Search

Dimensionality engineering is an effective approach to improve the stability and power conversion efficiency (PCE) of perovskite solar cells (PSCs). A two-dimensional (2D) perovskite assembled from bulky organic cations to cover the surface of three-dimensional (3D) perovskite can repel ambient moisture and suppress ion migration across the perovskite film. This work demonstrates how the thermal stability of the bulky organic cation of a 2D perovskite affects the crystallinity of the perovskite and the optoelectrical properties of perovskite solar cells. Structural analysis of (FAPbI3)0.95(MAPbBr3)0.05 (FA = formamidinium ion, MA = methylammonium ion) mixed with a series of bulky cations shows a clear correlation between the structure of the bulky cations and the formation of surface defects in the resultant perovskite films. An organic cation with primary ammonium structure is vulnerable to a deprotonation reaction under typical perovskite-film processing conditions. Decomposition of the bulky cations results in structural defects such as iodide vacancies and metallic lead clusters at the surface of the perovskite film; these defects lead to a nonradiative recombination loss of charge carriers and to severe ion migration during operation of the device. In contrast, a bulky organic cation with a quaternary ammonium structure exhibits superior thermal stability and results in substantially fewer structural defects at the surface of the perovskite film. As a result, the corresponding PSC exhibits the PCE of 21.6% in a reverse current-voltage scan and a stabilized PCE of 20.1% with an excellent lifetime exceeding 1000 h for the encapsulated device under continuous illumination.

Organometal halide perovskite (OHP) solar cells have been intensively studied because of their promising optoelectronic features, which has resulted in high power conversion efficiencies >23 %. Although OHP solar cells exhibit high power conversion efficiencies, their relatively poor stability is a significant obstacle to their practical use. We report that the chemical stability of OHP solar cells with respect to both moisture and heat can be improved by adding a small amount of Ag to the precursor. Ag doping increases the size of the OHP grains and reduces the size of the amorphous intergranular regions at the grain boundaries, and thereby hinders the infiltration of moisture into the OHP films and their thermal degradation. Quantum mechanical simulation reveals that Ag doping increases the energies of both the hydration reaction and heat-induced vacancy formation in OHP crystals. This procedure also improves the power conversion efficiencies of the resulting solar cells.

Organometal halide perovskite solar cells (PeSCs) with efficiency over 25% and high stability have been reported, however, lead (Pb)-free PeSCs should be developed for the commercialization due to the toxicity of Pb. Among the candidates to replace Pb, tin (Sn) based PeSCs are leading for their low band gap and high efficiency compared to other metal candidates. In the research for Sn-based PeSCs, Sn oxidation is a critical issue to influence on both of the efficiency and stability. Here, we present a simple Cl‾-doping method to increase the resistance to oxidation in Sn-based PeSCs. Cl‾-doped perovskite film had large grains and highly-oriented crystals; these traits increased the electron and hole mobility and reduced the density of trap states in the perovskite film. Cl‾ became located at surface defects, and thereby prevented Sn oxidation. Cl‾ doping yielded PeSCs that had efficiency as high as 7.14%, with high reproducibility and stability under ambient conditions.

Heat shock protein beta-1 (HSPB1), is a ubiquitously expressed, multifunctional protein chaperone. Mutations in HSPB1 result in the development of a late-onset, distal hereditary motor neuropathy type II (dHMN) and axonal Charcot-Marie Tooth disease with sensory involvement (CMT2F). The functional consequences of HSPB1 mutations associated with hereditary neuropathy are unknown. HSPB1 also displays neuroprotective properties in many neuronal disease models, including the motor neuron disease amyotrophic lateral sclerosis (ALS). HSPB1 is upregulated in SOD1-ALS animal models during disease progression, predominately in glial cells. Glial cells are known to contribute to motor neuron loss in ALS through a non-cell autonomous mechanism. In this study, we examined the non-cell autonomous role of wild type and mutant HSPB1 in an astrocyte-motor neuron co-culture model system of ALS. Astrocyte-specific overexpression of wild type HSPB1 was sufficient to attenuate SOD1(G93A) astrocyte-mediated toxicity in motor neurons, whereas, overexpression of mutHSPB1 failed to ameliorate motor neuron toxicity. Expression of a phosphomimetic HSPB1 mutant in SOD1(G93A) astrocytes also reduced toxicity to motor neurons, suggesting that phosphorylation may contribute to HSPB1 mediated-neuroprotection. These data provide evidence that astrocytic HSPB1 expression may play a central role in motor neuron health and maintenance.

Two new D−A polymers ( PBTPBF-HH and PBTPBF-TT ) based on (3 E , 7 E )-3,7-bis(4-(2-decyltetradecyl)-4 H -thieno[3,2- b ]pyrrole-5,6-dione)benzo[1,2- b :4,5- b' ]difuran-2,6(3 H ,7 H )-dione and ( E )-2-(2-(thiophen-2-yl)vinyl)thiophene units with different side-chain positions (head-to-head and tail-to-tail) were synthesized, and the side-chain positions were optimized with respect to their planarity, microstructure and performance as organic thin-film transistors. Both the polymers showed broad absorption spectra (covering 400–1600 nm) and remarkably low bandgaps (ca. 0.8 eV). PBTPBF-HH containing head-to-head linkages had a dual texture, in which face-on and edge-on crystallites coexisted. In contrast, PBTPBF-TT containing tail-to-tail linkages mainly exhibited an edge-on texture. Consequently, PBTPBF-TT showed a much higher transport performance than PBTPBF-HH when evaluated using bottom-gate/top-contact organic thin-film transistors. The best mobilities of above 0.80 cm 2 V −1 s −1 and 0.19 cm 2 V −1 s −1 were obtained for hole and electron, respectively, at the optimized thermal annealing and in the presence of a high boiling point additive. Overall, this study showed that a minimal change in their side-chain positions dramatically optimized the planarity, microstructure, π-stacking orientation, and charge transport performance.

