Search

The aim of the study was to examine changes in the position of the abutment teeth (AT), size of undercuts for a denture clasp, as well as an existence of an adequate preparation of abutment teeth. A total of 156 casts of partially edentulous jaws, with 460 AT, were analyzed. The size of undercuts, a degree of abutment rotation, inclination and migration were measured using a dental parallelometer. The abutment teeth position was related to the level of occlusal plane in a dental articulator. Furthermore, the existence of an adequate preparation of abutment teeth, as well as a type of a denture and a type of a denture retention element were also considered. Analysis were carried out twice on casts made from a hard stone, the first time before the denture treatment had begun and the second time on the new casts obtained after new dentures had been delivered. The first analysis (prior dental treatment) revealed that a total of 33.9% of the analyzed AT were rotated, 31.3% were inclined, 12.1% had migrated, and 57.3% were elongated above the occlusal plane. On the casts obtained after the new dentures had been made, it was observed that none of the AT had an adequate preparation. Only 37.6% of all retention elements were located in adequate undercut positions on the AT. Upon the results of the present study a conclusion can be established that many abutment teeth are rotated, elongated, inclined, and migrated, which point to a requirement for AT preparation prior the manufacture of new denture; however none of the AT was adequately prepared considering insertion plane and many denture elements were located in an inadequate undercut size.

Sixty eight consecutive Slovenian patients with craniomandibular disorders (CMD) participated as the study group and another 400 adults from the regional population sample participated as the control group. The aim was to determine the impact of craniomandibular disorders to the self-perceived oral health related quality of life (OHRQoL) and to compare the OHRQoL with a control group. The mean Oral Health Impact Profile (OHIP) summary scores were computed for all patients with the same diagnosis and for the same subgroups of the axis I according to the RDC/TMD exam protocol. The mean OHIP subscores for the seven domains of the OHIP questionnaire were compared between the study and the control group. Significantly higher OHIP summary scores and all the OHIP subscores were obtained in the CMD patients in comparison with the control group (p<0.05). Furthermore, in the CMD group, patients with two related diagnoses had significantly higher impaired OHRQoL than patients with a single one. The results revealed: 1. The CMD subjects are highly associated with the reduced OHRQoL, 2. Higher number of diagnoses of the axis I according to the RDC/TMD results in the more impaired OHRQoL, 3. The higher age of the patients revealed the more impaired OHRQoL.

The aim of this study was to clinically determine the thickness of masticatory mucosa in the hard palate and tuberosity as potential donor sites for subepitelial grafts for ridge augmentation procedures of small and moderate alveolar ridge defects to improve aesthetics of a pontic area of fixed partial dentures. In 102 periodontally healthy fully dentate subjects the thickness of mucosa was assessed by bone sounding with a periodontal probe. Twenty measurement points were defined, 18 on hard palate located on 3 lines running at different distances parallel to gingival margin and 2 on tuberosity. Data were analysed to determine differences between gender and different body mass index using t-test. The mucosa on the hard palate was significantly thicker than on the tuberosity. The thickest mucosa was registered on the second and the third line behind canines and on all 3 lines behind the first premolar. These areas are recommended as potential donor sites. Males had significantly thicker mucosa than females (p < 0.01), except for the sites behind the first molar (p > 0.05) where the mucosa was the thinnest in the both gender, which was attributed to the protuberance of the palatal root of the first molar. The same was with the body mass index. Therefore canine-premolar palatal region is recommended for harvesting free subepitelial grafts for moderate augmentation of alveolar ridges for achieving optimal aesthetics of the pontic area.

Digital photography has become available to everybody. The aim of this study was to examine possibility of calculating the width of a missing central incisor using digital photographs. Digital photographs were obtained from 51 dentate subjects using a 3.1 Megapixel digital camera from various distances: 35 cm, 70 cm, 1 m and 1.5 m. For the calculation of the width of maxillary left central incisor (MLI), the following equation was used: MLI(calculated) = Photographic width of MLI x IPD / photographic IPD. Statistical analysis was made (Kolmogorov-Smirnov test, dependent sample t-test, correlation and frequencies) using SPSS 10.0 for Windows. Results revealed no significant difference between the calculated MLI (70 cm, 1 m and 1.5 m distance) and actual MLI, however calculated MLI from 35 cm distance was significantly different from the actual MLI value (p < 0.01). The highest correlation was between calculated MLI (70 cm distance) and actual MLI. However, the highest percentage of results from a distance of 70 cm also fitted within +/- 0.3 mm; +/- 0.5 mm and +/- 1 mm difference from the actual MLI values. However, the results obtained from 1 m distance were also satisfactory. The technique of use of digital photography is of proven value in calculating the width of a maxillary central incisor. The photographs using a simple digital camera should be taken from a distance from 70 cm to 1 m. Saving such photographs in a dental office may eventually be helpful for calculating dimensions of artificial teeth.

