Search

Cases of sexual violence and harassment have recently occurred among the public. Many print and non-print media report on issues of sexual violence and harassment. The PPP case is an abuse of the relationship between women and men which harms one of the parties because they are harassed or degraded in dignity, either verbally or non-verbally. Semarang was the highest rank in cases of sexual violence in Central Java in 2018. The PPP case reporting mechanism requires victims to go to a service center. Many risks make victims reluctant to report the incident that occurred because they are embarrassed in society and afraid that perpetrators will intimidate them. This paper aims to develop an android-based application to summarize the reporting mechanism by reporting PPP incidents experienced by victims using gadgets. Several menus provided include reporting menu, counseling menu, article menu, and Robo menu to identify categories of forms of harassment based on user input. The application is developed by using a customized waterfall method. Several testing has been developed to evaluate the application, such as Blackbox testing (achieves 100%), usability testing (achieves 79%), and media content testing (achieves 85.45%).

Tujuan penelitian ini adalah memproduksi mesin pembubur kertas dan menganalisis hasil pengujian performansi mesin bubur kertas dengan variasi jenis kertas dan lama waktu produksi. Penelitian ini merupakan penelitian terapan dimana pembuatan mesin menggunakan proses manufaktur sedangkan pengujian performansi mesin menggunakan metode eksperimen. Metode ekperimen dalam penelitian ini dengan melakukan uji coba performansi mesin bubur kertas dimana variabel bebas adalah jenis bahan kertas, dan waktu produksi, sedangkan variabel terikatnya adalah ukuran partikel, dan kapasitas produksi. Hasil uji performansi selanjutnya diamati menggunakan pemeriksaanmakroscopik menggunakan aplikasi infinity analyz. Hasil penelitian ini mendapatkan prototype mesin pembuat bubur kertas kapasitas 6 liter/jam dengan spesifikasi: panjang 1,29 m; lebar 0.646 m; tinggi 1,119 m; daya 1,5 HP. pengujian kapasitas produksi bubur kertas pada variasi waktu 3 menit yaitu sebesar 60 kg/jam, sedangkan hasil pemeriksaan partikel makrodidapatkan ukuran partikel besar lebih dari 1 mm hanya terdapat pada beberapa titik (minor) yang mungkin disebabkan dari bubur kertas yang terlempar ke dinding atas tabung sehinggatidak terproses.

Dengue Hemorrhagic Fever (DHF) is still a health problem in Indonesia, including in West Kalimantan Province. The Integrated Model of Community-Based Total Vector Control (PVTBM) and Sticky Autocidal Mosquito Trap (SAMT) is expected to reduce the density of larvae, so that the incidence of dengue can be reduced to the lowest point in the endemic area of Pontianak. This study analyzed the effects of the PVTBM-SAMT integrated model in controlling dengue vectors in endemic areas of Pontianak City. This type of research is Interrupted time series with a nonequivalent no-treatment control group time series. The sample of this study was 200 houses, consisting of 100 houses in the intervention area and 100 houses in the control area. The results showed a decrease in the mean larval density index in the intervention area, namely; HI was 25%, CI was 11.17%, BI was 38%. Statistical analysis showed that the PVTBM-SAMT integration model had a significant effect on the density of larvae: HI, CI, and BI with p values: 0.049, 0.047, and 0.042. It is recommended that the health office and primary health care be able to apply the PVTBM-SAMT method in controlling DHF vector activities and also in the implementation of surveillance and control of Aedes aegypti vector. Abstrak Demam Berdarah Dengue (DBD) masih menjadi masalah kesehatan di Indonesia, termasuk di Provinsi Kalimantan Barat. Aplikasi Model Terpadu Pengendalian Vektor Total Berbasis Masyarakat (PVTBM) dan Sticky Autocidal Mosquito Trap (SAMT) bertujuan menurunkan densitas Larva. Penelitian ini menganalisis efek model terintegrasi PVTBM-SAMT dalam pengendalian vektor DBD di wilayah endemis Kota Pontianak. Jenis penelitian ini adalah eksperimen murni dengan rancangan Interrupted time series with a nonequivalent no-treatment control group time series. Sampel penelitian ini sebanyak 200 rumah, terdiri dari 100 rumah di wilayah intervensi dan 100 rumah di wilayah pembanding. Hasil penelitian menunjukan terjadi penurunan rerata indeks kepadatan larva pada wilayah intervensi yaitu; HI sebesar 25%, CI sebesar 11,17%, BI sebesar 38% dan wilayah pembanding. Analisis statistik terdapat perbedaan densitas larva: HI, CI, dan BI sebelum dan sesudah perlakuan secara signifikan dengan nilai p: 0,049, 0,047, dan 0,042. Dinas kesehatan dan puskesmasisarankan dapat menerapkan metode PVTBM-SAMT dalam kegiatan pengendalian vektor DBD dan juga dalam pelaksanaan surveilans serta pengendalian vektor Aedes aegypti.

