Search

This study highlights the design, synthesis, spectroscopic and computational characterization, and catalytic phosphoesterase cleavage activity of isostructural copper(ii) and nickel(ii) complexes.

Small organic luminogens, owing to their contrasting stimuli-responsive fluorescence in solution along with strong emission in aggregated and solidstates, have been employed in optoelectronic devices, sensors, and bioimaging. Pyrene derivatives usually exhibit strong fluorescence and concentration-dependent excimer/aggregate emission in solution. However, the impacts of microenvironments on the monomer and aggregate emission bands and their relative intensities in solution, solid, and supramolecular aggregates are intriguing. The present study delineates a trade-off between the monomer and aggregate emissions of a pyrene-benzophenone derivative (ABzPy) in solution, in the solid-state, and in nanoaggregates through a combined spectroscopic and microscopic approach. The impact of external stimuli (viscosity, pH) on the aggregate emission was demonstrated using steady-state and time-resolved spectroscopy, including fluorescence correlation spectroscopy and fluorescence anisotropy decay analysis. The aggregate formation was noticed at a higher concentration (10 μM) in solution, at 77 K (5 μM), and in the solid-state due to the π-π stacking interactions (3.6 Å) between two ABzPy molecules. In contrast, no aggregate formation was observed in the viscous medium as well as in a micellar environment even at a higher concentration of ABzPy (50 μM). The crystal structure analysis further shed light on the intermolecular hydrogen-bonding-assisted solid-state emission, which was found to be highly sensitive toward external stimuli like pH and mechanical forces. The broad emission band comprising both monomer and aggregate in the aqueous dispersion of nanoaggregates was used for the specific cellular imaging of lysosomes and lipid droplets, respectively.

The review unravels the order–disorder conundrum in porous organic polymers in view of task-specific applications through a comparative deliberation.

We delineated the underlying design strategies and photophysical pathways involved in multifunctional luminescent probes for intracellular sensing and imaging.

Properties and functions of noncovalent interactions-driven fluorescent supramolecular self-assembly greatly depend on their evolution dynamics. Electron microscopy, atomic force microscopy, and confocal laser scanning microscopy have been used to elucidate...

In an enduring quest to develop highly efficient display and lighting devices over the decades, semiconductor nanocrystals have recently emerged as favorable candidates. However, developing a prudent and viable methodology to fabricate high-quality semiconductor nanocrystals exhibiting tunable luminescence, including single-component white light emission, is challenging. Herein, we report a facile one-pot synthetic route to fabricate white light emitting CdSeₓSy nanocrystals demonstrating high quantum yield using CdO, S powder, and Se powder as precursors. A phosphine-free route was adopted, employing paraffin oil as the reducing agent and solvent for the fabrication. The optical properties can be effectively tailored by controlling the reaction time and the Se/S molar ratio. The pristine CdSeₓSy nanocrystals exhibited a broad visible range emission from 400 to 750 nm. The CdSeₓSy nanocrystals (Se/S = 0.4) displayed white light emission with Commission Internationale de l’Eclairage (CIE) chromaticity coordinates of (0.30, 0.31) and quantum yield of 50 ± 3%. Moreover, by manipulating the Se/S ratio effectively, the band-edge (∼400–450 nm) to trap-state (∼550–750 nm) emission was tuned, and the distinct shades of white light were obtained. The white light emission was retained in nanocrystals-embedded poly(methyl methacrylate) (PMMA) thin film and also in the hydrogel matrix. Furthermore, white light emission characteristics from CdSeₓSy nanocrystals (Se/S = 0.4), PMMA thin film, and thin film coated white light emitting devices were found to be similar even after months of fabrication, indicating the high stability of the nanocrystals and sustainability of the materials derived from nanocrystals. The one-pot, low-cost fabrication route demonstrated in the present study offers the promising scope of white light emitting CdSeₓSy nanocrystals in solid-state display applications.

