Search

Cryo-electron microscopy (cryo-EM) has been widely used to reveal the structures of proteins at atomic resolution. One key challenge is that almost all proteins are predominantly adsorbed to the air-water interface during standard cryo-EM specimen preparation. The interaction of proteins with air-water interface will significantly impede the success of reconstruction and achievable resolution. Here, we highlight the critical role of impenetrable surfactant monolayers in passivating the air-water interface problems, and develop a robust effective method for high-resolution cryo-EM analysis, by using the superstructure GSAMs which comprises surfactant self-assembled monolayers (SAMs) and graphene membrane. The GSAMs works well in enriching the orientations and improving particle utilization ratio of multiple proteins, facilitating the 3.3-Å resolution reconstruction of a 100-kDa protein complex (ACE2-RBD), which shows strong preferential orientation using traditional specimen preparation protocol. Additionally, we demonstrate that GSAMs enables the successful determinations of small proteins (

Oil spills are a frequent perturbation to the marine environment that has rapid and significant impacts on the local microbiome. Previous studies have shown that exposure to synthetic dispersant alone did not enhance heterotrophic microbial activity or oxidation rates of specific hydrocarbon components but increased the abundance of some taxa (e.g., Colwellia). In contrast, exposure to oil, but not dispersants, increased the abundance of other taxa (e.g., Marinobacter) and stimulated hydrocarbon oxidation rates. Here, we advance these findings by interpreting metatranscriptomic data from this experiment to explore how and why specific components of the microbial community responded to distinct organic carbon exposure regimes. Dispersant alone was selected for a unique community and for dominant organisms that reflected treatment- and time-dependent responses. Dispersant amendment also led to diverging functional profiles among the different treatments. Similarly, oil alone was selected for a community that was distinct from treatments amended with dispersants. The presence of oil and dispersants with added nutrients led to substantial differences in microbial responses, likely suggesting increased fitness driven by the presence of additional inorganic nutrients. The oil-only additions led to a marked increase in the expression of phages, prophages, transposable elements, and plasmids (PPTEPs), suggesting that aspects of microbial community response to oil are driven by the mobilome, potentially through viral-associated regulation of metabolic pathways in ciliates and flagellates that would otherwise throttle the microbial community through grazing.IMPORTANCEMicrocosm experiments simulated the April 2010 Deepwater Horizon oil spill by applying oil and synthetic dispersants (Corexit EC9500A and EC9527A) to deep ocean water samples. The exposure regime revealed severe negative alterations in the treatments heterotrophic microbial activity and hydrocarbon oxidation rates. We expanded these findings by exploring metatranscriptomic signatures of the microbial communities during the chemical amendments in the microcosm experiments. Here we report how dominant organisms were uniquely associated with treatment- and time-dependent trajectories during the exposure regimes; nutrient availability was a significant factor in driving changes in metatranscriptomic responses. Remarkable signals associated with PPTEPs showed the potential role of mobilome and viral-associated survival responses. These insights underscore the time-dependent environmental perturbations of fragile marine environments under oil and anthropogenic stress.

Severe cases of hydrocarbon aspiration requiring Extracorporeal Membrane Oxygenation (ECMO) are rarely reported in pediatrics, and 90% of hospitalized patients have a relatively benign clinical course. We describe a 14 month-old female with accidental hydrocarbon ingestion and aspiration due to organic makeup brush cleaner that suffered severe ARDS and multiorgan failure, successfully managed with ECMO and surfactant. She was decannulated after a total of 72 hours on ECMO, extubated on hospital day 15 (HD 15), and discharged home in her normal state of health after one month in the hospital. ECMO and adjunctive therapies such as surfactant may be helpful in the management of severe hydrocarbon pneumonitis and there are limited reports of ECMO as a supportive method for these pediatric patients.

Pineapple waste is a low-cost agro-industrial waste with promising applications in biosurfactant production and alternative non-toxic chemical surfactants. For its use to be viable for commercial purposes, the production as well as the performance of the biosurfactant produced, must be studied; specifically, the functionality of the biosurfactant product can be verified from its surface-activity characteristics. The present study investigated the optimum culture medium of biosurfactant derived from pineapple waste (BPW) as the main carbon source using Acinetobacter calcoaceticus for fermentation and kinetic modelling was performed. The fermentation process was first optimized using the Plackett–Burman and Box–Behnken statistical designs to obtain the maximum yield at optimum conditions. Four significant variables had the most influence on the optimization process (temperature, pineapple waste, agitation, and incubation period), with a maximum biosurfactant yield of 3.09 mg/mL. The kinetic studies revealed that the biomass growth and biosurfactant behaviour best fitted the Mercier model, while the substrate utilization was best represented by the Leudeking-Piret. To understand the behaviour of the biosurfactant towards pyrene, sorption kinetic modelling was performed. The Freundlich isotherm model for adsorption and the pseudo-second-order model for desorption were most effective at describing the biosurfactant sorption behaviour in the soil–surfactant system. The results of this study suggested that it is feasible to produce biosurfactants using pineapple waste as the primary carbon source through fermentation and can be used effectively for soil remediation against oil pollution. [ABSTRACT FROM AUTHOR]

Background: Preventive dental procedures are cornerstones of caries management. Introduction: This research aims to analyze the clinical effectiveness of pit and fissure sealants when applied to etched enamel pretreated with solvents compared to the conventional etch and seal technique. Subjects and Methods: Children and adolescents with clinically healthy occlusal surfaces or noncavitated occlusal carious lesions on permanent first and/or second molars in all four quadrants were randomly allocated into four groups. A total population of 87 participants (348 teeth) were selected for the research based on the inclusion criteria. Following the enrollment, teeth were etched and sequentially assigned for application of Group 1 = Conventional Etch Seal (control group), Group 2 = isopropyl alcohol (IPA), Group 3 = acetone, and Group 4 = ethanol before sealant application. All participants were evaluated for marginal integrity, discoloration, and clinical retention of pit and fissure sealant after 6-month intervals and 12-month intervals using Feigal’s criteria. Results: At 6-month and 12-month intervals, the collected data were compiled and statistically analyzed using the Chi-square test of significance for marginal integrity between groups all four groups. The Wilcoxon rank test was assigned to assess the difference between parameters measured at 6 months and 12 months. A highly significant difference was found between the groups (P < 0.05) for marginal integrity and anatomic form at 6 months and 12 months when intergroup comparison was done using the Kruskal–Wallis test. Conclusion: Surfactants such as IPA and acetone can be adopted while choosing methods for the long-term clinical success of resin-based sealants for increasing wettability and penetration depth.

Wildfires affect soils in multiple ways, leading to numerous challenges for colonizing microorganisms. Although it is thought that fire-adapted microorganisms lie at the forefront of postfire ecosystem recovery, the specific strategies that these organisms use to thrive in burned soils remain largely unknown. Through bioactivity screening of bacterial isolates from burned soils, we discovered that several Paraburkholderia spp. isolates produced a set of unusual rhamnolipid surfactants with a natural methyl ester modification. These rhamnolipid methyl esters (RLMEs) exhibited enhanced antimicrobial activity against other postfire microbial isolates, including pyrophilous Pyronema fungi and Amycolatopsis bacteria, compared to the typical rhamnolipids made by organisms such as Pseudomonas spp. RLMEs also showed enhanced surfactant properties and facilitated bacterial motility on agar surfaces. In vitro assays further demonstrated that RLMEs improved aqueous solubilization of polycyclic aromatic hydrocarbons, which are potential carbon sources found in char. Identification of the rhamnolipid biosynthesis genes in the postfire isolate, Paraburkholderia kirstenboschensis str. F3, led to the discovery of rhlM, whose gene product is responsible for the unique methylation of rhamnolipid substrates. RhlM is the first characterized bacterial representative of a large class of integral membrane methyltransferases that are widespread in bacteria. These results indicate multiple roles for RLMEs in the postfire lifestyle of Paraburkholderia isolates, including enhanced dispersal, solubilization of potential nutrients, and inhibition of competitors. Our findings shed new light on the chemical adaptations that bacteria employ to navigate, grow, and outcompete other soil community members in postfire environments.

