36 results on '"Stark, Matthias"'
Search Results
2. Relationship between GPS-based community mobility data and orthopedic trauma admissions during the COVID-19 pandemic in Austria: a multicenter analysis
- Author
-
Jeremic, Natasa, Widhalm, Harald Kurt, Doering, Kevin, Popp, Domenik, Stark, Matthias, Ower, Cornelia, Rohit, Arora, Boesenberg, Roberto, Leithner, Andreas, and Nia, Arastoo
- Published
- 2024
- Full Text
- View/download PDF
3. Deutsche Übersetzung des Know-IAD-Instrumentes
- Author
-
Durakovic, Haris, Gaugl, Patricia, Klug, Lena, Stark, Matthias, and Bauer, Silvia
- Published
- 2024
- Full Text
- View/download PDF
4. Steam storage for flexible biomass power generation
- Author
-
Stark, Matthias
- Abstract
Due to the widespread installation of renewable energy plants, with the aim of a decarbonised electricity supply, the proportion of this generation has increased significantly in recent years. However, these plants increase the variability of electricity generation. This variable power generation leads to challenges in the operation of the power grid, e.g. to local grid bottlenecks and grid overloads. To counteract this variable, and to a certain extent, unpredictable power generation, storage devices or flexible power plants are necessary. Several biogas plants have already been modified in such a way that demand-driven and flexible power plant operation is possible. In response to the need for flexibility, the presented research aims at flexible power generation for solid biomass-fuelled CHP plants. By integrating a steam storage device into the biomass CHP plant, the steam turbines should be enabled to operate with a flexible, demand-dependent steam mass flow in order to adapt their power output to the grid demand. The main research questions are, which storage system is most suitable, what the key parameters of the flexible plant are and what impact it has on the grid and markets. The storage system as well as utilization in biomass CHP plants are novel concepts. Especially the operation parameter for the specific boundaries of these plant technologies have not been investigated before. A combination of two or more technologies to separately store the latent and sensible energy of superheated steam was identified as necessary. A utility analysis, supported by a Delphi study with experts, was carried out. In this case, a steam accumulator (SA) combined with a solid thermal store (STS) has proven to be the most suitable storage device for the given requirements. A MATLAB/SIMULINK model for the flexible biomass CHP plant was developed and validated to investigate the proposed system. Parameter studies were conducted to determine the key values of the flexible plant, such as energy capacity, charge/discharge time and efficiency. A storage configuration consisting of a 100 m³ SA and 12.3 m³ STS is capable of reducing the electricity production by 3.5-3.7 MWh during charging. During discharge, an additional amount of 1.8-1.9 MWh is generated. A system efficiency of 76-92 % was achieved. Flexible operation depending on prices in the short-term electricity markets causes a reduction of between 0.5% and 2% of the total revenue of the plant of due to process losses related to the operating the storage facility. The feed-in tariff structure has had a significant impact on this revenue shortfall. The flexible operation allows a temporary peak reduction of 28% (from 19.2 MW to 13.7 MW). Compared to competing technologies such as pumped hydro, batteries or hydrogen storage systems, the proposed flexible biomass CHP plant system is competitive. It was shown that an operation similar to flexible biogas plants is possible. The operation of already existing flexible biogas plants can also be improved by using the proposed solution.
- Published
- 2021
5. Comparison of Ring-Liner Oil Film Thickness Resulting from Dierent Injector Designs in a Diesel Marine Engine Using an Ultrasound Measurement Method
- Author
-
Rooke, Jack, Li, Xiangwei, Brunskill, Henry, Stark, Matthias, and Dwyer-Joyce, Rob
- Published
- 2021
6. Steam storage systems for flexible biomass CHP plants - Evaluation and initial model based calculation
- Author
-
Stark, Matthias, Conti, Fosca, Saidi, Abdessamad, Zörner, Wilfried, and Greenough, Rick
- Published
- 2019
- Full Text
- View/download PDF
7. Linearizing an electrostatically driven MEMS speaker by applying pre-distortion
- Author
-
Tumpold, David, Stark, Matthias, Euler-Rolle, Nikolaus, Kaltenbacher, Manfred, and Jakubek, Stefan
- Published
- 2015
- Full Text
- View/download PDF
8. The metadata-database of a next generation sustainability web-platform for language resources
- Author
-
Rehm, Georg, Schonefeld, Oliver, Witt, Andreas, Lehmberg, Timm, Chiarcos, Christian, Bechara, Hanan, Eishold, Florian, Evang, Kilian, Leshtanska, Magdalena, Savkov, Aleksandar, and Stark, Matthias
- Published
- 2023
9. Optimization of Tribodynamic Effects to Improve the Reduction Potential of Particulate Matter Concentrations in the Exhaust Gas of Large Two Stroke Marine Diesel Engines
- Author
-
Stark, Matthias and Mittler, Richard
- Published
- 2014
10. Nicht nur Gegensätze
- Author
-
Gudrun Stark, Matthias Stark
- Published
- 2016
11. SVMs for Vibration-Based Terrain Classification
- Author
-
Weiss, Christian, Stark, Matthias, Zell, Andreas, Brauer, W., editor, Berns, Karsten, editor, and Luksch, Tobias, editor
- Published
- 2007
- Full Text
- View/download PDF
12. Alarm management training can reduce alarms on monitoring wards
- Author
-
Stark, Matthias Johann
- Subjects
