Search

Federated Learning (FL) enables multiple institutes to train models collaboratively without sharing private data. Current FL research focuses on communication efficiency, privacy protection, and personalization and assumes that the data of FL have already been ideally collected. In medical scenarios, however, data annotation demands both expertise and intensive labor, which is a critical problem in FL. Active learning (AL), has shown promising performance in reducing the number of data annotations in medical image analysis. We propose a federated AL (FedAL) framework in which AL is executed periodically and interactively under FL. We exploit a local model in each hospital and a global model acquired from FL to construct an ensemble. We use ensemble-entropy-based AL as an efficient data-annotation strategy in FL. Therefore, our FedAL framework can decrease the amount of annotated data and preserve patient privacy while maintaining the performance of FL. To our knowledge, this is the first FedAL framework applied to medical images. We validated our framework on real-world dermoscopic datasets. Using only 50% of samples, our framework was able to achieve state-of-the-art performance on a skin-lesion classification task. Our framework performed better than several state-of-the-art AL methods under FL and achieved comparable performance to full-data FL., Comment: 14 pages, 3 figures

Multi-modal fusion is crucial in medical data research, enabling a comprehensive understanding of diseases and improving diagnostic performance by combining diverse modalities. However, multi-modal fusion faces challenges, including capturing interactions between modalities, addressing missing modalities, handling erroneous modal information, and ensuring interpretability. Many existing researchers tend to design different solutions for these problems, often overlooking the commonalities among them. This paper proposes a novel multi-modal fusion framework that achieves adaptive adjustment over the weights of each modality by introducing the Modal-Domain Attention (MDA). It aims to facilitate the fusion of multi-modal information while allowing for the inclusion of missing modalities or intrinsic noise, thereby enhancing the representation of multi-modal data. We provide visualizations of accuracy changes and MDA weights by observing the process of modal fusion, offering a comprehensive analysis of its interpretability. Extensive experiments on various gastrointestinal disease benchmarks, the proposed MDA maintains high accuracy even in the presence of missing modalities and intrinsic noise. One thing worth mentioning is that the visualization of MDA is highly consistent with the conclusions of existing clinical studies on the dependence of different diseases on various modalities. Code and dataset will be made available.

Dropped Head Syndrome (DHS) causes a passively correctable neck deformation. Currently, there is no wearable orthopedic neck brace to fulfill the needs of persons suffering from DHS. Related works have made progress in this area by creating mobile neck braces that provide head support to mitigate deformation while permitting neck mobility, which enhances user-perceived comfort and quality of life. Specifically, passive designs show great potential for fully functional devices in the short term due to their inherent simplicity and compactness, although achieving suitable support presents some challenges. This work introduces a novel compliant mechanism that provides non-restrictive adjustable support for the neck's anterior and posterior flexion movements while enabling its unconstrained free rotation. The results from the experiments on non-affected persons suggest that the device provides the proposed adjustable support that unloads the muscle groups involved in supporting the head without overloading the antagonist muscle groups. Simultaneously, it was verified that the free rotation is achieved regardless of the stiffness configuration of the device., Comment: Accepted Manuscript

Wheelchairs and mobility devices have transformed our bodies into cybernic systems, extending our well-being by enabling individuals with reduced mobility to regain freedom. Notwithstanding, current interfaces of control require to use the hands, therefore constraining the user from performing functional activities of daily living. In this work, we present a unique design of torso-based control interface with compliant coupling support for standing mobility assistive devices. We take the coupling between the human and robot into consideration in the interface design. The design includes a compliant support mechanism and a mapping between the body movement space and the velocity space. We present experiments including multiple conditions, with a joystick for comparison with the proposed torso control interface. The results of a path-following experiment showed that users were able to control the device naturally using the hands-free interface, and the performance was comparable with the joystick, with 10% more consumed time, an average cross error of 0.116 m and 4.9% less average acceleration. The result of an object-transferring experiment showed the advantage of using the proposed interface in case users needed to manipulate objects while locomotion. The torso control scored 15% less in the System Usability Scale than the joystick in the path following task but 3.3% more in the object transferring task., Comment: Submitted to IEEE/ASME Transactions on Mechatronics