The critical micelle concentration (CMC) is a crucial parameter in understanding the self-assembly behavior of surfactants. In this study, we combine simulation and experiment to demonstrate the predictive capability of molecularly informed field theories in estimating the CMC of biologically based protein surfactants. Our simulation approach combines the relative entropy coarse-graining of small-scale atomistic simulations with large-scale field-theoretic simulations, allowing us to efficiently compute the free energy of micelle formation necessary for the CMC calculation while preserving chemistry-specific information about the underlying surfactant building blocks. We apply this methodology to a unique intrinsically disordered protein platform capable of a wide variety of tailored sequences that enable tunable micelle self-assembly. The computational predictions of the CMC closely match experimental measurements, demonstrating the potential of molecularly informed field theories as a valuable tool to investigate self-assembly in bio-based macromolecules systematically.

Background: Preventive dental procedures are cornerstones of caries management. Introduction: This research aims to analyze the clinical effectiveness of pit and fissure sealants when applied to etched enamel pretreated with solvents compared to the conventional etch and seal technique. Subjects and Methods: Children and adolescents with clinically healthy occlusal surfaces or noncavitated occlusal carious lesions on permanent first and/or second molars in all four quadrants were randomly allocated into four groups. A total population of 87 participants (348 teeth) were selected for the research based on the inclusion criteria. Following the enrollment, teeth were etched and sequentially assigned for application of Group 1 = Conventional Etch Seal (control group), Group 2 = isopropyl alcohol (IPA), Group 3 = acetone, and Group 4 = ethanol before sealant application. All participants were evaluated for marginal integrity, discoloration, and clinical retention of pit and fissure sealant after 6-month intervals and 12-month intervals using Feigal's criteria. Results: At 6-month and 12-month intervals, the collected data were compiled and statistically analyzed using the Chi-square test of significance for marginal integrity between groups all four groups. The Wilcoxon rank test was assigned to assess the difference between parameters measured at 6 months and 12 months. A highly significant difference was found between the groups (P < 0.05) for marginal integrity and anatomic form at 6 months and 12 months when intergroup comparison was done using the Kruskal–Wallis test. Conclusion: Surfactants such as IPA and acetone can be adopted while choosing methods for the long-term clinical success of resin-based sealants for increasing wettability and penetration depth. [ABSTRACT FROM AUTHOR]

The hydrophobic effect, a ubiquitous process in biology, is a primary thermodynamic driver of amphiphilic self-assembly. It leads to the formation of unique morphologies including two highly important classes of lamellar and micellar mesophases. The interactions between these two types of structures and their involved components have garnered significant interest because of their importance in key biochemical technologies related to the isolation, purification, and reconstitution of membrane proteins. This work investigates the structural organization of mixtures of the lamellar-forming phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and two zwitterionic micelle-forming surfactants, being n-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (Zwittergent 3-12 or DDAPS) and 1-oleoyl-2-hydroxy-sn-glycero-3-phosphocholine (O-Lyso-PC), when assembled by water vapor hydration with X-ray diffraction measurements, brightfield optical microscopy, wide-field fluorescence microscopy, and atomic force microscopy. The results reveal that multilamellar mesophases of these mixtures can be assembled across a wide range of POPC to surfactant (POPC:surfactant) concentration ratios, including ratios far surpassing the classical detergent-saturation limit of POPC bilayers without significant morphological disruptions to the lamellar motif. The mixed mesophases generally decreased in lamellar spacing (D) and headgroup-to-headgroup distance (Dhh) with a higher concentration of the doped surfactant, but trends in water layer thickness (Dw) between each bilayer in the stack are highly variable. Further structural characteristics including mesophase topography, bilayer thickness, and lamellar rupture force were revealed by atomic force microscopy (AFM), exhibiting homogeneous multilamellar stacks with no significant physical differences with changes in the surfactant concentration within the mesophases. Taken together, the outcomes present the assembly of unanticipated and highly unique mixed mesophases with varied structural trends from the involved surfactant and lipidic components. Modulations in their structural properties can be attributed to the surfactants chemical specificity in relation to POPC, such as the headgroup hydration and the hydrophobic chain tail mismatch. Taken together, our results illustrate how specific chemical complexities of surfactant-lipid interactions can alter the morphologies of mixed mesophases and thereby alter the kinetic pathways by which surfactants dissolve lipid mesophases in bulk aqueous solutions.

Lung surfactant is a complex mixture of phospholipids and surfactant proteins that is produced in alveolar type 2 cells. It prevents lung collapse by reducing surface tension and is involved in innate immunity. Exogenous animal-derived and, more recently, synthetic lung surfactant has shown clinical efficacy in surfactant-deficient premature infants and in critically ill patients with acute respiratory distress syndrome (ARDS), such as those with severe COVID-19 disease. COVID-19 pneumonia is initiated by the binding of the viral receptor-binding domain (RBD) of SARS-CoV-2 to the cellular receptor angiotensin-converting enzyme 2 (ACE2). Inflammation and tissue damage then lead to loss and dysfunction of surface activity that can be relieved by treatment with an exogenous lung surfactant. Surfactant protein B (SP-B) is pivotal for surfactant activity and has anti-inflammatory effects. Here, we study the binding of two synthetic SP-B peptide mimics, Super Mini-B (SMB) and B-YL, to a recombinant human ACE2 receptor protein construct using molecular docking and surface plasmon resonance (SPR) to evaluate their potential as antiviral drugs. The SPR measurements confirmed that both the SMB and B-YL peptides bind to the rhACE2 receptor with affinities like that of the viral RBD-ACE2 complex. These findings suggest that synthetic lung surfactant peptide mimics can act as competitive inhibitors of the binding of viral RBD to the ACE2 receptor.

IntroductionHyperoxia-induced lung injury is characterized by acute alveolar injury, disrupted epithelial-mesenchymal signaling, oxidative stress, and surfactant dysfunction, yet currently, there is no effective treatment. Although a combination of aerosolized pioglitazone (PGZ) and a synthetic lung surfactant (B-YL peptide, a surfactant protein B mimic) prevents hyperoxia-induced neonatal rat lung injury, whether it is also effective in preventing hyperoxia-induced adult lung injury is unknown.MethodUsing adult mice lung explants, we characterize the effects of 24 and 72-h (h) exposure to hyperoxia on 1) perturbations in Wingless/Int (Wnt) and Transforming Growth Factor (TGF)-β signaling pathways, which are critical mediators of lung injury, 2) aberrations of lung homeostasis and injury repair pathways, and 3) whether these hyperoxia-induced aberrations can be blocked by concomitant treatment with PGZ and B-YL combination.ResultsOur study reveals that hyperoxia exposure to adult mouse lung explants causes activation of Wnt (upregulation of key Wnt signaling intermediates β-catenin and LEF-1) and TGF-β (upregulation of key TGF-β signaling intermediates TGF-β type I receptor (ALK5) and SMAD 3) signaling pathways accompanied by an upregulation of myogenic proteins (calponin and fibronectin) and inflammatory cytokines (IL-6, IL-1β, and TNFα), and alterations in key endothelial (VEGF-A and its receptor FLT-1, and PECAM-1) markers. All of these changes were largely mitigated by the PGZ + B-YL combination.ConclusionThe effectiveness of the PGZ + B-YL combination in blocking hyperoxia-induced adult mice lung injury ex-vivo is promising to be an effective therapeutic approach for adult lung injury in vivo.

