Search

Introduction MK-7246 is a potent and selective antagonist for chemoattractant receptor-homologous molecule expressed on Th2 cells (CRTH2). Within the pancreas CRTH2 is selectively expressed in pancreatic β-cells where it is believed to play a role in insulin release. Reduction in β-cell mass and insufficient insulin secretion in response to elevated blood glucose levels is a hallmark for type 1 and type 2 diabetes. Reported here is the synthesis of [11C]MK-7246 and initial preclinical evaluation towards CRTH2 imaging. The aim is to develop a method to quantify β-cell mass with PET and facilitate non-invasive studies of disease progression in individuals with type 2 diabetes. Methods The precursor N-desmethyl-O-methyl MK-7246 was synthesized in seven steps and subjected to methylation with [11C]methyl iodide followed by hydrolysis to obtain [11C]MK-7246 labelled in the N-methyl position. Preclinical evaluation included in vitro radiography and immune-staining performed in human pancreatic biopsies. Biodistribution studies were performed in rat by PET-MRI and in pig by PET-CT imaging. Saturable tracer binding was examined in pig by scanning before and after administration of MK-7246 (1 mg/kg). Predicted dosimetry of [11C]MK-7246 in human males was estimated based on the biodistribution in rat. Results [11C]MK-7246 was obtained with activities sufficient for the current investigations (270 ± 120 MBq) and a radiochemical purity of 93 ± 2%. The tracer displayed focal binding in areas with insulin positive islet of Langerhans in human pancreas sections. Baseline uptake in pig was reduced in tissues with known expression of CRTH2 after administration of MK-7246; pancreas (66% reduction) and spleen (88% reduction). [11C]MK-7246 exhibited a safe human predicted dosimetry profile as extrapolated from the rat biodistribution data. Conclusions Initial preclinical in vitro and in vivo evaluations of [11C]MK-7246 show binding and biodistribution properties suitable for PET imaging of CRTH2. Further studies are warranted to assess its potential in β-cell mass imaging and CRTH2 drug development.

Nonactivated phenols have been employed as nucleophiles in the allylation of nonderivatized allylic alcohols to generate allylated phenolic ethers with water as the only byproduct. A Pd[BiPhePhos] catalyst was found to be reactive to give the O-allylated phenols in good to excellent yields in the presence of molecular sieves. The reactions are chemoselective in which the kinetically favored O-allylated products are formed exclusively over the thermodynamically favored C-allylated products.

Palladium-catalyzed allylic substitution of non-derivatized enantioenriched allylic alcohols with a variety of uncharged N-, S-, C- and O-centered nucleophiles using a bidentate BiPhePhos ligand is described. A remarkable effect of the counter ion (X) of the XPd[κ

The present work explores different cyclic allylic carbonates as a potential class of allylcarbamate precursors. The 5-membered carbonate formed a carbamate with very good thermal and pH stability, which could be cleanly deprotected in aqueous solution, in just 30 min with 2 mol% Pd(OAc)2 as catalyst. The polar nature of the installed motif made it possible to deprotect highly unpolar substrates in water as solvent.

MK-7246 is a potent and selective antagonist for chemoattractant receptor-homologous molecule expressed on TThe precursor N-desmethyl-O-methyl MK-7246 was synthesized in seven steps and subjected to methylation with [[Initial preclinical in vitro and in vivo evaluations of [

A mild and robust heterogeneous palladium-catalyzed CO bond cleavage of 2-aryloxy-1-arylethanols using formic acid as reducing agent in air was developed. The cleaved products were isolated in 92–98 % yield; and by slightly varying the reaction conditions, a ketone, an alcohol, or an alkane can be generated in near-quantitative yield. This reaction is applicable to cleaving the b-O-4’-ether bond found in lignin polymers of different origin. The reaction was performed on a lignin polymer model to generate either the monomeric aryl ketone or alkane in a quantitative yield. Moderate depolymerization was achieved with native lignin at similar reaction conditions. Mechanistic studies under kinetic control indicate that an initial palladium-catalyzed dehydrogenation of the alcohol is followed by insertion of palladium to an enol equivalent. A palladium–formato complex reductively cleaves the palladium–enolate complex to generate the ketone.

A palladium-catalyzed transfer hydrogenolysis of primary, secondary, and tertiary benzylic alcohols by formic acid has been developed and studied. The product hydrocarbons were obtained in excellen ...

An atom-efficient route to pyrroles substituted in the β-position has been achieved in four high yielding steps by a combination of Pd, Ru, and Fe catalysis with only water and ethene as side-products. The reaction is general and gives pyrroles substituted in the β-position with linear and branched alkyl, benzyl, or aryl groups in overall good yields. The synthetic route includes a Pd-catalyzed monoallylation step of amines with substituted allylic alcohols that proceeds to yield the monoallylated products in moderate to excellent yields. In a second step, unsymmetrical diallylated aromatic amines are generated from the reaction of a second allylic alcohol with high selectivity in moderate to good yields by control of the reaction temperature. Ru-catalyzed ring-closing metathesis performed on the diallylated aromatic amines yields the pyrrolines substituted in the β-position in excellent yields. By addition of ferric chloride to the reaction mixture, a selective aromatization to yield the corresponding pyrroles substituted in the β-position was achieved. A reaction mechanism involving a palladium hydride, generated from insertion of palladium to O-H of an allyl alcohol, that is responsible for the C-O bond cleavage to generate the π-allyl intermediate is proposed.

