS) concentrations. The advantages introduced by such technology include the possibility of operating WWTPs at much higher than usual MLSS concentrations, increasing the treatment capacity of WWTPs. Recent studies have demonstrated that the SDOX system has higher oxygen transfer rates (OTRs) and oxygen transfer efficiencies (OTEs) relative to fine-bubble diffusers. However, it is unknown if the high-pressure conditions introduced by SDOX may possibly impact the biological performance of WWTPs. In this study, the effects of SDOX technology on the biological performance of a membrane bioreactor (MBR) were evaluated. The MBR was operated at an MLSS concentration of approximately 15 g L -1 in four phases as follows: (P1) with bubble diffusers, (P2) with an SDOX unit, (P3) with the bubble diffusers, and (P4) with the SDOX unit. The performance of the MBR was assessed by monitoring the sludge concentration, as well as changes in the particle size distribution (PSD), sludge activity, organic matter removal and nitrification performance, and changes in the microbial community within the MBR. The operational conditions exerted by the SDOX technology did not affect the concentration of active biomass during the study period. The biological performance of the MBR was not affected by the introduction of the SDOX technology. Finally, the microbial community was relatively stable although some variations at the family and genus level were evident during each of the study phases. Therefore, the SDOX system can be proposed as an alternative technology for DO supply in WWTPs increasing the overall treatment capacity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A palindrome in DNA consists of two closely spaced or adjacent inverted repeats. Certain palindromes have important biological functions as parts of various cis-acting elements and protein binding sites. However, many palindromes are known as fragile sites in the genome, sites prone to chromosome breakage which can lead to various genetic rearrangements or even cell death. The ability of certain palindromes to initiate genetic recombination lies in their ability to form secondary structures in DNA which can cause replication stalling and double-strand breaks. Given their recombinogenic nature, it is not surprising that palindromes in the human genome are involved in genetic rearrangements in cancer cells as well as other known recurrent translocations and deletions associated with certain syndromes in humans. Here, we bring an overview of current understanding and knowledge on molecular mechanisms of palindrome recombinogenicity and discuss possible implications of DNA palindromes in carcinogenesis. Furthermore, we overview the data on known palindromic sequences in the human genome and efforts to estimate their number and distribution, as well as underlying mechanisms of genetic rearrangements specific palindromic sequences cause.

Cells grown on bioactive matrices have immensely advanced many aspects of biomedical research related to drug delivery and tissue engineering. Our main objective was to perform simple evaluation of the structural and biotic qualities of cell scaffolds made of affordable biomaterials for liver cell line (HepG2) cultivation in vitro. In this work the electrospun matrix made of synthetic polyester poly(ε-caprolactone) (PCL) was compared with the natural protein-based extracellular matrix isolated from porcine liver (ECM). Mechanical and structural analysis showed that ECM was about 12 times less resistant to tensile stress while it had significantly larger pore size and twice smaller water contact angle than PCL. Bioactivity assessment included comparison of cell growth and transfection efficiency on cell-seeded scaffolds. Despite the differences in composition and structure between the two respective matrices, the rate of cell spreading and the percentage of transfected cells on both scaffolds were fairly comparable. These results suggest that in an attempt to produce simple, cell carrying structures that adequately simulate the natural scaffold, one can rely on PCL electrospun mats.

High-quality environmentally-friendly bioplastics can be produced by mixing poly-L-lactate with poly-D-lactate. On an industrial scale, this process simultaneously consumes large amounts of both optically pure lactate stereoisomers. However, because optimal growth conditions of L-lactate producers often differ from those of D-lactate producers, each stereoisomer is produced in a specialised facility, which raises cost and lowers sustainability. To address this challenge, we metabolically engineered Lactobacillus gasseri JCM 1131 T , a bioprocess-friendly and genetically malleable strain of homofermentative lactic acid bacterium, to efficiently produce either pure L- or pure D-lactate under the same bioprocess conditions. Transformation of L. gasseri with plasmids carrying additional genes for L- or D-lactate dehydrogenases failed to affect the ratio of produced stereoisomers, but inactivation of the endogenous genes created strains which yielded 0.96 g of either L- or D-lactate per gram of glucose. In this study, the plasmid pHBintE, routinely used for gene disruption in Bacillus megaterium, was used for the first time to inactivate genes in lactobacilli. Strains with inactivated genes for endogenous lactate dehydrogenases efficiently fermented sugars released by enzymatic hydrolysis of alkali pre-treated wheat straw, an abundant lignocellulose-containing raw material, producing 0.37-0.42 g of lactate per gram of solid part of alkali-treated wheat straw. Thus, the constructed strains are primed to serve as producers of both optically pure L-lactate and D-lactate in the next-generation biorefineries.

