Search

Thanks to the rapidly increasing time-domain facilities, we are entering a golden era of research on gamma-ray bursts (GRBs). In this Letter, we report our observations of GRB 240529A with the Burst Optical Observer and Transient Exploring System, the 1.5-meter telescope at Observatorio Sierra Nevada, the 2.5-meter Wide Field Survey Telescope of China, the Large Binocular Telescope, and the Telescopio Nazionale Galileo. The prompt emission of GRB 240529A shows two comparable energetic episodes separated by a quiescence time of roughly 400 s. Combining all available data on the GRB Coordinates Network, we reveal the simultaneous apparent X-ray plateau and optical re-brightening around $10^3-10^4$ s after the burst. Rather than the energy injection from the magnetar as widely invoked for similar GRBs, the multi-wavelength emissions could be better explained as two shocks launched from the central engine separately. The optical peak time and our numerical modeling suggest that the initial bulk Lorentz factor of the later shock is roughly 50, which indicates that the later jet should be accretion-driven and have a higher mass loading than a typical one. The quiescence time between the two prompt emission episodes may be caused by the transition between different accretion states of a central magnetar or black hole, or the fall-back accretion process. A sample of similar bursts with multiple emission episodes in the prompt phase and sufficient follow-up could help to probe the underlying physics of GRB central engines., Comment: Resubmitted to ApJL after addressing the referee's comments; comments are welcome

The hyperfine structure absorption lines of neutral hydrogen in spectra of high-redshift radio sources, known collectively as the 21-cm forest, have been demonstrated as a sensitive probe to the small-scale structures governed by the dark matter (DM) properties, as well as the thermal history of the intergalactic medium regulated by the first galaxies during the epoch of reionization. By statistically analyzing these spectral features, the one-dimensional (1D) power spectrum of the 21-cm forest can effectively break the parameter degeneracies and constrain the properties of both DM and the first galaxies. However, conventional parameter inference methods face challenges due to computationally expensive simulations for 21-cm forest and the non-Gaussian signal characteristics. To address these issues, we introduce generative normalizing flows for data augmentation and inference normalizing flows for parameters estimation. This approach efficiently estimates parameters from minimally simulated datasets with non-Gaussian signals. Using simulated data from the upcoming Square Kilometre Array (SKA), we demonstrate the ability of the deep learning-driven likelihood-free approach to generate accurate posterior distributions, providing a robust and efficient tool for probing DM and the cosmic heating history using the 1D power spectrum of 21-cm forest in the era of SKA. This methodology is adaptable for scientific analyses with other unevenly distributed data., Comment: 57 pages, 16 figures

Gravitational wave (GW) detection is of paramount importance in fundamental physics and GW astronomy, yet it presents formidable challenges. One significant challenge is the removal of noise transient artifacts known as ``glitches," which greatly impact the search and identification of GWs. Recent research has achieved remarkable results in data denoising, often using effective modeling methods to remove glitches. However, for glitches from uncertain or unknown sources, current methods cannot completely eliminate them from the GW signal. In this work, we leverage the inherent robustness of machine learning to obtain reliable posterior parameter distributions directly from GW data contaminated by glitches. Our network model provides reasonable and rapid parameter inference even in the presence of glitches, without needing to remove them. We also investigate various factors affecting the rationality of parameter inference in our normalizing flow network, including glitch and GW parameters. The results demonstrate that the normalizing flow can reasonably infer the source parameters of GWs even with unknown contamination. We find that the nature of the glitch itself is the only factor that can affect the rationality of the inferred results. With improvements to our model, we anticipate accelerating the localization of electromagnetic counterparts and providing priors for more accurate deglitching, thereby speeding up subsequent data processing procedures., Comment: 13 pages, 9 figures

ENN Science and Technology Development Co., Ltd. (ENN) is committed to generating fusion energy in an environmentally friendly and cost-effective manner, which requires abundant aneutronic fuel. Proton-boron ( p-$^{11}$B or p-B) fusion is considered an ideal choice for this purpose. Recent studies have suggested that p-B fusion, although challenging, is feasible based on new cross-section data, provided that a hot ion mode and high wall reflection can be achieved to reduce electron radiation loss. The high beta and good confinement of the spherical torus (ST) make it an ideal candidate for p-B fusion. By utilizing the new spherical torus energy confinement scaling law, a reactor with a major radius $R_0=4$ m, central magnetic field $B_0=6$ T, central temperature $T_{i0}=150$ keV, plasma current $I_p=30$ MA, and hot ion mode $T_i/T_e=4$ can yield p-B fusion with $Q>10$. A roadmap for p-B fusion has been developed, with the next-generation device named EHL-2. EHL stands for ENN He-Long, which literally means ``peaceful Chinese Loong". The main target parameters include $R_0\simeq1.05$ m, $A\simeq1.85$, $B_0\simeq3$ T, $T_{i0}\simeq30$ keV, $I_p\simeq3$ MA, and $T_i/T_e\geq2$. The existing ST device EXL-50 was simultaneously upgraded to provide experimental support for the new roadmap, involving the installation and upgrading of the central solenoid, vacuum chamber, and magnetic systems. The construction of the upgraded ST fusion device, EXL-50U, was completed at the end of 2023, and it achieved its first plasma in January 2024. The construction of EHL-2 is estimated to be completed by 2026., Comment: 16 pages, 8 figures