Intermediate-Care-Station ,Warnsignal ,clinical alarm ,Reduktion ,Krankenpflege ,Alarmmanagement ,alarm management ,staff education ,Alarmmüdigkeit ,Personalschulung ,Schulung ,Klinischer Alarm ,alarm fatigue - Abstract
Hintergrund: Klinische Alarme nehmen durch die fortschreitende Digitalisierung zu. Häufige Alarme auf einer Station sind aufgrund auftretender Alarm-Fatigue ein Sicherheitsrisiko für Patientinnen und Patienten. Ein Alarmmanagement kann dabei helfen, Alarme zu reduzieren. Alarmmanagementschulungen tragen dazu bei, dem Pflegepersonal Alarm-Fatigue bewusst zu machen. Auch gesetzlich wird die Pflege in die Pflicht genommen, ein adäquates Alarmmanagement zu betreiben. Jedoch gibt es zum Thema Alarmmanagementschulungen bisher noch keine Übersichtsarbeiten.Forschungsfrage: Wie beeinflusst die Schulung von Pflegepersonal zum Thema Alarmmanagement die Häufigkeit von Alarmen und Alarm-Fatigue auf Überwachungsstationen?Methode: Es wurde von Jänner bis März 2022 eine strukturierte Literaturrecherche durchgeführt. Es wurde in den Datenbanken PubMed, Cochrane Library, CINAHL, Google Scholar und den Referenzlisten der inkludierten Studien gesucht.Ergebnisse: Es konnten sieben geeignete Studien identifiziert werden. Diese Studien zeigen, dass eine Reduktion der Alarme durch Schulungsinterventionen möglich ist. Die Reduktion von Alarm-Fatigue kann durch die Studien nicht klar bewiesen werden, da nur zwei Studien diesen Endpunkt untersuchten und zu unterschiedlichen Ergebnissen kamen. Schlussfolgerung: Eine Alarmreduktion konnte durch Personalschulungen erzielt werden. Es benötigt mehr Forschung im Bereich der Alarm-Fatigue. Die Implementierung eines Schulungsprogramms für Alarmmanagement kann positive Effekte haben. Background: Clinical alarms increase with the progress of digitalization. Numerous alarms on a ward are a safety issue for patients because of occurring alarm fatigue. Alarm management can help to reduce alarms. Alarm management training can help nursing staff to get aware of alarm fatigue. Also by law nurses get taken into responsibility to perform adequate alarm management. However on the topic alarm management education there is no review. Research question: How does education of nursing staff on alarm management influence the numbers of alarms and alarm fatigue in monitoring wards?Method: A structured literature search was conducted from January to March 2022. The search was performed in the databases PubMed, Cochrane Library, CINAHL, Google Scholar and in the reference lists of the included studies.Results: Seven studies could be identified. Those studies pointed out that a reduction of alarms could be achieved with educational interventions. The reduction of alarm fatigue could not be clearly proved because the only two studies which examined this outcome showed different results. Conclusion: Alarm reduction could be achieved through staff education. More research is required on the topic of alarm fatigue. The implementation of educational programs for alarm management can have positive outcomes. Matthias Johann Stark Abweichender Titel laut Übersetzung der Verfasserin/des Verfassers Bachelorarbeit FH JOANNEUM 2022
- Published
- 2022
13. Neues Strommarktdesign für die Integration fluktuierender Erneuerbarer Energien
- Author
-
Böttger, Diana, Becker, Holger, Dreher, Marian Alexander, Ganal, Helen, Geiger, David, Gerhardt, Norman, Harms, Yannic, Pape, Carsten, Fouquet, Dörte, Schmitz, Richard, Schön, Andrea, Große, Andreas, Ulffers, Jan, Fuchs, Nicolas, Kost, Christoph, Thomsen, Jessica, Pfennig, Maximilian, Lehnert, Wieland, Stock, David Sebastian, Axthelm, Wolfram, and Stark, Matthias
- Subjects
Systemdienstleistungen ,Erneuerbare Energien ,Marktdesign ,Politikoptionen ,Stromnetz - Published
- 2021
- Full Text
- View/download PDF
14. Renewable Energy Integration for Steam Supply of Industrial Processes—A Food Processing Case Study
- Author
-
Hechelmann, Ron-Hendrik, Seevers, Jan-Peter, Otte, Alexander, Sponer, Jan, and Stark, Matthias
- Subjects
biomass boilers ,Bioenergie ,lcsh:T ,Lebensmittelverarbeitung ,Energiekosten ,decarbonisation ,Erneuerbare Energien ,electrode boiler ,steam systems ,lcsh:Technology ,fuel cell ,solar thermal ,energy costs ,food processing industry ,stream systems ,Brennstoffzelle - Abstract
This study highlights the C O 2 , e -emission reduction potentials and related economic consequences for changing steam generation from fossil to renewable. Seven different utility concepts are developed, including a steam accumulator for load management. Peculiarities for the integration of biogas boilers, biomass-fuelled boilers, electrode steam boilers, biomethane-fuelled solid oxide fuel cells, micro gas turbine, solar energy systems, heat pumps and steam accumulators into a steam system with fluctuating steam demand are explained and the energy balance based models for the simulation study are described. The characteristics of batch processes, start up times and part load efficiency are considered via an annual dynamic simulation. Based on a detailed process analysis and dimensioning of the utilities and the accumulator a comprehensive simulation study is conducted for a pet food processing company having an average steam demand of 18,000 MWh at around 9 bar and 3 t/h. The results show that the highest C O 2 , e -emissions reduction of up to 63% is achieved by the transition to a solid biomass-fuelled boiler system. This leads to an increase of the operating costs by 27.8%.
- Published
- 2020
15. Development of common rail lube oil injector for large two-stroke marine diesel engines
- Author
-
Milanese, Marco, primary, Iacobazzi, Fabrizio, additional, Stark, Matthias, additional, and de Risi, Arturo, additional
