Search

One challenge in central hemodynamic monitoring based on electrical impedance tomography (EIT) is to robustly detect ventricular signal components and the corresponding EIT image region without external monitoring information. Current stimulation and voltage measurement of EIT were simulated with finite element porcine torso models in presence of a multitude of thoracic blood volume shifts. The simulated measurement data was examined for linear dependence on changes in stroke volume. Based on the results the EIT measurement information regarding stroke volume changes is sparse

The indicator dilution method (IDM) is one approach to measure pulmonary perfusion using Electrical Impedance Tomography (EIT). To be able to calculate perfusion parameters and to increase robustnes, it is necessary to approximate and then to separate the components of the measured signals. The component referring to the passage of the injected bolus through the pixels can be modeled as a gamma variate function, its parameters are often determined using nonlinear optimization algorithms. In this paper, we introduce a linear approach that enables higher robustnes and faster computation, and compare the linear and nonlinear fitting approach on data of an animal study.

Electrical Impedance Tomography (EIT) is a clinically used tool for bed-side monitoring of ventilation. Previous work also showed a high potential for lung perfusion monitoring with indicator-enhanced EIT. However, many research questions have yet to be answered before it can be broadly applied in clinical everyday life. The goal of this work is to evaluate a new method to improve EIT perfusion measurements. Pulmonary hemodynamic transfer functions were estimated using regularized deconvolution with Tikhonov regularization to estimate spatial perfusion parameters. The final comparison between EIT images and PET scans showed a median correlation of 0.897 for the images which were reconstructed using the regularized deconvolution. In comparison the previously used maximum slope method led to a median correlation of 0.868.

In this study a physiological closed-loop system for arterial CO2 partial pressure control was designed and comprehensively tested using a set of models of the respiratory CO2 gas exchange. The underlying preclinical data were collected from 12 pigs in presence of severe changes in hemodynamic and pulmonary condition. A minimally complex nonlinear state space model of CO2 gas exchange was identified post hoc in different lung conditions. The control variable was measured noninvasively using the endtidal CO2 partial pressure. For the simulation study the output signal of the controller was defined as the alveolar minute volume set value of an underlying adaptive lung protective ventilation mode. A linearisation of the two-compartment CO2 gas exchange model was used for the design of a model predictive controller (MPC). It was augmented by a tube based controller suppressing prediction errors due to model uncertainties. The controller was subject to comparative testing in interaction with each of the CO2 gas exchange models previously identified on the preclinical study data. The performance was evaluated for the system response towards the following five tests in comparison to a PID controller: recruitment maneuver, PEEP titration maneuver, stepwise change in the CO2 production, breath-hold maneuver and a step in the reference signal. A root mean square error of 2.69 mmHg between arterial CO2 partial pressure and the reference signal was achieved throughout the trial. The reference-variable response of the model predictive controller was superior regarding overshoot and settling time.

Eikonal models are useful to compute approximate solutions of cardiac excitation propagation in a computationally efficient way. In this work the underlying conduction velocities for different cell types were computed solving the classical bidomain model equations for planar wavefront propagation. It was further investigated how changes in the conductivity tensors within the bidomain model analytically correspond to changes in the conduction velocity. The error in the presence of local front curvature for the derived eikonal model parametrization were analyzed. The conduction velocity simulated based on the bidomain model was overestimated by a maximum of 10%.

In this study a physiological closed-loop system for arterial CO2 partial pressure control was designed and comprehensively tested using a set of models of the respiratory CO2 gas exchange. The underlying preclinical data were collected from 12 pigs in presence of severe changes in hemodynamic and pulmonary condition. A minimally complex nonlinear state space model of CO2 gas exchange was identified post hoc in different lung conditions. The control variable was measured noninvasively using the endtidal CO2 partial pressure. For the simulation study the output signal of the controller was defined as the alveolar minute volume set value of an underlying adaptive lung protective ventilation mode. A linearisation of the two-compartment CO2 gas exchange model was used for the design of a model predictive controller (MPC). It was augmented by a tube based controller suppressing prediction errors due to model uncertainties. The controller was subject to comparative testing in interaction with each of the CO2 gas exchange models previously identified on the preclinical study data. The performance was evaluated for the system response towards the following five tests in comparison to a PID controller: recruitment maneuver, PEEP titration maneuver, stepwise change in the CO2 production, breath-hold maneuver and a step in the reference signal. A root mean square error of 2.69 mmHg between arterial CO2 partial pressure and the reference signal was achieved throughout the trial. The reference-variable response of the model predictive controller was superior regarding overshoot and settling time. [ABSTRACT FROM AUTHOR]

Arterial blood pressure is one of the most often measured vital parameters in clinical practice. State-of-the-art noninvasive ABP measurement technologies have noticeable limitations and are mainly based on uncomfortable techniques of complete or partial arterial occlusion by cuffs. Most commonplace devices provide only intermittent measurements, and continuous systems are bulky and difficult to apply correctly for nonprofessionals. Continuous cuffless ABP measurements are still an unmet clinical need and a topic of ongoing research, with only few commercially available devices. This paper discusses surrogate-based noninvasive blood pressure measurement techniques. It covers measurement methods of continuously and noninvasively inferring BP from surrogate signals without applying external pressures, except for reference or initialization purposes. The BP is estimated by processing signal features, so called surrogates, which are modulated by variations of BP. Discussed techniques include well-known approaches such as pulse transit time and pulse arrival time techniques, pulse wave analysis or combinations thereof. Despite a long research history, these methods have not found widespread use in clinical and ambulatory practice, in part due to technical limitations and the lack of a standardized regulatory framework. This work summarizes findings from an invited workshop of experts in the fields covering clinical expertise, engineering aspects, commercialization and standardization issues. The goal is to provide an application driven outlook, starting with clinical needs, and extending to technical actuality. It provides an outline of recommended research directions and includes a detailed overview of clinical use case scenarios for these technologies, opportunities, and limitations., (© 2021 Walter de Gruyter GmbH, Berlin/Boston.)