Search

Psoriatic arthritis is defined as chronic inflammatory arthritis associated with psoriasis. The current data regarding gender differences in clinical manifestation and therapeutic outcomes of psoriatic arthritis are limited. Generally, men show a peripheral disease manifestation, while women have an axial distribution of the lesions. If we look at temporomandibular joint (TMJ) involvement, epidemiological data on the involvement of the TMJ are hard to find. Few studies on therapeutic management and the related impact on the quality of life are reported in the literature. Given the morpho-functional peculiarities of the TMJ and the different pain burdens between male and female genders, when manifestation of psoriatic arthritis occurs, clinicians should face it using a multidisciplinary approach for a correct diagnosis and successful treatment. This review aims to examine the diagnostic signs of psoriatic arthritis in the TMJ, the eventual variations of this disease in male and female patients, and the therapeutical strategies. The coordination of different specialties is fundamental to the remission of clinical symptoms and lesion regression.

Background and Objectives: The use of biomaterials in dentistry is extremely common. From a commercial perspective, different types of osteoconductive and osteoinductive biomaterials are available to clinicians. In the field of osteoconductive materials, clinicians have biomaterials made of heterologous bones at their disposal, including biomaterials of bovine, porcine, and equine origins, and biomaterials of natural origin, such as corals and hydroxyapatites. In recent years, it has become possible to synthesize nano-Ha and produce scaffolds using digital information. Although a large variety of biomaterials has been produced, there is no scientific evidence that proves their absolute indispensability in terms of the preservation of postextraction sites or in the execution of guided bone regeneration. While there is no scientific evidence showing that one material is better than another, there is evidence suggesting that several products have better in situ permanence. This article describes a preliminary study to evaluate the histological results, ISQ values, and prevalence of nano-HA. Materials and Methods: In this study, we planned to use a new biomaterial based on nanohydroxyapatite for implantation at one postextraction site; the nano-HA in this study was NuvaBONE (Overmed, Buccinasco, Milano, Italy). This is a synthetic bone graft substitute that is based on nanostructured biomimetic hydroxyapatite for application in oral–maxillofacial surgery, orthopedics, traumatology, spine surgery, and neurosurgery. In our pilot case, a patient with a hopeless tooth underwent extraction, and the large defect remaining after the removal of the tooth was filled with nano-HA to restore the volume. Twelve months later, the patient was booked for implant surgery to replace the missing tooth. At the time of the surgery, a biopsy of the regenerated tissue was taken using a trephine of 4 mm in the inner side and 8 mm deep. Results: The histological results of the biopsy showed abundant bone formation, high values of ISQ increasing from the insertion to the prosthetic phase, and a good reorganization of hydroxyapatite granules during resorption. The implant is in good function, and the replaced tooth shows good esthetics. Conclusions: The good results of this pilot case indicate starting the next Multicentric study to have more and clearer information about this nanohydroxyapatite (NH) compared with control sites.

In this manuscript, the authors propose a new technique for inserting implants immediately into the sockets corresponding to the lower first molars and, in any case, in the sockets in which the alveolar septum is still present. Immediate post-extraction implants are a widely discussed topic in the literature. Most authors currently consider the insertion of implants immediately after extraction less useful in terms of the procedure’s questionable benefits in maintaining the height of the alveolar bone and more useful in terms of lessening patients’ discomfort. Due to the anatomy of the post-extraction socket and its traditionally cylindrical geometry, this procedure is not always possible.: Next-generation REX-type blade implants were used via their insertion into the septum accompanied by a cortical lamina for periosteal inhibition without filling any of the alveoli.: In the 20 patients treated, the REX implant proved to be stable and surrounded by newly formed bone at the 18-month follow-up. This simple, easily employable technique allows an implant to be inserted immediately after extraction and in the same surgical session, with good patient compliance and good preservation of the alveolus due to the facilitation of periosteal inhibition. The excellent clinical results obtained with the use of a blade implant in the posterior sectors suggest that it is possible to reduce surgical sessions even in conditions of post-extraction sockets whose septum alone can ensure the primary stability essential for osseointegration. The use of a larger number of patients will also provide us with significant statistical results in support of this preliminary clinical work. New clinical studies are needed to understand the true potential of this method for application in daily clinical practice.