- Published
- 2021
- Full Text
- View/download PDF
16. Development of common rail lube oil injector for large two-stroke marine diesel engines.
- Author
-
Milanese, Marco, Iacobazzi, Fabrizio, Stark, Matthias, and de Risi, Arturo
- Abstract
The two-stroke crosshead diesel engines, nowadays moving the majority of merchant vessels, have lubrication systems which significantly contribute to their overall emissions, since they work on total loss basis: a relevant fraction of lubricant enters the exhaust duct, increasing total exhaust emissions. This paper demonstrates that a viable solution to reduce lubrication system related emissions can be found in the application of a new common rail type (CR) lubrication system. Particularly, in the first part of this study, a common rail injector was simulated and numerically optimized by means of AMESim. The main parameters influencing lube oil injected mass were identified, with the purpose to design a highly time responsive injector. Therefore, a CR injector was realized and experimentally characterized by means of a dedicated test cell, defining the lube oil injection map over the entire engine load range. Finally, full scale engine tests allowed to evaluate oil loss at exhaust, proposing, and applying the Sulfur tracing methodology. A comparison with a pulse jet lubrication system demonstrated a relevant reduction in oil loss: 100% engine load testes demonstrated decreases ranging from 56.2% to 63.3%, while once fixed the lube oil feed rate to 0.8 g/kWh a maximum reduction in oil loss equal to 66.7% was reached. These results allow nominating the common rail lubrication system as a feasible solution to significantly reduce oil loss at exhaust of large two-stroke marine diesel engines. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
17. SVMs for Vibration-Based Terrain Classification
- Author
-
Weiss, Christian, primary, Stark, Matthias, additional, and Zell, Andreas, additional
- Published
- 2007
- Full Text
- View/download PDF
18. Flipped Classroom und Lernen durch Lehren im Geschichtsunterricht
- Author
-
Buchner, Josef, Stark, Matthias, and PHSG - Institut ICT & Medien
- Subjects
Flipped Classroom ,Lernen durch Lehren ,Geschichte ,Projekt ,Video - Published
- 2019
19. Methodological Evaluation of Storage Systems for Flexible Power Generation from Solid Biomass
- Author
-
Stark, Matthias, primary, Trinkl, Christoph, additional, Zörner, Wilfried, additional, and Greenough, Rick, additional
- Published
- 2018
- Full Text
- View/download PDF
20. Frühkomplikationen und Transfusionshäufigkeit von operativ versorgten sub- und pertrochantären Oberschenkelfrakturen abhängig vom OP Zeitpunkt, bei Patienten über 75 Jahre
- Author
-
Stark, Matthias, Schuler, Martin, and Ortner, Franz
- Subjects
ddc: 610 ,610 Medical sciences ,Medicine - Abstract
Zielsetzung: Geriatrische Patienten mit sub- und pertrochantären Frakturen sind ein häufiges Ereignis im unfallchirurgischen Alltag. Ziel war, postoperative Frühkomplikationen und Transfusionshäufigkeit zu erfassen und einem statistischen Vergleich zu unterziehen, sowie ob eine[zum vollständigen Text gelangen Sie über die oben angegebene URL], Alterstraumatologie Kongress 2016
- Published
- 2016
- Full Text
- View/download PDF
21. Design and experiments to investigate spray and impingement characteristics of a common rail type lubrication system
- Author
-
Stark, Matthias, primary, De Risi, Arturo, additional, Giangreco, Marcelo, additional, and Diggelmann, Simon, additional
- Published
- 2017
- Full Text
- View/download PDF
22. Transition of Steam Utility Systems to Solid Biomass-Fuelled Boilers and Biomethane-Fuelled Fuel Cells in the Wet Pet Food Processing Industry.
- Author
-
Peesel, Ron-Hendrik, Otte, Alexander, and Stark, Matthias
- Subjects
METHANE ,FOOD industry ,FUEL cells ,NATURAL gas ,RENEWABLE energy sources - Abstract
This study highlights the CO
2e - emission reduction potentials and related economic consequences for changing the steam generation from fossil to renewable. Two different utility concepts are developed, including a steam accumulator for load management. The first concept integrates a solid biomass-fuelled boiler into an existing utility system with a natural gas boiler. The second concept uses a biomethane-fuelled fuel cell for the base load and a natural gas boiler as a backup boiler. A detailed process analysis and dimensioning of the technology and the accumulator is the basis for a dynamic simulation. In the simulation the steam accumulator volume is varied. In addition, the electricity usage of the fuel cell is optimized in terms of costs or emissions. The comprehensive simulation study is done for a pet food processing company having an average steam demand of 18,000 MWh at around 9 bar and 3 t/h. The results show that the CO2e - emissions can be reduced up to 42% by the transition to a solid biomass-fuelled boiler system and up to 27% using a biomethane fuelled solid oxide fuel cell. This leads to an increase of the operating costs. The comparison of the reduction to the total costs resulted in 0.05 - 0.11 €/kg CO2e - reduction per year for the biomass fuelled system and for the fuel cell in 0.69 - 1.14 €/kg CO2e - reduction per year. To transfer these concepts to other cases, the scope of the study focused on covering a representative steam demand. The study shows that switching to renewable energy sources and implementing load management measures, emissions can be reduced at corresponding additional costs. [ABSTRACT FROM AUTHOR]- Published
- 2019
- Full Text
- View/download PDF
23. Design Parameters of Steam Accumulators for the Utilization in Industrial Solid Biomass-Fuelled CHP Plants.
- Author
-
Stark, Matthias, Philipp, Matthias, Trinkl, Abdessamad Saidia Christoph, Zörner, Wilfried, and Greenough, Rick
- Subjects
STEAM accumulators ,BIOMASS ,SUPPLY chains ,CONSTRUCTION materials ,GREENHOUSE gas mitigation - Abstract
Fossil fuels are currently used to generate the major part of process steam for industrial facilities. An established approach for the sustainable substitution of fossil resources is the supply from solid biomass-fuelled combined heat and power (CHP) plants. However, current designs of biomass CHP plants usually raise only a share of the total steam demand (fossil-fuelled boilers supplying the rest), due to limits in their design. A steam accumulator represents a promising device to increase the share of steam generated from biomass. Based on a simulation model developed for the specific application, this paper confirms the positive effect of a steam accumulator on the biomass coverage ratio (BCR). An increase from 82% up to 95% is demonstrated Furthermore, relevant design parameters such as the charging massflow and the operational pressure difference are identified as key design parameters for the steam accumulator. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
24. Design and experiments to investigate spray and impingement characteristics of a common rail type lubrication system
- Author
-
European Commission, Stark, Matthias, de Risi, Arturo, Giangreco, Marcelo, Diggelmann, Simon, European Commission, Stark, Matthias, de Risi, Arturo, Giangreco, Marcelo, and Diggelmann, Simon
- Abstract
[EN] This paper reports on the establishment of a testing facility to investigate spray and impingement characteristics of a recently developed, fully adaptive lubrication system for large two stroke marine diesel engines. The reported part of this research relates to development steps towards the new lubrication system as well as the implementation of a dedicated testing facility and the establishment of validation approaches in order to corroborate technology developments in this context. The major objective of this development yields an optimization of lubricant utilization and at the same time a significant reduction of lubricant fraction in the exhaust gas. A requisite to obtain the desired level of flexibility calls for a revised approach in injecting the lubricant. The desired flexibility of the new lubrication approach foresees a cycle based adjustment of the injected amount of lubricant as well as the injection pressure in order to provide the possibility to shape the injection spray pattern. Concept studies nominate the application of a common rail system with integrated needle lift type injectors and adjustable injection pressure as compliant with the requisite to inject the lubricant with a high level of flexibility. This paper hence encompasses design and development aspects of the new lubrication system but most of all highlights steps in developing a validation concept in order to compare common lubrication systems with the new type of lubrication system. Initial results of the test cell provide an insight regarding relevant information on the injection spray characteristics over the full engine load range as well as the possibility to compare common lubrication system performance with the new common rail lubrication system. A comparison between measurement and simulation results provide the possibility to implement experimentally gained data in a neuronal network in order to enhance the predictive quality of the simulation tool.