Supramolecular self-assembly of small organic molecules has emerged as a powerful tool to construct well-defined micro- and nanoarchitecture through fine-tuning a range of intermolecular interactions. The size, shape, and optical properties of these nanostructures largely depend on the specific assembly of the molecular building units, temperature and polarity of the medium, and external stimuli. The engineering of supramolecular self-assembled nanostructures with morphology-dependent tunable emission is in high demand due to the promising scope in nanodevices and molecular machines. However, probing the evolution of molecular aggregates from the solution and directing the self-assembly process in a pre-defined fashion are challenging. In the present study, we have deciphered the sequential evolution of supramolecular nanofibers from solution to spherical and oblong-shaped nanoparticles through the variation of solvent polarity, tuning the hydrophobic–hydrophilic interactions. An intriguing case of molecular self-assembly has been elucidated employing a newly designed π-conjugated thiophene derivative (TPAn) through a combination of steady-state absorption, emission measurements, fluorescence correlation spectroscopy (FCS), and electron microscopy. The FCS analysis and microscopy results revealed that the small-sized nanofibers in the dispersion further agglomerated upon solvent evaporation, resulting in a network of nanofibers. Stimuli-responsive reversible interconversion between a network of nanofibers and spherical nanoaggregates was probed both in dispersion and solvent-evaporated state. The evolution of organic nanofibers and a subtle control over the self-assembly process demonstrated in the current investigation provide a general paradigm to correlate the size, shape, and emission properties of fluorescent molecular aggregates in complex heterogeneous media, including a human cell., Supramolecular nanofiber evolution in solution and solid-state, including stimuli-responsive reversible interconversion among diverse nanoarchitectures, was probed through a combined spectroscopic and microscopic approach.

Deciphering the dynamics of intracellular organelles has gained immense attention due to their subtle control over diverse, complex biological processes such as cellular metabolism, energy homeostasis, and autophagy. In this context, molecular materials, including small-organic fluorescent probes and their supramolecular self-assembled nano-/microarchitectures, have been employed to explore the diverse intracellular biological events. However, only a handful of fluorescent probes and self-assembled emissive structures have been successfully used to track different organelle's movements, circumventing the issues related to water solubility and long-term photostability. Thus, the water-soluble molecular fluorescent probes and the water-dispersible supramolecular self-assemblies have emerged as promising candidates to explore the trafficking of the organelles under diverse physiological conditions. In this review, we have delineated the recent progress of fluorescent probes and their supramolecular self-assemblies for the elucidation of the dynamics of diverse cellular organelles with a special emphasis on lysosomes, lipid droplets, and mitochondria. Recent advancement in fluorescence lifetime and super-resolution microscopy imaging has also been discussed to investigate the dynamics of organelles. In addition, the fabrication of the next-generation molecular to supramolecular self-assembled luminogens for probing the variation of microenvironments during the trafficking process has been outlined.

A π-conjugated porous organic polymer (BCzBz) was fabricated employing N,N'-bicarbazole and benzothiadiazole as molecular building units exhibiting broad visible light absorption. The photostable, water-dispersible, and cytocompatible BCzBz was demonstrated as an efficient probe for intracellular reactive oxygen species generation under photoirradiation.

Controlling the nonradiative deactivation of triplet states and tuning the singlet–triplet energy gap are the major challenges in developing materials that exhibit thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP). Additionally, the conformational flexibility/rigidity around the donor–acceptor bond and the π-spacer unit significantly alters the charge transfer efficiency, subsequently impacting the relative propensity of TADF and RTP. Herein, we propose a new class of multichromophoric tridonor–acceptor (D3–A) compounds with rigid and flexible π-spacers having N-rich pyridoquinoxaline and pyridopyrazine acceptor cores, respectively. The molecule with carbazole donors meta to the quinoxaline nitrogen of the rigid pyridoquinoxaline core exhibits TADF, whereas the variation of the linkage position of carbazole to the pyridoquinoxaline as well as the twisted and flexible pyridopyrazine core shows predominantly RTP due to a relatively higher singlet–triplet energy gap. Increasing the donor strength with phenoxazine in the pyridopyrazine system leads to TADF and RTP simultaneously. Furthermore, we demonstrate the promising scope of the all-organic triplet harvesting materials in solid-state security encryption.

