Search

Background In part 1 of this study it was shown that liposuctioned fat could be a sufficient source of autologous collagen for use as a filler or in reconstruction. The collagen composition in liposuctioned fat was shown to form a cross-linked helical matrix composed of types II, III, and IV. Additionally, viable adipocytes and fibroblasts among other cells were found. Objectives The purpose of this research was to study the biology of this matrix after subsequent implantation compared to Juvederm (Allergan, Parsippany, NJ) common soft tissue filler. Methods Fat was obtained from individuals undergoing routine liposuction and was processed by a two-step process to obtain a connective tissue matrix. The matrix was then cryo-frozen for a minimum of 4 weeks after which it was thawed and implanted in 46 nude mice. Juvederm Ultra was used as the control article and the animals followed for one year. Results Liposuctioned fat was obtained from 10 individuals and processed as previously described. Mice were harvested at 3, 6, 9, and 12 months and histology obtained. There were no adverse effects from either article and the bio-reactivity rating was 0. The implanted collagen compared favorably to Juvederm at all stages and was found to be replaced by new collagen and fat. Conclusions A collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat which has been processed and cryo-frozen. The material lasts at least one year and is slowly replaced by new collagenand fat. Level of Evidence 5.

The availability of computers and advances in imaging, especially over the last 10 years, have allowed the adoption of three-dimensional (3D) imaging in the office setting. The affordability and ease of use of this modality has led to its widespread implementation in diagnosis and treatment planning, teaching, and follow-up care. 3D imaging is particularly useful when the deformities are complex and involve both function and aesthetics, such as those in the dentofacial area, and for orthognathic surgery. Computer imaging involves combining images obtained from different modalities to create a virtual record of an individual. In this article, the system is described and its use in the office demonstrated. Computer imaging with simulation, and more specifically patient-specific anatomic records (PSAR), permit a more accurate analysis of the deformity as an aid to diagnosis and treatment planning. 3D imaging and computer simulation can be used effectively for the planning of office-based procedures. The technique can be used to perform virtual surgery and establish a definitive and objective treatment plan for correction of the facial deformity. In addition, patient education and follow-up can be facilitated. The end result is improved patient care and decreased expense.

Background Improved results with aesthetic fat augmentation of the face have been recently described by the concomitant use of autologous stem cells from the stromal vascular fraction (SVF). Objective There are no studies in the literature regarding facial fat augmentation results with the use of SVF using 3D computer volumetric analyses. This prospective study was thus undertaken to answer this question. Methods Fat was harvested by a standard liposuction technique for reinjection. A 50 cc aliquot of fat was also processed to obtain the SVF using a standard collagenase technique. A cell count was done using a cytometer, and the amount of injected fat and cells were recorded. The Vultus 3D photogrammetric scanning system was used to scan the face pre- and posttreatment and long-term, and volume changes were then calculated at the different time intervals. The data was then correlated to the variables. Results Ten subjects were included in the study, with an average follow-up of 12.6 months. The average amount of fat injected was 18.4 cc, of which 68% was retained. The average cell count of the SVF was 4.8 × 105. The amount of retained fat by volume was found to be positively correlated to the number of cells in the SVF. There was no correlation between the age and number of cells in the SVF. Conclusions There is a correlation between the number of cells in the SVF and the amount of fat retained. Level of Evidence 3![Graphic][1] Therapeutic [1]: /embed/inline-graphic-1.gif

Background Autologous collagen is an ideal soft tissue filler and may serve as a matrix for stem cell implantation and growth. Procurement of autologous collagen has been limited, though, secondary to a sufficient source. Liposuction is a widely performed and could be a source of autologous collagen. Objectives The amount of collagen and its composition in liposuctioned fat remains unknown. The purpose of this research was to characterize an adipose-derived tissue-based product created using ultrasonic cavitation and cryo-grinding. This study evaluated the cellular and protein composition of the final product. Methods Fat was obtained from individuals undergoing routine liposuction and was processed by a 2 step process to obtain only the connective tissue. The tissue was then evaluated by scanning electronic microscope, Western blot analysis, and flow cytometry. Results Liposuctioned fat was obtained from 10 individuals with an average of 298 mL per subject. After processing an average of 1 mL of collagen matrix was obtained from each 100 mL of fat. Significant viable cell markers were present in descending order for adipocytes > CD90+ > CD105+ > CD45+ > CD19+ > CD144+ > CD34+. Western blot analysis showed collagen type II, III, IV, and other proteins. Scanning electronic microscope study showed a regular pattern of cross-linked, helical collagen. Additionally, vital staing demonstrated that the cells were still viable after processing. Conclusions Collagen and cells can be easily obtained from liposuctioned fat by ultrasonic separation without alteration of the overall cellular composition of the tissue. Implantation results in new collagen and cellular growth. Collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat and may provide long term results. Level of evidence 5.

