Search

Periodically poled thin-film lithium niobate (TFLN) waveguides, which enable efficient quadratic nonlinear processes, serve as crucial foundation for classical and quantum signal processing with photonic integrated circuits. To expand their application scope, we provide, to our best knowledge, the first investigation of nonlinear conversion processes in periodically poled TFLN waveguides at cryogenic condition. Through systematic experimental characterization, we find that the periodically poled TFLN waveguide maintains consistent conversion efficiencies at both cryogenic and room temperatures for both classical second-harmonic generation and quantum photon-pair generation processes, demonstrating the significant potential of TFLN wavelength conversion devices for cryogenic applications. This breakthrough will foster future scalable quantum photonic systems and optical interfacing among different cryogenic platforms.

Optical vector analysis (OVA) is an enabling technology for comprehensively characterizing both amplitude and phase responses of optical devices or systems. Conventional OVA technologies are mostly based on discrete optoelectronic components, leading to unsatisfactory system sizes, complexity, and stability. They also encounter challenges in revealing the on-chip characteristics of integrated photonic devices, which are often overwhelmed by the substantial coupling loss and extra spectral response at chip facets. In this work, we demonstrate a miniaturized OVA system for integrated photonics devices based on broadband single sideband (SSB) modulators on a thin-film lithium niobate (LN) platform. The OVA could provide a direct probe of both amplitude and phase responses of photonic devices with kHz-level resolution and tens of terahertz measurement bandwidth. We perform in-situ characterizations of single and coupled microring resonators fabricated on the same chip as the OVA, unfolding their intrinsic loss and coupling states unambiguously. Furthermore, we achieve the direct measurement of collective phase dynamics and density of states of the Bloch modes in a synthetic frequency crystal, by in-situ OVA of a dynamically modulated microring resonator. Our in-situ OVA system provides a compact, high-precision, and broadband solution for characterizing future integrated photonic devices and circuits, with potential applications ranging from optical communications, biosensing, neuromorphic computing, to quantum information processing.

On-chip optical microresonators are essential building blocks in integrated optics. The ability to arbitrarily engineer their resonant frequencies is crucial for exploring novel physics in synthetic frequency dimensions and practical applications like nonlinear optical parametric processes and dispersion-engineered frequency comb generation. Photonic crystal ring (PhCR) resonators are a versatile tool for such arbitrary frequency engineering, by controllably creating mode splitting at selected resonances. To date, these PhCRs have mostly been demonstrated in isotropic photonic materials, while such engineering could be significantly more complicated in anisotropic platforms that often offer more fruitful optical properties. Here, we realize the spectral engineering of chip-scale optical microresonators in the anisotropic lithium niobate (LN) crystal by a gradient design that precisely compensates for variations in both refractive index and perturbation strength. We experimentally demonstrate controllable frequency splitting at single and multiple selected resonances in LN PhCR resonators with different sizes, while maintaining high Q-factors up to 1 million. Moreover, we experimentally construct a sharp boundary in the synthetic frequency dimension based on an actively modulated x-cut LN gradient-PhCR, opening up new paths toward the arbitrary control of electro-optic comb spectral shapes and exploration of novel physics in the frequency degree of freedom., Comment: 19 pages, 5 figures

Thin-film periodically poled lithium niobate (TF-PPLN) devices have recently gained prominence for efficient wavelength conversion processes in both classical and quantum applications. However, the patterning and poling of TF-PPLN devices today are mostly performed at chip scales, presenting a significant bottleneck for future large-scale nonlinear photonic systems that require the integration of multiple nonlinear components with consistent performance and low cost. Here, we take a pivotal step towards this goal by developing a wafer-scale TF-PPLN nonlinear photonic platform, leveraging ultraviolet stepper lithography and an automated poling process. To address the inhomogeneous broadening of the quasi-phase matching (QPM) spectrum induced by film thickness variations across the wafer, we propose and demonstrate segmented thermal optic tuning modules that can precisely adjust and align the QPM peak wavelengths in each section. \hl{Using the segmented micro-heaters, we show the successful realignment of inhomogeneously broadened multi-peak QPM spectra with up to 57$\%$ enhancement of conversion efficiency. We achieve a high normalized conversion efficiency of 3802$\%$W$^{-1}$cm$^{-2}$ in a 6 mm long PPLN waveguide, recovering 84$\%$ of the theoretically predicted efficiency in this device.} The advanced fabrication techniques and segmented tuning architectures presented herein pave the way for wafer-scale integration of complex functional nonlinear photonic circuits with applications in quantum information processing, precision sensing and metrology, and low-noise-figure optical signal amplification.