Background and Objective: Object detection is a primary research interest in computer vision. Sperm-cell detection in a densely populated bull semen microscopic observation video presents challenges such as partial occlusion, vast number of objects in a single video frame, tiny size of the object, artifacts, low contrast, and blurry objects because of the rapid movement of the sperm cells. This study proposes an architecture, called DeepSperm, that solves the aforementioned challenges and is more accurate and faster than state-of-the-art architectures. Methods: In the proposed architecture, we use only one detection layer, which is specific for small object detection. For handling overfitting and increasing accuracy, we set a higher network resolution, use a dropout layer, and perform data augmentation on hue, saturation, and exposure. Several hyper-parameters are tuned to achieve better performance. We compare our proposed method with those of a conventional image processing-based object-detection method, you only look once (YOLOv3), and mask region-based convolutional neural network (Mask R-CNN). Results: In our experiment, we achieve 86.91 mAP on the test dataset and a processing speed of 50.3 fps. In comparison with YOLOv3, we achieve an increase of 16.66 mAP point, 3.26 x faster on testing, and 1.4 x faster on training with a small training dataset, which contains 40 video frames. The weights file size was also reduced significantly, with 16.94 x smaller than that of YOLOv3. Moreover, it requires 1.3 x less graphical processing unit (GPU) memory than YOLOv3. Conclusions: This study proposes DeepSperm, which is a simple, effective, and efficient architecture with its hyper-parameters and configuration to detect bull sperm cells robustly in real time. In our experiment, we surpass the state of the art in terms of accuracy, speed, and resource needs., 22 pages, 8 figures, 6 tables, submitted to Computer Methods and Programs in Biomedicine

Tourism is one of the methods to publish the beauty of nature or the uniqueness of culture in a region that spreads from the coast up to the mountains. The distribution and the access to tourist attractions require mobile application. In creating the application, Bellman – Ford algorithm was used to get the shortest route. The algorithm was the Bellman – Ford algorithm which was used to calculate the shortest distance to the tourist attraction on the weighted graph. Testing the functionality of the application used a black box. The results showed that functions on the mobile application could run well. The compatibility testing showed 100% compatibility with a number of Android devices. In addition, the usability testing showed that the application was appropriate to use with percentage by 82.7% of the 30 respondents. The "Rembang tourism" mobile application can be used by users of information about tourism.

Purpose The purpose of this paper is to produce a business incubator training model for students to form graduates in order to have competence in the field of entrepreneurship in an effort to reduce high unemployment. Design/methodology/approach The method used in this study was research and development (R&D) that consisted of the following five stages: first, planning based on the result of initial observation in the field, second, development of training model, third, validity test model, fourth, limited test and fifth, final model determination. This research used and involved 12 beauty successful beauty salon entrepreneurs as validator models of business incubator training management. Findings The test results show that the training model developed is effective in forming entrepreneurship competence of graduates, so it is feasible to be applied in Beauty Education Study Program, Engineering Faculty of Universitas Negeri Semarang. Practical implications The resulted model can be used as a learning model that can develop the skill of entrepreneurship level for students. Originality/value This study provides contribution to the unemployment level decrease and employment acceleration.