Supramolecular self-assembly of small organic molecules has emerged as a powerful tool to construct well-defined micro- and nanoarchitecture through fine-tuning a range of intermolecular interactions. The size, shape, and optical properties of these nanostructures largely depend on the temperature and polarity of the medium, along with the specific self-assembled pattern of molecular building units. The engineering of supramolecular self-assembled nanostructures with morphology-dependent tunable emission is in high demand due to the promising scope in nanodevices and molecular machines. However, challenges are probing the evolution of molecular aggregates from a true solution and directing the self-assembly process in a pre-defined fashion. The structure of molecular aggregates in the solution can be predicted from fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS) analysis. On the other hand, the morphology of the aggregates can also be visualized through electron microscopy. Nevertheless, a direct correlation between emission from molecular aggregates in the aqueous dispersion and their morphology obtained through a solid-state characterization is missing. In the present study, we decipher the sequential evolution of molecular nanofibers from solution to spherical and oblong-shaped nanoparticles through the variation of solvent polarity, adjusting the hydrophobic-hydrophilic interactions. The intriguing case of molecular self-assembly is elucidated employing a newly designed π-conjugated thiophene derivative (TPAn) through a combination of steady-state absorption, emission measurements, FCS, and electron microscopy. The FCS analysis and microscopy results infer that small-sized nanofibers in the dispersion are further agglomerated, resulting in a network of nanofibers upon solvent evaporation. The evolution of organic nanofibers and subtle control over the self-assembly process demonstrated in the current investigation provides a general paradigm to correlate the size, shape, and emission properties of diverse fluorescent molecular aggregates in complex heterogeneous media, including a human cell.

We fabricated an inorganic–organic hybrid upconversion nanoprobe for the ratiometric detection of aliphatic biogenic amines in water. The hybrid nanoprobe comprises a thiophene-based acceptor–π-donor–π-acceptor organic fluorescent dye, TDPM, and near-infrared light-absorbing upconversion nanoparticles (UCNPs). The organic dye was loaded into a mesoporous silica-coated UCNP (UCNP@mSiO2) matrix to circumvent the issues of water insolubility and higher energy excitation. Yb3+ and Tm3+-doped UCNPs exhibited dual emission bands at 475 and 645 nm upon excitation with a 980 nm laser. The significant spectral overlap between the absorption and the emission bands of TDPM and UCNPs, respectively, at 475 nm led to resonance energy transfer (RET) from the UCNPs to TDPM resulting in the quenching of the UCNP emission. In contrast, ‘turn-on’ emission was noticeable with the addition of aliphatic biogenic amines due to an inhibition of the RET. The emission at 645 nm remained unaffected during the energy transfer process making the hybrid probe a versatile platform for the ratiometric detection of different aliphatic biogenic amines. Furthermore, we explored the sensing of aliphatic biogenic amines in adulterated milk and rotten fish. The unique material attributes demonstrated in the current study hold promise for further development of real-time sensors and switches based on hybrid upconversion nanoprobes.

