Search

We investigated the role of extracellular metabolites released during mutualistic interactions in co-cultures of a microalga, Tetradesmus obliquus IS2 or Coelastrella sp. IS3, and a bacterium, Variovorax paradoxus IS1, grown with varying levels of NO3–N and NH4–N. Both NO3–N and NH4–N were added to modified Bold’s basal medium at 16:0, 12:4, 8:8; 4:12 and 0:16 molar ratios by keeping a final N:P ratio of 16:1. Monocultures of microalgae grown with nitrate alone showed enhanced growth (> twofold) than ammonium, while the bacterial strain cultured with ammonium alone exhibited a > 1.3-fold increase in growth than nitrate. Co-culturing performed higher growth at combined nitrate and ammonium supply as compared to the single cultures. The same ratio of nitrate and ammonium resulted in superior growth of microalgae (> 1.7-fold) and the bacterium (> 4.1-fold) as compared to the monocultures. Uptake of NO3–N, NH4–N and PO4–P by monocultures or co-cultures depended on the ratio of two inorganic nitrogen sources used. The composition of organic acids, amino acids and simple sugars in exudates from monocultures varied with the ratios of nitrate and ammonium in the medium. Thus, the present novel study demonstrates that the release of exudates is affected both qualitatively and quantitatively during mutualistic interactions in microalgal‒bacterial co-cultures under the impact of inorganic nitrogen sources. Our results suggest that the variables such as inorganic nitrogen sources and extracellular metabolites released need to be considered while using co-cultures for effective bioremediation of wastewaters.

Pyroligneous acid (PA) is a highly oxygenated organic condensate obtained by cooling the gases generated from the pyrolysis process. PA has been used in agriculture for several years with multiple beneficial effects, including plant health and yields, pest resilience, and seed germination. It is generally applied to agricultural soils in the dilution of 1:1000 to 1:100, corresponding to 0.1-1% PA concentration. In this study, the cyto-genotoxic potential of PA to

The importance of several factors that drive the symbiotic interactions between bacteria and microalgae in consortia has been well realised. However, the implication of extracellular polymeric substances (EPS) released by the partners remains unclear. Therefore, the present study focused on the influence of EPS in developing consortia of a bacterium, Variovorax paradoxus IS1, with a microalga, Tetradesmus obliquus IS2 or Coelastrella sp. IS3, all isolated from poultry slaughterhouse wastewater. The bacterium increased the specific growth rates of microalgal species significantly in the consortia by enhancing the uptake of nitrate (88‒99%) and phosphate (92‒95%) besides accumulating higher amounts of carbohydrates and proteins. The EPS obtained from exudates, collected from the bacterial or microalgal cultures, contained numerous phytohormones, vitamins, polysaccharides and amino acids that are likely involved in interspecies interactions. The addition of EPS obtained from V. paradoxus IS1 to the culture medium doubled the growth of both the microalgal strains. The EPS collected from T. obliquus IS2 significantly increased the growth of V. paradoxus IS1, but there was no apparent change in bacterial growth when it was cultured in the presence of EPS from Coelastrella sp. IS3. These observations indicate that the interaction between V. paradoxus IS1 and T. obliquus IS2 was mutualism, while commensalism was the interaction between the bacterial strain and Coelastrella sp. IS3. Our present findings thus, for the first time, unveil the EPS-induced symbiotic interactions among the partners involved in bacterial‒microalgal consortia.

Sustainable resource recovery is the key to manage the overburden of various waste entities of mining practices. The present study demonstrates for the first time a novel approach for iron recovery and biodiesel yield from two acid-adapted microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, grown in synthetic acid mine drainage (SAMD). Virtually, there was no difference in the growth of the strain MAS3 both in Bold's basal medium (control) and SAMD. Using the IC50 level (200 mg L-1) and a lower concentration (50 mg L-1) of iron in SAMD, the cell granularity, exopolysaccharide (EPS) secretion, iron recovery, and biodiesel were assessed in both the strains. Both cell granularity and accumulation of EPS were significantly altered under metal stress in SAMD, resulting in an increase in total accumulation of iron. Growth of the microalgal strains in SAMD yielded 12-20% biodiesel, with no traces of heavy metals, from the biomass. The entire amount of iron, accumulated intracellularly, was recovered in the residual biomass. Our results on the ability of the acid-adapted microalgal strains in iron recovery and yield of biodiesel when grown in SAMD indicate that they could be the potential candidates for use in bioremediation of extreme habitats like AMD.