- Published
- 2017
25. Approaches for Dispatchable Biomass Plants with Particular Focus on Steam Storage Devices
- Author
-
Stark, Matthias, primary, Sonnleitner, Matthias, additional, Zörner, Wilfried, additional, and Greenough, Rick, additional
- Published
- 2016
- Full Text
- View/download PDF
26. Lubricant Flow Optimization of Large Two Stroke Marine Diesel Engine Piston Ring Packs
- Author
-
Stark, Matthias, primary and Mittler, Richard, additional
- Published
- 2016
- Full Text
- View/download PDF
27. Das Gerichtsprotokollbuch der Herrschaft Blumenegg von 1614 bis 1638 als regionalgeschichtliche Quelle
- Author
-
Stark, Matthias
- Abstract
Im Zentrum dieser Untersuchung steht das Protokollbuch des Niedergerichtes Blumenegg aus dem ersten Drittel des 17. Jahrhunderts als regionalgeschichtliche Quelle. Diese Protokolle werden als schriftliches Zeugnis gerichtlicher Praxis von 1614 bis 1638 mittels geschichtlich kontextualisierter quantitativer und qualitativer Analyse mit dem Wissensstand der Forschung sowie mit zeitgenössischen (verschriftlichten) Rechtsnormen auf Differenz und Kongruenz überprüft. Die der Analyse vorangestellten Kapitel der historischen Kontexualisierung dienen somit auch als Vergleichsgröße. Dadurch sollen die historischen Kenntnisse dieser Region im Allgemeinen und des Nieder- gerichtes eben da im Besonderen erweitert, korrigiert und detailliert werden. Einerseits werden Rolle und Funktion des Niedergerichtes ausgearbeitet, wozu neben quantitativer Argumente vor allem die qualitativen Fallstudien der Ehrenbeleidigungen tragend sind. In Verbindung mit der Funktion steht auch die Frequenz, der Austragungsort und im Weiteren die Bedeutung dieser Gerichtstagungen. Die gerichtsvorsitzende Rolle der Ammänner wird durch die prominente Stellung des Vogtes als Stellvertreter der Herrschaft relativiert. Dadurch erhält die These des Gerichtswesens in den Händen der Bevölkerung prinzipielle Kratzer, trotzdem nahm sie sich weiterhin volksnah und den Untertanen wohl gesonnen an. Die zwei regulären Zeitgerichtsstandorte Bludesch und Raggal stellen die deutlichste Differenz zur Fachlitertur dar. Darin ist nicht nur die theoretische Gleichwertigkeit dieser zwei Gerichtsorte zu lesen, sondern dies ist auch Teil einer längeren Entwicklung einer politischen Verwaltung, die auf Personenverbänden aufbaute, zu mehr territorial ausgerichteten Organisationsprinzipien. Andererseits wird in quantitativer Manier beantwortet mit welchen Anliegen Menschen des 17. Jahrhunderts ihr lokales Gericht aufgesucht haben. Sofern es eine schriftliche Verordnung gab, werden Norm und Praxis der Rechtsprechung gegenübergestellt. Dies betrifft in erster Linie das Erbrecht aber in abgeschwächter Form auch die Handhabung der Gantgeschäfte. Die Fallstudien zu Ehrenhändel decken sich mit den Ergebnissen der internationalen Forschung und bieten Einblicke in die Lebenswelt der Menschen., The beginning and end of this work lies within the lines of the lower court’s protocol from Blumenegg dating back to the early 17th Century. Representing the final and only remaining written evidence of the juridical practice, the protocol is analyzed in quantitative and qualitive regards to gain knwoledge about the remote region of Blumenegg in general and the lower court thereof in particular. The conclusions drawn from these analyses review the current state of knowldege and also compare juridical norm and practice of the time. Thus, the funciton and capacity of the court and its personnel shall be scrutinized. Besides quantitative arguments, it is the knowledge drawn from the qualitive case studies that try to answer these questions. Closely linked to the function is the frequency, place, and furthermore the relevance of these court sittings. Due to the steward’s (Vogt) prominent role in the protocol, the picture of the low justice being in the hands of the company must be put into perspective. Despite this theoretical justice through the authorities rather than an elected representative of the people, the lower court of Blumenegg still was mild in its verdicts towards its subjects and was a balance oriented peacekeeping institution. The (theoretical) equal status of the two regular legal domiciles Bludesch and Raggal constitute a major difference compared to the state of research. This equality of these legal domiciles is arguably part of a greater development. The administration based on associations of persons becomes gradually replaced by a more territorial organizing principle. Apart from that, this paper tries to answer in a quantitative manner which and what kind of matters the local people brought to court. Provided a written award (Weistum) or legal norm in general existed, juridical norm and practice are being compared and contrasted. This affects the law of inheritance in the main, but also the letters of auction’s (Gantbriefe) practice. The case studies dealing with affairs of honour correspond with the results of international research and provides insights into the experience realm of the 17th Century people in Blumenegg.
