Search

Biostable drinking water, which limits bacterial growth and community changes, is obtained by removing bacterial growth-promoting nutrients, such as assimilable organic carbon (AOC), through a range of treatment processes. To date, various controlled laboratory bacterial growth tests have been developed using different inoculum types to study the growth-promoting nutrients in water. However, many countries have not considered limiting bacterial growth by reducing the growth-promoting nutrients in drinking water, because they primarily use chlorine in their distribution systems. This review provides an overview of the available methods to analyze dissolved growth-promoting nutrients in water and summarizes the current knowledge on nutrient characteristics and concentrations in water from source to tap, through various treatment processes. Bacterial growth-promoting nutrients in surface water are affected by seasonal variables, such as water temperature, precipitation, and algal blooms. The use of groundwater, bank filtration, and artificial recharge of water sources provide low bacterial growth-promoting nutrient concentrations in drinking water. The treatment type as well as operational conditions significantly affect biostable drinking water production. To achieve water biostability, it is important to understand not only the water treatment process but also the distribution conditions, including the impact of pipe materials on the nutrient levels in water. The impact of climate change on biostability as well as the role of complex and particle bound nutrients on microbial growth in drinking water distribution systems should be investigated in future studies.

Since 2021, national standards of South Korea for industrial wastewater discharge to surface water have changed from chemical oxygen demand to total organic carbon for the organic matter. Conventional organic matter parameters (e.g., biochemical oxygen demand, chemical oxygen demand and total organic carbon) are limited means of understanding the behavior of dissolved organic matter in industrial wastewater treatment processes. Thus, the current study used advanced dissolved organic matter characterization tools (e.g., fluorescence excitation emission matrix and size exclusion chromatography-organic carbon detection) to scrutinize industrial wastewater characteristics from three full-scale industrial wastewater treatment plants (IWTPs). The tools were conducive to tracking industrial wastewater sources of total organic carbon, influencing the overall performance of IWTPs, and proposing alternative processes to lower total organic carbon concentration in the effluent. The results of this study suggest that the diagnosis of IWTPs based on dissolved organic matter characteristics could be a useful tool for providing more insight into total organic carbon management.

In this study, the effects of algal organic matter (AOM) from Microcystis aeruginosa on the attenuation of selected trace organic contaminants (TrOCs) were observed in managed aquifer recharge using laboratory scale soil columns. Changes in dissolved organic matter and bacteriological characteristics were also investigated to elucidate the performance of managed aquifer recharge during algal bloom. AOM exhibited a high ratio of biopolymers and low molecular weight neutrals in dissolved organic matter. Dissolved organic matter was effectively removed even after the addition of AOM (4 mg L−1) in the feed water during soil passage; however, the removal rate was significantly reduced under abiotic conditions, confirming that the main removal mechanisms of dissolved organic matter involve biodegradation. AOM exhibited a much higher ratio of assimilable organic carbon/dissolved organic carbon than river water. Attenuation of four hydrophilic acid TrOCs (diclofenac, bezafibrate, ibuprofen, and ketoprofen) was significantly reduced in the presence of AOM during soil passage, but neutral TrOCs were not affected by AOM. It was difficult to remove carbamazepine using managed aquifer recharge. AOM influenced the attenuation of gemfibrozil, diclofenac, bezafibrate, ibuprofen, ketoprofen, carbamazepine, pentoxifylline, and phenacetin even after ozonation, followed by soil passage. Thus, it is important to monitor the removal of some TrOCs in managed aquifer recharge during algal blooms.

From 2022, industrial wastewater discharge regulations in South Korea will replace chemical oxygen demand (COD

A hybridization of managed aquifer recharge (MAR) with pre-oxidation processes was conducted in this study to investigate changes in dissolved organic matter characteristics and the attenuation of selected trace organic contaminants (TrOCs). Potassium permanganate, chlorine, and ozone treatments were used for pre-oxidation, which effectively attenuated some TrOCs, particularly the combination of MAR with ozone achieved 84-99% attenuation. The pre-oxidation step using potassium permanganate showed high removal of carbamazepine (96%). Moreover, MAR was also combined with nanofiltration (NF) as a multi-barrier concept for the removal of persistent TrOCs after MAR. A short-chain polyfluoroalkyl substance (PFAS) was effectively removed after combining MAR columns with NF membranes. Thus, pre-oxidation coupled with MAR followed by NF could potentially enhance the removal of selected TrOCs.