Palindromic sequences in DNA can instigate genetic recombination and genome instability, which can result in devastating conditions such as the Emmanuel syndrome. Palindrome recombinogenicity increases with its size and sequence similarity between palindrome arms, while quasipalindromes with long spacers are less recombinogenic. However, the minimal spacer length, which could reduce or abolish palindrome recombinogenicity in the eukaryotic genome, was never determined. Therefore, we constructed a series of palindromes containing spacers of lengths ranging from 0 (perfect palindrome) to 10 bp and tested their recombinogenicity in yeast Saccharomyces cerevisiae. We found that a 7 bp spacer significantly reduces 126 bp palindrome recombinogenicity, while a 10 bp spacer completely stabilizes palindromes up to 150 bp long. Additionally, we showed that palindrome stimulated recombination rate is not dependent on Mus81 and Yen1 endonucleases. We also compared the recombinogenicity of a perfect 126 bp palindrome and a corresponding quasipalindrome consisting of the same palindrome arms with a stabilising 10 bp spacer in sgs1Δ and rad27Δ backgrounds, since both Sgs1 helicase and Rad27 endonuclease are implicated in preventing hairpin formation at palindromic sequences during replication., Competing Interests: Declaration of Competing Interest The authors declare that there are no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Bioethanol production from lignocellulosic hydrolysates requires a producer strain that tolerates both the presence of growth and fermentation inhibitors and high ethanol concentrations. Therefore, we constructed heterozygous intraspecies hybrid diploids of Saccharomyces cerevisiae by crossing two natural S. cerevisiae isolates, YIIc17_E5 and UWOPS87-2421, a good ethanol producer found in wine and a strain from the flower of the cactus Opuntia megacantha resistant to inhibitors found in lignocellulosic hydrolysates, respectively. Hybrids grew faster than parental strains in the absence and in the presence of acetic and levulinic acids and 2-furaldehyde, inhibitors frequently found in lignocellulosic hydrolysates, and the overexpression of YAP1 gene increased their survival. Furthermore, although originating from the same parental strains, hybrids displayed different fermentative potential in a CO 2 production test, suggesting genetic variability that could be used for further selection of desirable traits. Therefore, our results suggest that the construction of intraspecies hybrids coupled with the use of genetic engineering techniques is a promising approach for improvement or development of new biotechnologically relevant strains of S. cerevisiae. Moreover, it was found that the success of gene targeting (gene targeting fidelity) in natural S. cerevisiae isolates (YIIc17_E5α and UWOPS87-2421α) was strikingly lower than in laboratory strains and the most frequent off-targeting event was targeted chromosome duplication.