Introduction Airway size increases are associated with maxillomandibular advancement (MMA) surgery and improvement or elimination of obstructive sleep apnea (OSA). The 3-dimensional morphologic, volumetric, height, cross-sectional surface area, and diameter changes of the upper airway in patients with OSA after MMA, however, are not well understood. Methods Patients with moderate or severe OSA who underwent MMA surgery were evaluated by preoperative and postoperative cone-beam computed tomography scans and polysomnograms. The upper airway space was also divided into retropalatal and retroglossal spaces and was analyzed for volumetric, height, cross-sectional surface area, transverse, and anteroposterior diameter changes. Results Ten consecutive OSA patients with an average preoperative apnea/hypopnea index of 46 and treated with MMA surgery were included in this study. There were 8 men and 2 women, with an average age of 46 years and an average body mass index of 28. There was an average of a 2.5-fold increase in the total volume of the upper airway space. The retropalatal space increased by 3.5-fold. The retroglossal space increased by 1.5-fold. The greatest change in a cross-sectional area occurred in the transverse axis in both the retroglossal and retropalatal spaces. The average apnea/hypopnea index was 4 postoperatively. Conclusion MMA surgery results in a significant increase in the volume and a morphologic airway change from a round to an elliptical f shape in the upper airway space in patients with OSA. The combination of these actions reduces the collapsibility of the upper airway space, hence improving or resolving the OSA.

Objective:This study aimed to describe total volume and cross-sectional area measurement changes in obstructive sleep apnoea patients associated with a supine versus an upright position.Method:A retrospective chart review of patients who underwent cone beam computed tomography in upright and supine positions was performed, and the images were analysed.Results:Five obstructive sleep apnoea patients (all male) underwent both upright and supine cone beam computed tomography imaging. Mean age was 35.0 ± 9.3 years, mean body mass index was 28.1 ± 2.7 kg/m2 and mean apnoea–hypopnoea index was 39.3 ± 23.0 per hour. The airway was smaller when patients were in a supine compared with an upright position, as reflected by decreases in the following airway measurements: total volume; posterior nasal spine, uvula tip, retrolingual and tongue base (not significant) cross-sectional areas; and site of the minimum cross-sectional area (of the overall airway). Total airway volume decreased by 32.6 per cent and cross-sectional area measurements decreased between 32.3 and 75.9 per cent when patients were in a supine position.Conclusion:In this case series, the airway of obstructive sleep apnoea patients was significantly smaller when patients were in a supine compared with an upright position.

A B S T R A C T Objective: Describe anatomical and radiological findings in 742 patients evaluated for congenital aural atresia and microtia by a multidisciplinary team. Develop a new classification method to enhance multidisciplinary communication regarding patients with congenital aural atresia and microtia. Methods: Retrospective chart review with descriptive analysis of findings arising from the evaluation of patients with congenital atresia and microtia between January 2008 and January 2012 at a multidisciplinary tertiary referral center. Results: We developed a classification method based on the acronym HEAR MAPS (Hearing, Ear [microtia], Atresia grade, Remnant earlobe, Mandible development, Asymmetry of soft tissue, Paralysis of the facial nerve and Syndromes). We used this method to evaluate 742 consecutive congenital atresia and microtia patients between 2008 and January of 2012. Grade 3 microtia was the most common external ear malformation (76%). Pre-operative Jahrsdoerfer scale was 9 (19%), 8 (39%), 7 (19%), and 6 or less (22%). Twenty three percent of patients had varying degrees of hypoplasia of the mandible. Less than 10% of patients had an identified associated syndrome. Conclusion: Patients with congenital aural atresia and microtia often require the intervention of audiology, otology, plastic surgery, craniofacial surgery and speech and language professionals to achieve optimal functional and esthetic reconstruction. Good communication between these disciplines is essential for coordination of care. We describe our use of a new classification method that efficiently describes the physical and radiologic findings in microtia/atresia patients to improve communication amongst care providers.