Background: Except for denture quality, many other factors are related to a patient's satisfaction with complete dentures (CDs)., Methods: A total of 222 patients with CDs took a part in this study. A questionnaire divided into 3 parts was completed by both the patients and the dentist, independently. The patients rated their dentures using a scale ranging from 1 to 5 (1 = dissatisfaction to 5 = excellent), and a dentist rated the quality of the denture and the denture-bearing area., Results: Patients were mostly satisfied with the quality of their CDs. Only 7.2% of the patients were absolutely not satisfied with their dentures. Patients with a low level of education were more satisfied in general with their aesthetic appearance. Patients with better self-perception of their affective status and quality of life showed higher levels of general satisfaction. Patients with better self-perception of their economic status showed lower levels of satisfaction. Younger patients wearing dentures for the first time, with short periods of being edentulous, and with better quality maxillary denture-bearing areas were more satisfied with the retention of maxillary CDs. In contrast, younger patients with first-time dentures, a short period of being edentulous, and with better quality mandibular denture-bearing areas gave lower ratings to the retention and comfort of wearing mandibular dentures., Conclusions: Level of education, self-perception of affective and economic status, and quality of life are all related to patient satisfaction. However, the quality of dentures shows the strongest correlation with patient satisfaction. Not only the quality of the denture-bearing area but the denture-wearing experience itself seems to be more important in determining patient satisfaction with mandibular CDs.

The aim of this study was to evaluate the behavior of high-noble gold-platinum alloy samples (18 + 8 Rafinerija plemenitih kovina, Zagreb, Hrvatska), in a phosphate buffer pH 6.0. The aim of the study was to determine the type and amount of released metal ions from the alloy, and to evaluate how the time of exposure to the phosphate buffer pH 6.0 influences the release of metal ions from the alloy. Manufacturer samples 8.0 x 6.5 x 1.0 mm in size, with a surface area of 133 mm2 were used. The release of metal ions from the tested alloy was measured in ten time periods (after 1, 2, 3, 4, 5, 6, 7, 14, 21 and 30 days). Six samples were used (n = 6) for each time period that the alloy was in the solution, which means that a total of 60 samples was analyzed. Solutions, in which the samples were placed, were analyzed with the inductively coupled plasma atomic emission spectrometer (ICP-AES, JY 50P, Jobin-Ywon, France). It was found that four metal ions were released; zinc ions (Zn), chromium ions (Cr), copper ions (Cu) and iron ions (Fe). The most released ions from the gold-platinum alloy were those of zinc (Zn), and the least released were those of iron (Fe) (p < 0.01). The results of the study show that the time the tested alloy spent in the phosphate buffer pH 6.0 solution has an effect on the release of ions (p < 0.01).

Alveolar bone loss (RRR) is a continuous process following tooth extraction, more pronounced during the first few months after the tooth extraction than later. The RRR in the mandible is twice that of the maxilla during a 1-year period and the mandibular: maxillary resorption ratio increases further to 4:1. So far, the etiology of RRR has not been elucidated. It has been speculated that both systemic and local factors contribute. The aim of this study was to analyse the rate of RRR in five different regions of both jaws on lateral cephalograms of 100 complete denture wearers during a one-year period and to compare the rate of RRR between patients being edentulous over a different period of time and between patients with different body mass index. The height of residual ridges was measured on 5 different sites at the delivery of the dentures and a year later using a calibrated grid. The results revealed significant RRR in a one year period. Body mass index had no significant influence on the rate of RRR on any of the five examined sites of the maxilla or the mandible (p > 0.05), while the period of edentulousness had a significantly higher rate of resorption in first 3 sites of measurement (anteriorly) in patients being edentulous less than 1 year than in patients being edentulous for 1-10 years or for over 10 years (ANOVA, p < 0.05).

