Search

This study examines the application of transition metal-doped SrTiO3 in photovoltaic technologies, such as photocatalysis. The core objective is to evaluate how different dopants influence the structural and electronic characteristics of the well-known perovskite, SrTiO3 (STO). By incorporating dopants, particularly transition metals, the material's physical properties can be enhanced by addressing limitations such as the large gap in the valence band. This study aims to determine the impact of these metals on factors like crystallite size, internal stress levels, electron-hole pair distribution in the valence band, and the shift in the electromagnetic spectrum toward the visible range. The primary focus is on assessing nickel's (Ni) influence on these properties, with additional investigation into the effects of yttrium (Y) and iron (Fe). Several experimental methods were employed to analyze the structural and electronic properties of SrTiO3. The same procedures were applied consistently across all samples, with the sole exception being the high-temperature XRD experiments, as described in the text. The techniques used include magnetron pulse deposition for sample preparation, followed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). After conducting the experiments, the collected data were evaluated and used to guide subsequent steps. Finally, all data were consolidated and analyzed comprehensively., Comment: 15 pages, 9 figures

We combined photoelemission spectroscopy with first-principle calculations to investigate structural and electronic properties of SrTiO$_{3}$ doped with Ni impurities. In SrTiO$_{3}$ polycrystalline thin films, grown by magnetron sputtering, the mean size of the crystallites increases with the concentration of Ni. To determine the electronic band structure of SrTiO$_{3}$ films doped with Ni, high quality ordered pristine and SrTiO3:Ni$_{x}$ films with x=0.06 and 0.12 were prepared by pulsed laser deposition. Electronic band structure calculations for the ground state, as well as one-step model photoemission calculations, which were obtained by means of the Korringa-Khon-Rostoker Greens's function method, predicted the formation of localised $3d$-impurity bands in the band gap of SrTiO$_{3}$ close to the valence band maxima. The measured valence bands at the resonance Ni2p excitation and band dispersion confirm these findings., Comment: 12 pages and 7 figures

The two-dimensional electron gas (2DEG) at oxides interfaces and surfaces has attracted large attention in physics and research due to its unique electronic properties and possible application in optoelectronics and nanoelectronics. The origin of 2DEGes at oxide interfaces has been attributed to the well known "polar catastrophe" mechanism. On the other hand, recently a 2DEG was also found on a clean SrTiO3(001) surface where it is formed due to oxygen vacancies. However, these 2DEG systems have been until now found mostly on atomically perfect crystalline samples usually grown by pulsed laser deposition or molecular beam epitaxy i.e. samples which are difficult to be prepared and require specific experimental conditions. Here, we report on the fabrication of SrTiO3 thin films deposited by magnetron sputtering which is suitable for mass-production of samples adapted for nanoelectronic applications. The characterization of their structural and electronic properties was done and compared to those of SrTiO3 single crystals. XRD patterns and SEM micrography show that the deposited films are amorphous and their structure changes to polycrystalline by heating them at 900 {\deg}C. Photoemission spectroscopy (XPS and UPS) was used to study the electronic properties of the films and the crystal. In both, we observe the 2DEG system at Fermi level and the formation of Ti3+ states after heating the surface at 900 {\deg}C., Comment: 6 pages, 3 figures

InBi(001) is formed epitaxially on InAs(111)-A by depositing Bi on to an In-rich surface. Angle-resolved photoemission measurements reveal topological electronic surface states, close to the M bar high symmetry point. This demonstrates a heteroepitaxial system entirely in the III-V family with topological electronic properties. InBi shows coexistence of Bi and In surface terminations, in contradiction with other III-V materials. For the Bi termination, the study gives a consistent physical picture of the topological surface electronic structure of InBi(001) terminated by a Bi bilayer rather than a surface formed by splitting to a Bi monolayer termination. Theoretical calculations based on relativistic density functional theory and the one-step model of photoemission clarify the relationship between the InBi(001) surface termination and the topological surface states, supporting a predominant role of the Bi bilayer termination. Furthermore, a tight-binding model based on this Bi bilayer termination with only Bi-Bi hopping terms, and no Bi-In interaction, gives a deeper insight into the spin texture., Comment: 5 figures, 12 pages (+ Sup.)