Nonsurgical treatment of Dropped Head Syndrome (DHS) incurs the use of collar-type orthoses that immobilize the neck and cause discomfort and sores under the chin. Articulated orthoses have the potential to support the head posture while allowing partial mobility of the neck and reduced discomfort and sores. This work presents the design, modeling, development, and characterization of a novel multi-degree-of-freedom elastic mechanism designed for neck support. This new type of elastic mechanism allows the bending of the head in the sagittal and coronal planes, and head rotations in the transverse plane. From these articulate movements, the mechanism generates moments that restore the head and neck to the upright posture, thus compensating for the muscle weakness caused by DHS. The experimental results show adherence to the empirical characterization of the elastic mechanism under flexion to the model-based calculations. A neck support orthosis prototype based on the proposed mechanism is presented, which enables the three before-mentioned head motions of a healthy participant, according to the results of preliminary tests., Comment: 6th IEEE-RAS International Conference on Soft Robotics (RoboSoft), 2023

Our goal is to develop fine-grained real-image editing methods suitable for real-world applications. In this paper, we first summarize four requirements for these methods and propose a novel diffusion-based image editing framework with pixel-wise guidance that satisfies these requirements. Specifically, we train pixel-classifiers with a few annotated data and then infer the segmentation map of a target image. Users then manipulate the map to instruct how the image will be edited. We utilize a pre-trained diffusion model to generate edited images aligned with the user's intention with pixel-wise guidance. The effective combination of proposed guidance and other techniques enables highly controllable editing with preserving the outside of the edited area, which results in meeting our requirements. The experimental results demonstrate that our proposal outperforms the GAN-based method for editing quality and speed., Comment: Accepted by AI for Content Creation (AI4CC) workshop at CVPR 2023

In immersive humanoid robot teleoperation, there are three main shortcomings that can alter the transparency of the visual feedback: the lag between the motion of the operator's and robot's head due to network communication delays or slow robot joint motion. This latency could cause a noticeable delay in the visual feedback, which jeopardizes the embodiment quality, can cause dizziness, and affects the interactivity resulting in operator frequent motion pauses for the visual feedback to settle; (ii) the mismatch between the camera's and the headset's field-of-views (FOV), the former having generally a lower FOV; and (iii) a mismatch between human's and robot's range of motions of the neck, the latter being also generally lower. In order to leverage these drawbacks, we developed a decoupled viewpoint control solution for a humanoid platform which allows visual feedback with low-latency and artificially increases the camera's FOV range to match that of the operator's headset. Our novel solution uses SLAM technology to enhance the visual feedback from a reconstructed mesh, complementing the areas that are not covered by the visual feedback from the robot. The visual feedback is presented as a point cloud in real-time to the operator. As a result, the operator is fed with real-time vision from the robot's head orientation by observing the pose of the point cloud. Balancing this kind of awareness and immersion is important in virtual reality based teleoperation, considering the safety and robustness of the control system. An experiment shows the effectiveness of our solution., Comment: IEEE-RAS International Conference on Humanoid Robots (Humanoids 2022)