Gene replacement is one of the most essential approaches in construction of the genetically modified yeast strains. However, the fidelity of gene targeting and the effort needed for construction of a particular strain can vary significantly. We investigated the influence of two important factors-the choice of the transformation method and the design of the transforming DNA fragment, which can vary in overall length (including flanking regions and selectable marker) compared to the length of the targeted region in the genome. Gene replacement fidelity was determined in several assays using electroporation and spheroplast transformation, and compared with our previous results obtained by lithium acetate. We have demonstrated clearly that gene targeting fidelity depends on the transformation protocol, being highest for lithium acetate method. In contrast, lower fidelity was observed with electroporation and spheroplast transformation. Additionally, the fidelity also depends on a design of the transformation assay, since a higher overall length ratio of the transforming DNA and targeted region results in higher fidelity. Moreover, the karyotype analysis of the aberrant transformants by qPCR demonstrates that gene targeting can result in diploidisation of haploid strains, most likely via targeted chromosome duplication followed by subsequent duplication of other chromosomes., (© FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Yeast Dekkera/Brettanomyces bruxellensis is one of the most common contaminants in wine industry, but also one of the most promising candidates for large-scale bioethanol production. Brettanomyces bruxellensis not only produces and tolerates high ethanol concentrations, but can also ferment cellobiose and adapt to lignocellulose hydrolasate. Furthermore, genome sequences of several B. bruxellensis strains are available, and efforts have been made to develop tools for genetic transformation of this yeast. Previously, we reported a successful transformation using lithium acetate/PEG method and electroporation, however, with very low transformation efficiency (10-20 transformants μg(-1)). Here we describe an optimization of electroporation procedure which resulted in a significant increase of transformation efficiency (2.8 × 10(3) transformants μg(-1)). Several key transformation parameters were optimized including cell growth phase, density of cells in the transformation sample and electroporation settings. We determined that treating the cells with both lithium acetate (100 mM) and dithiothreitol (35 mM) synergistically improves transformation efficiency. Using the described procedure around 500 transformants can be obtained per transformation sample with 180 ng of non-homologous linear transforming fragment. Additionally, several transformants were obtained with less than 1 ng of DNA demonstrating that this procedure is adequate even when very limited amount of DNA is available., (© FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Gene targeting is extremely efficient in the yeast Saccharomyces cerevisiae. It is performed by transformation with a linear, non-replicative DNA fragment carrying a selectable marker and containing ends homologous to the particular locus in a genome. However, even in S. cerevisiae, transformation can result in unwanted (aberrant) integration events, the frequency and spectra of which are quite different for ends-out and ends-in transformation assays. It has been observed that gene replacement (ends-out gene targeting) can result in illegitimate integration, integration of the transforming DNA fragment next to the target sequence and duplication of a targeted chromosome. By contrast, plasmid integration (ends-in gene targeting) is often associated with multiple targeted integration events but illegitimate integration is extremely rare and a targeted chromosome duplication has not been reported. Here we systematically investigated the influence of design of the ends-out assay on the success of targeted genetic modification. We have determined transformation efficiency, fidelity of gene targeting and spectra of all aberrant events in several ends-out gene targeting assays designed to insert, delete or replace a particular sequence in the targeted region of the yeast genome. Furthermore, we have demonstrated for the first time that targeted chromosome duplications occur even during ends-in gene targeting. Most importantly, the whole chromosome duplication is POL32 dependent pointing to break-induced replication (BIR) as the underlying mechanism. Moreover, the occurrence of duplication of the targeted chromosome was strikingly increased in the exo1Δ sgs1Δ double mutant but not in the respective single mutants demonstrating that the Exo1 and Sgs1 proteins independently suppress whole chromosome duplication during gene targeting., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Yeast Dekkera/Brettanomyces bruxellensis is probably the most common contaminant in wineries and ethanol production processes. The considerable economic losses caused by this yeast, but also its ability to produce and tolerate high ethanol concentrations, make it an attractive subject for research with potential for industrial applications. Unfortunately, efforts to understand the biology of D. bruxellensis and facilitate its broader use in industry are hampered by the lack of adequate procedures for delivery of exogenous DNA into this organism. Here we describe the development of transformation protocols (spheroplast transformation, LiAc/PEG method, and electroporation) and report the first genetic transformation of yeast D. bruxellensis. A linear heterologous DNA fragment carrying the kanMX4 sequence was used for transformation, which allowed transformants to be selected on plates containing geneticin. We found the spheroplast transformation method using 1M sorbitol as osmotic stabilizer to be inappropriate because sorbitol strikingly decreases the plating efficiency of both D. bruxellensis spheroplast and intact cells. However, we managed to modify the LiAc/ PEG transformation method and electroporation to accommodate D. bruxellensis transformation, achieving efficiencies of 0.6-16 and 10-20 transformants/microg DNA, respectively. The stability of the transformants ranged from 93.6% to 100%. All putative transformants were analyzed by Southern blot using the kanMX4 sequence as a hybridization probe, which confirmed that the transforming DNA fragment had integrated into the genome. The results of the molecular analysis were consistent with the expected illegitimate integration of a heterologous transforming fragment.