Background: Alveolar socket preservation is a topic of serious interest, and researchers have investigated this problem quite extensively. In terms of aesthetics, it is very important to avoid bone resorption if the clinician decides to insert the implant immediately after the extraction. Recently, a new approach utilizing a barrier external to the socket has been developed, which has advanced the evolution of this technique. Immediate implants have also created some difficulty when re-evaluated in long-term follow-up, especially when an aesthetic result is part of the goal of the procedure. Methods: The modified periosteal inhibition (MPI) technique, which has shown interesting outcomes, is evaluated in this paper on a large group of patients. In this case series, among 14 patients, 11 received immediate implants using the MPI technique and immediate provisionalization, and 3 received immediate implants using the MPI technique and customized healing abutment. All patients showed ridge preservation to different degrees, ranging from 0.02 to 1.17 mm, with an average gain of 0.51 mm. Results: all of the 14 patients maintained the original ridge shape, and 1 showed an increase in bucco-lingual size. Conclusions: This case series confirms the promising information reported in earlier studies on this technique. Larger samples will be necessary to confirm the predictability of this new approach.

Background: Reverse engineering (RE) or back engineering is a process that analyzes a physical object to obtain the primary data of the same project. RE technologies have different applications in industrial settings and productive chains; however, with the advent of digital technologies in dentistry and orthodontic fields, they are involved in the new diagnostic and clinical digital workflow. For example, 3D model scanning, 3D facial scanning, models superimposition, digital orthodontic setup, anatomical volumetric assessment, soft tissue analysis, orthodontic digital guided systems, and prototyped orthodontic appliances represent a few examples of the application of RE in orthodontics. Moreover, clinicians can manipulate the data derived from original digital file to enhance diagnosis and communication with other clinicians and dental technicians; however, RE and digital technologies systems are not exempt from shortcomings, including costs and knowledge curve. In this regard, the aim of the present manuscript was to describe the use of reverse engineering technologies in modern digital orthodontics and provide helpful information for those specialists who are at the beginning of the transition from analogic to digital orthodontic workflow.

This retrospective study aimed to evaluate a possible correlation between the characteristics of the mandibular ramus and lower third molar impaction by comparing a group of subjects with an impacted lower third molar and a second group with normal eruption for an early prediction of this pathology. This comparison was made using linear and angular measurements, which were taken on digital panoramic radiographs. Materials and methods: A total of 726 orthopantomographs (OPT) were examined, and 81 were considered suitable for the present study. The results were divided into two groups: a control group and an experimental group. The control group comprised 38 cases in which patients had at least one lower third molar that had erupted, and the experimental group comprised 43 cases in which patients had at least one lower third molar that was impacted or partially impacted. In total, 16 variables (11 linear, 4 angular, and 1 ratio) were determined and measured by an experienced observer. Results: The control group had a larger retromolar space, a larger impaction angle and a higher ratio of retromolar area to the third molar, compared to the experimental group. In contrast, the experimental group showed a deeper sigmoid notch depth than the control group did. In the control group, moderate positive correlations were found between both the length of the coronoid and the width of the third molar, and the retromolar space. Furthermore, in the experimental group, moderate positive correlations were found between both the angular condyle–coronoid process and the inclination of the lower posterior teeth, and the retromolar space. Conclusion: this study showed that the angle of a lower third molar, in relation to mandibular pain, can be an index for predicting tooth inclusion.

