Search

Continued SARS-CoV-2 transmission among the human population has meant the evolution of the virus to produce variants of increased infectiousness and virulence, coined variants of concern (VOCs). The last wave of pandemic infections was driven predominantly by the delta VOC, but because of continued transmission and adaptive mutations, the more highly transmissible omicron variant emerged and is now dominant. However, due to waning immunity and emergence of new variants, vaccines alone cannot control the pandemic. The application of an antiviral coating to high-touch surfaces and physical barriers such as masks are an effective means to inactivate the virus and their spread. Here, we demonstrate an environmentally friendly water-borne polymer coating that can completely inactivate SARS-CoV-2 independent of the infectious variant. The polymer was designed to target the highly glycosylated spike protein on the virion surface and inactivate the virion by disruption of the viral membrane through a nano-mechanical process. Our findings show that, even with low amounts of coating on the surface (1 g/m

Anisotropic Janus ("snowman") nanoparticles with a single protrusion are currently made via the solvent swelling-induced method. Here, we demonstrate without the aid of toxic solvents a generally applicable method for the formation of anisotropic polymer nanoparticles directly in water by controlling polymer mobility through tuning its glass transition temperature (T

We rationally designed a monomer that when polymerized formed a well-defined nonionic polymer [poly(2-(methacryloyloxy) ethylureido glycinamide), PMEGA] by reversible addition fragmentation chain transfer with a flat and tunable upper critical solution temperature (UCST) in water. The monomer was made in one pot from commercially available compounds and with ease of purification. Strong hydrogen-bonding side groups on the polymer produced sharp coil-to-globule transitions upon cooling below its UCST. Ideal random copolymers produced with butyl methacrylate also showed flat UCST profiles, in which the UCST increased with a greater butyl methacrylate copolymer composition from 7 to 65 °C. In the presence of NaCl, the UCST decreased linearly with NaCl concentration due to the "salting-in" effect, and it was found that the slopes from the linear decrease of UCST were nearly identical for all copolymer compositions. This new polymer and its copolymers support the hypothesis that strong hydrogen bonding between the side groups allowed the flat UCST to be readily tuned with a high level of predictability. We postulate that this polymer system may provide wide biological applicability similar to that found for the well-used flat lower critical solution temperature (LCST) of poly(

The shape, breadth, and average molecular weight of the overall molecular weight distribution (MWD) largely define polymer properties. In conventional free-radical polymerization, control over this distribution is through the many competing kinetic pathways dominated by radical termination events. "Living"radical polymerization mechanistically minimizes these termination events, providing a facile route to a desired Gaussian distribution with the distribution breadth dependent upon the activity of the catalyst or modulating agent. However, producing unusually shaped distributions can only be achieved through modeling of the complex polymerization kinetics and invoking feeding and other methods. Here, we construct square, slanted, and chair-like MWDs by blending two to four polymers made using a low-reactive RAFT agent with dispersities close to 2. The synthesis of these polymers, unlike that of polymers made with high-reactive RAFT agents, is simple, scalable, and importantly reproducible as the MWD is independent of conversion, making this polymerization method virtually and kinetically model-free. The blending method described here overcomes many of the difficulties in producing unusually shaped MWDs and allows control over the shape and breadth of the MWD. The concept further provides a general synthetic strategy for studying important structure-property relationships of polymers with desired processing and performance characteristics. This is demonstrated by measurement and modeling analysis of the linear viscoelastic properties of selected samples, which provides a way to tailor the properties of polymers by controlling the form of their MWD via blending. Unlike conventional approaches analyzing the effects of the MWD, its actual shape is considered and its effect on the properties is addressed.

Cancer stem cells (CSCs) are primarily responsible for tumour drug resistance and metastasis; thus, targeting CSCs can be a promising approach to stop cancer recurrence. However, CSCs are small in numbers and readily differentiate into matured cancer cells, making the study of their biological features, including therapeutic targets, difficult. The use of three-dimensional (3D) culture systems to enrich CSCs has some limitations, including low sphere forming efficiency, enzymatic digestion that may damage surface proteins, and more importantly no means to sustain the stem properties. A responsive 3D polymer extracellular matrix (ECM) system coated with RGD was used to enrich CSCs, sustain stemness and avoid enzymatic dissociation. RGD was used as a targeting motif and a ligand to bind integrin receptors. We found that the system was able to increase sphere forming efficiency, promote the growth of spheric cells, and maintain stemness-associated properties compared to the current 3D culture. We showed that continuous culture for three generations of colon tumour spheroid led to the stem marker CD24 gradually increasing. Furthermore, the new system could enhance the cancer cell sphere forming ability for the difficult triple negative breast cancer cells, MBA-MD-231. The key stem gene expression for colon cancer also increased with the new system. Further studies indicated that the concentration of RGD, especially at high doses, could inhibit stemness. Taken together, our data demonstrate that our RGD-based ECM system can facilitate the enrichment of CSCs and now allow for the investigation of new therapeutic approaches for colorectal cancer or other cancers.