Fronto-orbital advancement is a procedure commonly performed in craniofacial centers for coronal and metopic suture synostosis. Several variations of the technique have been reported.To describe our modifications to the anterior cranioplasty procedure and the results of our surgical series.Using our craniofacial database, we retrospectively analyzed the records of all patients undergoing fronto-orbital advancement for craniosynostosis. The same team of neurosurgeons and plastic surgeons performed all procedures. Demographic data, operative time, blood loss, length of stay, and clinical outcome were analyzed.Of 248 patients treated for craniosynostosis, a total of 70 patients underwent fronto-orbital advancement. Nineteen presented with metopic, 26 with unilateral coronal, 17 with bilateral coronal, and 8 with multiple synostosis. Median age at surgery was 6.5 months. Mean operative time was 210 minutes; mean blood loss was 167 mL; and length of stay was 4.5 days. A positive correlation was found between operative time and blood loss (r = 0.1, P.01) and age at surgery and blood loss (r = 0.3, P.0001). There was a minor morbidity rate of 2.9%. A good reconstruction was obtained in all patients using our en bloc fronto-orbital advancement without any midline osteotomies at a mean follow-up of 15 months.A team approach and the application of a standardized surgical technique should make it safer to operate in young children, shorten the surgical time, and lead to a reduction in blood loss. Reconstructing the frontal bone as an entire unit yielded excellent correction for coronal and metopic synostosis.

To cite this article: Hazan-Molina H, Molina-Hazan V, Schendel SA, Aizenbud D: Reliability of panoramic radiographs for the assessment of mandibular elongation after distraction osteogenesis procedures Orthod Craniofac Res 2011;14:25–32 Structured Abstract Authors – Hazan-Molina H, Molina-Hazan V, Schendel SA, Aizenbud D Objectives – To determine whether panoramic radiographs could be used for evaluation of changes in the vertical and horizontal dimensions following internal curvilinear mandibular distraction osteogenesis. Study Design – A retrospective cohort study included 25 patients who underwent bilateral mandibular distraction surgery. Three panoramic radiographs and lateral cephalograms from each patient were available: before distraction, immediately upon termination of the distraction process, and at the end of the follow-up period. The radiographs were traced by plotting Condylion, Gonion, and Menton. The linear distances between Condylion and Gonion and between Gonion and Menton were measured on each side, and the correlation was calculated. Results – No significant differences were found between the values of the linear measurements determined by lateral cephalograms and panoramic radiographs (p ≥ 0.079), excluding one measurement. The correlation test for these radiographs showed very high, positive and statistically significant correlations, for both sides of the internal mandibular distraction (r > 0.77, p ≤ 0.0001), apart from three measurements. Conclusion – Panoramic radiographs, with mandibular length (Co–Go and Go–Me) measurements, can be used as an alternative to lateral cephalograms, i.e. as a reliable tool for assessing vertical and horizontal dimensional changes resulting from internal mandibular distraction achieved by a curvilinear distractor.

BACKGROUND The mandibular internal curvilinear distractor design produces a curvilinear vector to provide ideal three-dimensional curvilinear movements compared with the limited straight unidirectional predecessor devices. In this manner, it corrects craniofacial deformities as anatomically as possible, allowing simultaneous bidirectional (rotational and translational) mandibular movement and multidirectional distraction. The aim of this study was to quantify the sagittal and vertical mandibular changes achieved through curvilinear distraction and to assess the long-term effect of this generated bone. METHODS Forty patients (20 male and 20 female), with ages ranging from 5 to 55 years, who underwent mandibular distraction from December of 1999 to August of 2007 at Lucile Packard Children's Hospital in Stanford, California, were included. Preoperatively, postoperatively, and at follow-up (at least 2 years following distraction), panoramic and lateral cephalometric radiographs were traced by plotting different skeletal landmark points and were then analyzed. RESULTS All patients tolerated the curvilinear distraction process well through completion. The average of the mandibular body elongation recorded was 8 to 9 mm and 6 to 8 mm in the panoramic and cephalometric radiographs, respectively; whereas the vertical change of the mandibular ramus achieved was 10 to 12 mm and 10 to 11 mm, respectively. The curvilinear distraction effect on the mandible was found to be significantly stable when the long-term follow-up measurements were compared with the postoperative data revealed in the panoramic and lateral cephalometric radiographs for the two dimensions. CONCLUSION The internal curvilinear device is an effective tool that achieves a stable mandibular distraction, resulting in the correction of craniofacial deformities.