Penelitian ini bertujuan untuk mengembangkan model dan menguji kevalidan model pembelajaran keterampilan tata busana terintegrasi kewirausahaan di Madrasah Aliyah. Menggunakan metode penelitian dan pengembangan yang dimodifikasi ke tujuh tahapan (1) potensi dan masalah; (2) studi Literatur dan Pengumpulan data; (3) desain model pembelajaran; (4) validasi desain model; (5) revisi desain; (6) pembuatan model pembelajaran; (7) uji coba terbatas model, sebagai model final yang pelaksanaannya dilaksanakan dalam tahap studi pendahuluan dan tahap pengembangan. Hasil penelitian ini menunjukkan model pembelajaran keterampilan tata busana terintegrasi kewirausahaan yang dikembangkan menghasilkan model konseptual, model hipotetik dan model akhir. Model pembelajaran keterampilan yang dikembangkan dinyatakan valid dan praktis untuk meningkatkan kompetensi siswa, membuat produk dan keterampilan berwirausaha bagi siswa Madrasah Aliyah

In designing a grid-connected photovoltaic generator system, a DC-DC converter is needed to increase the photovoltaic output voltage. In designing this converter, a converter with high static gain is usually used in order to increase the photovoltaic output voltage and obtain high conversion efficiency. However, conventional converter has static gain with low output voltage. Conventional converter can only increase the output voltage from the input voltage when the Duty Cycle is 0.75. To meet the high standard of static gain, an output voltage of 2.93 – 3.59 times the input voltage is required. To overcome that problem, the authors propose the use of DC-DC converter topology. Modification on the conventional converter is carried out by adding capacitors and diodes. With the application of this converter, it can be concluded that the output voltage of the converter can be increased for photovoltaic application.

Prototip Incinerator Untuk Pembakaran Limbah Padat Industri

Thelearningprocessofproductivevocationalprogramshasastrategicroleinnurturing 21

Paper pulper machines a capacity of 83 litres/process must have a low-cost material, robust and safe to operate. Paper pulper machine components analysed are tubes, frames, helical screw shaft and the shaft holder. The method uses a static structural analysis to obtain von mises stress and displacement. Static structural analysis uses finite element analysis with the help of CATIA® Software. The safe component size and lowest cost (safety factor more than 2.5) were selected in this study. Calculation of costs by multiplying the size of the material needs by material prices. Tube components use SUS 304 with thickness variations of 0.5, 0.6, 0.8, 1, 1.5, and 2mm. Frame and shaft holder using L shape ASTM A36 size 40x40mm and 50 x50 mm with thickness variations of 3, 4, and 5 mm respectively. Variations in material size are determined based on standard material sizes available on the market. The simulation result of each component shows the thicker the material, the lower the von mises stress, the lower the displacement and the higher safety factor. Tubes with a thickness of 0.5mm have a von mises stress of 4.43 MPa, a displacement of 4.7 x 104 mm with SF 56.4 is safe and were chosen because of the lowest material costs (IDR 360,009). The frame size was chosen 40x40x3 mm based on the SF frame value (26) with the lowest material cost (IDR 197,800). The shaft holder is also chosen for the size of 40x40x3mm where the SF value (3834) and the lowest material cost (IDR 14,400). Helical screw shaft size is chosen at 0.5mm thickness where SF is 304 and material costs IDR 100,968. The overall results of the static structural analysis on various sizes of the paper pulper machine components showed ovon under Oyield, small displacement, and SF is safe.

The Needed of Power Electricity in Indonesia always increase every year to year. The demand of development power electricity is needed to be balance with increasing of electric power plant, transmission and distribution line, and infrastructure capabilities, so that distribution of power electricity to consumer go in good manner. One problem that often in distribution and transmission of power electricity is occurred faults in transmission and distribution line system. Our research method is doing observation and interview in collect data, and handling electricity the faults in the fields. the faults occurred in work area of PT PLN (Persero) UP3 Tegal divided by internal and external faults. Internal fault is the occurred faults in equipment of supporting power electricity transmission system like electricity components, electricity equipment, electricity substations, and electricity poles. Meanwhile, external faults divided faults by tree, faults by nature, faults by third party, and faults by kite. The faults are handled by PLN using work procedure (SOP). The contribution of the results of this study to science in the field of energy transmission is an analysis technique to minimize faults of middle voltage transmission of electric energy.

