Search

Co- and Ni-free disordered rocksalt cathodes utilize oxygen redox to increase the energy density of lithium-ion batteries, but it is challenging to achieve good cycle life at high voltages >4.5 V (versus Li/Li+). Here we report a family of Li-excess Mn-rich cathodes that integrates rocksalt- and polyanion-type structures. Following design rules for cation filling and ordering, we demonstrate the bulk incorporation of polyanion groups into the rocksalt lattice. This integration bridges the two primary families of lithium-ion battery cathodes—layered/spinel and phosphate oxides—dramatically enhancing the cycling stability of disordered rocksalt cathodes with 4.8 V upper cut-off voltage. The cathode exhibits high gravimetric energy densities above 1,100 Wh kg−1 and >70% retention over 100 cycles. This study opens up a broad compositional space for developing battery cathodes using earth-abundant elements such as Mn and Fe.

Recent research in multi-principal element alloys (MPEAs) has increasingly focused on the role of short-range order (SRO) on material performance. However, the mechanisms of SRO formation and its precise control remain elusive, limiting the progress of SRO engineering. Here, leveraging advanced additive manufacturing techniques that produce samples with a wide range of cooling rates (up to 107 K s-1) and an enhanced semi-quantitative electron microscopy method, we characterize SRO in three CoCrNi-based face-centered-cubic (FCC) MPEAs. Surprisingly, irrespective of the processing and thermal treatment history, all samples exhibit similar levels of SRO. Atomistic simulations reveal that during solidification, prevalent local chemical order arises in the liquid-solid interface (solidification front) even under the extreme cooling rate of 1011 K s-1. This phenomenon stems from the swift atomic diffusion in the supercooled liquid, which matches or even surpasses the rate of solidification. Therefore, SRO is an inherent characteristic of most FCC MPEAs, insensitive to variations in cooling rates and even annealing treatments typically available in experiments.

Ion implantation is widely used for doping semiconductors or electroceramic materials and probing material behaviors in extreme radiation environments. However, implanted ions can induce compressive stresses into the host material, which can induce plasticity and mesoscopic deformation. However, these phenomena have almost exclusively been observed in brittle ionic and/or covalently bonded materials. Here, we present transmission electron microscopy observations of unusual implantation-induced plasticity in two metallic alloys. First, Fe2+ ions induce dislocation plasticity below the implanted layer in a model Fe-P alloy. Next, He+ ions form pressurized cavities which activate the fcc-to-hcp strain-induced martensitic transformation in Alloy 625. In both cases, the plasticity can be explained by a combination of implanted ions being incorporated into the lattice and the creation of irradiation defects. These findings have significant implications for mechanical testing of ion-implanted layers, while also opening pathways for using ion implantation to tune stress distributions in metallic alloys.

Incipient ferroelectricity bridges traditional dielectrics and true ferroelectrics, enabling advanced electronic and memory devices. Firstly, we report incipient ferroelectricity in freestanding SrTiO3 nanomembranes integrated with monolayer MoS2 to create multifunctional devices, demonstrating stable ferroelectric order at low temperatures for cryogenic memory devices. Our observation includes ultra-fast polarization switching (~10 ns), low switching voltage (<6 V), over 10 years of nonvolatile retention, 100,000 endurance cycles, and 32 conductance states (5-bit memory) in SrTiO3-gated MoS2 transistors at 15 K and up to 100 K. Additionally, we exploit room-temperature weak polarization switching, a feature of incipient ferroelectricity, to construct a physical reservoir for pattern recognition. Our results showcase the potential of utilizing perovskite material properties enabled by advancements in freestanding film growth and heterogeneous integration, for diverse functional applications. Notably, the low 180 °C thermal budget for fabricating the 3D-SrTiO3/2D-MoS2 device stack enables the integration of diverse materials into silicon complementary metal-oxide-semiconductor technology, addressing challenges in compute-in-memory and neuromorphic applications. Sen et al. report the stacking of a perovskite incipient ferroelectric nanomembrane with atomically thin 2D material for a back-end-of-line compatible ferroelectric-like field effect transistors, functioning as a cryogenic memory at 15 K and as an inference engine at room temperature. [ABSTRACT FROM AUTHOR]

Electrocatalysis has received a great deal of interest in recent decades as a possible energy‐conversion technology involving a variety of chemical processes. External magnetic field application is a powerful method for improving electrocatalytic performance that is customizable and compatible with existing electrocatalytic devices. In addition, magnetic fields can assist in catalyst synthesis and act on the catalytic reaction process. This paper systematically reviews the most recent developments in magnetic field‐assisted electrocatalytic enhancement technology. The enhancement of electrocatalysis by a magnetic field is mainly represented in the three features listed below: The spin selectivity effect improves the activity of the catalyst in a magnetic field; furthermore, magnetic fields can improve mass transport and electron transport in catalytic processes (due to Lorentz forces, Kelvin forces, magnetohydrodynamic [MHD], and micro‐MHD); the magnetothermal effect may raise the reaction temperature and boost electrocatalytic activity. This review focuses on the rational design of catalytic systems incorporating the interaction between catalysts and magnetic fields, aiming to produce enhanced catalytic effects. The recommendations for further utilization of strategies for electrocatalysis and broader energy technologies for magnetic fields, as well as potential challenges for future research, are also discussed. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Materials Science & Engineering (1673-2812) is the property of Journal of Materials Science & Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)