Search

In this study we demonstrated for the first time synthetic procedures for composites of salinomycin (SalH) and two-line ferrihydrite. The products were characterized by various methods such as elemental analysis, attenuated total reflectance–Fourier-transform spectroscopy (ATR-FTIR), electron paramagnetic resonance spectroscopy (EPR), powder X-ray diffraction analysis (XRD), electrospray-ionization mass spectrometry (ESI-MS), thermogravimetric analysis with differential thermal analysis (DTA) and mass spectrometry (TG-DTA/MS). The EPR spectra of the isolated compounds consisted of signals associated with both isolated Fe3+ ions and magnetically coupled Fe3+ ions. Powder XRD analyses of the isolated products showed two intense and broad peaks at 9° and 15° 2Θ, corresponding to salinomycinic acid. Broad peaks with very low intensity around 35°, assigned to two-line ferrihydrite, were also registered. Based on the experimental results, we concluded that salinomycin sodium reacted with Fe(III) chloride to form composites consisting of two-line ferrihydrite and salinomycinic acid. One of the composites exerted pronounced antitumor activity in the sub-micromolar concentration range against human cervical cancer (HeLa), non-small-cell lung cancer (A549), colon cancer (SW480), and ovarian teratocarcinoma (CH1/PA1) cells. [ABSTRACT FROM AUTHOR]

Two trinuclear oxo-centred iron(III) coordination compounds of monensic and salinomycinic acids (HL) were synthesized and their spectral properties were studied using physicochemical/thermal methods (FT–IR, TG–DTA, TG–MS, EPR, Mössbauer spectroscopy, powder XRD) and elemental analysis. The data suggested the formation of [Fe3(µ3–O)L3(OH)4] and the probable complex structures were modelled using the DFT method. The computed spectral parameters of the optimized constructs were compared to the experimentally measured ones. In each complex, three metal centres were joined together at the axial position by a μ3–O unit to form a {Fe3O}7+ core. The antibiotics monoanions served as bidentate ligands through the carboxylate and hydroxyl groups located at the termini. The carboxylate moieties played a dual role bridging each two metal centres. Hydroxide anions secured the overall neutral character of the coordination species. Mössbauer spectra displayed asymmetric quadrupole doublets that were consistent with the existence of two types of high-spin iron(III) sites with different environments—two Fe[O5] and one Fe[O6] centres. The solid-state EPR studies confirmed the +3 oxidation state of iron with a total spin St = 5/2 per trinuclear cluster. The studied complexes are the first iron(III) coordination compounds of monensin and salinomycin reported so far. [ABSTRACT FROM AUTHOR]

Herein, we design a cathode material based on layered Na2/3(Mn1/2Fe1/2)O2 for practical application by combining the Co substitution and MgO treatment strategies. The oxides are prepared via solid-state reactions at 900 °C. The structure, morphology, and oxidation state of transition metal ions for Co-substituted and MgO-treated oxides are carefully examined via X-ray diffraction, IR and Raman spectroscopies, FESEM with EDX, specific surface area measurement, and XPS spectroscopy. The ability of oxides to store sodium reversibly is analyzed within a temperature range of 10 to 50 °C via CV experiments, galvanostatic measurements, and EIS, using half and full sodium ion cells. The changes in the local structure and oxidation state of transition metal ions during Na+ intercalation are monitored via operando XAS experiments. It is found that the Co substituents have a positive impact on the rate capability of layered oxides, while Mg additives lead to a strong increase in the capacity and an enhancement of the cycling stability. Thus, the highest capacity is obtained for 2 at.%-MgO-treated Na2/3(Mn1/2Fe1/2)0.9Co0.1O2 (175 mAh/g, with a capacity fade of 28% after 100 cycles). In comparison with Co substituents, the Mg treatment has a crucial role in the improvement of the lattice stability during the cycling process. The best electrode materials, with a chemical formula of 2 at.%-MgO treated Na2/3(Mn1/2Fe1/2)0.9Co0.1O2, were also used for the full cells design, with hard carbon as an anode. In the voltage window of 2–4 V, the capacity of the cells was obtained as 78 mAh/g and 51 mAh/g for applied current densities of 12 mA/g and 60 mA/g, respectively. [ABSTRACT FROM AUTHOR]

To outline the role of dual‐ion intercalation chemistry to reach sustainable energy storage, the present Review aimed to compare two types of batteries: widely accepted dual‐ion batteries based on cationic and anionic co‐intercalation versus newly emerged hybrid metal‐ion batteries using the co‐intercalation of cations only. Among different charge carrier cations, the focus was on the materials able to co‐intercalate monovalent ions (such Li+ and Na+, Li+ and K+, Na+ and K+, etc.) or couples of mono‐ and multivalent ions (Li+ and Mg2+, Na+ and Mg2+, Na+ and Zn2+, H+ and Zn2+, etc.). Furthermore, the Review was directed on co‐intercalation materials composed of environmentally benign and low‐cost transition metals (e. g., Mn, Fe, etc.). The effect of the electrolyte on the co‐intercalation properties was also discussed. The summarized knowledge on dual‐ion energy storage could stimulate further research so that the hybrid metal‐ion batteries become feasible in near future. [ABSTRACT FROM AUTHOR]