The aim of the study was to examine oral status in patients of the Metković region with fixed prosthodontic appliances. The aim was also to evaluate aesthetic materials used, and difference between the frequency of crowns and bridges dependent on patient's age and frequency of visits to dentist. The examination was performed on 212 dental patients with fixed prosthetic appliances, from the Public Health Center "Metković". A questionnaire was created for the purpose of this study and was filled in by the patients. The dentist registered oral status. Descriptive statistics and chi 2 tests were used for the data analysis. Following conclusions were made: 1. The examined patients had relatively high caries (tooth decay), gangrene and residual roots prevalence, the oral hygiene was not appropriate, calculus and gingivitis were diagnosed in all patients (100%) and these facts point out to the insufficient preventive oral health care in the Metković region, as well as to the insufficient self-perception on the proper oral hygiene maintenance. 2. Patients who visit their dentist regularly (once a year or more) have significantly more crowns than bridges than the patients who visit their dentist irregularly or when in pain (p < 0.01). 3. Almost all fixed prosthetic appliances not older than 10 years were made of porcelain (98%), while acrylic veneer crowns (or chromasite) were more frequent in appliances older than 10 or 15 years (p < 0.01). There was no gender difference dependent on the material used (p > 0.05). High frequency of porcelain was attributed to the high economic status of this region, as well as to a dentist's preference.

The aim of this study was to screen patients with fixed prosthodontic appliances that were in oral cavity for a period of 5 years or more and to assess clinically and radiologically root caries, gingival recession, pocket formation, alveolar ridge resorption, as well as gingival (GI) and plaque index (PI). The aim also was to find out the differences between materials and constructions, between abutment and non-abutment teeth, and to find out the need for replacement. A total of 260 patients and their orthopantomograms were examined, with a total of 2,265 teeth, 610 being bridge abutments and 246 being crowns. The most frequent were metal+ acrylic veneer crowns or bridges. Root caries was found under the abutments in 10-20%; however abutments with ceramic crowns had the lowest percentage of caries (p < 0.01). Alveolar ridge resorption, pocket formation deeper than 3 mm and gingival recession of various degree was found in 50% of the cases, again with the lowest percentage of ceramic-fused-to-metal appliances (p < 0.01). Pocket depth was registered in significantly higher percentage in metal-acrylic veneer appliances compared to natural teeth (p < 0.01), while there was no significant difference between metal-ceramic appliances and natural teeth (p > 0.05). Although the worst findings were recorded for metal- + acrylic veneer crowns for PI, no significant difference existed between crowns of different material or non-abutment teeth (p > 0.05). There was statistically significant difference between abutments with metal + acrylic veneer crowns, full metal crowns, metal ceramic crowns and non-abutments for GI scores. Higher percentage of scores 0 and 1 was recorded for metal ceramic crowns and non-abutments and significantly higher percentage of scores 2 and 3 was recorded for metal + acrylic veneer crowns and full metallic crowns. Almost 50% of metal-ceramic abutments had no pathologic findings. Almost 30% of the patients needed replacement, or even some abutments to be extracted and therefore a new prosthodontic appliance.

The aim of the study was to determine the number and the type of the occlusal contacts (strong, weak) with respect to the type of the prosthodontic appliance (fixed, removable, combined fixed-removable) and with respect to the Eichner classification in patients with their appliances being in a good function for a long time. The aim of the study was also to determine the number and the type of the occlusal contacts (strong, weak) with respect to the type of occlusion (canine guided, group function or balanced) and the presence of the RCP-ICP slide. A total of 440 patients with different types of prosthodontic appliances were examined for the antagonistic occlusal contacts using occlusal strips of 11 microm and 50 microm. The average number of occlusal contacts was 10.5 for the upper and 10.46 for the lower posterior teeth, approximately 5 on each side of the tooth arch. The results of the study suggest that the biggest number of occlusal contacts were recorded for the small span fixed appliances (2 on average), the greater span fixed and fixed-removable prosthodontic appliances exhibited 1.6 occlusal contacts, and the removable complete denture exhibited 1.2 contact per the tooth in the posterior region. The number of the hard occlusal contacts was significantly greater in fixed and fixed-removable prosthodontic appliances in comparison with the complete dentures (p < 0.05), while there was no significant difference between the prosthodontic appliances for the weak occlusal contacts (p > 0.05). The overall number of the occlusal contacts, as well as the number of the hard occlusal contacts was significantly greater in the Eichner class I cases (p < 0.05) in comparison with the Eichner classes II and III. The number of the weak occlusal contacts showed no significant differences with respect to the Eichner classification (p > 0.05). There was no significant difference in the number of occlusal contacts between the appliances with RCP-ICP slide and where ICP and RCP corresponded (p > 0.05).

A total of 222 patients were studied. In a questionnaire patients graded their complete dentures of different age and quality, depending on the level of satisfaction, using the modified analogue-visual scale from 1 to 5. The dentist assessed the same dentures, as well as the denture bearing area. The patients' assessments were surprisingly high, the grades were bigger than the therapist's (p < 0.05), but in disappointed patients the grades were smaller than the therapist's (p < 0.05). It seems that the dentist is more critical in assessments than the patient. No significant difference existed between chewing and denture stability and between stability and the comfort of wearing lower full denture (p > 0.05). Unstable denture aggravates chewing and causes pain and discomfort on the bearing area. It seems that subjective factors in patients, expectations of the denture or the number of previous dentures play a role in satisfaction, not only the quality of denture bearing area and the quality of a denture.