Non-surgical approaches have been proposed in the management of mandibular fractures, especially in children, but there is a lack of clear guidelines on the clinical indications of conservative approaches. The aim of this scoping review is to provide the available evidence of the role of the orthodontist in the management of mandibular fractures. The PRISMA-ScR guidelines were followed to select eligible articles from the PubMed, Scopus, and Web of Science databases according to precise inclusion criteria. The research questions were formulated as follows: “what is the scientific evidence concerning the rule of orthodontists in the management of mandibular fractures” and “the preferential use of the direct bonding technique with orthodontic brackets rather than rigid arch bars”? Seventeen articles were included. Five articles presented the use of removable acrylic splints or functional appliances, six articles concerned the employment of cemented acrylic or rigid splints, and six articles described the management of mandibular fractures in adults and children using orthodontic brackets or mini-screws. Most of these techniques have been employed in children and growing subjects, while fewer data were available regarding conservative treatments in adults. Preliminary evidence suggests that condylar and some minor parasymphyseal fractures in children may be managed with conservative approaches. In adults, minor condylar and stable body mandibular fractures with minimal displacement have been reduced similarly. However, there are no sufficient elements that could suggest the preferential use of orthodontic brackets over rigid arch bars in adults. Further randomized and non-randomized clinical trials with long follow-ups will be needed to better define the clinical indications of the orthodontic approaches in the management of mandibular fractures based on severity, location, and age.

Abstract Aim This study aimed to investigate salivary concentrations of Streptococcus mutans (S. mutans) and some Lactobacilli, and plaque index (PI) in patients wearing fixed versus removable orthodontic appliances. Methods A sample of 90 orthodontic patients (56 males and 34 females) was included in the study: 30 subjects (aged 21.5±1.5 years) were treated with removable clear aligners (CA), while for other 30 cases (aged 23.3±1.6 years) a fixed multibrackets appliance (MB) were utilized, and 30 patients (aged 18.2 ±1.5 years) wearied a removable positioner (RP). Salivary concentrations of S. mutans and Lactobacilli and PI were evaluated prior to start of the orthodontic treatment, after 3 months and 6 months. Results After 6 months, 40% of MB patients (12 subjects over 30) showed a concentration of S. mutans associated to high risk of developing tooth decay (CFU/ml>105), differently from participants wearing removable appliances (odds ratio = 5.05; 95% C.I. = 1.72‐14.78; chi‐square = 9.64; p = 0.0019). The same trens was observed for the concentration of Lactobacilli (odds ratio = 4.33; 95% C.I. = 1.53‐12.3; chi‐square = 8.229; p = 0.004). In addition, over the duration of the study, CA patients maintained PI at 0 level, while MB patients experienced a statistically significant increasing trend of PI over time, and their PI became clinically/statistically relevant after 6 months, respect to CA and RP patients. Conclusions Comparing all the data, while, after 6 months, only about 10% of CA patients and 13.3% of RP patients achieved a microbial colonization which may lead to high risk of caries development, about 40% of MB patients ‐ and 20% after 3 months ‐ showed a high level of vulnerability to developing caries, which require additional strategies for plaque control and microbial colonization to be employed.

Objectives. The study aims at assessing the accuracy of the process of attachment bonding in aligner treatments. The analysis leads to the error estimation in the faithful reproduction of master model attachments using two types of transfer templates and two light-curing resin-based composites usually used in orthodontics. Methods. The authors have used two transfer templates made of two different materials. The first, named Leone-biocompatible thermoforming material hard/soft, has a lower Young’s modulus and is labelled as soft, while the other, named Leone-biocompatible thermoforming material, is marked as rigid. The resin-based composites possess different mechanical and rheological properties. Specifically, Transbond™ XT Light Cure Paste Adhesive, 3M has a higher viscosity than the TetricEvoflow, Ivoclar Vivadent, a flowable nanohybrid composite. The authors attempt to estimate the performance ranking between the four possible couples obtained by combining the two light-curing resin-based composites and transfer templates. Each combination was repeated in six models and compared with twelve master models, resulting in 36 total samples. A 3-D laser scanner is used to generate a digital model of each model. The comparison between digital models is the base for a comparative assessment in terms of relative and absolute error. The relative error is estimated using scalar performance indicators ranging from 0 to 1, where 1 indicates the optimum matching. The absolute error estimated from the mean square error between the coordinates of each digital model yields the reproduction accuracy in micrometer. Furthermore, the authors attempted to assess the error distribution by evaluating the point-by-point difference between the digital models. Results. This analysis aims at localizing the sources of error in the considered models. The use of Transbond™ XT Light Cure Paste Adhesive, 3M with a rigid transfer template is always associated with significant accuracy and minor dispersion. However, in a few instances, using the soft template or the flowable resin-based composite can lead to bad performances. Significance. The data processing bestowed the following performance ranking from the first with lower reproduction error to the last characterized by the worst performance: (1) attachments bonding with rigid template and Transbond™ XT Light Cure Paste Adhesive, 3M, (2) attachments bonding with soft template and Transbond™ XT Light Cure Paste Adhesive, 3M, (3) attachments bonding with rigid template and TetricEvoflow, Ivoclar Vivadent, and (4) attachments bonding with soft template and TetricEvoflow, Ivoclar Vivadent.