Micrognathia and the associated retroposition of the tongue into the oropharynx (glossoptosis) can obstruct the upper airway, producing obstructive apnea. The primary management of respiratory compromise in patients who have micrognathia is controversial. Numerous modalities have been used, including prone positioning, nasopharyngeal airways, tongue-lip adhesion, mandibular distraction, and tracheostomy. The goal of any intervention is to relieve airway obstruction, with secondary goals reported in the literature including avoidance or early removal of tracheostomy, improvement in feeding, and accelerated growth. This review examines nonsurgical and surgical therapeutic options and their outcomes. The diagnostic and treatment algorithm employed at the senior author's institution is presented.

Purpose Advancements in computers and imaging, especially over the last 10 years, have permitted the adoption of 3-dimensional imaging protocols in the health care field. In addition, the affordability and ease of use of these modalities allow their widespread adoption and use in diagnosis and treatment planning. This is particularly important when the deformities are complex involving both function and esthetics, such as those in the dentofacial area and with orthognathic surgery. Materials and Methods Image fusion involves combining images from different imaging modalities to create a virtual record of an individual called a patient-specific anatomic reconstruction (PSAR). We describe the system and show its use in 1 case. Results Image fusion and, more specifically, PSAR permit a more accurate analysis of deformity as an aid to diagnosis and treatment planning. Conclusion Three-dimensional imaging and computer simulation can be effectively used for planning office-based procedures. The PSAR can be used to perform virtual surgery and establish a definitive and objective treatment plan for correction of a facial deformity. The end result is improved patient care and decreased expense.

BACKGROUND Mandibular distraction was proven to be a valuable tool for lengthening the hypoplastic mandible and relieving airway obstruction in infants. However, analysis of presurgical and postsurgical three-dimensional computed tomography and polysomnogram studies is lacking. The aim of this study was to describe the effect of distraction on the airway by evaluating the clinical, three-dimensional radiographic and polysomnogram studies before and after distraction. METHODS Seventeen infants with micrognathia who underwent internal curvilinear mandibular distraction from April 2005 through April 2008 at Lucile Packard Children's Hospital were included. Preoperative and postoperative computed tomography, polysomnograms, and feeding evaluations were obtained and compared after distraction. RESULTS The mean patient age before surgery was 105 days. All patients tolerated the distraction process with a mean mandibular advancement of 18.1 mm. One patient experienced a temporary marginal mandibular nerve palsy that resolved, and 1 postoperative wound infection was encountered. Preoperatively, the mean retroglossal oropharyngeal cross-sectional area was 41.53 mm. This was associated with a mean preoperative apnea-hypopnea index (AHI) of 10.57 and a minimum oxygen desaturation of 83%. After distraction, the mean airway increased to 127.77 mm. All patients had clinical improvement of their respiratory status; the mean postoperative AHI was 2.21, and the minimum oxygen desaturation was 90%. The result was a 209% cross-sectional airway increase. All patients progressed to oral feeds by 3.5 months postoperatively. CONCLUSIONS Mandibular distraction is effective at relieving anatomic airway obstruction in infants with micrognathia and obstructive sleep apnea while avoiding some previously reported associated complications.

Advances in computing over the last 10 years have rapidly improved imaging and simulation in health care. Implementation of three-dimensional protocols and image fusion techniques are moving diagnosis, treatment planning, and teaching to a next-generation paradigm. In addition, decreasing cost and increasing availability make generalized use of these techniques possible.In this article, the authors present a Web-based, integrated simulation system for craniofacial surgical planning and treatment. Image fusion technology was utilized to create a realistic virtual image that can be manipulated in real time. The resultant data can then be shared over the Internet by distantly located practitioners.Initial use of this system proved to be beneficial from a planning standpoint and to be accurate as to the reliability of landmark identification. Additional case studies are needed to further document the results of actual surgical simulation.This technology presents significant advantages in surgical planning and education, both of which can improve patient safety and outcomes.

Background: The purpose of this study was to retrospectively evaluate the accuracy and reliability of a computer simulation system that predicts the results of an internal curvilinear mandibular distractor in the treatment of hemifacial microsomia and severe mandibular retrognathia. Methods: A two-dimensional computer analysis and simulation system was developed based on cephalometric radiographs and patient photographs. The software was used to generate and superimpose digital templates, corresponding to the actual distractor and logarithmic spiral, onto the lateral cephalometric tracings. The digital distractor's template was then adjusted to fit the radiographic projection of the actual distractor on the 1-week postoperative lateral cephalograph as precisely as possible. It was then activated along the spiral growth curve template until the ideal position of the mandible was reached. This computational surgical simulation tracing was then superimposed onto the actual postdistraction lateral cephalometric radiograph and tracing. Thus, the predicted and actual mandibular distraction movements were compared. Results: In all of the cases, the computational distraction (skeletal and soft tissues) tracing fit the actual postdistraction tracing with an accuracy to within 1 mm. Conclusions: The current study demonstrated that a specific curvilinear distraction can (1) closely reproduce the natural logarithmic spiral movement of the mandibular growth, (2) be closely approximated and thus predicted by a computer simulation system, and (3) be used for correction of mandibular deformities such as hemifacial microsomia and severe mandibular retrognathia.