- Published
- 2013
- Full Text
- View/download PDF
28. Variation in size of blood puddles on different surfaces
- Author
-
Kreutziger, Janett, primary, Haim, Andreas, additional, Jonsson, Kim, additional, Wenzel, Volker, additional, Stark, Matthias, additional, and Nussbaumer, Walter, additional
- Published
- 2014
- Full Text
- View/download PDF
29. Brasilien - zwei Brücken für São Paulo
- Author
-
Wolf, Helmut, primary, Gausmann, Andreas, additional, Kotz, Peter, additional, Martins, Tomás Mendes, additional, and Stark, Matthias, additional
- Published
- 2014
- Full Text
- View/download PDF
30. Duldungsverhalten, Ovulationsverlauf und Konzeptionsergebnisse von Jung- und Altsauen nach Ovulationssynchronisation in verschiedenen Behandlungsvarianten
- Author
-
Stark, Matthias and Universität Leipzig
- Subjects
Fruchtbarkeit, biotechnische Fortpflanzungssteuerung, Schwein, Ultraschall ,ddc:610 ,Tiermedizin - Abstract
In der Schweineproduktion stellt die Anwendung biotechnischer Maßnahmen zur Steuerung des Reproduktionsgeschehens ein Mittel zur Verbesserung des betrieblichen Managements und der Produktivität dar. Dabei soll die Nutzung der eingesetzten Hormone möglichst auf ein notwendiges Maß reduziert werden. Ziel der Studie war es, unter Einsatz der transkutanen Sonographie weitere Erkenntnisse über das Duldungsverhalten und den Ovulationsverlauf unter besonderer Berücksichtigung verschiedener Behandlungsvarianten der Ovulations-synchronisation mit terminorientierter Besamung bei Jung- und Altsauen zu gewinnen. Der Befruchtungserfolg in Abhängigkeit von der verwendeten Behandlungsvariante der ovulationssynchronisierten Sauen sollte zusätzlich Rückschlüsse auf das Behandlungsmanagement liefern. Im ersten Teil der Studie wurde das Brunst- und Ovulationsverhalten sowie die Konzeptionsrate von 1742 Jung- und Altsauen zweier Landwirtschaftsbetriebe analysiert. Hierbei wurden die Sauen nach verschiedenen zur Zeit üblichen biotechnischen Behandlungsvarianten der Ovulationssynchronisation mit terminorientierten Besamung behandelt. Die Befunderhebung erfolgte mittels zweimal täglicher Kontrolle der Brunstsymptome zum Zeitpunkt der Inseminationen. Der Ovulationsverlauf sowie die Konzeptionsrate am 30. Trächtigkeitstag wurde durch die Anwendung der transkutanen Sonographie am unbeeinflußten, stehenden Tier bestimmt. Alle Jungsauen des Praxisbetriebes A wurden einer 15tägigen Zyklusblockade durch das Progestagen Altrenogest (Regumate®, Roussel Uclaf) unterzogen. Die Brunst-stimulation erfolgte bei den Jungsauen 24 Stunden nach der letzten Regumate®-Gabe und bei den Altsauen 24 Stunden nach dem Absetzen mittels einer intra-muskulären PMSG-Applikation. Zur Ovulationsinduktion wurde im Praxisbetrieb A einerseits 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) und andererseits 25 µg des GnRH-Analogons D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) entsprechend der Behandlungsvariante verabreicht. Das Zeitintervall zwischen den beiden Injektionen betrug bei den Jungsauen 80 Stunden und bei den Altsauen 58 Stunden. Im Betrieb B erfolgte eine Unterteilung der Altsauen in Tiere nach dem 1. Wurf (primipare Sauen, n = 214) und Sauen mit mehr als 2 Würfen (WNr. 3-11), da in diesem Betrieb bei den primiparen Sauen ein modifiziertes biotechnisches Verfahren angewendet wurde. Zur Ovulationsinduktion der Jungsauen und der primiparen Sauen im Praxisbetrieb B wurden 50 µg des GnRH-Analogons Gonavet® eingesetzt. Die Altsauen dieses Betriebes erhielten 25 µg Gonavet® zur Ovulationsinduktion. In diesem Versuchsabschnitt wurde der Einfluß verschiedener Intervalle zwischen der PMSG- und Gonavet®-Applikation geprüft. Das Zeitintervall betrug entsprechend der Versuchsvarianten bei den Jungsauen 80 bzw. 76 Stunden, bei den Altsauen mit mehr als zwei Würfen 58 bzw. 54 Stunden und bei den primiparen Sauen 72 bzw. 68 Stunden. Die beiden Inseminationen wurden jeweils 24 und 40 Stunden nach der Ovulationsinduktion durchgeführt. Im experimentellen Teil der Studie erfolgte die Analyse des Duldungsverhaltens, des Ovulationsverlaufes sowie die Beurteilung der Uteri und der Ovarien am 10. Tag nach der zweimaligen terminorientierten Besamung bei 79 Jungsauen der Deutschen Landrasse. Die Jungsauen wurden in vier Gruppen aufgeteilt. Die Versuchstiere der ersten drei Behandlungsvarianten erhielten zur Brunstsynchronisation über 15 Tage eine tägliche Dosis von 20 mg Altrenogest (5 ml Regumate®). Die Brunststimulation mittels 800 IE PMSG erfolgte entsprechend der Behandlungsvarianten 24, 36 bzw. 48 Stunden nach der letzten Regumate®-Gabe. In der vierten Versuchsvariante wurde den Jungsauen zur Zyklusblockade täglich 16 mg Altrenogest (4ml Regumate®) über das Kraftfutter verabreicht. Die PMSG-Applikation erfolgte 24 Stunden nach der letzten Regumate®-Gabe intramuskulär. Bei allen Jungsauen der experimentellen Versuchsdurchführung wurde die Ovulationsinduktion 80 Stunden nach der Brunststimulation mittels 500 IE hCG durchgeführt. 24 bzw. 40 Stunden nach der Ovulationsinduktion erfolgte die 1. bzw. 2. Insemination. Das Duldungs-verhalten wurde durch die zweimalige tägliche Kontrolle der Brunstsymptome in Anwesenheit eines fertilen Ebers erfaßt. Der Ovulationsverlauf sowie die Konzeptionsrate am 30. Trächtigkeitstag wurde durch die Anwendung der trans-kutanen Sonographie am unbeeinflußten stehenden Tier bestimmt. Nach der Schlachtung am 10. Tag nach der 1. Insemination wurden die Uteri gewogen und die Embryonen aus den Uterushörnern gewonnen. Desweiteren wurden die ovariellen Funktionskörper beurteilt und quantifiziert. Insgesamt konnten folgende Ergebnisse erzielt werden: · Untersuchungen in den Praxisbetrieben - Bei den Jung- und Altsauengruppen im Praxisbetrieb A konnte durch die Anwendung des GnRH-Analogon D-Phen6-LHRH (Gonavet®) zur Ovulations-induktion ein besseres Duldungsverhalten und ein stärkerer Synchronisations-effekt der Ovulation gegenüber dem Gonadotropin hCG festgestellt werden. Gleichfalls wurde durch die Verwendung des GnRH-Analogons eine höhere Konzeptionsrate erzielt. - Im Praxisbetrieb B wurde ein stärkeres Duldungsverhalten, eine geschlossenere Ovulation sowie eine um 13 % höhere Konzeptionsrate (84,1 %) der Jungsauen mit einem Zeitintervall: Brunststimulation - Ovulationsinduktion von 80 Stunden gegenüber den Tieren mit einem Zeitintervall von 76 Stunden ermittelt. - Durch die Verkürzung des Zeitintervalls zwischen der PMSG- und Gonavet®-Applikation von 58 auf 54 Stunden wurde bei den Altsauen mit mehr als 2 Würfen und einer 5wöchigen Säugezeit ein Anstieg der Variabilität im Ovulationsverlauf sowie eine um 1 % geringere Konzeptionsrate (80,7 %) beobachtet. - Auch bei einer Säugezeit von 5 Wochen sollte das Brunststimulations - Ovulationsinduktions-Intervall 72 Stunden bei den primiparen Sauen des Praxis-betriebes B betragen, da durch die Verlängerung des Zeitintervalls von 68 auf 72 Stunden eine bessere Synchronisation der Ovulation und eine um 11 % höhere Konzeptionsrate (83,9 %) festgestellt wurde. · Experimentelle Untersuchungen der Jungsauen - Durch die Verabreichung von 20 mg Altrenogest (5 ml Regumate®) gegenüber einer Dosierung von 16 mg Altrenogest (4 ml Regumate®) ist eine stärkere Synchronisation des Zyklus und ein geringerer Anteil von Jungsauen mit Zysten zu verzeichnen. - Das Zeitintervall zwischen letzter