The microbial population of a traditional Croatian fermented sausage "Slavonski kulen" was isolated, identified and subjected to technological and functional characterization in order to select potential autochthonous functional starter cultures. Dominant microflora were lactic acid bacteria (LAB), followed by staphylococci. Identification of isolated lactobacilli showed domination of Leuconostoc mesenteroides and Lactobacillus acidophilus while Staphylococcus xylosus and Staphylococcus warneri outnumbered the staphylococcal microbiota. Most of the isolated LAB and Staphylococcus species displayed good growth in the presence of 5% of NaCl and at 12, 18 and 22°C. All LAB and most of the staphylococci possess proteolytic activity and only Staphylococcus xylosus had lipolytic activity. All lactobacilli and staphylococci isolates produced significant concentrations of lactic acid (as determined by HPLC) and showed antimicrobial activity against pathogenic test microorganisms. Dominant LAB and Staphylococcus species displayed growth in the presence of 1% bile. Most of the staphylococci and all of lactobacilli showed sensitivity to all antibiotics tested., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

In recent years, an evident rise in the frequency of candidaemia caused by non-albicans Candida species has been reported. In this paper we present three cases of clinically manifested candidaemia caused by Candida utilis in neonatal patients hospitalized in the same neonatal intensive care unit within a 6 month period. To the authors' knowledge, only two cases of C. utilis candidaemia have been reported in the literature to date, but neither of these involved newborns. Clinical resolution and elimination of C. utilis from the blood were achieved using liposomal amphotericin B or caspofungin in all patients.

Palindromic and quasi-palindromic sequences are important DNA motifs found in various cis-acting genetic elements, but are also known to provoke different types of genetic alterations. The instability of such motifs is clearly size-related and depends on their potential to adopt secondary structures known as hairpins and cruciforms. Here we studied the influence of palindrome size on recombination between two directly repeated copies of the yeast CYC1 gene leading to the loss of the intervening sequence ("pop-out" recombination). We show that palindromes inserted either within one copy or between the two copies of the CYC1 gene become recombinogenic only when they attain a certain critical size and we estimate this critical size to be about 70 bp. With the longest palindrome used in this study (150 bp) we observed a more than 20-fold increase in the pop-out recombination. In the sae2/com1 mutant the palindrome-stimulated recombination was completely abolished. Suppression of palindrome recombinogenicity may be crucial for the maintenance of genetic stability in organisms containing a significant number of large palindromes in their genomes, like humans.

The synbiotic effect of the oral treatment of Swiss albino mice with milk-based diets supplemented with Lactobacillus helveticus M92 and various kinds of prebiotics was investigated. Survival, competition, adhesion and colonization, as well as, immunomodulating capability of Lb. helveticus M92, in synbiotic combination, in the gastrointestinal tract (GIT) of mice, were monitored. After the mice were fed with synbiotics, the lactic acid bacteria (LAB) counts in faeces were increased and reduction of enterobacteria and sulphite-reducing clostridia was observed. Similar results were obtained in homogenates of small and large intestine of mice on the 1st and 14th day, after feeding with synbiotics. After the mice were orally given viable Lb. helveticus M92 cells, alone or in combination with prebiotic, the concentration of faecal SIgA and total serum IgA antibodies from all immunized mice were higher compared with the control. The specific humoral immune response was not evoked after oral administration, therefore their synbiotic application is suitable. Among inulin, lactulose and raffinose, Lb. helveticus M92 in combination with inulin, has shown the best synbiotic effect on intestinal and faecal microflora and immune system of mice.