The soil microbiota plays a major role in maintaining the nutrient balance, carbon sink, and soil health. Numerous studies reported on the function of microbiota such as plant growth-promoting bacteria and fungi in soil. Although microalgae and cyanobacteria are ubiquitous in soil, very less attention has been paid on the potential of these microorganisms. The indiscriminate use of various chemicals to enhance agricultural productivity led to serious consequences like structure instability, accumulation of toxic contaminants, etc., leading to an ecological imbalance between soil, plant, and microbiota. However, the significant role of microalgae and cyanobacteria in crop productivity and other potential options has been so far undermined. The intent of the present critical review is to highlight the significance of this unique group of microorganisms in terms of maintaining soil fertility and soil health. Beneficial soil ecological applications of these two groups in enhancing plant growth, establishing interrelationships among other microbes, and detoxifying chemical agents such as insecticides, herbicides, etc. through mutualistic cooperation by synthesizing enzymes and phytohormones are presented. Since recombinant technology involving genomic integration favors the development of useful traits in microalgae and cyanobacteria for their potential application in improvement of soil fertility and health, the merits and demerits of various such advanced methodologies associated in harnessing the biotechnological potential of these photosynthetic microorganisms for sustainable agriculture were also discussed.

Rivers are the mostly vulnerable water bodies due to carrying off and assimilating pollutants from both point sources and non-point sources. This study deals with the metal pollution in sediments of the Cooum River, Chennai, India. Eleven sampling stations were selected along the 18 km stretch of the Cooum River, which lies in the urban part of the Chennai City and the concentration of metals such as As, Zn, Mn, Ni, Co, Cr, Cu, Pb, Cd, and Hg in the sediments were determined. The study reveals a progressive increase in the concentration of metals in the downstream due to increase in domestic and industrial drainage (out falls) into the river. Spatial distribution of sediment particle size indicated the dominance of smaller particles ranging from 425 to 75 µm. The concentration of metals in the Cooum River sediments was in the following order: As > Zn > Cr > Cu > Pb > Cd > Hg. Significant positive correlations exist between Cd and Zn, Cu and Pb, Cd and Hg, and Cr and Hg. Ecological risk indices denote predominant levels (> 70%) of cadmium throughout the sampling points as indicated from contamination factor. Potential ecological risk assessment specified the alarming levels of cadmium and mercury above the standard limits in the sediments assessed. Based on the observations, it is evident that the Cooum River is highly polluted and it becomes essential that the urban effluents should not be overlooked before their discharge into the river.

Two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, originally isolated from non-acidophilic environment, were tested for their ability to withstand higher concentrations of an invasive heavy metal, cadmium (Cd), at an acidic pH of 3.5 and produce biomass rich in biodiesel. The growth analysis, in terms of chlorophyll, revealed that strain MAS1 was tolerant even to 20 mg L−1 of Cd while strain MAS3 could withstand only up to 5 mg L−1. When grown in the presence of 2 mg L−1, a concentration which is 400-fold higher than that usually occurs in the environment, the microalgal strains accumulated >58% of Cd from culture medium at pH 3.5. FTIR analysis of Cd-laden biomass indicated production of significant amounts of biodiesel rich in fatty acid esters. This is the first study that demonstrates the capability of acid-tolerant microalgae to grow well and remove Cd at acidic pH.

Metals in traces are vital for microalgae but their occurrence at high concentrations in habitats is a serious ecological concern. We investigated the potential of two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, isolated from neutral environments, for simultaneous removal of heavy metals such as copper (Cu), iron (Fe), manganese (Mn) and zinc (Zn), and production of biodiesel when grown at pH 3.5. Excepting Cu, the selected metals at concentrations of 10–20 mg L−1 supported good growth of both the strains. Cellular analysis for metal removal revealed the predominance of intracellular mechanism in both the strains resulting in 40–80 and 40–60% removal of Fe and Mn, respectively. In-situ transesterification of biomass indicated enhanced biodiesel yield with increasing concentrations of metals suggesting that both these acid-tolerant microalgae may be the suitable candidates for simultaneous remediation, and sustainable biomass and biodiesel production in environments like metal-rich acid mine drainages.