Intermittent water supplies (IWS) are routinely experienced by drinking water distribution systems around the world, either due to ongoing operational practices or due to one off interruptions. During IWS events changing conditions may impact the endemic biofilms leading to hydraulic mobilisation of organic and inorganic materials attached to pipes walls with a resulting degradation in water quality. To study the impact of IWS on the microbiological and physico-chemical characteristics of drinking water, an experimental full-scale chlorinated pipe facility was operated over 60 days under realistic hydraulic conditions to allow for biofilm growth and to investigate flow resumption behaviour post-IWS events of 6, 48 and 144 hours.\ud \ud \ud \ud Turbidity and metal concentrations showed significant responses to flow restarting, indicating biofilm changes, with events greater than 6 hours generating more turbidity responses and hence discolouration risk. The increase in pressure when the system was restarted showed a substantial increase in total cell counts, while the subsequent increases in flow led to elevated turbidity and metals concentrations. SUVA254 monitoring indicated that shorter times of non-water supply increased the risk of aromatic organic compounds and hence risk of disinfection-by-products formation. DNA sequencing indicated that increasing IWS times resulted in increased relative abundance of potential pathogenic microorganisms, such as Mycobacterium, Sphingomonas, and the fungi Penicillium and Cladosporium.\ud \ud \ud \ud Overall findings indicate that shorter IWS result in a higher proportion of aromatic organic compounds, which can potentially react with chlorine and increase risk of disinfection-by-products formation. However, by minimising IWS times, biofilm-associated impacts can be reduced, yet these are complex ecosystems and much remains to be understood about how microbial interactions can be managed to best ensure continued water safe supply.

This study investigated the effects of adding biochar (BC) on the fate of ciprofloxacin (CIP) and its related antibiotic tolerance (AT) in activated sludge. Three activated sludge reactors were established with different types of BC, derived from apple, pear, and mulberry tree, respectively, and one reactor with no BC. All reactors were exposed to an environmentally relevant level of CIP that acted as a definitive selective pressure significantly promoting AT to four representative antibiotics (CIP, ampicillin, tetracycline, and polymyxin B) by up to two orders of magnitude. While CIP removal was negligible in the reactor without BC, the BC-dosed reactors effectively removed CIP (70-95% removals) through primarily adsorption by BC and biodegradation/biosorption by biomass. The AT in the BC-added reactors was suppressed by 10-99%, compared to that without BC. The BC addition played a key role in sequestering CIP, thereby decreasing the selective pressure that enabled the proactive prevention of AT increase. 16S rRNA gene sequencing analysis showed that the BC addition alleviated the CIP-mediated toxicity to community diversity and organisms related to phosphorous removal. Machine learning modeling with random forest and support vector models using AS microbiome data collectively pinpointed Achromobacter selected by CIP and strongly associated with the AT increase in activated sludge. The identification of Achromobacter as an important AT bacteria revealed by the machine learning modeling with multiple models was also validated with a linear Pearson's correlation analysis. Overall, our study highlighted Achromobacter as a potential useful sentinel for monitoring AT occurring in the environment and suggested BC as a promising additive in wastewater treatment to improve micropollutant removal, mitigate potential AT propagation, and maintain community diversity against toxic antibiotic loadings.

A hybrid process of managed aquifer recharge with pre-oxidation was investigated as part of a multiple-barrier approach for safe water production. This study evaluated O3 and O3/H2O2 for the pre-oxidation of urban surface water prior to managed aquifer recharge (MAR) and compared their effectiveness with respect to trace organic contaminants (TrOCs), biostability, and trihalomethane formation potential. The combination of pre-oxidation and MAR was performed using long-term column studies, and the results confirmed the removal of 64 and 56% dissolved organic carbon by using O3 and O3/H2O2, respectively. MAR combined with O3 and O3/H2O2 achieved >50% removal of dissolved organic carbon with the first 5 days of residence time. O3 alone showed better performance in alleviating trihalomethane formation potential during chlorination compared to using O3/H2O2. The pre-oxidation of urban surface water was effective in attenuating selected TrOCs (35 - >99% removal), and subsequent MAR achieved >99% removal of selected TrOCs within the first 5 days, regardless of pretreatment methods examined in this study. The results of this study provide an understanding of the effects of O3 and O3/H2O2 as pre-oxidation processes on urban surface water prior to MAR, as well as the resulting impact on MAR.