Guided bone regeneration (GBR) has been shown to be an optimal technique to accelerate the bone regeneration process thanks to the action of membrane barriers that promote tissue healing through the process of osteogenesis, inducing the repopulation with osteoprogenitor cells that prevent the invasion of non-osteogenic tissue. However, current membranes, such as expanded polytetrafluoroethylene or rubber dam, have some disadvantages that could potentially reduce the effectiveness of GBR. Recently, some scaffolds with magnetic properties have been tested to promote rapid osteogenesis. The aim of this laboratory study was to evaluate the intensity of the magnetic field generated by a custom-made rubber dam magnetised with neodymium-iron-boron (Nd2F14B) (three layers of latex filled with Nd2F14B powder on the inner surface) and to understand the effects of such a membrane on cell viability. A magnetic field of 750 G, 400 G, and 900 G was generated on the surface and on the long and wide sides of 3 and 2 cm in contact with the rubber dam. At a distance of 1 mm from the magnetic dam, a magnetic field of 300 G, 150 G, and 400 G was measured on the surface and on the long and wide sides of the rubber dam, respectively. After 72 h, the MG-63 osteoblast-like line showed a slight decrease in cell proliferation (85 ± 10) compared with the unmodified dam (95 ± 6) and the cell control population. According to our findings, this magnetic cofferdam is able to generate a static magnetic field and significantly affect cell proliferation in contrast to other nonabsorbable membranes. Further laboratory studies and subsequent clinical trials are needed to evaluate the significant improvements that can be achieved by using this type of magnetic rubber dam in GBR.

ObjectiveThis study aimed to investigate salivary levels of Streptococcus mutans (S. mutans) and Lactobacilli, and other salivary indices in subjects wearing clear aligners (CA) in comparison with multibrackets orthodontic appliances (MB).Materials and methodsA sample of 80 participants (46 males and 34 females) was included in the study: 40 subjects (aged 20.4±1.7 years) were treated with CA, and 40 (aged 21.3±1.7 years) were treated with MB. Plaque index (PI), salivary flow, buffering power of saliva, and salivary levels of S. mutans and Lactobacilli were evaluated prior to start of orthodontic treatment (t0), after 3 months (t1) and 6 months (t2).ResultsCA patients maintained PI at level 0 over time, while MB participants experienced a statistically significant increasing trend of PI over time. In addition, at t2, 37.5% of MB participants (15 subjects over 40) showed risky salivary levels (CFU/ml>105) of S. mutans (odds ratio = 7.40; 95% C.I. = 1.94-28.25; chi-square = 10.32; p = 0.001) as well as Lactobacilli (odds ratio = 23.40; 95% C.I. = 2.91-188.36; chi-square = 15.31; p = 0.0001).ConclusionsComparing all the data, subjects treated with CA achieved lower salivary microbial colonization after 6 months of treatment compared with MB. Different additional strategies for plaque control and salivary microbial colonization must be triggered considering the type of orthodontic appliance.