Tanning process generates a significant amount of waste matter both in solid and liquid form. The present study depicts an innovative approach to reduce pollutant and recover calcite (CaCO3) from the liming process waste by carbon dioxide (CO2) fixation. Response surface optimization was applied to study the effect of time and lime concentration (2.5%–7.5% w/w) in synthetic wastewater using CO2. The acquired optimized condition was verified on real solid waste produced viz., lime sludge product (LSP) and relime sludge product (RSP). The results indicated rover >95% of calcite (CaCO3) recovery from synthetic lime wastewater followed by 85–90% from LSP & RSP under optimized conditions. Subsequent reduction of total dissolved solids and suspended solids in the range of 78–82% and 76–77% in LSP & RSP was also observed. Mineralogical analysis using X-ray diffraction technique along with standards (lime, calcite, lime & calcite mix) confirms the production of calcite. Statistical analysis showed a P value 0.95) among the process conditions and variables using response surface methodology and was further validated using artificial neural networking. This study demonstrates a sustainable and cleaner way of resource recovery from waste through CO2 fixation from lime solid waste (sludge).

Mutual interactions in co-cultures of microalgae and bacteria are well known for establishing consortia and nutrient uptake in aquatic habitats, but the phenotypic changes in terms of morphological, physiological, and biochemical attributes that drive these interactions have not been clearly understood. In this novel study, we demonstrated the phenotypic response in a co-culture involving a microalga, Tetradesmus obliquus IS2, and a bacterium, Variovorax paradoxus IS1, grown with varying concentrations of two inorganic nitrogen sources. Modified Bold's basal medium was supplemented with five ratios (%) of NO3-N:NH4-N (100:0, 75:25, 50:50, 25:75, and 0:100), and by maintaining N:P Redfield ratio of 16:1. The observed morphological changes in microalga included an increase in granularity and a broad range of cell sizes under the influence of increased ammonium levels. Co-culturing in presence of NO3-N alone or combination with NH4-N up to equimolar concentrations resulted in complete nitrogen uptake, increased growth in both the microbial strains, and enhanced accumulation of carbohydrates, proteins, and lipids. Total chlorophyll content in microalga was also significantly higher when it was grown as a co-culture with NO3-N and NH4-N up to a ratio of 50:50. Significant upregulation in the synthesis of amino acids and sugars and downregulation of organic acids were evident with higher ammonium uptake in the co-culture, indicating the regulation of carbon and nitrogen assimilation pathways and energy synthesis. Our data suggest that the co-culture of strains IS1 and IS2 could be exploited for effluent treatment by considering the concentrations of inorganic sources, particularly ammonium, in the wastewaters.

Physiological changes that drive the microalgal–bacterial consortia are poorly understood so far. In the present novel study, we initially assessed five morphologically distinct microalgae for their ability in establishing consortia in Bold's basal medium with a bacterial strain, Variovorax paradoxus IS1, all isolated from wastewaters. Tetradesmus obliquus IS2 and Coelastrella sp. IS3 were further selected for gaining insights into physiological changes, including those of metabolomes in consortia involving V. paradoxus IS1. The distinct parameters investigated were pigments (chlorophyll a, b, and carotenoids), reactive oxygen species (ROS), lipids and metabolites that are implicated in major metabolic pathways. There was a significant increase (>1.2-fold) in pigments, viz., chlorophyll a, b and carotenoids, decrease in ROS and an enhanced lipid yield (>2-fold) in consortia than in individual cultures. In addition, the differential regulation of cellular metabolites such as sugars, amino acids, organic acids and phytohormones was distinct among the two microalgal–bacterial consortia. Our results thus indicate that the selected microalgal strains, T. obliquus IS2 and Coelastrella sp. IS3, developed efficient consortia with V. paradoxus IS1 by effecting the required physiological changes, including metabolomics. Such microalgal–bacterial consortia could largely be used in wastewater treatment and for production of value-added metabolites.