Bacterial aerosols resulting from membrane bioreactor (MBR) processes, which require excessive aeration in a confined space, are important to investigate because of their possible adverse effects on human health. This study investigated the influence of solid retention time (SRT) on bacterial aerosols from MBRs. Moreover, powdered activated carbon (PAC) and calcium were used to attenuate bacterial aerosol emissions from MBRs. The particulate matter (PM) emitted from the MBRs was reduced by 30.5 and 25.2% at SRTs of 20 and 80 d, respectively, compared to the level emitted at an SRT of 10 d. Total cell counts were similarly reduced at SRTs of 20 and 80 d. Longer SRTs also led to greater reductions in the particle size distribution of the sludge within 10 μm. Several factors in the MBR influenced the behavior of the bacterial aerosol emissions from the MBRs. This study showed that changes in viscosity and particle size induced by the SRT influenced the bacterial aerosol emissions in MBRs. Therefore, SRT was identified as an important design parameter affecting bacterial aerosol emissions in MBR processes. The amounts of particulate matter and bacterial aerosols were reduced in MBRs using PAC and calcium, both of which exerted an immediate effect on the bacterial aerosol emissions in MBRs by increasing the aerosol-particle size.

This study evaluated the performance of a pilot-scale hybrid constructed wetland system for secondary effluent and investigated bulk organic matter characteristics. The hybrid constructed wetland consisted of a vertical-flow (VF) bed followed by a horizontal-flow (HF) bed. We also investigated the effects of hydraulic loading rates and influent organic load on the performance of the pilot-scale VF-HF hybrid constructed wetland. The results showed a high removal efficiency for suspended solids (>95%) and organic matter as determined by total organic carbon (>98.5%) and dissolved organic carbon (>70%), but no significant change in nitrogen removal was observed. The wetland treatment efficiency for suspended solids and organic matter showed a good buffer capacity even when hydraulic loading rates increased from 750 to 1500 L m−2 d−1 and 500–1000 L m−2 d−1 during the VF and HF stages, respectively. Moreover, there was no significant change in the performance when influent organic load increased eight-fold. Fluorescence excitation-emission matrix and liquid chromatography-organic carbon detection (LC-OCD) were used to investigate the dissolved organic matter characteristics in the hybrid VF-HF constructed wetland. Fluorescence excitation-emission matrix spectroscopy showed that both protein- and humic-like substances did not significantly change in the effluent when hydraulic loading rates and organic load increased by two- and eight-fold, respectively. Biopolymers determined using LC-OCD were effectively removed via the VF and HF stage wetlands, indicating the occurrence of biodegradation. Fluorescence excitation-emission matrix spectroscopy and LC-OCD provided the fate of dissolved organic matter characteristics in the hybrid VF-HF constructed wetland.

This article describes a proof-of-concept study designed for the reuse of wastewater using microbial electrochemical cells (MECs) combined with complementary post-treatment technologies. This study mainly focused on how the integrated approach works effectively for wastewater reuse. In this study, microalgae and ultraviolet C (UVC) light were used for advanced wastewater treatment to achieve site-specific treatment goals such as agricultural reuse and aquifer recharge. The bio-electrosynthesis of H(2)O(2) in MECs was carried out based on a novel concept to integrate with UVC, especially for roust removal of trace organic compounds (TOrCs) resistant to biodegradation, and the algal treatment was configured for nutrient removal from MEC effluent. UVC irradiation has also proven to be an effective disinfectant for bacteria, protozoa, and viruses in water. The average energy consumption rate for MECs fed acetate-based synthetic wastewater was 0.28±0.01 kWh per kg of H(2)O(2), which was significantly more efficient than are conventional electrochemical processes. MECs achieved 89±2% removal of carbonaceous organic matter (measured as chemical oxygen demand) in the wastewater (anolyte) and concurrent production of H(2)O(2) up to 222±11 mg L(−1) in the tapwater (catholyte). The nutrients (N and P) remaining after MECs were successfully removed by subsequent phycoremediation with microalgae when aerated (5% CO(2), v/v) in the light. This complied with discharge permits that limit N to 20 mg L(−1) and P to 0.5 mg L(−1) in the effluent. H(2)O(2) produced on site was used to mediate photolytic oxidation with UVC light for degradation of recalcitrant TOrCs in the algal-treated wastewater. Carbamazepine was used as a model compound and was almost completely removed with an added 10 mg L(−1) of H(2)O(2) at a UVC dose of 1000 mJ cm(−2). These results should not be generalized, but critically discussed, because of the limitations of using synthetic wastewater.