In orthodontics, post-treatment retention phase is crucial for maintaining the obtained clinical results. In cases of crowding, a bonded fixed retainer is often chosen to maintain teeth alignment in the anterior sector of the lower dental arch. A fixed retainer can remain in the mouth for years. Therefore, it is important that it is applied with harmless materials for the level of plaque control. The present study aimed to investigate the salivary concentrations of Streptococcus mutans (S. mutans) and Lactobacilli, and the Sillness and Loe plaque index, in patients wearing metal wire versus fiberglass orthodontic retainers. Forty post-orthodontic patients were included in the sample: in 20 subjects a metal wire retainer was applied (MR), while in the others a fiberglass retainer was applied (FR). The variables were recorded at baseline (T0), after 1 month (T1), and after 2 months (T2) of follow-up. The percentage of patients with a level of S. mutans and Lactobacilli colonization > 105 increased over time in the FR group (T0 = 0%, T1 = 5%, T2 = 35%), compared with the MR group. PI increased in the FR group (T0 = 0, T1 = 14, T2 = 27), and remained almost the same in the MR group (T0 = 3, T1 = 0, T2 = 2). From the present results it appears that the metal wire retainer is better than the fiberglass retainer for the level of plaque control performed by the patients.

Recently, the demineralized dentin matrix has been suggested as an alternative material to autologous bone grafts and xenografts for clinical purposes. The aim of this study was to investigate the effect of different times of demineralization on the chemical composition and the surface morphology of dentinal particles. Extracted teeth were ground and divided into 5 groups based on demineralization time (T0 = 0 min, T2 = 2 min, T5 = 5 min, T10 = 10 min, and T60 = 60 min) with 12% EDTA. The analysis was performed using Fourier-Transform Mid-Infrared spectroscopy (FT-MIR) and Scanning Electron Microscopy (SEM) (p < 0.05). The FT-MIR analysis showed a progressive reduction of the concentration of both PO43− and CO32− in the specimens (T0 > T2 > T5 > T10 > T60). On the contrary, the organic (protein) component did not undergo any change. The SEM examination showed that increasing the times of demineralization resulted in a smoother surface of the dentin particles and a higher number of dentinal tubules.

The present observational prospective study analyzes the eating habits in association with the medico-oral health of catering workers, since they seem the category at higher risk of developing dental problems. Objective: To evaluate oral and medical health through a questionnaire in a total sample of 603 participants. Additionally, this article aims to provide information regarding the medico-oral implications of an unbalanced diet linked to this particular profession. Material and methods: A questionnaire created through Google Forms platform was sent to all members of the Italian Federation of Chefs (FIC). The mean age was 46.9 ± 32.6 ranging from 17 to 66 years old. Results: Catering workers’ years of service showed a significant impact on the presence of teeth pain (p < 0.05), missing teeth (excluding the third molars) (p < 0.01), treatment with prothesis (p < 0.01), dental fillings (p < 0.01), dental extractions (p < 0.01), diabetes (p < 0.05), high blood pressure (p < 0.01), joint pain (p < 0.01), back pain (p < 0.01), neck pain (p < 0.01), and gastroesophageal reflux (p < 0.05). Conclusions: A conspicuous part of the study sample was overweight, with a high BMI. Moreover, the years of service in this field showed significant impact on dental problems. Therefore, a very important role is that of preventing dental problems and giving information on the causes and effects unknown to many workers in the sector.

Background and Objectives: The aim of the present systematic review and meta-analysis was to investigate the efficacy of leukocyte–platelet-rich fibrin (L-PRF) in addition to coronally advanced flap (CAF) for the treatment of both single and multiple gingival recessions (GRs) compared to the CAF alone and to the adjunct of connective tissue graft (CTG). Root coverage outcomes using platelet concentrates have gained increased interest. In particular, it has been suggested that adding L-PRF to CAF may provide further benefits in the treatment of GRs. Materials and Methods: An electronic and manual literature search was conducted to identify randomized controlled trials (RTCs) investigating root coverage outcomes with CAF + L-PRF. The outcomes of interest included mean root coverage (mRC), recession reduction, keratinized tissue width (KTW) gain, gingival thickness (GT) gain, and patient-reported outcome measures (PROms) such as pain perception and discomfort. Results: A total of 275 patients and 611 surgical sites were analyzed. L-PRF in adjunct to single CAF seems to show statistically significant results regarding clinical attachment level (CAL) with a weighted means (WM) 0.43 95% CI (−0.04, 0.91), p < 0.0001, GT (WM 0.17 95% CI (−0.02, 0.36), p < 0.0001, and mRC (WM 13.95 95% CI (−1.99, 29.88) p < 0.0001, compared to single CAF alone. Interesting results were obtained from the adjunct of PRF to multiple CAF with respect to multiple CAF alone with an increase in the mRC WM 0.07 95% CI (−30.22, 30.35), p = 0.0001, and PPD change WM 0.26 95% CI (−0.06, 0.58), p < 00001. On the other hand, no statistically significant data were obtained when L-PRF was added to single or multiple CAF combined with CTG according to the included outcomes such as mRC (p = 0.03 overall). Conclusions: L-PRF is a valid alternative to CAF alone. L-PRF compared to CTG in single and multiple CAF showed statistically significant results regarding pain perception and discomfort PROms (p < 0.0001). However, CTG remains the gold standard for treating gingival recession.