Phenotypic plasticity or genetic adaptation in an organism provides phenotypic changes when exposed to the extreme environmental conditions. The resultant physiological and metabolic changes greatly enhance the organism's potential for its survival in such harsh environments. In the present novel approach, we tested the hypothesis whether acid-adapted microalgae, initially isolated from non-acidophilic environments, can survive and grow in acid-mine-drainage (AMD) samples. Two acid-adapted microalgal strains, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, were tested individually or in combination (co-culture) for phenotypic changes during their growth in samples collected from AMD. The acid-adapted microalgae in AMD exhibited a two-fold increase in growth when compared with those grown at pH 3.5 in BBM up to 48 h and then declined. Furthermore, oxidative stress triggered several alterations such as increased cell size, granularity, and enhanced lipid accumulation in AMD-grown microalgae. Especially, the apparent limitation of phosphate in AMD inhibited the uptake of copper and iron in the cultures. Interestingly, growth of the acid-adapted microalgae in AMD downregulated amino acid metabolic pathways as a survival mechanism. This study demonstrates for the first time that acid-adapted microalgae can survive under extreme environmental conditions as exist in AMD by effecting significant phenotypic changes.

Biomass-derived adsorbents have been intensively studied due to their competence in reducing pollutants with conventional methods. Flowers are used as source in medicine, cosmetics and even as adsorbents for pollutant abatement. In this study, the microparticles from Chrysanthemum indicum were used as adsorbent for reducing the Congo red dye concentration from synthetic solution. Batch trials were evaluated to understand the influence of factors and optimization was carried out using central composite design. Maximum reduction (84.1%) achieved under the optimized settings of pH (1.0), adsorbent dose (300 ppm), stirring speed (150 rpm), and contact time (75 min) at initial dye concentration (150 ppm at 30 °C). Microparticle size ensured with surface morphology of the adsorbent using electron microscopy and functional groups was studied using infrared spectroscopy techniques, respectively. Regression coefficient (R 2) value was obtained as 0.956 which indicates that the predicted values were in good agreement with their corresponding experimental values for the Congo red dye adsorption. Based on the investigation, it is inferred that the Chrysanthemum indicum flower has the potential for Congo red dye reduction from aqueous solution.

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.

In this study, batch experiments were carried out to study the adsorption of Malachite green dye from aqueous solution by Mangifera indica (mango) seed kernel powder. The mango seed kernel powder was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Effect of various parameters including pH, contact time, adsorbent dosage, initial dye concentration and temperature on adsorption capacity of the adsorbent was observed and the optimized condition for maximum dye removal was identified. Maximum percentage removal of 96% was achieved with an adsorption capacity of 22.8 mg/g at pH 6 with an initial concentration of 100 mg/l. The equilibrium data were examined to fit the Langmuir and Freundlich isotherm models. Thermodynamic parameters for the adsorption process were also calculated.

The excessive generation and discharge of wastewaters have been serious concerns worldwide in the recent past. From an environmental friendly perspective, bacteria, cyanobacteria and microalgae, and the consortia have been largely considered for biological treatment of wastewaters. For efficient use of bacteria‒cyanobacteria/microalgae consortia in wastewater treatment, detailed knowledge on their structure, behavior and interaction is essential. In this direction, specific analytical tools and techniques play a significant role in studying these consortia. This review presents a critical perspective on physical, biochemical and molecular techniques such as microscopy, flow cytometry with cell sorting, nanoSIMS and omics approaches used for systematic investigations of the structure and function, particularly nutrient removal potential of bacteria‒cyanobacteria/microalgae consortia. In particular, the use of specific molecular techniques of genomics, transcriptomics, proteomics metabolomics and genetic engineering to develop more stable consortia of bacteria and cyanobacteria/microalgae with their improved biotechnological capabilities in wastewater treatment has been highlighted.

The aim of the study was focused on extraction of fleshing oil from limed fleshings with different neutralization process by ammonium chloride (NH4Cl) and hydrochloric acid (HCl) followed by solvent extraction. The production of fatty acid methyl esters (FAMEs) from limed fleshing oil by two stage process has also been investigated. The central composite design (CCD) was used to study the effect of process variables viz., amount of flesh, particle size and time of fleshing oil extraction. The maximum yield of fleshing oil from limed fleshings post neutralization by ammonium chloride (NH4Cl) and hydrochloric acid (HCl) was 26.32g and 12.43g obtained at 200g of flesh, with a particle size of 3.90mm in the time period of 2h. Gas chromatography analysis reveals that the biodiesel (FAME) obtained from limed fleshings is rich in oleic and palmitic acids with weight percentages 46.6 and 32.2 respectively. The resulting biodiesel was characterized for its physio-chemical properties of diesel as per international standards (EN14214).