This study is the first to demonstrate the capability of Cl– to markedly accelerate organic oxidation using thermally activated peroxymonosulfate (PMS) under acidic conditions. The treatment effici...

Biofilm formation has been frequently identified as a pathway of nosocomial infection in polymeric tubes used for patients of all ages. Biofilm formation on tube surfaces can lead to hygienic failure and cause diarrhea, stomach pain, inflammation, and digestive system disease. This study investigated the influence of polymeric tube materials in contact with water on the biomass formation potential and migration potential of microbially available carbon from plasticizers using a BioMig test. The thermoplastic elastomer tube, which is reusable, leached a relatively low amount of assimilable organic carbon to water. In contrast, the assimilable organic carbon migration potential of polyurethane was the most significant, 6-fold greater than that of the thermoplastic elastomer. Moreover, the same materials (e.g., silicone) produced via different manufacturing processes showed significant differences in migration behaviors. The potential biomass formation observed in polyurethane was approximately 7 × 109 cells cm−2 for both Aeromonas hydrophila and Escherichia coli strains. This study highlights the importance of choosing the correct material characteristics of polymeric tubes in contact with water to protect them from bacterial contamination. Therefore, manufacturers can use the BioMig test to evaluate and produce more hygienic and biostable tubes.

In this study, the feasibility of the membrane distillation (MD) process as a wastewater reclamation system for portable reuse was investigated. The flux was stably maintained at about 20 L/m2h (LMH) at ΔT 30 °C, compared to higher flux at ΔT 50 °C, which showed a rapid decrease in the flux due to severe fouling. MD produced excellent quality of potable water satisfied the drinking water standards of Korea from effluent of sewage treatment plant (ESTP). The fractions of the hydrophobic OC (HOC) and chromatographic DOC (CDOC) from LC-OCD analysis was firstly suggested to understand different organic transport during the MD process. The transport of organic matters across the MD membrane mitigated at low operation temperature and the transported organics in all the tested waters were mostly volatile low molecular weight organics, aromatic amino acids. All of thirteen selected pharmaceuticals were completely removed by MD, regardless of their properties. In order to retard the membrane fouling of the MD process, coagulation and filtration pre-treatments were applied. The pre-treatment process coupled MD process could successfully remove impurities including NH4-N without severe membrane fouling. Moreover, coagulation pretreatment reduced transport of ammonia due to decrease in pH.

This study achieves a better understanding how Scenedesmus quadricauda microalgae participate in the phycoremediation of a reverse osmosis (RO) concentrate at a high salinity (8000 mg Cl− L− 1). Algal treatment of the RO concentrate under continuous illumination resulted in a notable increase in the biodegradability of dissolved organic matter, subsequent removal of biodegradable fractions, and simultaneous removal of nutrients (N and P). This is the first time that S. quadricauda is shown to induce the degradation of polymeric organic matter in the RO concentrate, which is typically refractory to microbial decomposition. In this study, the mechanisms for algae-induced degradation were investigated by measuring the hydrogen peroxide (H2O2) released out of algal cells and dispersed in the aqueous phase. The algae-induced biodegradation process has an advantage over typical electrochemical oxidation technologies in that photo-sensitive living organisms are capable of self-repair, reproduction, and nutrient uptake. Our results indicate that the use of algae-induced oxidation is highly feasible as a safe, inexpensive technology to pre-treat non- or slowly-biodegradable organic matter in wastewater prior to downstream biological processing.