Integrated microwave photonics is an intriguing field that leverages integrated photonic technologies for the generation, transmission, and manipulation of microwave signals in chip-scale optical systems. In particular, ultrafast processing and computation of analog electronic signals in the optical domain with high fidelity and low latency could enable a variety of applications such as MWP filters, microwave signal processing, and image recognition. An ideal photonic platform for achieving these integrated MWP processing tasks shall simultaneously offer an efficient, linear and high-speed electro-optic modulation block to faithfully perform microwave-optic conversion at low power, and a low-loss functional photonic network that can be configured for a variety of signal processing tasks, as well as large-scale, low-cost manufacturability to monolithically integrate the two building blocks on the same chip. In this work, we demonstrate such an integrated MWP processing engine based on a thin-film lithium niobate platform capable of performing multi-purpose processing and computation tasks of analog signals up to 92 giga samples per second at CMOS-compatible voltages. We demonstrate high-speed analog computation, i.e., first- and second-order temporal integration and differentiation with computing accuracies up to 98.1 %, and deploy these functions to showcase three proof-of-concept applications, namely, ordinary differential equation solving, ultra-wideband signal generation and high-speed edge detection of images. We further leverage the image edge detector to enable a photonic-assisted image segmentation model that could effectively outline the boundaries of melanoma lesion in medical diagnostic images, achieving orders of magnitude faster processing speed and lower power consumption than conventional electronic processors.

Waveguide crossings are elementary passive components for signal routing in photonic integrated circuits. Here, we design and characterize two multimode interferometer (MMI)-based waveguide crossings to serve the various routing directions in the anisotropic x-cut thin-film lithium niobate (TFLN) platform. To address the large measurement uncertainties in traditional cut-back characterization methods, we propose and demonstrate a resonator-assisted approach that dramatically reduces the uncertainty of insertion loss measurement(< 0.021 dB) and the lower bound of crosstalk measurement (-60 dB) using only two devices. Based on this approach, we demonstrate and verify TFLN waveguide crossings with insertion losses of < 0.070 dB and crosstalk of < -50 dB along all three routing directions at 1550 nm. The low-loss and low-crosstalk waveguide crossings in this work, together with the simple and efficient characterization strategy, could provide important layout design flexibility for future large-scale classical and quantum TFLN photonic circuits., Comment: 10 pages, 4 figures

Integrated electro-optic (EO) frequency combs are essential components for future applications in optical communications, light detection and ranging, optical computation, sensing and spectroscopy. To date, broadband on-chip EO combs are typically generated in high-quality-factor micro-resonators, while the more straightforward and flexible non-resonant method, usually using single or cascaded EO phase modulators, often requires high driving power to realize a reasonably strong modulation index. Here, we show that the phase modulation efficiency of an integrated lithium niobate modulator could be dramatically enhanced by passing optical signals through the modulation electrodes for a total of 4 round trips, via multiple low-loss TE0/TE1 mode multiplexers and waveguide crossings, reducing electrical power consumption by more than one order of magnitude. Using devices fabricated from a wafer-scale stepper lithography process, we demonstrate a broadband optical frequency comb featuring 47 comb lines at a 25-GHz repetition rate, using a moderate RF driving power of 28 dBm (0.63 W). Leveraging the excellent tunability in repetition rate and operation wavelength, our power-efficient EO comb generator could serve as a compact low-cost solution for future high-speed data transmission, sensing and spectroscopy, as well as classical and quantum optical computation systems., Comment: 9 pages, 4 fingures