We investigated the influence of short terminal heterologies on recombination between transforming linear DNA fragments and the yeast Saccharomyces cerevisiae genome. The efficiency of plasmid integration to the CYC1 locus (ends-in assay) was decreased more than five-fold when the size of terminal heterology exceeded 28 nucleotides (nt) and a similar inhibitory effect was also observed in the ends-out assay (replacement of the ura3-52 allele by the URA3 gene). Plasmid integration occurred almost exclusively in the target homology and was accompanied by excessive degradation of the heterologous termini. Illegitimate integrations were much more frequent in the ends-out transformation in both the absence (8.9%) and the presence (23.7%) of 45/46 heterologous nucleotides at the ends of the transforming fragment. Interestingly, only about 60% of transformants arose by simple gene replacement, regardless of the presence of heterologous ends, whereas more complex interactions resulted in gene or whole chromosome duplications. Our results warn that different genetic alterations may be introduced in the host strain during ends-out transformation but also indicate possible mechanisms for formation of duplications in the genome., ((c) 2007 John Wiley & Sons, Ltd.)

Palindromic sequences are important DNA motifs involved in the regulation of different cellular processes, but are also a potential source of genetic instability. In order to initiate a systematic study of palindromes at the whole genome level, we developed a computer program that can identify, locate and count palindromes in a given sequence in a strictly defined way. All palindromes, defined as identical inverted repeats without spacer DNA, can be analyzed and sorted according to their size, frequency, GC content or alphabetically. This program was then used to prepare a catalog of all palindromes present in the chromosomal DNA of the yeast Saccharomyces cerevisiae. For each palindrome size, the observed palindrome counts were significantly different from those in the randomly generated equivalents of the yeast genome. However, while the short palindromes (2-12 bp) were under-represented, the palindromes longer than 12 bp were over-represented, AT-rich and preferentially located in the intergenic regions. The 44-bp palindrome found between the genes CDC53 and LYS21 on chromosome IV was the longest palindrome identified and contained only two C-G base pairs. Avoidance of coding regions was also observed for palindromes of 4-12 bp, but was less pronounced. Dinucleotide analysis indicated a strong bias against palindromic dinucleotides that could explain the observed short palindrome avoidance. We discuss some possible mechanisms that may influence the evolutionary dynamics of palindromic sequences in the yeast genome.

Aims: To investigate the functional role of surface layer proteins (S-layer) in probiotic strain Lactobacillus acidophilus M92, especially its influence on adhesiveness to mouse ileal epithelial cells., Methods and Results: Sodium dodecyl sulphate polyacrylamide gel electrophoresis of cell surface proteins revealed the presence of potential surface layer (S-layer) proteins, ca at 45 kDa in L. acidophilus M92. Southern blot with pBK1 plasmid, containing slpA gene, gave a positive signal, suggesting that L. acidophilus M92 has a slpA gene coding for the S-layer proteins. S-layer proteins of this strain are present during all phases of growth. The S-layer proteins appeared when cells treated with 5 mol l(-1) LiCl were allowed to grow again. Removal of the S-layer proteins reduced adhesion of L. acidophilus M92 to mouse ileal epithelial cells. Furthermore, the viability of cells without S-layer were reduced in simulated gastric juice at low pH range (2, 2.5, 3) and simulated pancreatic juice with bile salts (1.5 and 3 g l(-1)). S-layer proteins of L. acidophilus M92 were resistant to pepsin and pancreatin, in contrast, the treatment with proteinase K led to a significant proteolysis of the S-layer proteins., Conclusions: These results demonstrated functional role of S-layer; it is responsible for adhesiveness of Lactobacillus acidophilus M92 to mouse ileal epithelial cells and has a protective role for this strain., Significance and Impact of the Study: S-layer proteins have an important role in the establishment of probiotic strain Lactobacillus acidophilus M92 in the gastrointestinal tract.

We studied the influence of homology size and polymorphism on the integration of circular plasmids into the yeast CYC1 region. The plasmids used also contained the URA3 gene, and the proportion of Ura+ transformants resulting from plasmid integration into the CYC1 region was determined by Southern-blot analysis. A size-dependent decrease in integration into the CYC1 region was observed from 858 bp to 363 bp of homology. However, with a homology size of 321, 259 or 107 bp, about 2% of the transformants still contained plasmid molecules integrated in the CYC1 region. A single point mutation in the 858-bp fragment decreased the proportion of integrations to the CYC1 gene, but the presence of additional mutations did not have a cumulative effect. For plasmids isolated in a single-stranded (ss) form, the presence of two or six point mutations did not influence integration. These results were compared with those obtained in other assays designed to study substrate requirements for homologous recombination.