To evaluate and approve the materials that can be in contact with drinking water with respect to biological contamination, organic carbon migration and biomass formation potential assays are widely employed. In previous studies, to conduct the assays, the entire material was exposed to the test water by submerging the material into glass jars. However, these are not realistic conditions since the water contact only the inner surface of the pipe in the distribution system, which may be different from the outer surface with respect to the coating layers. Furthermore, the extra components such as the glass jar containers and stainless steel holders might be the sources of organic carbon contamination. These two factors may result in imprecise conclusions. Here, we introduced a minor but essential modification to the BioMig test, which is the most current test on the migration potential and biomass formation potential. In this modified BioMig method, the outer surface and cutting edges, which are not in contact with water in practical water distribution systems, would not be exposed to the test water. Moreover, the assimilable organic carbon formation potential via chlorination in the leachates was observed and recommended as an additional test in the migration potential assay. The modified test results demonstrated that polyethylene (PE) material is the most unfavorable material, notably when used in chlorinated drinking water. This proposed test provided an alternative approach to the decision-makers with respect to evaluating the pipe material characteristics.

This study investigated the role of soil mixture blocks (SMBs) in the removal of trace organic contaminants and the changes in dissolved organic matter characteristics in a laboratory-scale multi-soil-layering (MSL) system. The experimental setup included three soil-based water treatment systems, namely MSL, MSL without SMBs (zeolite/slag), and a sand filter. The effect of SMBs in the removal of dissolved organic matter in MSL was not significant, but the use of zeolite/slag in MSL enhanced the removal of humic substances and building blocks. Through membrane fractionation, the size distribution of dissolved organic matter in the MSL system was not changed, and the majority of the dissolved organic matter is below 1 kDa. Ten pharmaceutically active compounds and three endocrine-disrupting compounds were used to investigate the removal of selected trace organic contaminants in the MSL system, zeolite/slag, and sand filter. The attenuation of pentoxifylline, caffeine, 17α-ethinylestradiol, estrone, and 17β-estradiol in the MSL system was similar to that for zeolite/slag, and the removal efficiency was greater than 80%. However, pentoxifylline, caffeine, 17α-ethinylestradiol, estrone, and 17β-estradiol exhibited relatively low removal efficiencies in the sand filter compared to those in the MSL system and zeolite/slag. Results from this study provide insight into the removal of selected trace organic contaminants in MSL system, which could be considered as one of the series of barriers to remove trace organic contaminants in wastewater.

This study investigated the effect of powdered activated carbon and calcium on trihalomethane toxicity in zebrafish embryos and larvae in hybrid membrane bioreactors. Two hybrid membrane bioreactors were configured with the addition of powdered activated carbon or calcium to reduce the trihalomethane formation potential. Trihalomethane formation decreased by approximately 37.2% and 30.3% in membrane bioreactor-powdered activated carbon and membrane bioreactor-calcium, respectively. Additionally, the toxic effect of trihalomethane formation was examined on zebrafish embryos and larvae. About 35% of the embryos exposed to trihalomethanes (800 ppb) showed signs of deformation, with the majority displaying coagulation within 24 h after exposure. Color preference tests, which were conducted to identify any abnormal activities of the embryos, showed an increase in preference from short to longer wavelengths upon exposure to high levels of trihalomethanes. This may indicate damage to the optical organs in zebrafish when exposed to trihalomethanes. Behavioral analysis showed reduced mobility of zebrafish larvae under different trihalomethane concentrations, indicating a decrease in the average activity time with an increasing trihalomethane concentration. The membrane bioreactor effluents were toxic to zebrafish embryos and larvae in the presence of high trihalomethane concentrations. To understand the mechanism behind trihalomethane toxicity, further studies are needed.

In this study, natural organic matter (NOM) characteristics were investigated over three years of monthly monitoring to determine the effect of seasonal variations on NOM levels from source to tap. Liquid chromatography with organic carbon detection (LC-OCD) was used to determine NOM characteristics and the level of reduction of biodegradable dissolved organic carbon (BDOC). The average dissolved organic matter concentration in the source water (Lake Paldang, Korea) was not significantly different between summer and winter. However, the distribution of NOM components, such as biopolymers, building blocks, low molecular weight (MW) neutrals and acids, identified by LC-OCD, varied seasonally. While high MW NOM was preferentially removed by coagulation/sedimentation/rapid sand filtration (CSR), no seasonal effects were observed on the removal of high MW NOM. CSR and biological activated carbon (BAC) filtration showed a better efficiency of BDOC removal in winter and summer, respectively. High concentrations of chlorine used in the treatment plants in summer resulted in 10% higher DOC concentrations during disinfection. Overall NOM removal efficiencies from source to tap were 45% and 35% for summer and winter, respectively. Principal component analysis also indicated that seasonal variations (principal component 1) showed the strongest positive correlation with the overall performance of water treatment. The long-term monitoring of drinking water treatment processes showed that seasonal variations were important factors affecting NOM characteristics during water treatment.