Brunstsynchronisation und Brunststimulation sollte 36 bzw. 48 Stunden betragen, da hierdurch bis zu 2,5 Embryonen mehr je Tier und eine bis zu 30 % geringerer Sauenanteil mit Zysten gegenüber den Jungsauen mit einem Intervall zwischen der PMSG- und GonavetÒ-Applikation von 24 Stunden ermittelt wurde. Durch die Untersuchung des Duldungsverhaltens und des Ovulationsverlaufes der Jung- und Altsauen war eine Einschätzung der Behandlungsvarianten der Ovulationssynchronisation mit terminorientierter Besamung unter praktischen und experimentellen Bedingungen möglich. Hierbei stellte die transkutane Sonographie 2 Stunden vor der 1. Insemination und 2 Stunden nach der 2. Insemination eine zuverlässige Methode dar, den termingerechten Ovulationszeitpunkt zu überprüfen. Das Duldungsverhalten und der Ovulationsverlauf sollten immer im Zusammenhang betrachtet werden, um die aus der biotechnischen Beeinflussung resultierenden Effekte richtig einschätzen zu können. In pig production the use of biotechnical methods to control the reproduction proces is a way to improve farm management factors and productivity. At the same time the use of hormones should be reduced to a minimum. The aim of the study was to gain further information on oestrus behaviour and the ovulation interval after different treatments of hormonally synchronized ovulation using fixed-time insemination of gilts and sows with transcutaneous sonography. The fertilization rate after the chosen treatment of synchronized sows should supply additional information for the different methods of treatment. In the first part of the study the oestrus behaviour and ovulation as well as the fertilization rate was analysed in 1742 gilts and sows on two animal farms. These farms use some of the current biotechnical treatments such as synchronization of ovulation by fixed-time insemination. Oestrus check was performed twice a daily to ascertain the time of insemination. The ovulation interval as well as the fertilization rate on the 30th day of pregnancy was determined using transcutaneous sonography on standing animals. Through using progestagene Altrenogest (Regumate®, Roussel Uclaf) all gilts of farm A underwent oestrus cycle suppression for 15 days. Oestros was induced using intramuscular PMSG injection administered in the gilts 24 hours after their last Regumate® dose and in sows after weaning. To induce ovulation, 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) or 25 µg of the GnRH-analogue D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) were given corresponding to the treatments on farm A. The interval between both injections was 80 hours for gilts and 58 hours for sows. On farm B the sows were divided into two groups; sows after the first parity (primiparous sows, n = 214) and sows with more then parity 2 (parity range 3 to 11), because the biotechnical treatment on primiparous sows was modified on this farm. Induction of ovulation in gilts and primiparous sows was produced using 50 µg of GnRH-analogue Gonavet®. The sows (parity range 3 to 11) on the farm received 25 µg Gonavet® to induce ovulation. In this part of the trial the affect of different time intervals between the PMSG and Gonavet® dose was compared. The time interval was 80 or 76 hours for gilts, 58 or 54 hours for sows with more than two parities, and 72 or 68 hours for primiparous sows depending on the treatment. Two inseminations were carried in each gilt or sow out 24 and 40 hours after induction of ovulation. In the experimental part of the study oestrus behaviour, ovulation interval, and evaluation of uteri and the ovaries were analysed on 79 German Landrace gilts 10 days after the fixed-time inseminations. The gilts were divided into four groups according to the treatment methods. Three groups received a daily dose of 20 mg Altrenogest (5 ml Regumate®) over 15 days to synchronise oestrus. All three groups received 800 IE PMSG for induction of oestrus, but either 24, 36 or 48 hours after the last Regumate® dose respectively. The gilts in the fourth group were treated with a daily dose of 16 mg Altrenogest (4ml Regumate®) to suppress the oestrous cycle and were fed concentrates. The PMSG dose was given intramuscular 24 hours after the last Regumate® dose. All gilts of the experimental part of the trial received an injection with 500 IE hCG to induce ovulation 80 hours after oestrus induction. The 1st and 2nd insemination were performed 24 and 40 hours respectively after the induction of ovulation. The oestrus behaviour was examined by an oestrus check in presence of a fertile boar twice daily. The ovulation interval as well as the fertilization rate on the 30th day of conception was analysed using transcutaneous sonography on standing animals. All tested animals were slaughtered 10 days after the 1st insemination. The uteri were weighed and the embryos from the uterine horns were collected. The ovarian functional bodies were assessed and counted. In conclusion, the following results were achieved: · Investigation on the farms - GnRH-analogue D-Phen6-LHRH (Gonavet®) produced better oestrus behaviour and a stronger effect of synchronization of ovulation were observed in the gilt and sow groups on farm A compared to the use of gonadotrophin hormone hCG for induction of ovulation. Also a higher fertilization rate was achieved through administration of the GnRH-analogue. - For the gilts on farm B there was stronger oestrus behaviour, independent ovulation and a 13 % higher fertilization rate (84,1 %) from the 80 hours interval between oestrus induction and induction of ovulation compared to gilts with time interval of 76 hours. - For the sows with more than two parities and a 5 week suckling time, a greater variation of the ovulation interval and a 1 % lower fertilization rate (80,7 %) were observed when the time interval of PMSG and Gonavet® application was reduced from 58 to 54 hours. - Increasing the time interval between oestrus induction and induction of ovulation from 68 hours to 72 hours peoduced greater synchronization of ovulation and 11 % higher fertilization rate. Thus the time interval between oestrus induction and induction of ovulation for primiparous sows with a suckling time of 5 weeks on farm B should be 72 hours. · Experimental investigations on gilts - Greater synchronization of oestrous cycle and a decreased number of gilts with ovarian cysts were observed after administration of 20 mg Altrenogest (5 ml Regumate®) compared to a dose of 16 mg Altrenogest (4 ml Regumate®). - The time interval between the last oestrus synchronization and the oestrus induction should be 36 or 48 hours, because up to 2.5 embryos per gilt and up to 30 % fewer gilts with ovarian cysts were found, compared to gilts with a time interval of 24 hours. The analysis of oestrus behaviour and of ovulation interval on gilts and sows enabled an evaluation of different methods to synchronize ovulation with fixed-time insemination under practical and experimental conditions. In this study the transcutaneous sonography 2 hours before the 1st insemination and 2 hours after the 2nd insemination was a reliable method to ascertain the correct time of ovulation. Oestrus behaviour and the ovulation interval should always be used together to estimate the effects resulting from biotechnical manipulations.