This systematic review aimed to summarize the available data on the treatment of pulmonary contusions with exogenous surfactants, determine whether this treatment benefits patients with severe pulmonary contusions, and evaluate the optimal type of surfactant, method of administration, and drug concentration. Three databases (MEDline, Scopus, and Web of Science) were searched using the following keywords: pulmonary surfactant, surface‐active agents, exogenous surfactant, pulmonary contusion, and lung contusion for articles published between 1945 and February 2023, with no language restrictions. Four reviewers independently rated the studies for inclusion, and the other four reviewers resolved conflicts. Of the 100 articles screened, six articles were included in the review. Owing to the limited number of papers on this topic, various types of studies were included (two clinical studies, two experiments, and two case reports). In all the studies, surfactant administration improved the selected ventilation parameters. The most frequently used type of surfactant was Curosurf® in the concentration of 25 mg/kg of ideal body weight. In most studies, the administration of a surfactant by bronchoscopy into the segmental bronchi was the preferable way of administration. In both clinical studies, patients who received surfactants required shorter ventilation times. The administration of exogenous surfactants improved ventilatory parameters and, thus, reduced the need for less aggressive artificial lung ventilation and ventilation days. The animal‐derived surfactant Curosurf® seems to be the most suitable substance; however, the ideal concentration remains unclear. The ideal route of administration involves a bronchoscope in the segmental bronchi. [ABSTRACT FROM AUTHOR]

Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co-assembly experiments with plasmonic gold and surfactant-like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD-(ZZ)x -FFPC self-assemble into higher-order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro , a biomarker for SARS-CoV-2. This system is a simple and visual tool that senses Mpro in phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.

Abstract This systematic review aimed to summarize the available data on the treatment of pulmonary contusions with exogenous surfactants, determine whether this treatment benefits patients with severe pulmonary contusions, and evaluate the optimal type of surfactant, method of administration, and drug concentration. Three databases (MEDline, Scopus, and Web of Science) were searched using the following keywords: pulmonary surfactant, surface‐active agents, exogenous surfactant, pulmonary contusion, and lung contusion for articles published between 1945 and February 2023, with no language restrictions. Four reviewers independently rated the studies for inclusion, and the other four reviewers resolved conflicts. Of the 100 articles screened, six articles were included in the review. Owing to the limited number of papers on this topic, various types of studies were included (two clinical studies, two experiments, and two case reports). In all the studies, surfactant administration improved the selected ventilation parameters. The most frequently used type of surfactant was Curosurf® in the concentration of 25 mg/kg of ideal body weight. In most studies, the administration of a surfactant by bronchoscopy into the segmental bronchi was the preferable way of administration. In both clinical studies, patients who received surfactants required shorter ventilation times. The administration of exogenous surfactants improved ventilatory parameters and, thus, reduced the need for less aggressive artificial lung ventilation and ventilation days. The animal‐derived surfactant Curosurf® seems to be the most suitable substance; however, the ideal concentration remains unclear. The ideal route of administration involves a bronchoscope in the segmental bronchi.

Lamellar mesophases of insoluble lipids are readily solubilized by the micellar mesophases of soluble surfactants. This simple process underscores a broad array of biochemical methodologies, including purification, reconstitution, and crystallization of membrane proteins, as well as the isolation of detergent-resistant membrane fractions. Although much is now known about the thermodynamic driving forces of membrane solubilization, the kinetic pathways by which the surfactant alters vesicular mesophases are only beginning to be appreciated. Little is known about how these interactions affect the solubilization of more complex, multilamellar mesophases. Here, we investigate how a common zwitterionic detergent affects the solubilization of a smectic, multilamellar, cylindrical mesophase of lipids, called the myelin figure. Our results reveal that myelin solubilization occurs in a multistep manner, producing a well-defined sequence of morphologically distinct intermediates en route to complete solubilization. The kinetic processes producing these intermediates include (1) coiling, which encompasses the formation, propagation, and tightening of extended helices; (2) thinning, which reflects the unbinding of lamellae in the smectic stacks; and (3) detachment or retraction, which either dissociates the myelinic protrusion from the source lipid mass or returns the myelinic protrusion to the source lipid mass─all in transit toward complete solubilization. These occasionally overlapping steps are most pronounced in single-lipid component myelins, while compositionally graded multicomponent myelins inhibit the coiling step and detach more frequently. Taken together, the appearance of these intermediates during the solubilization of myelins suggests a complex free-energy landscape characterizing myelin solubilization populated by metastable, morphological intermediates correlated with locally minimized changes in energy dependent upon the mesophase's composition. This then predicts the accessibility of structurally distinct, kinetic intermediates─such as loose and tight coiled helices, peeled myelins, retracted tubes, and detached protrusions─before reaching the stable ground state corresponding to a dissolved suspension of mixed surfactant-lipid micelles.

ObjectiveObesity is an established risk factor for higher SARS-CoV-2 viral loads, severe COVID-19 pneumonia requiring hospitalization, and worse outcomes. However, the underlying mechanisms for the increased risk are not well understood. SARS-CoV-2 is a respiratory virus with the primary route of entry through the lungs, where the Spike protein of SARS-CoV-2 binds to the ACE2 receptor on pneumocytes. Lung surfactant produced by type II pneumocytes plays a major role in respiratory defense against infections. Surfactant predominantly contains lipids, especially phosphatidylcholines (PC), and obesity is characterized by aberrant lipid metabolism. We hypothesized that altered lipid composition in lung surfactant in obesity may promote SARS-CoV-2 infection, leading to severe COVID-19 disease.MethodsLipidomic analysis of lung tissue and bronchoalveolar lavage fluid (BALF) was performed using LC-MS/MS. The effects of PCs on SARS-CoV-2 pseudovirus infection were studied in HEK293T cells with ACE2 overexpression and in Vero-E6 cells with endogenous ACE2 expression. For the cell-cell fusion assay, HEK293T-ACE2 and HEK293T expressing SARS-CoV-2 Spike/eGFP were used as the target and effector cells, respectively.ResultsLipidomic analysis revealed that myristic acid-containing dimyristoyl-PC (DMPC) and palmitoylmyristoyl-PC (PMPC) were reduced in lung tissue and BALF from high fat diet-induced obese mice. DMPC and PMPC markedly inhibited wild type and D614G mutant SARS-CoV-2 infection in HEK293T-ACE2 and Vero-E6 cells. Feeding obese mice with trimyristin, the triglycerides of myristic acid, increased DMPC and PMPC levels in lung surfactant. Lipid extract from BALF of trimyristin-treated obese mice mitigated the elevated wild type and D614G mutant SARS-CoV-2 infection. The inhibitory effects of DMPC and PMPC on SARS-CoV-2 infection were reversed by cholesterol.ConclusionsThe reduced DMPC and PMPC in lung surfactant may promote SARS-CoV-2 infection. Increasing DMPC and PMPC in lung surfactant could be an innovative strategy for preventing and treating severe COVID-19 disease in obesity.