This study aimed to investigate the histological features of deproteinized equine bone mineral (DEBM) and anorganic bovine bone (ABB) after human sinus augmentation with the lateral approach. Twenty-three sinus augmentations were performed in 16 patients (male: 10/female: 6) using DEBM or ABB in a randomized fashion. Healing took place over the next 6 months. Bone core biopsies (N = 23) were obtained for each subject prior to placing the dental implants. The biopsies were processed for both histological descriptions and histomorphometric analysis. Statistical analyses were applied as appropriate, defining statistical significance as p < 0.05. Core bone biopsies revealed no differences in terms of newly formed bone between groups, or differences in terms of tissue inflammation. Both DEBM and ABB appear to be suitable biomaterials for bone augmentation in sinus lift surgery in the short term. However, dedicated studies are required to confirm these results and their stability in the long term.

SARS-CoV-2 propagation in the world has led to rapid growth and an acceleration in the discoveries and publications of various interests. The main focus of a consistent number of studies has been the role of angiotensin-converting enzyme 2 (ACE2) in binding the virus and its role in expression of the inflammatory response after transmission. ACE2 is an enzyme involved in the renin–angiotensin system (RAS), whose key role is to regulate and counter angiotensin-converting enzyme (ACE), reducing the amount of angiotensin II and increasing angiotensin 1–7 (Ang1–7), making it a promising drug target for treating cardiovascular diseases. The classical RAS axis, formed by ACE, angiotensin II (Ang II), and angiotensin receptor type 1 (AT1), activates several cell functions and molecular signalling pathways related to tissue injury and inflammation. In contrast, the RAS axis composed of ACE2, Ang1–7, and Mas receptor (MasR) exerts the opposite effect concerning the inflammatory response and tissue fibrosis. Recent studies have shown the presence of the RAS system in periodontal sites where osteoblasts, fibroblasts, and osteoclasts are involved in bone remodelling, suggesting that the role of ACE2 might have a fundamental function in the under- or overexpression of cytokines such as interleukin-6 (IL-6), interleukin-7 (IL-7), tumour necrosis factor alpha (TNF-α), interleukin-2 (IL-2), interleukin-1 beta (IL-1β), monocyte chemoattractant protein-1 (MCP-1), and transforming growth factor-beta (TGF-β), associated with a periodontal disorder, mainly during coinfection with SARS-CoV-2, where ACE2 is underexpressed and cannot form the ACE2–Ang1–7–MasR axis. This renders the patient unresponsive to an inflammatory process, facilitating periodontal loss.