Integrated lithium niobate (LN) photonics is a promising platform for future chip-scale microwave photonics systems owing to its unique electro-optic properties, low optical loss and excellent scalability. A key enabler for such systems is a highly linear electro-optic modulator that could faithfully covert analog electrical signals into optical signals. In this work, we demonstrate a monolithic integrated LN modulator with an ultrahigh spurious-free dynamic range (SFDR) of 120.04 dB Hz4/5 at 1 GHz, using a ring-assisted Mach-Zehnder interferometer configuration. The excellent synergy between the intrinsically linear electro-optic response of LN and an optimized linearization strategy allows us to fully suppress the cubic terms of third-order intermodulation distortions (IMD3) without active feedback controls, leading to ~ 20 dB improvement over previous results in the thin-film LN platform. Our ultra-high-linearity LN modulators could become a core building block for future large-scale functional microwave photonic integrated circuits, by further integration with other high-performance components like low-loss delay lines, tunable filters and phase shifters available on the LN platform.

Lead halide perovskites (MAPbX3) have emerged as promising materials for photovoltaic and optoelectronic devices. However, their exceptional nonlinear properties have not been fully exploited in nanophotonics yet. Herein we fabricate MAPbX3 perovskite metasurfaces and explore their internal nonlinear processes. While both of third-order harmonic generation (THG) and three-photon luminescence are generated, the latter one is less affected by the material loss and has been significantly enhanced by a factor of 60. The corresponding simulation reveals that the improvement is caused by the resonant enhancement of incident laser in perovskite metasurface. Interestingly, such kind of resonance-enhanced three-photon luminescence holds true for metasurfaces with a small period number of 4, enabling new applications of perovskite metasurface in high-resolution nonlinear color nanoprinting and optical encoding. The encoded information "NANO" is visible only when the incident laser is on-resonance. The off-resonance pumping and the single-photon excitation just produce a uniform dark or photoluminescence background., Comment: 11 pages,5 figures

Integrated optical power splitter is one of the fundamental building blocks in photonic integrated circuits (PIC). Conventional multimode interferometer based power splitter is widely used as it has reasonable footprint and is easy to fabricate. However, it is challenging to realize arbitrary split ratio especially for multi-outputs. In this work, an ultra-compact power splitter with a QR code-like nanostructure is designed by a nonlinear fast search method (FSM). The highly functional structure is composed of a number of freely designed square pixels with the size of 120nm x 120nm which could be either dielectric or air. The lightwaves are scattered by a number of etched squares with optimized locations and the scattered waves superimpose at the outputs with the desired power ratio. We demonstrate 1x2 splitters with 1:1, 1:2, 1:3 split ratios and a 1x3 splitter with the ratio of 1:2:1. The footprint for all the devices is only 3.6umx3.6 um. Well-controlled split ratios are measured for all the cases. The measured transmission efficiencies of all the splitters are close to 80% over 30 nm wavelength range.

Lead halide perovskite based micro- and nano- lasers have been widely studied in past two years. Due to their long carrier diffusion length and high external quantum efficiency, lead halide perovskites have been considered to have bright future in optoelectronic devices, especially in the "green gap" wavelength region. However, the quality (Q) factors of perovskite lasers are unspectacular compared to conventional microdisk lasers. The record value of full width at half maximum (FWHM) at threshold is still around 0.22 nm. Herein we synthesized solution-processed, single-crystalline CH3NH3PbBr3 perovskite microrods and studied their lasing actions. In contrast to entirely pumping a microrod on substrate, we partially excited the microrods that were hanging in the air. Consequently, single-mode or few-mode laser emissions have been successfully obtained from the whispering-gallery like diamond modes, which are confined by total internal reflection within the transverse plane. Owning to the better light confinement and high crystal quality, the FWHM at threshold have been significantly improved. The smallest FWHM at threshold is around 0.1 nm, giving a Q factor over 5000., Comment: 7 pages, 4 figures