Microfluidic-assisted particle fabrication provides a route to circumvent the disadvantages associated with traditional methods of polymeric particle generation, such as low drug loading efficiency, challenges in controlling encapsulated drug release rates, batch-to-batch variability in particle physical properties and formulation instability. However, this approach primarily produces particles with nanometer size dimensions, which limits drug delivery modalities. Herein, we systematically studied parameters for the generation of micron-sized poly(lactic-co-glycolic) acid (PLGA) particles using a microfluidic system, the NanoAssemblr benchtop. Initially, we used two organic solvents that have been reported suitable for the fabrication of PLGA nanoparticles - acetone and acetonitrile. Subsequently, we methodically manipulated polymer concentration, organic: aqueous flow rate ratios, total flow rate, organic phase composition, and surfactant concentration to develop a route for the fabrication of micron-sized PLGA particles. Further, we incorporated hydroxychloroquine (HCQ), a clinically approved drug for malaria and lymphoma, and measured how its incorporation impacted particle physicochemical properties. Briefly, altering the organic phase composition by including ethyl acetate (less polar solvent), resulted in micron-scale particles, as well as increased polydispersity indexes (PDIs). Adjusting the surfactant concentration of poly vinyl alcohol (PVA) after the addition of these solvent mixtures rendered large particles with lower PDI variability. Moreover, encapsulation of HCQ influenced particle hydrodynamic diameter and PDI in a PVA concentration dependent manner. Finally, we demonstrated that unloaded and HCQ-loaded microparticles did not affect the viability of RAW 264.7 macrophages. This study provides an itinerary for fabricating biocompatible, drug-loaded, micron-sized polymeric particles, particularly when the drug of interest is not readily soluble in conventional organic solvents.

ObjectivesSoluble receptor for advanced glycation end products is a known plasma marker of alveolar epithelial injury. However, RAGE is also expressed on cell types beyond the lung, and its activation leads to up-regulation of pro-inflammatory mediators. We sought to examine the relationship between plasma soluble receptor for advanced glycation end products and primary pulmonary dysfunction, extrapulmonary organ dysfunction, and mortality in pediatric acute respiratory distress syndrome patients at two early time points following acute respiratory distress syndrome diagnosis and compare these results to plasma surfactant protein-D, a marker of pure alveolar epithelial injury.DesignProspective observational study.SettingFive academic PICUs.PatientsTwo hundred fifty-eight pediatric patients 30 days to 18 years old meeting Berlin Criteria for acute respiratory distress syndrome.InterventionsNone.Measurements and main resultsPlasma was collected for soluble receptor for advanced glycation end products and surfactant protein-D measurements within 24 hours (day 1) and 48 to 72 hours (day 3) after acute respiratory distress syndrome diagnosis. Similar to surfactant protein-D, plasma soluble receptor for advanced glycation end products was associated with a higher oxygenation index (p < 0.01) and worse lung injury score (p < 0.001) at the time of acute respiratory distress syndrome diagnosis. However, unlike surfactant protein-D, plasma soluble receptor for advanced glycation end products was associated with worse extrapulmonary Pediatric Logistic Organ Dysfunction score during ICU stay (day 3; p < 0.01) and positively correlated with plasma levels of interleukin-6 (p < 0.01), tumor necrosis factor-α (p < 0.01), and angiopoietin-2 (p < 0.01). Among children with indirect lung injury, plasma soluble receptor for advanced glycation end products was associated with mortality independent of age, sex, race, cancer/bone marrow transplant, and Pediatric Risk of Mortality score (day 3; odds ratio, 3.14; 95% CI, 1.46-6.75; p < 0.01).ConclusionsUnlike surfactant protein-D, which is primarily localized to the alveolar epithelium plasma soluble receptor for advanced glycation end products is systemically expressed and correlates with markers of inflammation, extrapulmonary multiple organ dysfunction, and death in pediatric acute respiratory distress syndrome with indirect lung injury. This suggests that unlike surfactant protein-D, soluble receptor for advanced glycation end products is a multifaceted marker of alveolar injury and increased inflammation and that receptor for advanced glycation end products activation may contribute to the pathogenesis of multiple organ failure among children with indirect acute respiratory distress syndrome.

Studying chemical processes at the air-water interface is always challenging. A recent report claimed that H2O2 was formed spontaneously on the surface of condensed water microdroplets. However, a newer report concluded that the detected H2O2 in the previous report could originate in part from the water vapor source that involved ultrasonic atomization of liquid water. Here, this phenomenon is reinvestigated regarding the influence of ultrasonic cavitation, surface modification of droplets, and solutes in the bulk liquid on H2O2 production. When the droplet surfaces were modified by surfactants, H2O2 production did not change, whereas adding gases or inorganic compounds to the bulk solution caused significant changes in H2O2 production. These results confirm that H2O2 formation originates from cavitation in bulk solutions. It is concluded that the air-water interface of water microdroplets itself does not generate H2O2.

BACKGROUND: Dry powder (DP) synthetic lung surfactant may be an effective means of noninvasive delivery of surfactant therapy to premature infants supported with nasal continuous positive airway pressure (nCPAP) in low-resource settings. METHODS: Four experimental DP surfactant formulations consisting of 70% of phospholipids (DPPC:POPG 7:3), 3% Super Mini-B (SMB) or its sulfur-free derivate B-YL as SP-B peptide mimic, 25% of lactose or trehalose as excipient, and 2% of NaCl were formulated using spray drying. In vitro surface activity was confirmed with captive bubble surfactometry. Surfactant particle size was determined with a cascade impactor and inhaled dose was quantified using a spontaneously breathing premature lamb lung model supported with CPAP. In vivo surfactant efficacy was demonstrated in three studies. First, oxygenation and lung compliance were monitored after intratracheal instillation of resuspended DP surfactant in intubated, ventilated, lavaged, surfactant-deficient juvenile rabbits. In dose-response studies, ventilated, lavaged, surfactant-deficient rabbits received 30, 60, 120 or 240 mg/kg of DP B-YL:Lactose or B-YL:Trehalose surfactant by aerosol delivery with a low flow aerosol chamber via their endotracheal tube. Noninvasive aerosolization of DP B-YL:Trehalose surfactant via nasal prongs was tested in spontaneous breathing premature lambs supported with nCPAP. Intratracheal administration of 200 mg/kg of Curosurf®, a liquid porcine surfactant, was used as a positive control. RESULTS: Mass median aerosol diameter was 3.6 μm with a geometric standard deviation of 1.8. All four experimental surfactants demonstrated high surface efficacy of intratracheal instillation of a bolus of ~ 100 mg/kg of surfactant with improvement of oxygenation and lung compliance. In the dose-response studies, rabbits received incremental doses of DP B-YL:Lactose or B-YL:Trehalose surfactant intratracheally and showed an optimal response in oxygenation and lung function at a dose of 120-240 mg/kg. Aerosol delivery via nasal prongs of 1 or 2 doses of ~ 100 mg/kg of B-YL:Trehalose surfactant to premature lambs supported with nCPAP resulted in stabilization of spontaneous breathing and oxygenation and lung volumes comparable to the positive control. CONCLUSION: These studies confirm the clinical potential of DP synthetic lung surfactant with B-YL peptide as a SP-B mimic to alleviate surfactant deficiency when delivered as a liquid bolus or as an aerosol.

The three-dimensional structure of the synthetic lung Surfactant Protein B Peptide Super Mini-B was determined using an integrative experimental approach, including mass spectrometry and isotope enhanced Fourier-transform infrared (FTIR) spectroscopy. Mass spectral analysis of the peptide, oxidized by solvent assisted region-specific disulfide formation, confirmed that the correct folding and disulfide pairing could be facilitated using two different oxidative structure-promoting solvent systems. Residue specific analysis by isotope enhanced FTIR indicated that the N-terminal and C-terminal domains have well defined α-helical amino acid sequences. Using these experimentally derived measures of distance constraints and disulfide connectivity, the ensemble was further refined with molecular dynamics to provide a medium resolution, residue-specific structure for the peptide construct in a simulated synthetic lung surfactant lipid multilayer environment. The disulfide connectivity combined with the α-helical elements stabilize the peptide conformationally to form a helical hairpin structure that resembles critical elements of the Saposin protein fold of the predicted full-length Surfactant Protein B structure.