- Published
- 2000
31. Approaches for Dispatchable Biomass Plants with Particular Focus on Steam Storage Devices.
- Author
-
Stark, Matthias, Sonnleitner, Matthias, Zörner, Wilfried, and Greenough, Rick
- Subjects
- *
BIOMASS , *COGENERATION of electric power & heat , *STEAM , *ENERGY storage , *ELECTRIC power supplies to apparatus - Abstract
An increasing share of fluctuating energy generation leads to new challenges in power grids. In addition, the demand for flexible power plants is growing. Solid biomass-fueled combined heat and power (CHP) plants are able to get modified into dispatchable power plants. Boundaries for this operation mode are summarized and several measures to achieve a flexible power generation in biomass CHP plants are concluded. The integration of a high-temperature storage system for buffering the plants' steam seems to be the most promising, however, the least investigated option. The tasks and necessary features of such storage systems were investigated and an overview of available technologies and systems for the storage of steam is given. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
32. Duldungsverhalten, Ovulationsverlauf und Konzeptionsergebnisse von Jung- und Altsauen nach Ovulationssynchronisation in verschiedenen Behandlungsvarianten
- Author
-
Universität Leipzig, Stark, Matthias, Universität Leipzig, and Stark, Matthias
- Abstract
In der Schweineproduktion stellt die Anwendung biotechnischer Maßnahmen zur Steuerung des Reproduktionsgeschehens ein Mittel zur Verbesserung des betrieblichen Managements und der Produktivität dar. Dabei soll die Nutzung der eingesetzten Hormone möglichst auf ein notwendiges Maß reduziert werden. Ziel der Studie war es, unter Einsatz der transkutanen Sonographie weitere Erkenntnisse über das Duldungsverhalten und den Ovulationsverlauf unter besonderer Berücksichtigung verschiedener Behandlungsvarianten der Ovulations-synchronisation mit terminorientierter Besamung bei Jung- und Altsauen zu gewinnen. Der Befruchtungserfolg in Abhängigkeit von der verwendeten Behandlungsvariante der ovulationssynchronisierten Sauen sollte zusätzlich Rückschlüsse auf das Behandlungsmanagement liefern. Im ersten Teil der Studie wurde das Brunst- und Ovulationsverhalten sowie die Konzeptionsrate von 1742 Jung- und Altsauen zweier Landwirtschaftsbetriebe analysiert. Hierbei wurden die Sauen nach verschiedenen zur Zeit üblichen biotechnischen Behandlungsvarianten der Ovulationssynchronisation mit terminorientierten Besamung behandelt. Die Befunderhebung erfolgte mittels zweimal täglicher Kontrolle der Brunstsymptome zum Zeitpunkt der Inseminationen. Der Ovulationsverlauf sowie die Konzeptionsrate am 30. Trächtigkeitstag wurde durch die Anwendung der transkutanen Sonographie am unbeeinflußten, stehenden Tier bestimmt. Alle Jungsauen des Praxisbetriebes A wurden einer 15tägigen Zyklusblockade durch das Progestagen Altrenogest (Regumate®, Roussel Uclaf) unterzogen. Die Brunst-stimulation erfolgte bei den Jungsauen 24 Stunden nach der letzten Regumate®-Gabe und bei den Altsauen 24 Stunden nach dem Absetzen mittels einer intra-muskulären PMSG-Applikation. Zur Ovulationsinduktion wurde im Praxisbetrieb A einerseits 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) und andererseits 25 µg des GnRH-Analogons D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) entsprechend der Behandlungsvariante verabreich, In pig production the use of biotechnical methods to control the reproduction proces is a way to improve farm management factors and productivity. At the same time the use of hormones should be reduced to a minimum. The aim of the study was to gain further information on oestrus behaviour and the ovulation interval after different treatments of hormonally synchronized ovulation using fixed-time insemination of gilts and sows with transcutaneous sonography. The fertilization rate after the chosen treatment of synchronized sows should supply additional information for the different methods of treatment. In the first part of the study the oestrus behaviour and ovulation as well as the fertilization rate was analysed in 1742 gilts and sows on two animal farms. These farms use some of the current biotechnical treatments such as synchronization of ovulation by fixed-time insemination. Oestrus check was performed twice a daily to ascertain the time of insemination. The ovulation interval as well as the fertilization rate on the 30th day of pregnancy was determined using transcutaneous sonography on standing animals. Through using progestagene Altrenogest (Regumate®, Roussel Uclaf) all gilts of farm A underwent oestrus cycle suppression for 15 days. Oestros was induced using intramuscular PMSG injection administered in the gilts 24 hours after their last Regumate® dose and in sows after weaning. To induce ovulation, 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) or 25 µg of the GnRH-analogue D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) were given corresponding to the treatments on farm A. The interval between both injections was 80 hours for gilts and 58 hours for sows. On farm B the sows were divided into two groups; sows after the first parity (primiparous sows, n = 214) and sows with more then parity 2 (parity range 3 to 11), because the biotechnical treatment on primiparous sows was modified on this farm. Induction of ovulation in gilts and primiparous sows was produce
- Published
- 2004
33. Duldungsverhalten, Ovulationsverlauf und Konzeptionsergebnisse von Jung- und Altsauen nach Ovulationssynchronisation in verschiedenen Behandlungsvarianten
- Author
-
Stark, Matthias and Stark, Matthias
- Abstract
