Search

The modernization, efficiency, and decarbonization of the energy supply systems are among the new challenges to be faced in the coming decades to achieve the targets and objectives dictated by European strategic policies. Despite the countless benefits related to renewable energy sources (RES) integration, this brings key challenges to the power system, such as the risk of imbalance between energy generation and demand, sudden changes in flows in transmission lines with a need for expensive and time-consuming upgrades, and the withdrawal of conventional generation systems with consequent demands for new solutions and innovation to support grid services. A potential solution to limit the huge intermittence and fluctuation in power generation from RES is Concentrated Solar Power (CSP) technology integrated with thermal energy storage. The aim of this paper is to discuss the potential benefits related to the use of CSP technology by presenting innovative industrial solutions developed in the Italian SOLARGRID Project, namely the hybridization of CSP–PV systems and the solar thermo-electric system developed by MAGALDI, the parabolic trough collector of Eni, and the new linear Fresnel reflector configuration of IDEA S.r.l. These plant and component solutions are developed for improving the technical performance of CSP technology and reducing the levelized cost of electricity, thereby fostering an effective and massive deployment and encouraging the creation of new business models.

Nowadays the design of large-scale structures can be effectively improved by the adoption of numerical models. Even if experimental tests still play a fundamental role, a methodological approach that combines experimental testing and modelling technique can significantly improve the understanding of the matter. This, in fact, would result in a more reliable optimization process, drastically reducing efforts and uncertainties towards the implementation of the final product. The present work deals with the development of a finite element model for the analysis of a full-scale prototype of an innovative parabolic trough collector. The collector is analysed under several load conditions in order to evaluate its structural behaviour. Each load configuration is also numerically reproduced. Moreover, it is demonstrated that the model is capable of reproducing both the global (stiffness) and local (strain state) behaviour of the structure. Specifically, the comparison between experimental data and numerical results show a good agreement for the global parameter torsional stiffness. Local strain values are also well reproduced in high-stressed zone. Thus, the model can be used as a reliable “virtual tool” for designers to evaluate the suitability of layout modifications, thereby replacing and reducing the amount of commonly needed experimental tests and, consequently, reducing time and costs. Finally, an example of the potentiality of the finite element model adopted for a computer-aided engineering approach is shown to determine the most promising solution for increasing the torsional stiffness of the trough, while simultaneously limiting the required experimental tests.

In concentrated solar power technology, the precise shape of the reflective surfaces is crucial for efficiency. Considering the geometry and size of a parabolic trough collector, measuring the actual shape is not trivial and some techniques can only be adopted during the assembly operations, evaluating only the manufacturing and alignment processes. The method proposed and tested in this work exploits a laser scanner-based three-dimensional digitization technique that can be used without any marker or other tools, and is attached to the structure. This technique is particularly suitable for assessing the behavior and the optical efficiency of the collectors under load and for validating a finite element model of the structure. The method defines the shape of the parabolic surface by collecting a 3D point cloud of the parabolic surface using a laser scanner. The measured form can then be compared with the ideal shape obtained from a finite element analysis of the structure subject to the gravity field. The comparison can also be performed when the collector is loaded by known forces or torques, with the finite element model reproducing the actual loading scenario. The object of the case study of this work was a 12 m wide full-scale prototype trough collector manufactured at the Politecnico di Milano. The uncertainty of the 3D measurements, acquiring twelve images in different positions, was verified to be less than 3.6 mm.

In the present work an experimental program aimed at assessing the mechanical behavior of an innovative parabolic solar trough is presented. More specifically, a lightweight and low-cost collector making large use of adhesive joints, which can be easily assembled on-site, still performing at a high efficiency, was designed. Static and fatigue tests were performed on a full-scale prototype of the collector in the pre-production stage. The tests included differential torsion, concentrated and distributed bending, and distributed load (wind effect). During the tests, a network of strain gauges was placed in the most critical locations to measure the strain field, while laser sensors and cable transducers were placed in strategic positions to measure the displacements. The results demonstrate the strengths of the innovative parabolic trough collector and support the assessment of its structural integrity.