Summary The objective of this project was to develop a computer-based surgical simulation system for planning and performing cleft lip repair. This system allows the user to interact with a virtual patient to perform the traditional steps of cleft-lip repair (rotation-advancement technique). Materials and methods The system interfaces to force-feedback (haptic) devices to track the user's motion and provide feedback during the procedure, while performing real-time soft-tissue simulation. An 11-day-old unilateral cleft lip, alveolus and palate patient was previously CT scanned for ancillary diagnostic purposes using standard imaging protocols and 1 mm slices. High-resolution 3D meshes were automatically generated from this data using the ROVE software developed in-house. The resulting 3D meshes of bone and soft tissue were instilled with physical properties of soft tissues for purposes of simulation. Once these preprocessing steps were completed, the patient's bone and soft tissue data are presented on the computer screen in stereo and the user can freely view, rotate, and otherwise interact with the patient's data in real time. The user is prompted to select anatomical landmarks on the patient's data for preoperative planning purposes, then their locations are compared against that of a ‘gold standard’ and a score, derived from their deviation from that standard and time required, is generated. The user can then move a haptic stylus and guide the motion of the virtual cutting tool. The soft tissues can thus be incised using this virtual cutting tool, moved using virtual forceps, and fused in order to perform any of the major procedures for cleft lip repair. Real-time soft tissue deformation of the mesh realistically simulates normal tissues and haptic-rate ( > 1 k Hz ) force-feedback is provided. The surgical result of the procedure can then be immediately visualized and the entire training process can be repeated at will. A short evaluation study was also performed. Two groups (non-medical and plastic surgery residents) of six persons each performed the anatomical marking task of the simulator four times. Results Results showed that the plastic surgery residents scored consistently better than the persons without medical background. Every person's score increased with practice, and the length of time needed to complete the 11 markings decreased. The data was compiled and showed which specific markers consistently took users the longest to identify as well as which locations were hardest to accurately mark. Conclusion These findings suggest that the simulator is a valuable training tool, giving residents a way to practice anatomical identification for cleft lip surgery without the risks associated with training on a live patient. Educators can also use the simulator to examine which markers are consistently problematic, and modify their training to address these needs.

Dentofacial deformities are traditionally treated by maxillary and mandibular osteotomies conducted separately or simultaneously. Recently, distraction osteogenesis has become an irreplaceable part of the surgical armamentarium, for its ability to induce new bone formation between the surfaces of bone segments that are gradually separated by incremental traction, along with a simultaneous expansion of the surrounding soft-tissue envelope. The aim of this article is to describe a combined surgical technique consisting of simultaneous maxillary Le Fort I advancement and mandibular surgical repositioning by means of bilateral sagittal split osteotomy with a curvilinear distractor based on a preliminary computerized presurgical prediction.

Objective A number of surgical techniques are utilized to correct the unilateral cleft lip, including variations of the rotation-advancement technique. This attests to the variability of the original deformity and the esthetic and functional results from any one technique, especially those based on traditional geometric rearrangement of the skin and associated tissues. Results Most recent advances in cleft lip repair have occurred in two main areas. The morphological result has been improved by functional muscular reconstruction of the lip with or without orthopedic molding. Early correction of the nasal deformity has also been readvocated based on newer principles with excellent results demonstrated. Conclusion Further work continues in these areas and improved outcomes will continue to be seen along with a clearer understanding of surgical affects on growth and development.