Glitches represent a category of non-Gaussian and transient noise that frequently intersects with gravitational wave (GW) signals, exerting a notable impact on the processing of GW data. The inference of GW parameters, crucial for GW astronomy research, is particularly susceptible to such interference. In this study, we pioneer the utilization of temporal and time-spectral fusion normalizing flow for likelihood-free inference of GW parameters, seamlessly integrating the high temporal resolution of the time domain with the frequency separation characteristics of both time and frequency domains. Remarkably, our findings indicate that the accuracy of this inference method is comparable to traditional non-glitch sampling techniques. Furthermore, our approach exhibits greater efficiency, boasting processing times on the order of milliseconds. In conclusion, the application of normalizing flow emerges as pivotal in handling GW signals affected by transient noises, offering a promising avenue for enhancing the field of GW astronomy research., Comment: 13 pages, 10 figures

Particle-in-cell simulations have unveiled that shock-accelerated electrons do not follow a pure power-law distribution, but have an additional low-energy "thermal" part, which owns a considerable portion of the total energy of electrons. Investigating the effects of these thermal electrons on gamma-ray burst (GRB) afterglows may provide valuable insights into the particle acceleration mechanisms. We solve the continuity equation of electrons in the energy space, from which multi-wavelength afterglows are derived by incorporating processes including synchrotron radiation, synchrotron self-absorption, synchrotron self-Compton scattering, and gamma-gamma annihilation. First, there is an underlying positive correlation between temporal and spectral indices due to the cooling of electrons. Moreover, thermal electrons would result in the simultaneous non-monotonic variation in both spectral and temporal indices at multi-wavelength, which could be individually recorded by the 2.5-meter Wide Field Survey Telescope and Vera Rubin Observatory Legacy Survey of Space and Time (LSST). The thermal electrons could also be diagnosed from afterglow spectra by synergy observation in the optical (with LSST) and X-ray bands (with the Microchannel X-ray Telescope on board the Space Variable Objects Monitor). Finally, we use Monte Carlo simulations to obtain the distribution of peak flux ratio ($R_{\rm X}$) between soft and hard X-rays, and of the time delay ($\Delta t$) between peak times of soft X-ray and optical light curves. The thermal electrons significantly raise the upper limits of both $R_{\rm X}$ and $\Delta t$. Thus the distribution of GRB afterglows with thermal electrons is more dispersive in the $R_{\rm X} - \Delta t$ plane., Comment: 19 pages, 18 figures, accepted by the Astrophysical Journal

Recent developments in deep learning techniques have offered an alternative and complementary approach to traditional matched filtering methods for the identification of gravitational wave (GW) signals. The rapid and accurate identification of GW signals is crucial for the progress of GW physics and multi-messenger astronomy, particularly in light of the upcoming fourth and fifth observing runs of LIGO-Virgo-KAGRA. In this work, we use the 2D U-Net algorithm to identify the time-frequency domain GW signals from stellar-mass binary black hole (BBH) mergers. We simulate BBH mergers with component masses from 5 to 80 $M_{\odot}$ and account for the LIGO detector noise. We find that the GW events in the first and second observation runs could all be clearly and rapidly identified. For the third observing run, about $80\%$ GW events could be identified. In particular, GW190814, currently unknown, is a special case that can be identified by the network, while other binary neutron star mergers and neutron star-black hole mergers can not be identified. Compared to the traditional convolutional neural network, the U-Net algorithm can output the time-frequency domain signal images rather than probabilities, providing a more intuitive investigation. Moreover, some of the results through U-Net can provide preliminary inference on the chirp mass information. In conclusion, the U-Net algorithm can rapidly identify the time-frequency domain GW signals from BBH mergers and potentially be helpful for future parameter inferences., Comment: 37 pages, 14 figures