Background and objectives: Dental crowding is more pronounced in the mandible than in the maxilla. When exceeding a significant amount, the creation of new space is required. The mandibular expansion devices prove to be useful even if the increase in the lower arch perimeter seems to be just ascribed to the vestibular inclination of teeth. The aim of the study was to compare two activation protocols of the Schwartz appliance in terms of effectiveness, particularly with regard to how quickly crowding is solved and how smaller is the increasing of vestibular inclination of the mandibular molars. Materials and Methods: We compared two groups of patients treated with different activation’s protocols of the lower Schwartz appliance (Group 1 protocol consisted in turning the expansion screw half a turn twice every two weeks and replacing the device every four months; Group 2 was treated by using the classic activation protocol—1/4 turn every week, never replacing the device). The measurements of parameters such as intercanine distance (IC), interpremolar distance (IPM), intermolar distance (IM), arch perimeter(AP), curve of Wilson (COW), and crowding (CR) were made on dental casts at the beginning and at the end of the treatment. Results: A significant difference between protocol groups was observed in the variation of COWL between time 0 and time 1 with protocol 1 with protocol 1 subjects showing a smaller increase in the parameter than protocol 2 subjects. The same trend was observed also for COWR, but the difference between protocol groups was slightly smaller and the interaction protocol-by-time did not reach the statistical significance. Finally, treatment duration in protocol 1 was significantly lower than in protocol 2. Conclusion: The results of our study suggest that the new activation protocol would seem more effective as it allows to achieve the objective of the therapy more quickly, and likely leading to greater bodily expansion.

This study aims to evaluate whether or not there is a higher prevalence of skeletal abnormalities in subjects with maxillary canine impaction (MCI). This retrospective study was performed on 67 subjects with maxillary canine impaction (test group) and on 67 patients without dental displacement (control group). Sella turcica bridging (SB), ponticulus posticus (PP), atlas posterior arch deficiency (APAD) and the morphology of sella turcica and pterygopalatine fissure were evaluated on lateral cephalometric radiographs. Statistical analysis was performed using chi-square, Mann–Whitney test and multivariate logistic models; the level of significance was p < 0.05. Results showed that in the test and control groups 87% and 62.7% of patients had SB, respectively. PP was observed in 60% of patients in the test group and in 16.4% of patients in the control group. APAD was observed in 9% of test group and in 4.5% of the control group. Skeletal anomalies were significantly increased (p < 0.05) in subjects with MCI. A significant difference between the groups was observed in regards to the shape of the pterygopalatine fissure, found to be less wide and longer in the test group. SB, PP and APAD were higher in subjects with MCI; furthermore, an elongated pterygopalatine fissure was significantly associated with MCI.

The position of the upper first molar (UFM) is currently considered the “key of occlusion”. The purpose of this study was to evaluate the prevalence of the mesiorotated UFM, and its relationship with anterior dental crowding in mixed and permanent dentition. Intra-oral scans of upper dental arches of 180 subjects with mixed dentition and 169 subjects with permanent dentition were retrospectively analyzed to investigate the presence of UFM mesiopalatal rotation and presence of anterior crowding. The occlusal relationship and the presence of caries were also recorded. In subjects with permanent dentition, there was a statistically significant correlation between anterior crowding and UFM mesiopalatal rotation (Pearson’s chi-square = 9.03; p = 0.06). Among cases with permanent dentition, subjects with UFM mesiopalatal rotation showed an OR = 3.28 (95% CI = 0.99–10.93; p = 0.042) of moderate/severe anterior dental crowding, respect to subjects without UFM rotation. In subjects with mixed dentition, there was a statistically significant correlation between molar occlusal relationship and UFM mesiopalatal rotation (Pearson’s chi-square = 14.98; p = 0.002), and subjects with molar class II showed a OR = 10.2 (95% CI = 2.16–48.22; p = 0.0005) to present UFM mesiopalatal rotation, with respect to subjects with molar class I. UFM mesiopalatal rotation is associated to anterior dental crowding in permanent dentition, and to class II malocclusion in mixed dentition.

Tissue engineering represents a novel approach that aims to exploit the use of biomaterials composed mainly of scaffolds, cells (or grafts), and growth factors capable of restoring a specific tissue. Biomaterials represent the future of dental and oral regeneration due to their biocompatibility and affinity with the receiving site. The aim of this review was to collect results and considerations about a new type of biomaterial based on the use of micrografts in combination with different scaffolds. Micrografts are tissue particles enriched with progenitor cells (PCs), which are defined as descendants of stem cells that can differentiate into specialized cells belonging to the same tissue. PCs in the oral cavity might be extracted from various tissues such as dental pulp, periosteum, or periodontal ligament. Moreover, these cells are easy to isolate through a mechanical process that allows for the filtration of cells with a diameter of 80 μm, in contrast with enzymatic procedures where reagents are used and various culture periods are needed. The aim of this review was to collect data regarding the use of micrografts, developed by a Rigenera® chair-side machine, in oral regeneration evaluating the clinical, histological, and radiographical outcomes. There have been encouraging results for the application of micrografts in bone and periodontal regeneration, but further randomized clinical trials are needed to validate this promising outcome.