The purpose of this review was to evaluate the clinical outcomes regarding velopharyngeal insufficiency and fistulization in patients with cleft palate who underwent primary repair with the one-stage Delaire palatoplasty. All patients who had a primary Delaire-type palatoplasty performed by the senior surgeon over a 10-year period (1988 to 1998) were studied. During this period, each consecutive patient with an open palatal cleft underwent the same type of repair by the same surgeon. Speech quality and velopharyngeal competence as determined by a single speech pathologist were recorded. A total of 95 patients were included in this series. The average length of follow-up was 31 months (range, 1 to 118 months). Average age at time of surgery was 13.3 months (range, 6 to 180 months). Thirty-one patients (32.6 percent) had significant associated anomalies. The average length of hospital stay was 1.9 days (range, 1 to 8 days) with a trend in recent years toward discharge on postoperative day 1. There were no intraoperative complications, either surgical or anesthetic. Three patients (3.2 percent) developed palatal fistula; none of them required repair. Six patients (6.3 percent) had velopharyngeal incompetence. In patients with more than 1 year of follow-up, the incidence of velopharyngeal incompetence was 9.2 percent (6 of 65). The incidence of fistula after the Delaire palatoplasty was lower than usually reported. The incidence of velopharyngeal incompetence requiring pharyngoplasty was equal to or lower than that seen after other types of palatoplasty, suggesting superior soft-palate muscle function attributable to approximation of the musculus uvulae. The Delaire palatoplasty results in a functional palate with low risk for fistula formation and velopharyngeal incompetence.

Adverse outcomes in orthognathic surgery include both functional and aesthetic components that frequently coexist. Reasons for this occurrence are multifactorial and can be classified in broad categories of diagnosis, treatment planning, technical execution, and unpreventable outcomes. Management of the residual deformities is both functional and aesthetic as based on correctly delineating the problem and its cause.

Advancements in computers, prototyping, and imaging, especially over the last 10 years, have permitted the adoption of three-dimensional imaging protocols in the health care field. In this article, the authors present an integrated simulation system for craniofacial surgical planning and treatment. Image fusion technology, which involves combining different imaging modalities, was utilized to create a realistic prototype and virtual image that can be manipulated in real time. The resultant data can then be shared over the Internet with distantly located practitioners.

Craniosynostosis following ventricular shunting procedures for hydrocephalus has become a recognized complication of shunting procedures. Secondary synostosis results from a decrease in intracranial volume leading to collapse of the cranial vault. Since this represents a distinct etiopathogenesis different from that typically involved, the surgical approach should be altered. Eight patients with secondary scaphocephaly underwent surgical reconstruction. The clinical data and radiographic studies were reviewed for these patients. The surgical approach consisted of sagittal or parasagittal strip craniectomies, lateral osteotomies with bone-flap expansion, occipital and frontal remodeling as needed, and the application of rigid fixation to maintain contour and prevent recurrent collapse of the cranial vault. Patient follow-up ranged from 3 to 37 months. Five of these patients were premature infants, an association not previously recognized in the literature. Satisfactory results were obtained in all patients. Keeping the craniectomy sites parent and achieving a more normal cranial contour through cranial remodeling have provided good results in this population.

Recent developments in surgery and basic science research offer aesthetic surgeons the prospect of scarless repair. Studies in fetal wound healing provide both cellular and molecular models of optimal tissue healing without scar formation. Furthermore, craniofacial surgeons may one day operate on cleft lip, cleft palate, and other congenital malformations in utero. Cytokine research has begun to unravel possibilities for modulating the wound-healing inflammatory response in hopes of limiting scar formation. This article presents research on these developments and comments on their possible applications to aesthetic surgery.

Purpose The purpose of this study was to measure the accuracy of 3D computer simulation of soft tissue changes after orthognathic surgery. Materials and Methods Consecutive patients who underwent orthognathic surgery were studied by photogrammetric facial scanning and cone-beam computed tomography before and after surgery. The photogrammetric scan was then fused to the cone-beam computed tomogram, creating a patient-specific image. The surgery was simulated in 3D form and the simulated soft tissue face was compared with the actual facial scan obtained 6 months postoperatively. Absolute millimeter differences between the simulated and actual postoperative changes in selected cephalometric skin markings were computed. Results The study was composed of 23 subjects (mean age, 31 yr; 13 women and 10 men). Eighteen different cephalometric landmarks were measured (total, 28). For 15 landmarks, the difference between actual and simulated measurements was smaller than 0.5 mm. Only 3 landmarks had a difference of 0.5 mm, and these were in the region of the labial landmarks. Conclusion Based on the present study, 3-dimensional computer surgical simulation of the soft tissue of the face for routine orthognathic surgery is accurate enough for routine clinical use.