The current study demonstrates a simple and economical synthetic approach for the development of a multifunctional Schiff base compound (NRSB) through the condensation reaction between 2-hydroxynaphthaldehyde and a five-membered heterocycle 3-aminorhodanine. The rhodanine unit was chosen due to the presence of an active electron-deficient carbonyl group. A facile chemical transformation from the closed to the open form was noticeable for rhodanine derivatives in the presence of a suitable nucleophile or an electron-rich system. Such a unique feature was invoked to develop a versatile molecular platform for the colorimetric sensing of methanol and the fluorometric detection of Al3+ ions. The nucleophilic attack by methanol on NRSB led to the formation of an open-ring compound, NRSB-O, with a distinct change in color from colorless to yellow. NRSB showed noticeable sensitivity towards methanol and the detection limit was found to be 0.43 wt%. The methanol-induced chemical transformation from NRSB to NRSB-O was probed through X-ray diffraction studies. The strong CH–π interaction between the methylene protons of the rhodanine unit and the π-electron cloud of the naphthalene unit (3.03 A) and the π–π interaction between naphthalene and the rhodanine moiety (3.51 A and 3.55 A) lead to a two-dimensional (2D) supramolecular structure in the NRSB crystal. NRSB-O possesses strong CH–π interactions between molecules with an intermolecular distance of 2.49 A, leading to 2D-supramolecular self-assembly. The crystal structure revealed the scope of the chelation of NRSB-O with metal ions due to the presence of different N, O, and S donor centers. Interestingly, NRSB-O exhibited a turn-on fluorescence response specifically towards Al3+ through the chelation-enhanced fluorescence (CHEF) mechanism over other competitive metal ions. The turn ‘on–off’ fluorescence switching was demonstrated for multiple cycles through the alternative addition of Al3+ and EDTA. The low-cost, simple design strategy of NRSB and NRSB-O as delineated in the current study would contribute to further development of task-specific molecular sensors and switches.

Control of nonradiative deactivation of triplet states and tuning the singlet-triplet energy gap (ΔEST) are the major challenges to develop materials exhibiting thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP). Herein, we propose a new class of multichromophoric tridonor-acceptor (D3-A) compounds with rigid and flexible π-spacer having N-rich pyridoquinoxaline (PQ) and pyridopyrazine (PZ) acceptor core, respectively. The molecule with carbazole (Cz) donors at meta to quinoxaline (QX) nitrogen of rigid PQ core exhibits TADF. Whereas, the variation of the linkage position of Cz to PQ as well as twisted and flexible PZ core show predominantly RTP due to relatively higher singlet-triplet energy gap (ΔEST). Increasing the donor strength with phenoxazine (PO) in PZ system leads to simultaneous TADF and RTP. Further, we demonstrate the promising scope of all-organic triplet harvesting materials in solid-state security encryption.

Tuning the fluorescence of π-conjugated small organic molecules through the structural modifications and in the presence of external stimuli have found immense applications ranging from sensing, switching, optoelectronics to bioimaging. Herein, we demonstrated a simple design strategy for the synthesis of a pyrene-cyanostyrene-pyridine molecular triad (PYBNP) using a cost-effective, one-step Knoevenagel condensation between 1-pyrenecarboxaldehyde and 2-(4-(pyridin-4-yl)phenyl)acetonitrile. PYBNP exhibited strong solid-state emission having a quantum yield of ∼ 36 ± 3% due to the deactivation of nonradiative decay channels through the restriction of intramolecular rotations and reduced π-π stacking interactions as revealed from the crystal structure analysis. Similarly, PYBNP was found to be highly emissive in the constrained environments like viscous medium and aggregated state. The optical properties of PYBNP could be tuned by the UV light-mediated dynamic Z/E-isomerization as elucidated through fluorescence spectroscopy and NMR analysis. Additionally, the pyridinic nitrogen centre allowed the fabrication of methylated analog (PYBNPM; a new cationic photoresponsive species). The cationic PYBNPM showed a better solvatochromic behavior contrary to PYBNP due to the efficient intramolecular charge transfer (ICT). The different crystal packing of PYBNP and that of hexafluorophosphate salts of PYBNPM led to distinct fluorescent properties in the solid-state. As a preliminary exploration, the cationic PYBNPM(PF6) was employed for the specific imaging of the mitochondria through multiple fluorescence channels in an aqueous medium. The cost-effective and viable design strategy demonstrated for the fabrication of a simple molecular triad holds the promise for the emergence of new functional fluorescent molecules to molecular materials for task-specific applications.