Low-pressure membrane filtration is increasingly used for tertiary treatment of wastewater effluent organic matter (EfOM), mainly comprising organic base/neutral compounds. In-line coagulation with underdosing, charge neutralization, and sweep floc conditions prior to ultrafiltration (UF) was studied to determine removals of the EfOM components and consequent reduction of fouling using polyethersulfone membranes. Coagulation and UF substantially reduced fouling for all coagulation conditions while removing from 7 to 38% of EfOM organic acids. From 7 to 16% of EfOM organic base/neutrals were removed at neutral pH but there was no significant removal for slightly acid coagulation conditions even though fouling was substantially reduced. Sweep floc produced the lowest resistance to filtration but may be inappropriate for in-line use due to the large added volume of solids. Charge-neutralization resulted in poor recovery of the initial flux with hydraulic cleaning. Under-dosing paralleled sweep floc in reducing hydraulic resistance to filtration (for sub-critical flux) and the initial flux was also easily recovered with hydraulic cleaning. Hydrophobic and hydrophilic base/neutrals were identified on the fouled membranes but as previously reported the extent of fouling was not correlated with accumulation of organic base/neutrals.

The influences of natural organic matter (NOM) and bacteriological characteristics on the biological stability of water were investigated in a full-scale drinking water treatment plant. We found that prechlorination decreased the hydrophobicity of the organic matter and significantly increased the high-molecular-weight (MW) dissolved organic matter, such as biopolymers and humic substances. High-MW organic matter and structurally complex compounds are known to be relatively slowly biodegradable; however, because of the prechlorination step, the indigenous bacteria could readily utilise these fractions as assimilable organic carbon. Sequential coagulation and sedimentation resulted in the substantial removal of biopolymer (74%), humic substance (33%), bacterial cells (79%), and assimilable organic carbon (67%). Rapid sand and granular activated carbon filtration induced an increase in the low-nucleic-acid content bacteria; however, these bacteria were biologically less active in relation to enzymatic activity and ATP. The granular activated carbon step was essential to securing biological stability (the ability to prevent bacterial growth) by removing the residual assimilable organic carbon that had formed during the ozone treatment. The growth potential of Escherichia coli and indigenous bacteria were found to differ in respect to NOM characteristics. In comparison with E. coli, the indigenous bacteria utilised a broader range of NOM as a carbon source. Principal component analysis demonstrated that the measured biological stability of water could differ, depending on the NOM characteristics, as well as on the bacterial inoculum selected for the analysis.

A hybrid process of managed aquifer recharge with pre-oxidation was investigated as part of a multiple-barrier approach for safe water production. This study evaluated O

To minimize the aesthetic and hygienic concerns regarding tap water (e.g., odor, taste, suspended solids, and microorganisms), point-of-use (POU) water dispensers and filters are used in households worldwide. However, the POU water dispenser itself can adversely impact water quality. This study investigated the bacterial growth through a POU water dispenser fed with chlorinated tap water; specifically, the heterotrophic plate count increased from 0.01 to 20.01 × 103 of colony-forming units per ml. The BioMig test, which evaluates the biostability of polymeric materials based on the migration potential and the biofilm formation potential, was firstly applied for the water dispenser system. Organic migration and biofilm formation varied by the polymer type used in the water dispenser components (e.g., tubing, fittings, and reservoir). Assimilable organic carbon migration in cold water (23 ± 2 °C) was better correlated with the biofilm formation potential (R = 0.93) than that of warm water (60 ± 2 °C) migration (R = 0.62). The most problematic test material was silicone based on assimilable organic carbon migration and biofilm formation, whereas approved materials such as polyethylene and polyvinyl chloride were relatively stable. Polymeric component examination of an actual POU water dispenser revealed highly accumulated biofilms on the silicone tube used in the device (118 × 103 CFU cm−2). The use of polymers with high biofilm formation should be minimized in water dispensers, whereas approved polymeric components contribute to biological stability in the dispensed drinking water.