We propose to develop a wide-field and ultra-high-precision photometric survey mission, temporarily named "Earth 2.0 (ET)". This mission is designed to measure, for the first time, the occurrence rate and the orbital distributions of Earth-sized planets. ET consists of seven 30cm telescopes, to be launched to the Earth-Sun's L2 point. Six of these are transit telescopes with a field of view of 500 square degrees. Staring in the direction that encompasses the original Kepler field for four continuous years, this monitoring will return tens of thousands of transiting planets, including the elusive Earth twins orbiting solar-type stars. The seventh telescope is a 30cm microlensing telescope that will monitor an area of 4 square degrees toward the galactic bulge. This, combined with simultaneous ground-based KMTNet observations, will measure masses for hundreds of long-period and free-floating planets. Together, the transit and the microlensing telescopes will revolutionize our understandings of terrestrial planets across a large swath of orbital distances and free space. In addition, the survey data will also facilitate studies in the fields of asteroseismology, Galactic archeology, time-domain sciences, and black holes in binaries., Comment: 116 pages,79 figures

By simulating the X-ray paths and the Chapman Model of a flat multi-channel plate and a curved multi-channel plate in the MATLAB, the field of view, local reflection efficiency, spherical aberration, point-spread function, collection efficiency of incident X-ray and peak-to-background ratio on the focal plane of the two devices were compared. At the same time, the advantages and disadvantages of the flat multi-channel plate and the curved multi-channel plate were compared.

The x-ray polycapillary lens is an optical device with good optic performance. Similar to the traditional X-ray polycapillary lens, square polycapillary slice lens was regulated on X-ray based on the full reflection principle of X-ray in the capillaries surfaces. According to its geometrical structure model and the X-ray tracing principle, a set of X-ray transmission procedures was established. A complete square polycapillary slice lens with quadratic curve was produced and the optical performance was tested

Higher neutron current densities can provide convenience for neutron experiments. Using neutron optical focusing elements, large flux beams transported to sample can be achieved. As one kind of focusing elements, polycapillary lens is very suitable for neutron absorption experiments such as PGAA and NDP technology. At present, a Neutron Physics and Application Spectrometer was in construction in CSNS, which is the first pulsed neutron source in China. To provide some suggestions and ideas for the following design of enhanced PGAA or NDP instrument with polycapillary lens in CSNS, a first neutron focusing experiment using polycapillary lens in CSNS was conducted. For 0.5-12.6 polychromatic beam, a focal spot with FWHM of 800 was obtained. As the value of wavelength increased, the beam size, transmission efficiency and gain increased. For cold neutron, the gain maintained in a level of 7., Comment: 12 pages, 13 figures, 12 references

It has been widely recognized that gamma-ray burst (GRB) afterglows arise from interactions between GRB outflow and circumburst medium, while their evolution follows the behaviors of relativistic shock waves. Assuming the distribution of circumburst medium follows a general power-law form, that is, $n = A_{\ast} R^{-k}$, where $R$ denotes the distance from the burst, it is obvious that the value of density-distribution index $k$ can affect the behaviors of the afterglow. In this paper, we analyze the temporal and spectral behaviors of GRB radio afterglows with arbitrary $k$-values. In the radio band, a standard GRB afterglow produced by forward shock exhibits a late-time flux peak, and the relative peak fluxes as well as peak times at different frequencies show dependencies on $k$. Thus with multi-band radio peak observations, one can determine the density profile of circumburst medium by comparing the relations between peak flux/time and frequency at each observing band. Also, the effects of trans-relativistic shock waves, as well as jets in afterglows are discussed. By analyzing 31 long and 1 short GRBs with multi-band data of radio afterglows, we find that nearly half of them can be explained with uniform interstellar medium ($k=0$), $\sim 1/5$ can be constrained to exhibiting stellar wind environment ($k=2$), while less than $\sim 1/3$ samples show $0< k< 2$., Comment: 26 pages, 9 figures

Titanium nitride (TiN) is a paradigm of refractory transition metal nitrides with great potential in vast applications. Generally, the plasmonic performance of TiN can be tuned by oxidation, which was thought to be only temperature-, oxygen partial pressure-, and time-dependent. Regarding the role of crystallographic orientation in the oxidation and resultant optical properties of TiN films, little is known thus far. Here we reveal that both the oxidation resistance behavior and the plasmonic performance of epitaxial TiN films follow the order of (001) < (110) < (111). The effects of crystallographic orientation on the lattice constants, optical properties, and oxidation levels of epitaxial TiN films have been systematically studied by combined high-resolution X-ray diffraction, spectroscopic ellipsometry, X-ray absorption spectroscopy, and X-ray photoemission spectroscopy. To further understand the role of crystallographic orientation in the initial oxidation process of TiN films, density-functional-theory calculations are carried out, indicating the energy cost of oxidation is (001) < (110) < (111), consistent with the experiments. The superior endurance of the (111) orientation against mild oxidation can largely alleviate the previously stringent technical requirements for the growth of TiN films with high plasmonic performance. The crystallographic orientation can also offer an effective controlling parameter to design TiN-based plasmonic devices with desired peculiarity, e.g., superior chemical stability against mild oxidation or large optical tunability upon oxidation., Comment: 23 pages, 5 figures