A novel approach for the fabrication of a solution processable conjugated porous organic polymer (CzBDP) involving a flexible core composed of carbazole and boron dipyrromethene was developed. The red emitting soluble polymer was found to be an excellent probe for the generation of both singlet oxygen and superoxide anion radicals under visible light irradiation.

The present study demonstrates the tuning of iconic optical features of pyrene through its judicious assembly with a C3-symmetric triaminoguanidinium ion, leading to the development of a unique multifunctional luminescent material PYTG. By fine tuning the concentration and the external stimuli, such as temperature, the addition of analytes led to a dramatic change in the fluorescence of PYTG, providing an excellent platform for the exploration of the dynamic and static excimer formation. Recently, white-light-emitting molecular probes have received considerable attention from the scientific community due to their great potentials in display devices. Tripodal PYTG was employed as a pure white-light emitter consisting of blue emission from monomers and orange emission from excimers both in solution and thin film with Commission Internationale de l’Eclairage (CIE) coordinates of (0.33, 0.34) and (0.33, 0.38), respectively. The formation of a dynamic excimer along with monomer fluorescence at higher concentrations of PYTG led to tunable emission. Additionally, the rich electronic properties of PYTG allowed efficient detection of trivalent metal ions by turn-on fluorescence and colorimetric sensing of fluoride ions. PYTG selectively detected Fe3+ and Al3+ with nanomolar sensitivity in a semi-aqueous solution via a chelation-enhanced fluorescence response in the orange-red region (λem = 588 nm) by static excimer formation. The ‘on–off’ fluorescence switching by the consecutive addition of trivalent cations and a chelating ligand EDTA makes PYTG a promising fluorescent molecular switch. A simple and cost-effective strategy, leading to the development of a versatile fluorescent probe and an in-depth exploration of the structure–property relationship as delineated in the present manuscript, will pave the way for the emergence of novel task-specific molecular optical materials.

White light emitting (WLE) materials are of increasing interest owing to their promising applications in artificial lighting, display devices, molecular sensors, and switches. In this context, organic WLE materials cater to the interest of the scientific community owing to their promising features like color purity, long-term stability, solution processability, cost-effectiveness, and low toxicity. The typical method for the generation of white light is to combine three primary (red, green, and blue) or the two complementary (e.g., yellow and blue or red and cyan) emissive units covering the whole visible spectral window (400-800 nm). The judicious choice of molecular building blocks and connecting them through either strong covalent bonds or assembling through weak noncovalent interactions are the key to achieve enhanced emission spanning the entire visible region. In the present review article, molecular engineering approaches for the development of all-organic WLE materials are analyzed in view of different photophysical processes like fluorescence resonance energy transfer (FRET), excited-state intramolecular proton transfer (ESIPT), charge transfer (CT), monomer-excimer emission, triplet-state harvesting, etc. The key aspect of tuning the molecular fluorescence under the influence of pH, heat, and host-guest interactions is also discussed. The white light emission obtained from small organic molecules to supramolecular assemblies is presented, including polymers, micelles, and also employing covalent organic frameworks. The state-of-the-art knowledge in the field of organic WLE materials, challenges, and future scope are delineated.

The thiophene appended Schiff's base ligand, 1-(2-(thiophen-2-yl)ethylimino)methyl)naphthalene-2-ol (HL) with N,O donor sites has been synthesized by the condensation between 2-hydroxy-1-naphthaldehyde and thiophene-2-ethylamine. The square planar 1:2 complexes of HL having general formula [M(L)2] (M = Ni(1) and Pd(2)) with nickel(II) and palladium(II) have been synthesized and characterized by several spectroscopic techniques. The geometry has been confirmed by single crystal X-ray study for complex 1. The electronic structure and spectral properties of the complexes are interpreted by DFT and TDDFT studies.