Conventional self-assembly methods of block copolymers in cosolvents (i.e., usually water and organic solvents) has yet to produce a pure and monodisperse population of nanocubes. The requirement to assemble a nanocube is for the second block to have a high molecular weight. However, such high molecular weight block copolymers usually result in the formation of kinetically trapped nanostructures even with the addition of organic cosolvents. Here, we demonstrate the rapid production of well-defined polymer nanocubes directly in water by utilizing the thermoresponsive nature of the second block (with 263 monomer units), in which the block copolymer was fully water-soluble below its lower critical solution temperature (LCST) and would produce a pure population of nanocubes when heated above this temperature. Incorporating a pH-responsive monomer in the second block allowed us to control the size of the nanocubes in water with pH and the LCST of the block copolymer. We then used the temperature and pH responsiveness to create an adaptive system that changes morphology when using a unique fuel. This fuel (HO + MnO) is highly exothermic, and the solution pH increases with the consumption of HO. Initially, a nonequilibrium spherical nanostructure formed, which transformed over time into nanocubes, and by controlling the exotherm of the reaction, we controlled the time for this transformation. This block copolymer and the water-only method of self-assembly have provided some insights into designing biomimetic systems that can readily adapt to the environmental conditions.

Polymer nanostructures can be designed with tailored properties and functions by varying their shape, chemical compositions, and surface functionality. The poor stability of these soft materials in solvent other than water can be overcome by introducing cross-links. However, cross-linking complex morphologies remains a challenge. Here, by using the temperature-directed morphology transformation method, we show that the symmetric (nanoworm) and asymmetric (tadpole) nanostructure cores can be UV-cross-linked through the coupling of styrene and para-chlorostyrene units found in the core by irradiating at 254 nm for up to 5 h. Once cross-linked, these nanostructures maintain their structure in organic solvent, further allowing us to couple on a water-insoluble pro-fluorescent probe with high efficiency.

Targeting the spleen with nanoparticles could increase the efficacy of vaccines and cancer immunotherapy, and have the potential to treat intracellular infections including leishmaniasis, trypanosome, splenic TB, AIDS, malaria, and hematological disorders. Although, nanoparticle capture in both the liver and spleen has been well documented, there are only a few examples of specific capture in the spleen alone. It is proposed that the larger the nanoparticle size (400 nm) the greater the specificity and capture within the spleen. Here, we synthesized five nanostructures with different shapes (ranging from spheres, worms, rods, nanorattles, and toroids) and poly( N-isopropylacrylamide), PNIPAM, surface coating using the temperature-directed morphology transformation (TDMT) method. Globular PNIPAM (i.e., water insoluble) surface coatings have been shown to significantly increase cell uptake and enhanced enzyme activity. We incorporated a globular component of PNIPAM on the nanostructure surface and examined the in vivo biodistribution of these nanostructures and accumulation in various tissues and organs in a mouse model. The in vivo biodistribution as a function of time was influenced by the shape and PNIPAM surface composition, in which organ capture and retention was the highest in the spleen. The rods (∼150 nm in length and 15 nm in width) showed the highest capture and retention of greater than 35% to the initial injection amount compared to all other nanostructures. It was found that the rods specifically targeted the cells in the red pulp region of the spleen due to the shape and PNIPAM coating of the rod. This remarkable accumulation and selectively into the spleen represents new nanoparticle design parameters to develop new splenotropic effects for vaccines and other therapeutics.

Driving amphiphilic block copolymers to self-assemble into asymmetric and equilibrium nanostructures remains a challenge. Here, we use the temperature-directed morphology transformation (TDMT) method to tailor the self-assembly of block copolymers into asymmetric nanoparticles with either a single (i.e., tadpole) or multi-arm geometry directly in water and at scale (>10 wt % of polymer). These nanostructures were close to or at their equilibrium morphology and not a transient kinetically trapped structure since they did not change with the addition of high amounts of plasticizer, could be freeze-dried and rehydrated without any structural rearrangement.

Polymer nanostructures can be designed with specific properties and functions, such as controlled shape, size, chemical composition, and adaptive ability to change shape or size in response to environmental cues. Precise control to organize polymer chains into uniform nonspherical symmetric and asymmetric nanostructures and at scale remains a synthetic challenge. Here, by using the temperature-directed morphology transformation (TDMT) method we show through a systematic organization of polymer chains the synthesis of well-defined asymmetric (i.e., tadpole) and symmetric (i.e., worm) nanostructures in water at high polymer concentrations. This method further allowed the production of tadpoles with controlled and uniform tail lengths, ranging from 200 to 800 nm. The organization of chains could be driven by environmental conditions to produce adaptive nanostructure systems.