NKX2.1 is a master regulator of lung morphogenesis and cell specification; however, interactions of NKX2.1 with various transcription factors to regulate cell-specific gene expression and cell fate in the distal lung remain incompletely understood. FOXO1 is a key regulator of stem/progenitor cell maintenance/differentiation in several tissues but its role in the regulation of lung alveolar epithelial progenitor homeostasis has not been evaluated. We identified a novel role for FOXO1 in alveolar epithelial cell (AEC) differentiation that results in the removal of NKX2.1 from surfactant gene promoters and the subsequent loss of surfactant expression in alveolar epithelial type I-like (AT1-like) cells. We found that the FOXO1 forkhead domain potentiates a loss of surfactant gene expression through an interaction with the NKX2.1 homeodomain, disrupting NKX2.1 binding to the SFTPC promoter. In addition, blocking PI-3K/AKT signaling reduces phosphorylated FOXO-1 (p-FOXO1), allowing accumulated nuclear FOXO1 to interact with NKX2.1 in differentiating AEC. Inhibiting AEC differentiation in vitro with keratinocyte growth factor (KGF) maintained an AT2 cell phenotype through increased PI3K/AKT-mediated FOXO1 phosphorylation, resulting in higher levels of surfactant expression. Together these results indicate that FOXO1 plays a central role in AEC differentiation by directly binding NKX2.1 and suggests an essential role for FOXO1 in mediating AEC homeostasis.

We have investigated the use of a novel dual-stage firefighting strategy, where an inert gas is deployed as a carrier agent to discharge foamed water, obtained by mixing environmentally friendly surface-active agents. Here we also report specifically on some in-house built practical strategies. With a view to gauging the relative fire suppression efficacies of the selected agents, each one was discharged as a fine spray onto fires involving hexane, and also optionally where a typical Li-ion battery electrolyte acted as the fuel. In summary, it can be inferred that the air- or nitrogen-detergent formulations showed enhanced fire suppression attributes, in small-scale experiments, as compared with the aqueous medium alone. Furthermore, in almost all cases, the fire extinction property can be attributed mainly to the physical phenomena, produced by the flow of the inert gas, or air and enhanced wettability of the medium. Given that the fire tests were done at a relatively small scale, no definite conclusions can be drawn than those provided above; however, this study warrants further investigation, especially, at a larger scale. [ABSTRACT FROM AUTHOR]

BACKGROUND: Optimal functionality of synthetic lung surfactant for treatment of respiratory distress syndrome in preterm infants largely depends on the quality and quantity of the surfactant protein B (SP-B) peptide mimic and the lipid mixture. B-YL peptide is a 41-residue sulfur-free SP-B mimic with its cysteine and methionine residues replaced by tyrosine and leucine, respectively, to enhance its oxidation resistance. AIM: Testing the structural and functional stability of the B-YL peptide in synthetic surfactant lipids after long-term storage. METHODS: The structural and functional properties of B-YL peptide in surfactant lipids were studied using three production runs of B-YL peptides in synthetic surfactant lipids. Each run was held at 5 °C ambient temperature for three years and analyzed with structural and computational techniques, i.e., MALDI-TOF mass spectrometry, ATR-Fourier Transform Infrared Spectroscopy (ATR-FTIR), secondary homology modeling of a preliminary B-YL structure, and tertiary Molecular Dynamic simulations of B-YL in surfactant lipids, and with functional methods, i.e., captive bubble surfactometry (CBS) and retesting in vivo surface activity in surfactant-deficient young adult rabbits. RESULTS: MALDI-TOF mass spectrometry showed no degradation of the B-YL peptide as a function of stored time. ATR-FTIR studies demonstrated that the B-YL peptide still assumed stable alpha-helical conformations in synthetic surfactant lipids. These structural findings correlated with excellent in vitro surface activity during both quasi-static and dynamic cycling on CBS after three years of cold storage and in vivo surface activity of the aged formulations with improvements in oxygenation and dynamic lung compliance approaching those of the positive control surfactant Curosurf®. CONCLUSIONS: The structure of the B-YL peptide and the in vitro and in vivo functions of the B-YL surfactant were each maintained after three years of refrigeration storage.

Fine control over the mechanical properties of thin sheets underpins transcytosis, cell shape, and morphogenesis. Applying these principles to artificial, liquid-based systems has led to reconfigurable materials for soft robotics, actuation, and chemical synthesis. However, progress is limited by a lack of synthetic two-dimensional membranes that exhibit tunable mechanical properties over a comparable range to that seen in nature. Here, we show that the bending modulus, B, of thin assemblies of nanoparticle surfactants (NPSs) at the oil-water interface can be varied continuously from sub-kBT to 106kBT, by varying the ligands and particles that comprise the NPS. We find extensive departure from continuum behavior, including enormous mechanical anisotropy and a power law relation between B and the buckling spectrum width. Our findings provide a platform for shape-changing liquid devices and motivate new theories for the description of thin-film wrinkling.

The clinical utility of emulsions as delivery vehicles is hindered by a dependence on passive release. Stimuli-responsive emulsions overcome this limitation but rely on external triggers or are composed of nanoparticle-stabilized droplets that preclude sizes necessary for biomedical applications. Here, we employ cleavable poly(2-oxazoline) diblock copolymer surfactants to form perfluorocarbon (PFC) nanoemulsions that release cargo upon exposure to glutathione. These surfactants allow for the first example of redox-responsive nanoemulsions in cellulo. A noncovalent fluorous tagging strategy is leveraged to solubilize a GFP plasmid inside the PFC nanoemulsions, whereupon protein expression is achieved selectively when employing a stimuli-responsive surfactant. This work contributes a methodology for non-viral gene delivery and represents a general approach to nanoemulsions that respond to endogenous stimuli.

Repurposing drugs as treatments for COVID-19, the disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has drawn much attention. Beginning with sigma receptor ligands and expanding to other drugs from screening in the field, we became concerned that phospholipidosis was a shared mechanism underlying the antiviral activity of many repurposed drugs. For all of the 23 cationic amphiphilic drugs we tested, including hydroxychloroquine, azithromycin, amiodarone, and four others already in clinical trials, phospholipidosis was monotonically correlated with antiviral efficacy. Conversely, drugs active against the same targets that did not induce phospholipidosis were not antiviral. Phospholipidosis depends on the physicochemical properties of drugs and does not reflect specific target-based activities-rather, it may be considered a toxic confound in early drug discovery. Early detection of phospholipidosis could eliminate these artifacts, enabling a focus on molecules with therapeutic potential.

Using host-guest chemistries in a biphasic system, a novel supramolecular nanoparticle surfactant (s-NPS) with redox-responsiveness is presented to structure liquids. The in situ assembly/jamming and disassembly/unjamming of s-NPSs at the oil-water interface are reversibly controlled by a switchable redox process, imparting a nanoscale redox-responsiveness, affecting the assemblies on all length scales. "Smart" all-liquid constructs including structured emulsions and programmable liquid devices are easily prepared, showing promising applications in responsive delivery, release, and reaction systems.