This study investigated the fate of selected pharmaceuticals and estrogens and the characteristics of bulk organic matter during pellet softening and proposed a possible hybridization with nanofiltration (NF) treatment. A groundwater softening system called pellet softening was used to remove calcium ions from groundwater by crystallizing calcium carbonate on the surface of sand grains that were used as seeding material. This crystallization was confirmed by X-ray powder diffraction, and X-ray fluorescence and scanning electron micrographs were used to characterize the surface of the sand grains during pellet softening. The fluorescence excitation–emission matrix showed that humic-like substances were slightly removed and that specific UV absorbance values decreased after pellet softening. The humic fraction determined by liquid chromatography-organic carbon detection was slightly more attenuated than the fractions of biopolymers, building blocks, low molecular weight acids, and low molecular weight neutrals. Therefore, the aromatic content per unit of dissolved organic carbon was preferentially attenuated during pellet softening. The average removal efficiencies of the three estrogens and 12 selected pharmaceuticals during the softening process were 59 and 5.7%, respectively. However, there was a greater reduction of pharmaceuticals during NF.

Membrane fouling properties and different physical cleaning methods for forward osmosis (FO) and reverse osmosis (RO) laboratory-scale filtration systems were investigated. The membrane fouling, with respect to flux reduction, was lower in FO than in RO when testing an activated sludge effluent. Cross-flow velocity, air-scouring, osmotic backwashing and effect of a spacer were compared to determine the most effective cleaning method for FO. After a long period of fouling with activated sludge, the flux was fully recovered in a short period of osmotic backwashing compared with cleaning by changing cross-flow velocity and air-scouring. In this study, the osmotic backwashing was found to be the most efficient way to clean the FO membrane. The amount of RNA recovered from FO membranes was about twice that for RO membranes; biofouling could be more significant in FO than in RO. However, the membrane fouling in FO was lower than that in RO. The spacer increased the flux in FO with activated sludge liquor suspended solids of 2,500 mg/L, and there were effects of spacer on performance of FO–MBR membrane fouling. However, further studies are required to determine how the spacer geometry influences on the performance of the FO membrane.

Biofilm formation on biofilters can influence their hydraulic performance, thereby leading to head loss and an increase in energy use and costs for water utilities. The effects of a range of factors, including hydrogen peroxide and phosphate, on the performance of biological activated carbon (BAC) and biofilm formation were investigated using laboratory-scale columns. Head loss, total carbohydrates, and proteins were reduced in the nutrient-enhanced, oxidant-enhanced, and nutrient + oxidant-enhanced BAC filters. However, there were no changes in the removal of dissolved organic matter, trihalomethane formation potential, or selected trace organic contaminants. The biofilm formation on polyvinyl chloride and stainless steel coupons using the laboratory biofilm reactor system was lower when the effluent from a nutrient-enhanced column was used, which indicated that there was less biofilm formation in the distribution systems. This may have been because the effluent from the nutrient-enhanced column was more biologically stable. Therefore, enhanced biofiltration could be used not only to reduce head loss in biofilters, but also to delay biofilm formation in distribution systems.

Biofilm formation on membrane surfaces causes many operational problems such as a decrease in permeate flux and an increase in hydraulic resistance. In this study, the ability of bacteria to pass through microfiltration (MF) membranes and the growth potential of microfilterable bacteria were investigated in order to understand biofouling in MF-reverse osmosis (RO) integrated membrane systems. Growth of microfilterable bacteria in MF permeate was observed, indicating that not all MF membranes can guarantee the total rejection of bacteria. Changes in natural organic matter (NOM) characteristics and growth potential of bacteria during the treatment process are important factors in the occurrence of biofilm development in water treatment systems. Analysis of protein-like and humic-like substances in NOM of two successive RO stages revealed an increase in the concentrations of both biopolymers and humic substances of RO concentrates. Unexpectedly, the use of antiscalants was seen to enhance the growth of bacteria in the RO feed water in this study. Bacterial 16s rRNA pyrosequencing revealed that passing source water through the MF membranes dramatically changed bacterial community structure. The bacterial communities that passed through the MF steps primarily belonged to the family Comamonadaceae. However, several bacteria groups including Flavobacteriaceae, Sphingobacteriaceae and Sphingomonadaceae selectively composed the biofilm community formed on the RO membranes. Thus, understanding the selectivity and filterability of MF towards microorganisms involved in biofouling on RO membrane surfaces is crucial for the improvement of membrane-related operational processes.