SummaryMutations in superoxide dismutase (SOD1) cause amyotrophic lateral sclerosis (ALS), a neurodegenerative disease characterized by loss of motor neurons and accompanied by accumulation of misfolded SOD1 onto the cytoplasmic faces of intracellular organelles, including mitochondria and the endoplasmic reticulum (ER). Using inhibition of misfolded SOD1 deposition onto mitochondria as an assay, a chaperone activity abundant in nonneuronal tissues is now purified and identified to be the multifunctional macrophage migration inhibitory factor (MIF), whose activities include an ATP-independent protein folding chaperone. Purified MIF is shown to directly inhibit mutant SOD1 misfolding. Elevating MIF in neuronal cells suppresses accumulation of misfolded SOD1 and its association with mitochondria and the ER and extends survival of mutant SOD1-expressing motor neurons. Accumulated MIF protein is identified to be low in motor neurons, implicating correspondingly low chaperone activity as a component of vulnerability to mutant SOD1 misfolding and supporting therapies to enhance intracellular MIF chaperone activity.

Astrocytes isolated from individuals with amyotrophic lateral sclerosis (ALS) are toxic to motor neurons (MNs) and play a non-cell autonomous role in disease pathogenesis. The mechanisms underlying the susceptibility of MNs to cell death remain unclear. Here we report that astrocytes derived from either mice bearing mutations in genes associated with ALS or human subjects with ALS reduce the expression of major histocompatibility complex class I (MHCI) molecules on MNs; reduced MHCI expression makes these MNs susceptible to astrocyte-induced cell death. Increasing MHCI expression on MNs increases survival and motor performance in a mouse model of ALS and protects MNs against astrocyte toxicity. Overexpression of a single MHCI molecule, HLA-F, protects human MNs from ALS astrocyte-mediated toxicity, whereas knockdown of its receptor, the killer cell immunoglobulin-like receptor KIR3DL2, on human astrocytes results in enhanced MN death. Thus, our data indicate that, in ALS, loss of MHCI expression on MNs renders them more vulnerable to astrocyte-mediated toxicity.

Stem cell-derived motor neurons (MNs) are increasingly utilized for modeling disease in vitro and for developing cellular replacement strategies for spinal cord injury and diseases such as spinal muscular atrophy (SMA) and amyotrophic lateral sclerosis (ALS). Human embryonic stem cell (hESC) differentiation into MNs, which involves retinoic acid (RA) and activation of the sonic hedgehog (SHH) pathway is inefficient and requires up to 60 days to develop MNs with electrophysiological properties. This prolonged differentiation process has hampered the use of hESCs, in particular for high-throughput screening. We evaluated the MN gene expression profile of RA/SHH-differentiated hESCs to identify rate-limiting factors involved in MN development. Based on this analysis, we developed an adenoviral gene delivery system encoding for MN inducing transcription factors: neurogenin 2 (Ngn2), islet-1 (Isl-1), and LIM/homeobox protein 3 (Lhx3). Strikingly, delivery of these factors induced functional MNs with mature electrophysiological properties, 11-days after gene delivery, with >60–70% efficiency from hESCs and human induced pluripotent stem cells (hiPSCs). This directed programming approach significantly reduces the time required to generate electrophysiologically-active MNs by approximately 30 days in comparison to conventional differentiation techniques. Our results further exemplify the potential to use transcriptional coding for rapid and efficient production of defined cell types from hESCs and hiPSCs.

Macrophages are innate immune cells that play key roles in regulation of the immune response and in tissue injury and repair. In response to specific innate immune stimuli, macrophages may exhibit signs of endoplasmic reticulum (ER) stress and progress to apoptosis. Factors that regulate macrophage survival under these conditions are poorly understood. In this study, we identified B cell adapter protein (BCAP), a p85 PI3K-binding adapter protein, in promoting survival in response to the combined challenge of LPS and ER stress. BCAP was unique among nine PI3K adapter proteins in being induced >10-fold in response to LPS. LPS-stimulated macrophages incubated with thapsigargin, a sarcoplasmic/endoplasmic reticulum calcium ATPase inhibitor that induces ER stress, underwent caspase-3 activation and apoptosis. Macrophages from BCAP−/− mice exhibited increased apoptosis in response to these stimuli. BCAP-deficient macrophages demonstrated decreased activation of Akt, but not ERK, and, unlike BCAP-deficient B cells, expressed normal amounts of the NF-κB subunits, c-Rel and RelA. Retroviral transduction of BCAP-deficient macrophages with wild-type BCAP, but not a Y4F BCAP mutant defective in binding the SH2 domain of p85 PI3K, reversed the proapoptotic phenotype observed in BCAP-deficient macrophages. We conclude that BCAP is a nonredundant PI3K adapter protein in macrophages that is required for maximal cell survival in response to ER stress. We suggest that as macrophages engage their pathogenic targets, innate immune receptors trigger increased expression of BCAP, which endows them with the capacity to withstand further challenges from ongoing cellular insults, such as ER stress.