820 results on '"Stepanov, G. V."'
Search Results
2. Elastic Properties of a Magnetoactive Elastomer
3. Influence of Distribution Anisotropy and Particle Shape on Magnetorheological Properties of Magnetoactive Elastomers
4. Mechanical Properties of Anisotropic Magnetic Elastomers
5. Anomalous transient conductivity of magnetic elastomer under the action of strain and magnetic field.
6. Electroconducting Filling Particles with Magnetoresistance
7. Magnetoresistive and magnetocapacitive effects in magnetic elastomers
8. Effect of a Low-Frequency Magnetic Field on the Release of Heat by Magnetic Nanoparticles of Different Shapes
9. Characterization of Aluminum Foam Impact Response
10. Thermal Magnetic Effect of Needle-Shaped Gamma-Iron Oxide Nanoparticles in Low-Frequency Fields
11. Investigation of the Interaction between Magnetoactive Elastomers and Hard Magnetic Composite Seals for a Magnetic Retina Fixator
12. Dynamic Modeling of an Active Damper
13. Research on the Dynamic Characteristics of a Controlled Magnetorheological Elastometer Damper
14. Pulse Current Effect on the Stress-Strain State in a Cracked Steel Strip
15. Studies on silicone anisotropic magnetoactive composites
16. Silicone elastomers deformation peculiarities under compression
17. Homolytic Decomposition of Sulfonyl Chlorides
18. Electrophysical and acoustic properties of magnetic elastomers structured by an external magnetic field
19. Polymer composites based on polyvinyl chloride
20. Liquid–gas critical phenomena in n-hexane in the presence of the liquid phase of water
21. Thermoplastic elastomers based on polycaprolactam
22. Isochoric heat capacity of an n-hexane + water system
23. Anisotropic magnetoactive composites features of the properties.
24. Magnetoactive elastomer based on magnetically hard filler: Synthesis and study of viscoelastic and damping properties
25. Durability of a Stress Concentrator-Containing Cantilever Beam Under Cyclic Loading in Bending
26. Dynamic properties of magnetically active elastomer composites in laboratory tests
27. Assessment of the Kinetics of Crack Propagation in the Header-Steam Generator Connector Welded Joint NO. 111 by Plasticity Resource
28. Composition of extract of the Juniperus oblonga M. Bieb. Fruits obtained by supercritical CO2 extraction
29. Magnetoresistive Effect in Magnetoactive Elastomers
30. Effect of Pulsed Magnetic Field Treatment on the Fracture Resistance of a Cracked Specimen
31. Pulse electric current effect on mechanical properties of titanium aluminide produced by the self-propagating high-temperature synthesis technique
32. Assessment of J-integral near the tip of a circumferential edge crack in a thick-walled pipe on rapid cooling of its inner surface
33. Effect of D16T alloy grain sizes on its deformation inhomogeneity under static and dynamic loading
34. Behavior of metals at high-rate strains and wave generation in explosion welding
35. Effect of transient heating of the outer surface of a radial crack-containing ring specimen on its brittle fracture resistance
36. Experimental Study of the Isochoric Heat Capacity of Diethyl Ether (DEE) in the Critical and Supercritical Regions
37. Effect of a pulsed electromagnetic field on stress relaxation in concentrator-containing flat specimens
38. Evaluation of residual stresses in carbon/carbon composites components joined to copper before and after pulse electromagnetic treatment
39. Redistribution of residual welding stresses in pulsed electromagnetic treatment
40. Experimental Study of the Thermodynamic Properties of Diethyl Ether (DEE) at Saturation
41. Low-frequency rheology of magnetically controlled elastomers with isotropic structure
42. Modeling of crack propagation kinetics
43. Effect of the loading rate on the strength of self-bonded silicon carbide ceramic materials
44. Evaluation of the residual stresses in the welded joint of the header with a connecting pipe of a steam generator after additional thermomechanical treatment
45. Electric pulse current effect on stress-strain state in the notch vicinity in a cantilever beam under cyclic bending
46. A model approach to the thermodynamics of microemulsion systems: Estimation of adequacy of the two-phase model of microemulsions
47. Influence of the fillers in a catalytic system based on SIEL compound
48. The effect of the pulse electric current treatment on residual stresses arising in grinding
49. Experimental Study of the Critical Behavior of the Isochoric Heat Capacity of Aqueous Ammonia Mixture
50. Pulse current treatment effect on the strength of reinforcing steel and its weld joint under impact loading
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.