The purpose of this study is to investigate the learning effectiveness of the industrial class of vocational high schools (VHS) and to identify the required factors to improve VHS students' skill. This research is an ex-post facto type of causal research to reveal occurred events and to see various factors related to the events. Data collection of learning effectiveness assessment and factors supporting successful VHS students' identification were done through focus group discussion (FGD), interviews, questionnaires, and pre-test-post-test. The samples were 30 students of the industrial class and 30 students of the regular class of class XI TP1. The result shows that the average grade of an industrial student is 81, while the average grade of a regular student is 70.

Education plays an important role in improving the quality of the nation. The laboratory is the place for school learning. This research aims to analyze the management of laboratory and analyze the management of practice equipment and the completeness of practice equipment in SMK N Jawa Tengah. The benefit is that schools improve the quality of the laboratory. Methods in this study using qualitative methods. Informants from this research are teachers, students and laboran in the school. Data collection techniques in this study using observation techniques, interviews and documentation. Data analysis using triangulation analysis, increasing diligence to observe carefully, member check. Stage process in this research that is by researching laboratory management in School and management of practice equipment with attention to every aspect that is aspect of planning, organizing aspect, implementation aspect and supervision aspect. The results of the study generally do not meet the existing standards even though there are already schools that have Laboratory room that has adjusted the standards that are fed by the government, but not yet have good management, the School needs to improve the procurement of facilities and infrastructure equipment practice in the laboratory of beauty, the number of equipment practice, distribution of job desribtion in accordance with its ability, renovation of laboratory space, laboratory equipment laboratory, additional equipment for facials, new modern equipments added, comfort of practical room, addition of facial bed security of electrical installation, storage of practice equipment, laboratory personnel, supervision of cosmetics, supervision of member performance, supervision of activities in the laboratory of beauty.

Woman Muslim (Muslimah) outfit had became trend or been a part of fashion blooming nowdays. The increase of fashion industry has positive impact for Indonesian economic condition. Fashion education and training did not have learning module yet, which is fit with National Worker Competency Standard (SKKNI) for muslimah fashion design. The purpose of this research is to develop muslimah outfit learning module based on National Worker Competency Standard. Research and development method is used for developing learning module, while expert validation technique is used for validating the module, and practition respondent is used for validating the suitable of the module. The developed learning module shows its validity observed on feasibility of content 3.47; feasibility of presentation 3.49; contextual value 3.38, feasibility of graphic 3.46; feasibility of language 3.53. The overall number 17.32 with an average 3.46 with the result that learning module is very valid. The result of data analysis collected from 10 respondents shows that this learning module strongly ready to use observed by content, language and anxiety. The conclution of this research are muslimah outfit learning module based on National Worker Competency Standard declared valid and can be used for school learning as well as training. Learning method with scientific approach involve process competency such as observe, classify, measure, predict, explain, and conclude. Learning module gives alternative competency based media to develop fashion word.

The purposes of this report are: 1) to know how is the working mobility for garment employees, 2) to analyze the factors that caused working mobility, and new working orientation who searched by garment employees. This research is using qualitative and quantitative approach. The Informant in this research is gotten by purposive action. The data collecting techniques are observations, interviews, and documentations. The data analysis is using descriptive qualitative analysis by observing every aspect. The result of research shows that the criteria of the labor migration was high. It can be seen from Ungaran Sari Garment Company. The length of the migration is high, between 1 until 6 months. and the types of new job that searched by the employees is appropriate job vacancy with their competence. Some factors that influence the working mobility are mental of the workers and company management system. The orientation of the new job is feeling comfortable while working.