Obstructive sleep apnea (OSA) is a chronic, progressive, and potentially life-threatening disorder that can be effectively treated with surgery. It is also a condition that orthodontists see in their offices every day; thus, they are ideally suited to diagnose and treat it. OSA is related to an anatomic obstruction of the upper airway; surgical correction of the obstruction is effective and definitive, and should be considered for appropriate patients with mild, moderate, or severe OSA. OSA is a multifactorial condition, and diagnosis and treatment must be individualized, with multidisciplinary management. The definitive diagnosis and treatment plan is formulated after a comprehensive medical and dental history and examination. Adjunctive diagnostic studies such as cone-beam computerized tomographic imaging for airway analysis, fiber-optic nasopharyngoscopy, polysomnography, and 3-dimensional cephalometrics are included in the workup. OSAoccursduringsleepasaresultofanobstruction or partial collapse of the upper airway. Signs and symptoms include tiredness or sleepiness during the day, memory loss, irritability, depression, decreased libido, and headache. If OSA is not treated, it can cause diabetes, hypertension, heart disease, and sudden death while asleep. 1 Exacerbating factors include a high body mass index (.34). 2 Continuous positive airway pressure (CPAP) is currently considered the gold standard for the treatment of OSA. 3,4 Positive airway pressure can be divided into continuous (CPAP), bilevel, and auto titrating modes, through a nasal, oral, or oronasal interface during sleep. Unfortunately, compliance with CPAP is variable for numerous reasons including social stigma, feelings of claustrophobia, and complaints of inability to sleep peacefully. 5 Side effects include nasal congestion, thickening of the soft tissues with prolonged use, skin ulceration, and eye irritation. 6 CPAP failure because of poor compliance has been reported to be as high as 25% to 50%. 7,8 OSA is most severe during deeper sleep; thus, patients using CPAP for less the 4 hours a night still suffer from the consequences of OSA.

Bioabsorbable fixation systems have been widely employed in pediatric patients for cranial reconstruction, obviating the complications of hardware migration and imaging artifact occurring with metallic implants. Recent concern over complications unique to bioabsorbable materials, such as inflammatory reaction and incomplete resorption, necessitates additional conclusive studies to further validate their use in pediatric neurosurgery and craniofacial surgery. Likewise, long-term follow-up in this clinical cohort has not previously been described.We included consecutive pediatric patients under the age of 2, from Lucile Packard Children's Hospital, who underwent cranial vault reconstruction with the use of a bioabsorbable fixation system between 2003 and 2010. Hospital records were queried for patient characteristics, intraoperative data, and postoperative complications.Ninety-five patients with the following preoperative pathologies were analyzed: craniosynostosis (87), cloverleaf skull (5), frontonasal dysplasia (1), and frontonasal encephalocele (2). Median age was 6 months (range 1-24 months). Average case duration was 204 minutes (range 40-392 min), with median of 154 mL blood loss (range 30-500 mL). Ninety-three percent of patients had 1-4 plates implanted with 48% receiving three plates. The median number of screws used was 59 (range 0-130). The median length of hospital stay was 4 days (range 2-127 days) with an average follow-up of 22 months (five postoperative visits). The complications related to hardware implantation included swelling (1%) and broken hardware (1%), the latter of which required reoperation.The bioabsorbable fixation systems for cranial vault reconstruction in children less than 2 years of age is safe with tolerable morbidity rates.

Research has clarified the abnormal insertions and orientations of the involved musculature in cleft palate. However, little is known about the physiologic aspects of these muscles, specifically from a histochemical perspective. In this study, 30 muscle specimens were removed from the palatal cleft margin in patients undergoing primary palatoplasty. Nine patients had combined cleft lip and palate deformity, and seven had an isolated cleft palate. Biopsies were taken from the area of the musculus uvulus in all specimens and examined by histochemical techniques. The percentage of type 1 and type 2 fibers was different in isolated cleft palate as compared with cleft lip and palate specimens, being, respectively, 56.7 percent type 1 and 43.3 percent type 2 and 62.0 percent type 1 and 38.0 percent type 2 fibers. This is the opposite ratio from other facial muscles but is in line with the literature regarding normal palatal muscle. Isolated cleft palate muscle fibers also were minimally decreased in diameter as compared with normal facial muscle. Fiber diameters of the combined cleft lip and palate muscles were severely decreased in size compared with those muscles found in the cleft lip. Abnormal mitochondrial accumulations also were found in cleft lip and palate muscle specimens but not in isolated cleft palate muscle specimens. We consider the decrease in muscle diameter found in isolated cleft palate to be secondary to functional atrophy, while that in the cleft lip and palate specimens is secondary to a primary hypoplasia together with a functional atrophy.(ABSTRACT TRUNCATED AT 250 WORDS)

Internal curvilinear distraction is successful in achieving clinically significant distraction with stable occlusion in our patient population of infants, adolescents, and adults. When distracting the mandible, the curve of the distractor, the position of the distractor, and the osteotomy site are accountable for the final result. The curved distractor can mimic part of the natural logarithmic growth of the maxillomandibular complex. In addition, the result is predictable based on this design and the internal nature of the distractor, which can be left in place longer than other distractor types. Distraction can be combined with orthognathic surgery in certain cases resulting in increased benefit. This new procedure is called distraction orthognathics.