The overwhelming response towards algal biodiesel production has been well-recognized recently as a sustainable alternative to conventional fuels. Most microalgae cannot grow well at acidic pH. The present study, therefore, investigated whether non-acidophilic microalgae Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3 can be acclimated to extreme-acidic pH for sustainable production of biomass and biodiesel. Growth analysis indicated that both the microalgal strains possessed a passive uptake of CO2 at pH 3.0 with biomass production of 0.25 g dry wt. L−1 in Desmodemus sp. and 0.45 g dry wt. L−1 in Heterochlorella sp.. Flow-cytometry analysis for reactive oxygen species, membrane permeability and neutral-lipids revealed the capabilities of both strains to adapt to the stress imposed by acidic pH. Lipid production was doubled in both the strains when grown at pH 3.0. In-situ transesterification of biomass resulted in 13–15% FAME yield in the selected microalgae, indicating their great potential in biofuel production.

In this study, the effect of different modes of cultivation viz., photoautotrophic (AT), heterotrophic (HT) and photomixotrophic (MT), on the growth and biochemical responses of Chlorella sp. isolated from local ponds. The performance of microalgal growth was quantified using nonlinear growth models such as Gompertz, logistic, Baranyi-Roberts, Morgan under different cultivation conditions. The results revealed that microalgae could grow better in MT than in other cultivation modes with a major increase in biochemical responses for carbohydrates, which showed higher accumulation under HT. The maximum biomass concentration was 1.24 g L-1 (MT), 1.16 g L-1 (HT), 0.76 g L-1 (AT) with maximum specific growth rates of 0.0083 h-1 (HT), 0.0078 h-1 (MT) and 0.0055 h-1 (AT) respectively. The biomass concentration was higher in the order of MT>HT>AT for which MT yielded 8.8 fold higher biomass, compared with the initial biomass concentration, at the end of experiments (16 days). Concomitant increases in biochemical responses were observed in the three cultivation conditions. Protein and lipid accumulation in the MT mode was higher (1.2 fold) compared with the initial protein yield as well as the other cultivation modes. However, the carbohydrate yield was higher (1.12 fold) in the heterotrophic mode than in other cultivation conditions.

Development of clean, sustainable and renewable energy technologies is the key to overcome the problems such as greenhouse gas emissions and energy crises. Currently, cultivating microalgae has gained large momentum among researchers due to their photosynthetic rate of CO2 fixation and its versatile nature to grow in various wastewater systems. In addition, various options of exploring biofuels such as biodiesel, bio hydrogen and bioethanol etc., has made this technology most promising and viable one. However, the efficiency of wastewater treatment differs species to species. In this review paper the use of microalgae group Chlorophyta for various energy and environmental applications have been discussed. Further, the aspects such as applicability of Chlorophyta in industrial wastewater treatment, domestic wastewater treatment and nutrient removal are presented. In addition, the harvesting techniques, cultivation methods and other commercial applications have been discussed widely.

The aim of this study was to identify the potential for cultivation of Chlorella pyrenoidosa and Scenedesmus abundans in raw and autoclaved domestic wastewater (sewage) for nutrient removal, in a batch process. The growth was observed by measuring chlorophyll content. The inoculum size of 10% and 20% was used and the growth of microalgae and nutrient removal was monitored on daily basis. The maximum removal of ammonium nitrogen, phosphate and nitrates by Chlorella pyrenoidosa in raw samples was observed as 99%, 96% and 80%, respectively, whereas the maximum removal of ammonium nitrogen, phosphate and nitrates by Scenedesmus abundans in raw samples was observed as 98%, 95% and 83%, respectively. The maximum chlorophyll content was observed as 11.33 mg/l and 7.23 mg/l for C. pyrenoidosa and S. abundans, respectively, in raw samples. The experimental results reveal that both the microalgae are capable to grow and remove the nutrients from domestic wastewater.