Precipitated kraft lignin from black liquor was converted into green diesel in three steps. A mild Ni-catalyzed transfer hydrogenation/hydrogenolysis using 2-propanol generated a lignin residue in which the ethers, carbonyls, and olefins were reduced. An organocatalyzed esterification of the lignin residue with an insitu prepared tall oil fatty acid anhydride gave an esterified lignin residue that was soluble in light gas oil. The esterified lignin residue was coprocessed with light gas oil in a continous hydrotreater to produce a green diesel. This approach will enable the development of new techniques to process commercial lignin in existing oil refinery infrastructures to standardized transportation fuels in the future., RenFuel AB thanks the Swedish Energy Agency for financial support.

A mild and robust heterogeneous palladium-catalyzed CO bond cleavage of 2-aryloxy-1-arylethanols using formic acid as reducing agent in air was developed. The cleaved products were isolated in 92–98 % yield; and by slightly varying the reaction conditions, a ketone, an alcohol, or an alkane can be generated in near-quantitative yield. This reaction is applicable to cleaving the b-O-4’-ether bond found in lignin polymers of different origin. The reaction was performed on a lignin polymer model to generate either the monomeric aryl ketone or alkane in a quantitative yield. Moderate depolymerization was achieved with native lignin at similar reaction conditions. Mechanistic studies under kinetic control indicate that an initial palladium-catalyzed dehydrogenation of the alcohol is followed by insertion of palladium to an enol equivalent. A palladium–formato complex reductively cleaves the palladium–enolate complex to generate the ketone.

The reaction of 2-phenylpropan-2-ol mediated by BiBr3 can, through control of the temp., yield selectively either 4-methyl-2,4-diphenyl-2-pentene or 1,1,3-trimethyl-3-phenylindane. A reaction mecha ...

The mechanism of direct amination of allyl alcohol by a palladium triphenylphosphite complex has been explored. Labelling studies show that the reaction proceeds through a π-allylpalladium intermediate. A second-order dependence of reaction rate on allyl alcohol concentration was observed. Kinetic isotope effect studies and ESI-MS studies are in agreement with a reaction proceeding through a palladium hydride intermediate in which both O-H bond and C-O bond cleavages are involved in rate-determining steps. A stereochemical study supports an outer-sphere nucleophilic attack of the π-allylpalladium intermediate giving complete chiral transfer from starting material to product.

Two known spirodihydrobenzofuran terpenes (1 and 2) were isolated from a mycelium extract of the fungus Stachybotrys nephrospora BCC 3900. Compound 1 (Mer-NF5003F or stachybotrydial) exhibited potent antiviral activity (the IC50 value of 4.32 microg/mL) comparable to the standard drug, acyclovir, while compound 2 was inactive against the HSV-1 virus. Both 1 and 2 possessed antiplasmodial activity (IC50 values of 0.85 and 0.15 microg/mL for 1 and 2, respectively), and were not toxic towards the Vero cell line. A regiospecific conversion of the dialdehyde 1 to the lactone 2 proceeded simply under acidic conditions.

The synthesis of N-aryl, N-tosyl, and N-alkyl pyrrolines from allyl alcohols and amines has been developed. The reaction sequence includes a palladium-catalyzed allylation step in which non-manipul ...

The synthesis of N-aryl, N-tosyl, and N-alkyl pyrrolines from allyl alcohols and amines has been developed. The reaction sequence includes a palladium-catalyzed allylation step in which non-manipulated allyl alcohol is used to generate the diallylated amine in good to excellent yield. An excess of allyl alcohol was necessary for efficient diallylation of the amine, where the excess alcohol could be recycled three times. For aryl and tosyl amines, Pd[P(OPh)(3)](4) was used and for benzyl and alkyl amines a catalytic system comprising Pd(OAc)(2), P(n)Bu(3), and BEt(3) was used. Both the electronic properties and the steric influence of the amine affected the efficiency of the allylation. The isolated diallylated amines were transformed into their corresponding pyrrolines by ring-closing metathesis catalyzed by (H(2)IMes)(PCy(3))Cl(2)RuCHPh in good to excellent yield. A one-pot reaction was developed in which aniline was transformed into the corresponding pyrroline without isolating the diallylated intermediate. This one-pot reaction was successfully scaled-up to 1 mL of aniline in which the N-phenyl pyrroline was isolated in 95% yield. The versatility of the reaction in which 3-methyl-1-phenyl pyrroline was prepared in two-steps was demonstrated.

The first naturally occurring atropisomeric flavans, myristinins B (2), C (2a), E (4), and F (4a), together with their corresponding trans-isomers, myristinins A (1) and D (3), were isolated from the CH2Cl2 extract of Myristica cinnamomea fruits. Compounds 1, the mixture of 2 and 2a, and the mixture of 4 and 4a, exhibited antifungal activity against Candida albicans with IC50 values ranging from 5.9 to 8.8 μg/mL, and they selectively inhibited the enzyme cyclooxygenase-2 (COX-2).

The first naturally occurring atropisomeric flavans, myristinins B (2), C (2a), E (4), and F (4a), together with their corresponding trans-isomers, myristinins A (1) and D (3), were isolated from the CH(2)Cl(2) extract of Myristica cinnamomea fruits. Compounds 1, the mixture of 2 and 2a, and the mixture of 4 and 4a, exhibited antifungal activity against Candida albicans with IC(50) values ranging from 5.9 to 8.8 microg/mL, and they selectively inhibited the enzyme cyclooxygenase-2 (COX-2).