Invisible orthodontic aligners (IOAs) have been introduced in the orthodontic field as an innovative alternative for fixed brackets, in relation to their ability to be easily inserted/removed from the oral cavity without affecting the chewing ability and the aesthetic of the patients. The paper provides a complete physicochemical and mechanical characterization of thermoplastic materials in the form of disks used for commercial IOAs. A wide palette of specific techniques is considered, from tensile tests and dynamic-mechanical analysis, to X-Ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transformation infrared spectroscopy (FTIR-ATR) analyses and water absorption tests. The disks are investigated before and after immersion into staining beverages (red wine, coffee, nicotine and artificial saliva), in terms of colour variations, transparency, and microscopic surface modifications by means of colorimetry, UV-VIS absorbance and scanning electron microscopy (SEM). Among all the samples, polyurethane (PU) exhibited the highest crystallinity and the highest values of mechanical and thermal resistance, while the poly(ethylene terephthalate)-glycol (PETG) samples presented better transparency and less ability to absorb water. Moreover, red wine and coffee give noticeable colour variations after 14 days of immersion, together with a slight reduction of transparency.

Aim: The treatment of patients with mixed dentition, with inferior moderate dental crowding (the so-called borderline cases, between extraction and expansion) is not yet clear. Two examples of widely used appliances for increasing lower dental arch dimensions are the Schwarz’s appliance and lip bumper. The aim of this prospective study was to compare dental crowding and arch dimensions from pre- to post-treatment with lip bumper versus Schwarz’s appliance. Subjects and Methods: Pre- and post-treatment orthodontic records of twenty subjects (10 males and 10 females) were analyzed in the present study. Inclusion criteria were: first/second molar class malocclusion; crowding of the mandibular arch, from mild to moderate (4–6 mm); mixed dentition; age ≤ 9 years at the beginning of the treatment; stage CS1 or CS2 of maturation of the cervical vertebrae analysis (CVM) at the beginning of the treatment. Ten subjects were treated with a lip bumper, and ten with the removable Schwarz appliance. The primary outcomes were the variations in dental crowding and arch dimensions from pre- to post-treatment. Results: Both the two appliances caused a statistically significant mean improvement/reduction in crowding, of 3.5 mm and 2.9 mm, for the Schwarz appliance and lip bumper, respectively. The Schwarz appliance resulted more effective in increasing arch dimension at the intercanine level, and arch perimeter, while the lip bumper achieves a higher increase in arch length. Conclusions: A lip bumper and Schwarz appliance are both useful in reducing crowding in mixed dentition. This improvement is due to the increase in dental arch dimensions, although the distribution of space resulted slightly differently between the two appliances.

Dentoskeletal class II malocclusion due to a protruded upper dental arch is a major reason for an orthodontic treatment. In these cases, the correction of class II can be hindered by molar distalization, obtained with ‘no-compliance therapy’ that involves the use of appliances which minimize the need for such co-operation and attempt to maximize the predictability of results. The aim of this review was to outline the effectiveness of no-compliance fixed orthodontic devices in the molar distalization. After selection according to the inclusion/exclusion criteria, 16 articles from 2000 to 2019 were qualified for the final analysis. The literature shows various no-compliance fixed devices whose effect is to distalize the maxillary molars. The present revision allows to conclude that there is a need to increase the number of studies, especially with regard to the most recently introduced devices in the literature. The analysed studies allow to hypothesize that these appliances act with a minimal variability of molar distalization and disto-inclination among them, although different effects among the appliances can be observed as regards to the anchorage.

In the publication of this article [1], there is an error in the Family Name and Given Name of the authors since these were interchanged.