Microalgae and bacteria offer a huge potential in delving interest to study and explore various mechanisms under extreme environments. Acid mine drainage (AMD) is one such environment which is extremely acidic containing copious amounts of heavy metals and poses a major threat to the ecosystem. Despite its extreme conditions, AMD is the habitat for several microbes and their activities. The use of various chemicals in prevention of AMD formation and conventional treatment in a larger scale is not feasible under different geological conditions. It implies that microbe-mediated approach is a viable and sustainable alternative technology for AMD remediation. Microalgae in biofilms play a pivotal role in such bioremediation as they maintain mutualism with heterotrophic bacteria. Synergistic approach of using microalgae–bacteria biofilms provides supportive metabolites from algal biomass for growth of bacteria and mediates remediation of AMD. However, by virtue of their physiology and capabilities of metal removal, non-acidophilic microalgae can be acclimated for use in AMD remediation. A combination of selective acidophilic and non-acidophilic microalgae together with bacteria, all in the form of biofilms, may be very effective for bioremediation of metal-contaminated waters. The present review critically examines the nature of mutualistic interactions established between microalgae and bacteria in biofilms and their role in removal of metals from AMDs, and consequent biomass production for the yield of biofuel. Integration of microalgal–bacterial consortia in fuel cells would be an attractive emerging approach of microbial biotechnology for AMD remediation.

Microalgae are product of sustainable development owing to its ability to treat variety of wastewater effluents and thus produced biomass can serve as value added product for various commercial applications. This paper deals with the cultivation of microalgae species namely Chlorella pyrenoidosa and Scenedesmus abundans in rice mill effluent (i.e., paddy soaked water) for nutrient removal. In order to investigate the nutrient removal capability, microalgae are subjected to cultivation in both raw and autoclaved samples. The maximum phosphate removal by Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 98.3% and 97.6%, respectively, whereas, the removal of ammoniacal nitrogen by Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 92% and 90.3%, respectively. The growth (measured in terms of chlorophyll content) of Scenedesmus abundans and Chlorella pyrenoidosa in raw sample was 3.88 mg/l and 5.55 mg/l, respectively. The results indicate the suitability of microalgae cultivation in rice mill effluent treatment for nutrient removal.

In this study, the removal of hexavalent chromium from aqueous solution using ragi husk, an agricultural waste, has been reported. Response surface methodology was applied to statistically optimize the process variables such as pH (2–4), adsorbent dosage (2–5 g/L), initial chromium concentration (50–150 mg/L), rotating speed (50–100 rpm), and temperature (25–30°C) using the main effect plot and central composite design. A maximum removal of 68.64% of Cr(VI) was achieved under the optimum conditions of pH 2, adsorbent dose 2 g/L, initial chromium concentration 150 mg/L, rotating speed 100 rpm, and temperature 30°C. The statistical analysis of the data shows that the experiments are statistically significant with a regression coefficient (R2) value of 0.9445. The surface morphology of the adsorbent was elucidated using scanning electron microscopy, and the functional groups present in the adsorbent that aids in the removal of Cr(VI) were identified using Fourier transform infrared spectroscopy. The experimental results revealed that ragi husk can be used as a potential adsorbent for the removal of hexavalent chromium from aqueous solution. © 2014 American Institute of Chemical Engineers Environ Prog, 34: 139–145, 2015

Bicarbonate species in the aqueous phase is the primary source for CO2 for the growth of microalgae. The potential of carbon dioxide (CO2) fixation by Chlorella pyrenoidosa in enriched bicarbonate medium was evaluated. In the present study, effects of parameters such as pH, sodium bicarbonate concentration and inoculum size were assessed for the removal of CO2 by C. pyrenoidosa under mixotrophic condition. Central composite design tool from response surface methodology was used to validate statistical methods in order to study the influence of these parameters. The obtained results reveal that the maximum removal of CO2 was attained at pH 8 with sodium bicarbonate concentration of 3.33 g/l, and inoculum size of 30 %. The experimental results were statistically significant with R 2 value of 0.9527 and 0.960 for CO2 removal and accumulation of chlorophyll content, respectively. Among the various interactions, interactive effects between the parameters pH and inoculum size was statistically significant (P