The square planar nickel(II) complexes have been synthesized by the reaction of nickel(II) chloride hexahydrate and the in situ condensed thiophene appended Schiff base ligands of thiophene-2-ethylamine with 3,5-dimethyl-2-hydroxybenzaldehyde or 3,5-dichloro-2-hydroxybenzaldehyde for [Ni(L1)2] (1) and [Ni(L2)2] (2) respectively. The complexes have been characterized by several spectroscopic techniques, viz. FT-IR, 1H NMR, absorption and emission spectroscopy. The complexes crystallize in monoclinic crystal system with C2/c space group for 1 and triclinic crystal system with P−1 space group for 2. In complex 1 the nickel sits on an inversion centre with symmetry –x, 2–y, –z. Cyclic voltammgrams of the complexes show quasi-reversible NiII/NiIII oxidation couple along with irreversible NiII/NiI reduction. Electronic structure and spectral properties are well interpreted by DFT and TDDFT calculations.

New rhodium(III)-triphenylphosphine complex, [Rh(PPh3)(L)Cl2](PF6) (1) with thioether containing NNS donor ligand (L) (L = 2-(methylthio)-N-((pyridine-2-yl)methylene)benzenamine) has been synthesized and characterized. The pseudo octahedral geometry of the complex has been confirmed by single crystal X-ray analysis. The electronic structure, redox properties, absorption and emission properties of the complexes have been interpreted by DFT and TDDFT calculations. The complex effectively catalyzed the transfer hydrogenation reaction of ketones in 2-propanol and oxidation of alcohols in presence of NMO.

The paper presents a combined experimental and computational study of tricarbonyl complexes fac -[Re(CO) 3 (L 1 /L 2 )Cl] ( 1a/1b ) (L 1 = 2-(methylthio)-N-((pyridine-2-yl)methylene)benzenamine and L 2 = 2-(ethylthio)-N-((pyridine-2-yl)methylene)benzenamine). The Schiff base ligands L 1 and L 2 have been synthesized and characterized by elemental and spectroscopic analysis. Along with spectral characterizations, the structural confirmation by single crystal X-ray study has been done for complex 1a . The rhenium atom adopts a distorted octahedral geometry and is coordinated by three carbonyl ligands in a fac arrangement. The electronic structure, redox properties, absorption and emission properties of ligands and complexes have been explained based on DFT and TDDFT calculations. The complexes show MLCT bands at 443–448 nm and emitted at 405–410 nm upon excitation at 320–326 nm, characterized as ILCT transitions.

A few dioxomolybdenum complexes of the type MoO2L and MoO2L·B of a new diprotic tridentate ONS chelating ligand, H2L, have been synthesized with the aim to examine their potential to behave as models for the active site of an oxidoreductase molybdoenzyme like xanthineoxidase. The MoO2L complex produces MoO2L·B on treatment with neutral monodentate Lewis bases such as γ-picoline, 2-methylimidazole or 1-allylimidazole, utilizing the vacant sixth coordination site. They have been characterized by spectroscopic and electrochemical techniques. The complexes MoO2L (1), MoO2L(γ-pic) (2) and MoO2L(1-allyl imz) (4) were structurally characterized by single crystal X-ray diffraction. The complex MoVIO2L exhibits oxotransfer to PPh3 in acetonitrile medium leading to the formation of MoIVOL, which is reoxidized to MoVIO2L on treatment with DMSO or pyridine N-oxide. DFT calculations on the ligand and complexes 1, 2 and 4 were also carried out.