Solution-based perovskite nanoparticles have been intensively studied in past few years due to their applications in both photovoltaic and optoelectronic devices. Here, based on the common ground between the solution-based perovskite and random lasers, we have studied the mirrorless lasing actions in self-assembled perovskite nanoparticles. After the synthesis from solution, discrete lasing peaks have been observed from the optically pumped perovskites without any well-defined cavity boundaries. The obtained quality (Q) factors and thresholds of random lasers are around 500 and 60 uJ/cm2, respectively. Both values are comparable to the conventional perovskite microdisk lasers with polygon shaped cavity boundaries. From the corresponding studies on laser spectra and fluorescence microscope images, the lasing actions are considered as random lasers that are generated by strong multiple scattering in random gain media. In additional to conventional single-photon excitation, due to the strong nonlinear effects of perovskites, two-photon pumped random lasers have also been demonstrated for the first time. We believe this research will find its potential applications in low-cost coherent light sources and biomedical detection., Comment: 16 pages, 5 figures

Solution-processed lead halide perovskites have shown very bright future in both solar cells and microlasers. Very recently, the nonlinearity of perovskites started to attract considerable research attention. Second harmonic generation and two-photon absorption have been successfully demonstrated. However, the nonlinearity based perovskite devices such as micro- & nano- lasers are still absent. Here we demonstrate the two-photon pumped nanolasers from perovskite nanowires. The CH3NH3PbBr3 perovskite nanowires were synthesized with one-step solution self-assembly method and dispersed on glass substrate. Under the optical excitation at 800 nm, two-photon pumped lasing actions with periodic peaks have been successfully observed at around 546 nm. The obtained quality (Q) factors of two-photon pumped nanolasers are around 960, and the corresponding thresholds are about 674?J=cm2. Both the Q factors and thresholds are comparable to conventional whispering gallery modes in two-dimensional polygon microplates. Our researches are the first demonstrations of two-photon pumped nanolasers in perovskite nanowires. We believe our finding will significantly expand the application of perovskite in low-cost nonlinear optical devices such as optical limiting, optical switch, and biomedical imaging et al., Comment: 14 pages, 5 figures

Monochromaticity and directionality are two key characteristics of lasers. However, the combination of directional emission and single-mode operation is quite challenging, especially for the on-chip devices. Here we propose a microdisk laser with single-mode operation and directional emissions by exploiting the recent developments associated with parity-time (PT) symmetry. This is accomplished by introducing one-dimensional periodic gain and loss into a circular microdisk, which induces a coupling between whispering gallery modes with different radial numbers. The lowest threshold mode is selected at the positions with least initial wavelength difference. And the directional emissions are formed by the introduction of additional grating vectors by the periodic distribution of gain and loss regions. We believe this research will impact the practical applications of on-chip microdisk lasers., Comment: 18 pages, 4 figures

Light confinement and amplification in micro- & nano-fiber have been intensively studied and a number of applications have been developed. However, the typical micro- & anno- fibers are usually free-standing or positioned on a substrate with lower refractive index to ensure the light confinement and guiding mode. Here we numerically and experimentally demonstrate the possibility of confining light within a microfiber on a high refractive index substrate. In contrast to the strong leaky to the substrate, we found that the radiation loss was dependent on the radius of microfiber and the refractive index contrast. Consequently, quasi-guiding modes could be formed and the light could propagate and be amplified in such systems. By fabricating tapered silica fiber and dye-doped polymer fiber and placing them on sapphire substrates, the light propagation, amplification, and laser behaviors have been experimentally studied to verify the quasi-guiding modes in microfer with higher index substrate. We believe that our research will be essential for the applications of micro- and nano-fibers., Comment: 17 pages, 6 figures