In der Schweineproduktion stellt die Anwendung biotechnischer Maßnahmen zur Steuerung des Reproduktionsgeschehens ein Mittel zur Verbesserung des betrieblichen Managements und der Produktivität dar. Dabei soll die Nutzung der eingesetzten Hormone möglichst auf ein notwendiges Maß reduziert werden. Ziel der Studie war es, unter Einsatz der transkutanen Sonographie weitere Erkenntnisse über das Duldungsverhalten und den Ovulationsverlauf unter besonderer Berücksichtigung verschiedener Behandlungsvarianten der Ovulations-synchronisation mit terminorientierter Besamung bei Jung- und Altsauen zu gewinnen. Der Befruchtungserfolg in Abhängigkeit von der verwendeten Behandlungsvariante der ovulationssynchronisierten Sauen sollte zusätzlich Rückschlüsse auf das Behandlungsmanagement liefern. Im ersten Teil der Studie wurde das Brunst- und Ovulationsverhalten sowie die Konzeptionsrate von 1742 Jung- und Altsauen zweier Landwirtschaftsbetriebe analysiert. Hierbei wurden die Sauen nach verschiedenen zur Zeit üblichen biotechnischen Behandlungsvarianten der Ovulationssynchronisation mit terminorientierten Besamung behandelt. Die Befunderhebung erfolgte mittels zweimal täglicher Kontrolle der Brunstsymptome zum Zeitpunkt der Inseminationen. Der Ovulationsverlauf sowie die Konzeptionsrate am 30. Trächtigkeitstag wurde durch die Anwendung der transkutanen Sonographie am unbeeinflußten, stehenden Tier bestimmt. Alle Jungsauen des Praxisbetriebes A wurden einer 15tägigen Zyklusblockade durch das Progestagen Altrenogest (Regumate®, Roussel Uclaf) unterzogen. Die Brunst-stimulation erfolgte bei den Jungsauen 24 Stunden nach der letzten Regumate®-Gabe und bei den Altsauen 24 Stunden nach dem Absetzen mittels einer intra-muskulären PMSG-Applikation. Zur Ovulationsinduktion wurde im Praxisbetrieb A einerseits 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) und andererseits 25 µg des GnRH-Analogons D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) entsprechend der Behandlungsvariante verabreich, In pig production the use of biotechnical methods to control the reproduction proces is a way to improve farm management factors and productivity. At the same time the use of hormones should be reduced to a minimum. The aim of the study was to gain further information on oestrus behaviour and the ovulation interval after different treatments of hormonally synchronized ovulation using fixed-time insemination of gilts and sows with transcutaneous sonography. The fertilization rate after the chosen treatment of synchronized sows should supply additional information for the different methods of treatment. In the first part of the study the oestrus behaviour and ovulation as well as the fertilization rate was analysed in 1742 gilts and sows on two animal farms. These farms use some of the current biotechnical treatments such as synchronization of ovulation by fixed-time insemination. Oestrus check was performed twice a daily to ascertain the time of insemination. The ovulation interval as well as the fertilization rate on the 30th day of pregnancy was determined using transcutaneous sonography on standing animals. Through using progestagene Altrenogest (Regumate®, Roussel Uclaf) all gilts of farm A underwent oestrus cycle suppression for 15 days. Oestros was induced using intramuscular PMSG injection administered in the gilts 24 hours after their last Regumate® dose and in sows after weaning. To induce ovulation, 500 IE hCG (Ekluton® 1500, Vemie Veterinär Chemie) or 25 µg of the GnRH-analogue D-Phen6-LHRH (Gonavet®, Veyx Pharma GmbH) were given corresponding to the treatments on farm A. The interval between both injections was 80 hours for gilts and 58 hours for sows. On farm B the sows were divided into two groups; sows after the first parity (primiparous sows, n = 214) and sows with more then parity 2 (parity range 3 to 11), because the biotechnical treatment on primiparous sows was modified on this farm. Induction of ovulation in gilts and primiparous sows was produce
- Published
- 2004
34. Abscheideverhalten der Hochdruck-Wasserabscheider des Erdgasspeichers Berlin
- Author
-
Stark, Matthias, primary, Schneider, Armin, additional, Martini, Lothar, additional, Stark, Bernd, additional, Swientek, Stephan, additional, and Nitzsche, Rolf, additional
- Published
- 2003
- Full Text
- View/download PDF
35. Mobile Fahrzeug-Waschanlagen für Bus und Bahn.
- Author
-
Stark, Jürgen and Stark, Matthias
- Subjects
- *
CLEANING equipment , *BUSES - Abstract
The article evaluates mobile vehicle washing equipment for bus and trains manufactured by Stark Reinigungsgerate GmbH.
- Published
- 2019
36. PERFORMANCE ANALYSIS OF MACHINE TOOLS.
- Author
-
BLEICHER, Friedrich, DORN, Christoph, and STARK, Matthias
- Subjects
- *
MACHINERY , *TOOLS , *ENERGY consumption , *TECHNOLOGY , *POWER resources , *INDUSTRIAL engineering , *ENGINEERING , *METROLOGY , *FORCE & energy - Abstract
The energy required by a machine tool to produce a product is mostly used by the main and auxiliary processes. Often it is not known how much energy each process consumes. Using a metrological method, this data is collected and analyzed. Processes under load and idle are evaluated. A special work piece was constructed for these evaluations. Current data show that in contrast to the auxiliary processes the energy used during the main processes is low. Researchers want to use this data to improve the efficiency of machine tools. For energy efficient production in the area of industrial engineering, the focus needs to be placed on auxiliary processes at machine tools, it is all about saving energy. [ABSTRACT FROM AUTHOR]
- Published
- 2009
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.