Inhaled nitric oxide is approved by FDA for the management of hypoxemic respiratory failure in term and near-term infants. However, approximately a third of patients treated with inhaled nitric oxide fail to have a sustained improvement in oxygenation. Recruitment of the lung with surfactant enables optimal delivery of nitric oxide to the alveolar space leading to effective pulmonary vasodilation.

Rapid, facile, and noncovalent cell membrane modification with alkyl-grafted anionic polymers was sought as an approach to enhance intracellular delivery and bioactivity of cationic peptides. We synthesized a library of acrylic acid-based copolymers containing varying amounts of an amine-reactive pentafluorophenyl acrylate monomer followed by postpolymerization modification with a series of alkyl amines to afford precise control over the length and density of aliphatic alkyl side chains. This synthetic strategy enabled systematic investigation of the effect of the polymer structure on membrane binding, potentiation of peptide cell uptake, pH-dependent disruption of lipid bilayers for endosome escape, and intracellular bioavailability. A subset of these polymers exhibited pKa of ∼6.8, which facilitated stable membrane association at physiological pH and rapid, pH-dependent endosomal disruption upon endocytosis as quantified in Galectin-8-YFP reporter cells. Cationic cell penetrating peptide (CPP) uptake was enhanced up to 15-fold in vascular smooth muscle cells in vitro when peptide treatment was preceded by a 30-min pretreatment with lead candidate polymers. We also designed and implemented a new and highly sensitive assay for measuring the intracellular bioavailability of CPPs based on the NanoLuciferase (NanoLuc) technology previously developed for measuring intracellular protein-protein interactions. Using this split luciferase class of assay, polymer pretreatment enhanced intracellular delivery of the CPP-modified HiBiT peptide up to 30-fold relative to CPP-HiBiT without polymer pretreatment (p < 0.05). The overall structural analyses show that polymers containing 50:50 or 70:30 molar ratios of carboxyl groups to alkyl side chains of 6-8 carbons maximized peptide uptake, pH-dependent membrane disruption, and intracellular bioavailability and that this potentiation effect was maximized by pairing with CPPs with high cationic charge density. These results demonstrate a rapid, mild method for polymer modification of cell surfaces to potentiate intracellular delivery, endosome escape, and bioactivity of cationic peptides.

BackgroundInitial trials of lung-targeted budesonide (0.25 mg/kg) in surfactant to prevent bronchopulmonary dysplasia (BPD) in premature infants have shown benefit; however, the optimal safe dose is unknown.MethodsDose-escalation study of budesonide (0.025, 0.05, 0.10 mg/kg) in calfactatant in extremely low gestational age neonates (ELGANs) requiring intubation at 3-14 days. Tracheal aspirate (TA) cytokines, blood budesonide concentrations, and untargeted blood metabolomics were measured. Outcomes were compared with matched infants receiving surfactant in the Trial Of Late SURFactant (TOLSURF).ResultsTwenty-four infants with mean gestational age 25.0 weeks and 743 g birth weight requiring mechanical ventilation were enrolled at mean age 6 days. Budesonide was detected in the blood of all infants with a half-life of 3.4 h. Of 11 infants with elevated TA cytokine levels at baseline, treatment was associated with sustained decrease (mean 65%) at all three dosing levels. There were time- and dose-dependent decreases in blood cortisol concentrations and changes in total blood metabolites. Respiratory outcomes did not differ from the historic controls.ConclusionsBudesonide/surfactant had no clinical respiratory benefit at any dosing levels for intubated ELGANs. One-tenth the dose used in previous trials had minimal systemic metabolic effects and appeared effective for lung-targeted anti-inflammatory action.

The development of multicellularity is a key evolutionary transition allowing for differentiation of physiological functions across a cell population that confers survival benefits; among unicellular bacteria, this can lead to complex developmental behaviors and the formation of higher-order community structures. Herein, we demonstrate that in the social δ-proteobacterium Myxococcus xanthus, the secretion of a novel biosurfactant polysaccharide (BPS) is spatially modulated within communities, mediating swarm migration as well as the formation of multicellular swarm biofilms and fruiting bodies. BPS is a type IV pilus (T4P)-inhibited acidic polymer built of randomly acetylated β-linked tetrasaccharide repeats. Both BPS and exopolysaccharide (EPS) are produced by dedicated Wzx/Wzy-dependent polysaccharide-assembly pathways distinct from that responsible for spore-coat assembly. While EPS is preferentially produced at the lower-density swarm periphery, BPS production is favored in the higher-density swarm interior; this is consistent with the former being known to stimulate T4P retraction needed for community expansion and a function for the latter in promoting initial cell dispersal. Together, these data reveal the central role of secreted polysaccharides in the intricate behaviors coordinating bacterial multicellularity.

Fatty alcohols (FOHs) are important feedstocks in the chemical industry to produce detergents, cosmetics, and lubricants. Microbial production of FOHs has become an attractive alternative to production in plants and animals due to growing energy demands and environmental concerns. However, inhibition of cell growth caused by intracellular FOH accumulation is one major issue that limits FOH titers in microbial hosts. In addition, identification of FOH-specific exporters remains a challenge and previous studies towards this end are limited. To alleviate the toxicity issue, we exploited nonionic surfactants to promote the export of FOHs in Rhodosporidium toruloides, an oleaginous yeast that is considered an attractive next-generation host for the production of fatty acid-derived chemicals. Our results showed FOH export efficiency was dramatically improved and the growth inhibition was alleviated in the presence of small amounts of tergitol and other surfactants. As a result, FOH titers increase by 4.3-fold at bench scale to 352.6 mg/L. With further process optimization in a 2-L bioreactor, the titer was further increased to 1.6 g/L. The method we show here can potentially be applied to other microbial hosts and may facilitate the commercialization of microbial FOH production.

Polyelectrolyte microcapsules can be produced either by the layer-by-layer assembly technique or the formation of polyelectrolyte complexes at the liquid-liquid interface. Here, we describe the design and construction of DNA microcapsules using the cooperative assembly of DNA and amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH2) at the oil-water interface. "Janus-like" DNA surfactants (DNASs) assemble in situ at the interface, forming an elastic film. By controlling the jamming and unjamming behavior of DNASs, the interfacial assemblies can assume three different physical states: solid-like, elastomer-like, and liquid-like, similar to that seen with thermoplastics upon heating, that change from a glassy to a rubbery state, and then to a viscous liquid. By the interfacial jamming of DNASs, the liquid structures can be locked-in and reconfigured, showing promising potentials for drug delivery, biphasic reactors, and programmable liquid constructs.

Mechanistic-understanding-based selection of excipients may improve formulation development strategies for generic drug products and potentially accelerate their approval. Our study aimed at investigating the effects of molecular excipients present in orally administered FDA-approved drug products on the intestinal efflux transporter, BCRP (ABCG2), which plays a critical role in drug absorption with potential implications on drug safety and efficacy. We determined the interactions of 136 oral molecular excipients with BCRP in isolated membrane vesicles and identified 26 excipients as BCRP inhibitors with IC50 values less than 5 μM using 3H-cholecystokinin octapeptide (3H-CCK8). These BCRP inhibitors belonged to three functional categories of excipients: dyes, surfactants, and flavoring agents. Compared with noninhibitors, BCRP inhibitors had significantly higher molecular weights and SLogP values. The inhibitory effects of excipients identified in membrane vesicles were also evaluated in BCRP-overexpressing HEK293 cells at similar concentrations. Only 1 of the 26 inhibitors of BCRP identified in vesicles inhibited BCRP-mediated 3H-oxypurinol uptake by more than 50%, consistent with the notion that BCRP inhibition depends on transmembrane or intracellular availability of the inhibitors. Collectively, the results of this study provide new information on excipient selection during the development of drug products with active pharmaceutical ingredients that are BCRP substrates.