The complex cis-[Ru(PPh3)(L)Cl2] (1) has been synthesized by the reaction between Ru(PPh3)3Cl2 and thioether containing azo ligand (L) (L = 1-methyl-2-{(o-thiomethyl)phenylazo}imidazole). The Cl atoms have been exchanged with Br−, I− and NCS− leading to the formation of cis-[Ru(PPh3)(L)Br2] (2), cis-[Ru(PPh3)(L)I2] (3) and cis-[Ru(PPh3)(L)(NCS)2] (4), respectively. The complexes have been characterized by spectroscopic techniques (IR, NMR and UV–Vis) and geometries have been confirmed by X-ray crystal structures of 1 and 3. The electronic spectra of the complexes show moderately intense MLCT band along with intense ILCT transitions. Cyclic voltammetric studies show one quasi reversible Ru(III)/Ru(II) oxidation couple and two successive one electron reductions leading to the formation of L − and L2−, respectively. The electronic structure, redox and absorption properties of the complexes have been explained based on DFT and TDDFT results.

The article deals with a combined experimental and computational study of rhenium tricarbonyl Schiff base complexes having general formula fac-[ReCl(CO)3(L1/L2)] (1/2) (L1 = N-[(2-pyridyl)methyliden]-α-aminonaphthalene and L2 = N-[(2-pyridyl)methyliden]-β-aminonaphthalene). The complexes fac-[ReCl(CO)3(L1/L2)] (1/2) have been synthesized and characterized by elemental analysis, spectroscopic studies, electrochemistry and X-ray crystal analysis for complex 2. Crystal structure of 2 reveals the facial geometry of the carbonyl ligand and Re is in distorted octahedral environment in the complex. The electronic structure, redox properties, absorption and emission properties have been explained based on DFT and TDDFT calculations. The complexes show MLCT bands at 395–405 nm and emitted at 425–435 nm upon excitation at 310 nm, characterized as ILCT transitions. The complexes exhibit two irreversible ReII/ReI and ReIII/ReII oxidative responses when scanned in the potential range 0.0–2.0 V in cyclic voltammetric studies.

The new rhenium(I) carbonyl complexes containing {Re(CO) 3 } + fragment with redox non-innocent ligands L 1 /L 2 (L 1 , 1-methyl-2-{( o -thiomethyl)phenylazo}imidazole and L 2 , 1-ethyl-2-{( o -thioethyl)phenylazo}imidazole) having general formula fac -[ReX(CO) 3 (L 1 /L 2 )] ( 1 / 2 ) (X = Cl ( 1 ) and Br ( 2 )) have been synthesized and characterized by both experimental and theoretical studies. The structural confirmation has been carried out for 1a . The complexes show one irreversible Re I /Re II oxidation and one reversible along with an irreversible ligand reduction in the cyclic voltammetric studies. The electronic structure and the nature of Re–CO bonding has been explained by means of DFT and NBO calculations. The spin allowed singlet–singlet electronic transitions of 1a and 2a have been calculated with TDDFT method, and the experimental spectra of the complexes have been discussed on this basis.

Inorganic Chemistry Section, Department of Chemistry, Jadavpur University, Kolkata-700 032, India E-mail : tkmondal@chemistry.jdvu.ac.in The cis-(Cl)-[Ru(PMAQ)(PPh3 )Cl2 ] (1) (where, PMAQ = 8-{(2´-pyridylmethylene)amino}quinoline) complex has been synthesized and characterized by several spectroscopic techniques. The absorption and emission properties of the complex have been studied. Upon excitation in ILCT band at 331 nm, the complex exhibits emission at 475 nm. The emission decay profile has bi-exponential in nature with life time of 3.98 ns. The complex exhibits a quasi-reversible one electron RuII/RuIII oxidation couple along with a ligand based reduction in cyclic voltammetric study. The redox properties are well supported by DFT data. The electronic structure of the complex has been interpreted by DFT method. The spin allowed electronic transitions computed by TDDFT method have a good agreement with the experimental spectrum of the complex. The complex efficiently catalyzes the oxidation of primary and secondary alcohols to the respective aldehydes and ketones with moderate to high conversions in presence of N-methylmorpholine-N-oxide (NMO) as co-oxidant.