This article presents a comprehensive overview of generating a digital Patient-Specific Anatomic Reconstruction (PSAR) model of the craniofacial complex as the foundation for a more objective surgical planning platform. The technique explores fusing the patient's 3D radiograph with the corresponding high-precision 3D surface image within a biomechanical context. As taking 3D radiographs has been common practice for many years, this article describes various approaches to 3D surface imaging and the importance of achieving high-precision anatomical results to simulate surgical outcomes that can be measured and quantified. With the PSAR model readily available for facial assessment and virtual surgery, the advantages of this surgical planning technique are discussed.

Purpose The present study was undertaken to investigate the changes in the normal upper airway during growth and development using 3-dimensional computer analysis from cone-beam computed tomography (CBCT) data to provide a normative reference. Methods The airway size and respiratory mode are known to have a relationship to facial morphology and the development of a malocclusion. The use of CBCT, 3-dimensional imaging, and automated computer analysis in treatment planning allows the upper airway to be precisely evaluated. In the present study, we evaluated the growth of the airway using 3-dimensional analysis and CBCT data from age 6 through old age, in 1300 normal individuals. Results The airway size and length increase until age 20 at which time a variable period of stability occurs. Next, the airway at first decreases slowly in size and then, after age 40, more rapidly. Normative data are provided in the present study for age groups from 6 to 60 years in relation to the airway total volume, smallest cross-sectional area and vertical length of the airway. Conclusions This 3-dimensional data of the upper airway will provide a normative reference as an aid in the early understanding of respiration and dentofacial anatomy, which will help in early treatment planning.

Surgical correction of obstructive sleep apnea (OSA) syndrome involves understanding a number of parameters, of which the 3-dimensional airway anatomy is important. Visualization of the upper airway based on cone beam computed tomography scans and automated computer analysis is an aid in understanding normal and abnormal airway conditions and their response to surgery. The goal of surgical treatment of OSA syndrome is to enlarge the velo-oropharyngeal airway by anterior/lateral displacement of the soft tissues and musculature by maxillary, mandibular, and possibly, genioglossus advancement. Knowledge of the specific airway obstruction and characteristics based on 3-dimensional studies permits a directed surgical treatment plan that can successfully address the area or areas of airway obstruction. The end occlusal result can be improved when orthodontic treatment is combined with the surgical plan. The individual with OSA, though, is more complicated than the usual orthognathic patient, and both the medical condition and treatment length need to be judiciously managed when OSA and associated conditions are present. The perioperative management of the patient with OSA is more complex and the margin for error is reduced, and this needs to be taken into consideration and the care altered as indicated.

We present a series of 24 consecutive cleft lip and palate patients aged 16 to 46 years (mean age 27 years) who underwent Le Fort I maxillary advancement by the senior author over the past 8 years. Two groups, one of 12 patients with wire fixation and one of 12 patients with miniplate fixation, were evaluated. Each group had 10 unilateral and 2 bilateral clefts. All patients were grafted with autogenous bone (8 cranial, 14 iliac, and 2 mandibular). Horizontal advancement was 3 mm to 2 cm (with a mean of 7.8 mm). Vertical movement ranged from a shortening of 5 mm to a lengthening of 1.3 cm (mean 2.3 mm of lengthening). The amount and timing of relapse were compared in both the horizontal and vertical dimensions. The plated group was more stable in both the horizontal and vertical dimensions (p < 0.05). No significant skeletal relapses occurred after the first year. Statistically significant dental relapse occurred only in the wired group. Three patients developed transverse collapse of the small maxillary cleft segment, and four developed incisor angulation to compensate for maxillary skeletal relapse. The presence of a pharyngeal flap at the time of advancement appeared to increase relapse in both horizontal and vertical dimensions (p < 0.03), but there were too few patients (7 of 24) with pharyngeal flaps to prove this conclusively. We also concluded that pterygomandibular grafting is not necessary to achieve excellent results using miniplate fixation; autogenous grafting of the anterior maxillary osteotomy alone provides the necessary stability.