The aim of this study was to find out patients' satisfaction with their bridges made of different materials (metal-ceramics, Au/resin, Ag-Pd/resin). One hundred and sixty four patients were examined at the Dental School, University of Zagreb, Croatia. They assessed their bridges--the overall quality, aesthetics, speech, chewing and the health of the gingiva by the scale from 1-5. The same categories were also assessed by a trained prosthodontist. The majority of the patients was really satisfied and gave the highest grades (quality, aesthetics, speech, etc.) and therefore the results were skewed and asymmetrical towards the biggest scores (biggest grades). The best gingival health was evaluated by the group of patients with ceramic crowns and bridges (p < 0.05) and the worst by the patients with Ag-Pd bridges. Speech was scored higher for the lateral than for the frontal bridges. Patients evaluated the health of the tissue surrounding their bridges, overall quality of fixed prosthodontic appliance and aesthetics with significantly higher scores than the prosthodontist (p < 0.01). The results point at a difference between the patient's and the therapist's evaluations and to the patient's insufficient care about the gingiva around the bridge abutments.

Early effect of Pd-Ag alloy on aerobic and microaerophilic flora from healthy oral cavity was studied. Normal microbial flora was sampled from saliva, dental plaque and gingival crevice from healthy individuals without any prosthodontic appliances or periodontal diseases. Such samples were inoculated into liquid media and were left in thermostat (37 degrees C) in aerobic condition. In some samples one or two sterile Pd-Ag alloy pieces were inoculated, while some samples were left without that pieces to be a control group. Both were kept in a thermostat for 24 and 48 hrs and after that were examined for bacterial dehydrogenic activity to reveal the amount of active bacteria in a sample. Dehydrogenic activity was registered after incubation of 0.1 ml of 3-phenyltetrazolynchloryde (TTC) into samples. TCC changes a colour of a liquid media because of bacterial dehydrogenic activity and therefore samples were analysed in a spectroscope. Statistical analysis revealed lower bacterial activity (lower TTC distinction) in samples with one or two Pd-Ag alloy pieces than in a control group. These results indicate the existence of initial inhibitory effect of Pd-Ag alloys on aerobic flora in the mouth, which might give space for anaerobic strains to increase ther growth. Presence of periodontal changes in a gingival crevice with Pd-Ag alloy crowns is probably due to anaerobic micro-organisms, as mostly anaerobic strains are responsible for periodontal disease.

Many authors consider that the contours and dimensions of TMJ continue to be reshaped and remodeled even after the period of growth and development is complete, in response to changing mechanical stresses under influence of aging, abrasion and the loss of the teeth. Therefore, the aim of this study was to find out if aging and the loss of teeth make any influence on TMJ. The sample consisted of 80 dry skulls and their mandibles. The following parameters were measured: 1A (AB) the distance from the lateral ending of petrotympanic fissure to the intersection of petrotympanic and petrosquamosus fissure, 1B (BC) the distances from the intersection of petrotympanic and petrosquamosus fissure to the most prominent part of the articular eminence, 1C (AC) the distance from the lateral ending of petrotympanic fissure to the most prominent part of articular eminence and 2 (h) the depth of the mandibular fossa. Measured values were analysed in connection with sex, age, the different percentage of the remaining teeth and the left or the right side. There was no significant difference at the probability level of 95%, nor for the left and the right side, neither for the different age groups, sex and the different percentage of the remaining teeth (p greater than 0.05). Still, it is obscure the existence and the changes in TMJ when the growth is completed. It is necessary to study this problem on the bigger sample and the new methods as CT and artroscopy could be helpful.

Correct determination of the occlusal plane is important for estetic, phonetic and masticatory function of the denture. As many different criterias are used in clinical practice to determine the occlusal plane on the wax rims, the aim of this study was to find the angle between the occlusal plane and the horizontal plane in the articulators with the quick mounting face bow. The measurements were made on the casts of 30 eugnath individuals with at least 28 natural teeth, mounted in S.A.M. articulator through the transfer with the Quick mounting face bow, in the position of maximum intercuspation. Measurements were made with a precise caliper and were transferred to the calibrated paper. The angles were measured between the occlusal plane and the horizontal plane. The angle is 9.42 degrees +/- 4.1 degrees in the population of this country. This result can be helpful to determine the occlusal plane or to control if the occlusal plane, determined by the other methods is in the correct position in articulator.