Autonomous navigation in highly populated areas remains a challenging task for robots because of the difficulty in guaranteeing safe interactions with pedestrians in unstructured situations. In this work, we present a crowd navigation control framework that delivers continuous obstacle avoidance and post-contact control evaluated on an autonomous personal mobility vehicle. We propose evaluation metrics for accounting efficiency, controller response and crowd interactions in natural crowds. We report the results of over 110 trials in different crowd types: sparse, flows, and mixed traffic, with low- (< 0.15 ppsm), mid- (< 0.65 ppsm), and high- (< 1 ppsm) pedestrian densities. We present comparative results between two low-level obstacle avoidance methods and a baseline of shared control. Results show a 10% drop in relative time to goal on the highest density tests, and no other efficiency metric decrease. Moreover, autonomous navigation showed to be comparable to shared-control navigation with a lower relative jerk and significantly higher fluency in commands indicating high compatibility with the crowd. We conclude that the reactive controller fulfils a necessary task of fast and continuous adaptation to crowd navigation, and it should be coupled with high-level planners for environmental and situational awareness., Comment: \c{opyright}IEEE All rights reserved. IEEE-IROS-2022, Oct.23-27. Kyoto, Japan

We present a personal mobility device for lower-body impaired users through a light-weighted exoskeleton on wheels. On its core, a novel passive exoskeleton provides postural transition leveraging natural body postures with support to the trunk on sit-to-stand and stand-to-sit (STS) transitions by a single gas spring as an energy storage unit. We propose a direction-dependent coupling of knees and hip joints through a double-pulley wire system, transferring energy from the torso motion towards balancing the moment load at the knee joint actuator. Herewith, the exoskeleton maximizes energy transfer and the naturalness of the user's movement. We introduce an embodied user interface for hands-free navigation through a torso pressure sensing with minimal trunk rotations, resulting on average $19^{\circ} \pm 13^{\circ}$ on six unimpaired users. We evaluated the design for STS assistance on 11 unimpaired users observing motions and muscle activity during the transitions. Results comparing assisted and unassisted STS transitions validated a significant reduction (up to $68\%$ $p<0.01$) at the involved muscle groups. Moreover, we showed it feasible through natural torso leaning movements of $+12^{\circ}\pm 6.5^{\circ}$ and $- 13.7^{\circ} \pm 6.1^{\circ}$ for standing and sitting, respectively. Passive postural transition assistance warrants further work on increasing its applicability and broadening the user population., Comment: IEEE/ASME Transactions on Mechatronics. 2022. 11 pages. doi: 10.1109/TMECH.2021.3135453

This work proposes an autonomous docking control for nonholonomic constrained mobile robots and applies it to an intelligent mobility device or wheelchair for assisting the user in approaching resting furniture such as a chair or a bed. We defined a virtual landmark inferred from the target docking destination. Then, we solve the problem of keeping the targeted volume inside the field of view (FOV) of a tracking camera and docking to the virtual landmark through a novel definition that enables to control for the desired end-pose. In this article, we proposed a nonlinear feedback controller to perform the docking with the depth camera's FOV as a constraint. Then, a numerical method is proposed to find the feasible space of initial states where convergence could be guaranteed. Finally, the entire system was embedded for real-time operation on a standing wheelchair with the virtual landmark estimation by 3D object tracking with an RGB-D camera and we validated the effectiveness in simulation and experimental evaluations. The results show the guaranteed convergence for the feasible space depending on the virtual landmark location. In the implementation, the robot converges to the virtual landmark while respecting the FOV constraints., Comment: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2021), JULY 12-16. Virtual Conference hosted by TU Delft, Delft, The Netherlands. Presentation video: https://www.youtube.com/watch?v=p6DzbjV6w4c

Affective Behavior Analysis is an important part in human-computer interaction. Existing multi-task affective behavior recognition methods suffer from the problem of incomplete labeled datasets. To tackle this problem, this paper presents a semi-supervised model with a mean teacher framework to leverage additional unlabeled data. To be specific, a multi-task model is proposed to learn three different kinds of facial affective representations simultaneously. After that, the proposed model is assigned to be student and teacher networks. When training with unlabeled data, the teacher network is employed to predict pseudo labels for student network training, which allows it to learn from unlabeled data. Experimental results showed that our proposed method achieved much better performance than baseline model and ranked 4th in both competition track 1 and track 2, and 6th in track 3, which verifies that the proposed network can effectively learn from incomplete datasets.