Background: Tetrabrombisphenol A (TBBPA) is one of the major brominated flame retardants (BFRs) used in waste mobile phone printed circuit boards (WMPPCB) that accounts for approximately 60% of the total BFR market. Methods: The potential of TBBPA removal from WMPPCB leached solution was investigated using micelle-enhanced ultrafiltration (MEUF) in the presence of cationic, anionic, and nonionic surfactants. The efficiency of several parameters including surfactant concentration, transmembrane pressure (TMP), pH, and TBBPA concentration, was evaluated to improve the MEUF. The optimal conditions were used to assess the MEUF for removing TBBPA in a real sample. Results: The cationic surfactant cetylpyridinium chloride (CPC) showed better performance than other surfactants in removing TBBPA due to its electrostatic interactions with anionic forms of TBBPA. The removal efficiency of TBBPA increased from 48.99% to 99.10% by adding a surfactant (less than the critical micelle concentration). Increasing the pH in the range of 5 to 11 increased the efficiency of TBBPA removal due to the increase in the TBBPA solubility in the micelles. TMP had the most significant effect on permeate flux compared to other parameters but did not significantly affect the TBBPA removal efficiency. The MEUF process effectively removed (above 99%) TBBPA in the concentration range of 20 to 80 mg L-1 under optimal conditions. The HPLC-UV analysis of the real sample indicated the removal efficiency of 100% of TBBPA. Conclusion: MEUF using CPC is a critical performance technology for removing TBBPA from the leached solution of electronic waste.

Background: Biosurfactants are valuable microbial products that have significant applications in various industries. The advantages of these compounds are biodegradability, low toxicity, activity in difficult environmental conditions, and the ability to produce oil residues and compounds from the surface of seawater and soils contaminated with oil compounds. The aim of this study was to evaluate the ability of biosurfactants production by Sporosarcina halophila. Methods: For this purpose, to detect the production of biosurfactant by Sporosarcina halophila, quantitative and qualitative screening methods such as hemolysis, oil spreading test and emulsification index test were used. Finally, different concentrations of crude oil in the bacterial growth medium were used to see that this strain can decompose crude oil using biosurfactant production to continue its growth or not. Results: The results showed that this strain is able to produce biosurfactants in oil hemolysis and spreading test with emulsifying activity of more than 30%, indicating that this strain is a suitable strain for biosurfactant production. Also, this strain could grow in the presence of crude oil in its medium as only carbon resource by biosurfactant production. Conclusion: This study showed that the metabolites derived from Sporosarcina halophila strain have emulsifying properties and can be considered as a potent strain in the production of biosurfactants. Also, it was concluded that these biosurfactants are applicable for many different industrial or environmental fields such as bioremediation of crude oil from soil or water by Sporosarcina halophila strain.

Wastewater from car washes may contain many pathogenic microorganisms that can pose a hazard to human health through inhalation of bioaerosols generated during car washing. The aim of this study was to investigate which types of bacteria are present in the wastewater. Over 30 types of bacteria were determined in the examined wastewater, with the cells number at the level 2.86-3.71x106 CFU/mL. The complete inhibition of bacterial growth was observed for D-cycloserine and for a mixture of antibiotics (polymyxin B sulfate, Ceftazidime and Acryflavine HCl). E. coli bacteria were used to determine how the composition of chemicals used to wash cars affects their survival. It was found that the foaming agents (surfactants) do not have an antibacterial effect, unlike the alkaline agents used to remove insects (Insect). The chemicals present in wastewater promote bacterial mutation in the adaptation process. As a result, despite increasing the concentration of Insect solution to 0.5% and extending the contact time to 30 min the amount of bacteria cells in the wastewater decreased only from 2.93x105 to 5.56x102 CFU/mL. [ABSTRACT FROM AUTHOR]

Background and Objectives: Biosurfactants are amphiphilic surface-active agents that mainly produced by various microorganisms. In this study, the anti-biofilm and inhibition of bacterial adhesion activities of two bacterial biosurfactants were investigated. Materials and Methods: After extraction and evaluation of Bacillus cereus and Serratia nematodiphila biosurfctants, inhibition of bacterial adhesion and anti-biofilm effects of them on Staphylococcus aureus and Pseudomonas aeruginosa were determined. Results: On average, the synergistic effect of two bacterial biosurfactants, caused about 60% decrease in adhesion and about 80% decrease in biofilm formation of S. aureus and P. aeruginosa. Conclusion: The results of this study showed that combination of B. cereus and S. nematodiphila biosurfactants would increase the potential of attachment inhibition and biofilm eradication with very low toxicity. [ABSTRACT FROM AUTHOR]

Biology utilizes multiple strategies, including sequestration in lipid vesicles, to raise the rate and specificity of chemical reactions through increases in effective molarity of reactants. We show that micelle-assisted reaction can facilitate native chemical ligations (NCLs) between a peptide-thioester - in which the thioester leaving group contains a lipid-like alkyl chain - and a Cys-peptide modified by a lipid-like moiety. Hydrophobic lipid modification of each peptide segment promotes the formation of mixed micelles, bringing the reacting peptides into close proximity and increasing the reaction rate. The approach enables the rapid synthesis of polypeptides using low concentrations of reactants without the need for thiol catalysts. After NCL, the lipid moiety is removed to yield an unmodified ligation product. This micelle-based methodology facilitates the generation of natural peptides, like Magainin 2, and the derivatization of the protein Ubiquitin. Formation of mixed micelles from lipid-modified reactants shows promise for accelerating chemical reactions in a traceless manner.

Constructing colloidal particles into functional nanostructures, materials, and devices is a promising yet challenging direction. Many optical techniques have been developed to trap, manipulate, assemble, and print colloidal particles from aqueous solutions into desired configurations on solid substrates. However, these techniques operated in liquid environments generally suffer from pattern collapses, Brownian motion, and challenges that come with reconfigurable assembly. Here, we develop an all-optical technique, termed optothermally-gated photon nudging (OPN), for the versatile manipulation and dynamic patterning of a variety of colloidal particles on a solid substrate at nanoscale accuracy. OPN takes advantage of a thin surfactant layer to optothermally modulate the particle-substrate interaction, which enables the manipulation of colloidal particles on solid substrates with optical scattering force. Along with in situ optical spectroscopy, our non-invasive and contactless nanomanipulation technique will find various applications in nanofabrication, nanophotonics, nanoelectronics, and colloidal sciences.

The transport and retention behavior of polymer- (PVP-AgNP) and surfactant-stabilized (AgPURE) silver nanoparticles in carbonate-dominated saturated and unconsolidated porous media was studied at the laboratory scale. Initial column experiments were conducted to investigate the influence of chemical heterogeneity (CH) and nano-scale surface roughness (NR) arising from mixtures of clean, positively charged calcium carbonate sand (CCS), and negatively charged quartz sands. Additional column experiments were performed to elucidate the impact of CH and NR arising from the presence and absence of soil organic matter (SOM) on a natural carbonate-dominated aquifer material. The role of the nanoparticle capping agent was examined under all conditions tested in the column experiments. Nanoparticle transport was well described using a numerical model that facilitated blocking on one or two retention sites. Results demonstrate that an increase in CCS content in the artificially mixed porous medium leads to delayed breakthrough of the AgNPs, although AgPURE was much less affected by the CCS content than PVP-AgNPs. Interestingly, only a small portion of the solid surface area contributed to AgNP retention, even on positively charged CCS, due to the presence of NR which weakened the adhesive interaction. The presence of SOM enhanced the retention of AgPURE on the natural carbonate-dominated aquifer material, which can be a result of hydrophobic or hydrophilic interactions or due to cation bridging. Surprisingly, SOM had no significant impact on PVP-AgNP retention, which suggests that a reduction in electrostatic repulsion due to the presence of SOM outweighs the relative importance of other binding mechanisms. Our findings are important for future studies related to AgNP transport in shallow unconsolidated calcareous and siliceous sands.

The epiphytic bacterium Pseudomonas syringae strain B728a produces the biosurfactant syringafactin, which is hygroscopic. The water-absorbing potential of syringafactin is high. Syringafactin attracts 250% of its weight in water at high relative humidities but is less hygroscopic at lower relative humidities. This finding suggests that the benefit of syringafactin to the producing cells is strongly context dependent. The contribution of syringafactin to the water availability around cells on different matrices was assessed by examining the water stress exhibited by biosensor strains expressing gfp via the water-stress-activated proU promoter. Wild-type cells exhibited significantly less green fluorescent protein (GFP) fluorescence than a syringafactin-deficient strain on dry filters in atmospheres of high water saturation, as well as on leaf surfaces, indicating greater water availability. When infiltrated into the leaf apoplast, wild-type cells also subsequently exhibited less GFP fluorescence than the syringafactin-deficient strain. These results suggest that the apoplast is a dry but humid environment and that, just as on dry but humid leaf surfaces, syringafactin increases liquid water availability and reduces the water stress experienced by P. syringaeIMPORTANCE Many microorganisms, including the plant pathogen Pseudomonas syringae, produce amphiphilic compounds known as biosurfactants. While biosurfactants are known to disperse hydrophobic compounds and to reduce water tension, they have other properties that can benefit the cells that produce them. Leaf-colonizing bacteria experience frequent water stress, since liquid water is present only transiently on or in leaf sites that they colonize. The demonstration that syringafactin, a biosurfactant produced by P. syringae, is sufficiently hygroscopic to increase water availability to cells, thus relieving water stress, reveals that P. syringae can modify its local habitat both on leaf surfaces and in the leaf apoplast. Such habitat modification may be a common role for biosurfactants produced by other bacterial species that colonize habitats (such as soil) that are not always water saturated.

The ability to manipulate droplets on a substrate using electric signals1-known as digital microfluidics-is used in optical2,3, biomedical4,5, thermal6 and electronic7 applications and has led to commercially available liquid lenses8 and diagnostics kits9,10. Such electrical actuation is mainly achieved by electrowetting, with droplets attracted towards and spreading on a conductive substrate in response to an applied voltage. To ensure strong and practical actuation, the substrate is covered with a dielectric layer and a hydrophobic topcoat for electrowetting-on-dielectric (EWOD)11-13; this increases the actuation voltage (to about 100 volts) and can compromise reliability owing to dielectric breakdown14, electric charging15 and biofouling16. Here we demonstrate droplet manipulation that uses electrical signals to induce the liquid to dewet, rather than wet, a hydrophilic conductive substrate without the need for added layers. In this electrodewetting mechanism, which is phenomenologically opposite to electrowetting, the liquid-substrate interaction is not controlled directly by electric field but instead by field-induced attachment and detachment of ionic surfactants to the substrate. We show that this actuation mechanism can perform all the basic fluidic operations of digital microfluidics using water on doped silicon wafers in air, with only ±2.5 volts of driving voltage, a few microamperes of current and about 0.015 times the critical micelle concentration of an ionic surfactant. The system can also handle common buffers and organic solvents, promising a simple and reliable microfluidic platform for a broad range of applications.

Small-molecule cationic amphiphiles (CAms) were designed to combat the rapid rise in drug-resistant bacteria. CAms were designed to target and compromise the structural integrity of bacteria membranes, leading to cell rupture and death. Discrete structural features of CAms were varied, and structure-activity relationship studies were performed to guide the rational design of potent antimicrobials with desirable selectivity and cytocompatibility profiles. In particular, the effects of cationic conformational flexibility, hydrophobic domain flexibility, and hydrophobic domain architecture were evaluated. Their influence on antimicrobial efficacy in Gram-positive and Gram-negative bacteria was determined, and their safety profiles were established by assessing their impact on mammalian cells. All CAms have a potent activity against bacteria, and hydrophobic domain rigidity and branched architecture contribute to specificity. The insights gained from this project will aid in the optimization of CAm structures.

BackgroundBronchopulmonary dysplasia (BPD) is an orphan disease and advances in prevention and treatment are lacking. The clinical efficacy of systemic corticosteroid therapy to reduce the severity of lung disease and BPD is highly variable. Our objective was to assess whether candidate SNPs in corticosteroid metabolism and response genes are associated with short-term phenotypic response to systemic corticosteroids in infants at high risk for BPD.MethodsPharmacogenetic analysis of data from a large randomized controlled trial (TOLSURF) in infants treated with dexamethasone or hydrocortisone using multivariate linear regression. The primary outcome was a change in respiratory severity score (RSS, mean airway pressure x FiO2) at day 7 of corticosteroid treatment.Resultsrs7225082 in the intron of CRHR1 is significantly associated with the magnitude of decrease in RSS 7 days after starting treatment with systemic corticosteroid (meta-analysis P = 2.8 × 10-4). Each T allele at rs7225082 is associated with a smaller absolute change in RSS at day 7, i.e., less response to systemic corticosteroids.ConclusionsGenetic variability is associated with corticosteroid responsiveness with regard to respiratory status in preterm infants. Identification of genetic markers of corticosteroid responsiveness may allow for therapeutic individualization, with the goal of optimizing the risk-to-benefit ratio for an individual child.

Multi-walled carbon nanotubes (MWCNTs) are increasing used in commercial applications and may be released into the environment with anionic surfactants, such as sodium dodecylbenzenesulfonate (SDBS), in sewer discharge. Little research has examined the transport, retention, and remobilization of MWCNTs in the presence or absence of SDBS in porous media with controlled chemical heterogeneity, and batch and column scale studies were therefore undertaken to address this gap in knowledge. The adsorption isotherms of SDBS on quartz sand (QS), goethite coated quartz sand (GQS), and MWCNTs were determined. Adsorption of SDBS (MWCNTs » GQS > QS) decreased zeta potentials for these materials, and produced a charge reversal for goethite. Transport of MWCNTs (5 mg L-1) dramatically decreased with an increase in the fraction of GQS from 0 to 0.1 in the absence of SDBS. Conversely, co-injection of SDBS (10 and 50 mg L-1) and MWCNTs radically increased the transport of MWCNTs when the GQS fraction was 0, 0.1, and 0.3, especially at a higher SDBS concentration, and altered the shape of retention profile. Mathematical modeling revealed that competitive blocking was not the dominant mechanism for the SDBS enhancement of MWCNT transport. Rather, SDBS sorption increased MWCNT transport by increasing electrostatic and/or steric interactions, or creating reversible interactions on rough surfaces. Sequential injection of pulses of MWCNTs and SDBS in sand (0.1 GQS fraction) indicated that SDBS could mobilize some of retained MWCNTs from the top to deeper sand layers, but only a small amount of released MWCNTs were recovered in the effluent. SDBS therefore had a much smaller influence on MWCNT transport in sequential injection than in co-injection, presumably because of a greater energy barrier to MWCNT release than retention. This research sheds novel insight on the roles of competitive blocking, chemical heterogeneity and nanoscale roughness, and injection sequence on MWCNT retention and release.